Engineering Commons^™

In-Cage Surface Wetting System For Cooling Poultry In Transport, Ryan Clark

Biological and Agricultural Engineering Undergraduate Honors Theses

Abstract

Poultry health and mortality rates are important considerations in poultry production, as companies can minimize product loss and appeal to a consumer base whose concern for animal welfare continues to grow. Although animal welfare is a consideration for the entire poultry production process, this project focuses on the live-haul phase of the process, specifically during transport from grow houses to processing facilities. During the summer months, broiler chickens being transported can suffer from heat stress that can lead to death. This project consists of the designing and testing of an in-cage surface wetting system to minimize heat stress incidents …

Assessing Auto-Flocculation Of Microalgae In Wastewater Treatment, Alexander Parr

Biological and Agricultural Engineering Undergraduate Honors Theses

Biofuels produced from algae have the prospect to provide a cheap, carbon neutral alternative to fossil fuels. However, the high cost for harvesting algae limits its wide application, as the preferred algae strains for biofuel production are typically unicellular microalgae that do not settle in water very well. Recently, researchers have been focusing on developing a biological method to achieve the sedimentation of algae through flocculation. A recent study has concluded that introducing microalgae that self-flocculates increases the recovery of the desired microalgae, similar to the effect of using coagulant to flocculate the algae. This option can potentially be more …

Performance Assessment Of Solid State Anaerobic Digestion Of Poultry Litter, Mason Puckett

Biological and Agricultural Engineering Undergraduate Honors Theses

The disposal of poultry litter can exert an economic and environmental burden to the agriculture community. As a result, it is desirable to reduce the amount of waste and recover resources from the waste. This study focuses on the construction and preliminary testing of a laboratory scale (20 L) solid state anaerobic digester (AD) fed with dry poultry litter. Glucose was added in addition to the poultry litter to achieve the appropriate C:N ratio to support the growth of anaerobic microorganisms. The AD was first fed every 4 days at 4 g VS/L/feeding for 24 days, rested (no feeding) for …

Chloride Salt Inhibition On Lipid Production In Wastewater-Grown Algae For Biofuel Production, Will Richardson

Biological and Agricultural Engineering Undergraduate Honors Theses

Algae are increasingly being recognized as useful organisms for many applications in today’s world. Their ability to remove nitrogen, phosphorus, and trace metals from water while adding oxygen to water makes them an attractive tertiary treatment technology in municipal wastewater treatment facilities. At the same time, algae produce lipids and carbohydrates that are useful for biofuel production, and they are not a human food crop unlike many biofuel feedstocks. In this study the effect of increased chloride concentrations in wastewater was assessed on the ability of two species of algae, Chlorella vulgaris and Scenedesmus dimorphus, to function as a …

Automated Control System Design Manual For Plant Growth And Support, Brooke Benham

Biological and Agricultural Engineering Undergraduate Honors Theses

The “Automated Control System Design Manual for Plant Growth and Support” project contains a teaching manual for high school students and teachers to use to aid in teaching STEM subjects. Building confidence in students and encouraging the pursuit of STEM related fields is one of the primary functions. This project utilizes low cost instruments and freely available software to teach the construction, installation, programming, and application for an automated control system with emphasis on plant growth and regulation. The end result is a fully automated system that can be controlled wirelessly via an android application to monitor temperature, humidity, and …

Analysis Of Lid Implementation To Combat Flooding And Erosion At The University Of Arkansas Campus, Madison E. Crowl

Biological and Agricultural Engineering Undergraduate Honors Theses

The city of Fayetteville, Arkansas has experienced rapid urbanization throughout recent years as it continues to grow. Within the city, the University of Arkansas has been constantly expanding, with increased impervious surfaces as more parking lots and facilities are built. This has caused issues including flooding and stream bank erosion, specifically in Mullins Creek, which receives runoff from a large part of campus. A portion of the creek was restored, but there are still downstream issues. Low Impact Development (LID) is a type of green infrastructure that has been shown to decrease runoff and increase infiltration. EPA SWMM, a hydrologic …

Cfd Model For Ventilation In Broiler Holding Sheds, Christian Heymsfield

Biological and Agricultural Engineering Undergraduate Honors Theses

Broiler production in Arkansas was valued at over $3.6 billion in 2013 (University of Arkansas Extension of Agriculture). Consequently, improvement in any phase of the production process can have significant economic impact and animal welfare implications. From the time poultry leave the farm and until they are slaughtered, they can be exposed to harsh environmental conditions, both in winter and in summer. After road transportation, birds are left to wait in holding sheds once they arrive at the processing plant, for periods of approximately 30 minutes to two hours. This project was interested in this holding shed waiting time during …

Minimizing Ethanol Concentration In Organosolv Pretreatment For The Saccharification Of Loblolly Pine, Nelson B. Heringer

Biological and Agricultural Engineering Undergraduate Honors Theses

Organic solvent pretreatment, commonly known as organosolv, is a method used to prepare biomass for enzymatic hydrolysis for the production of biofuels. This method common uses ethanol as the organic solvent. However, this creates an economic issue with the product stream, as ethanol becomes a product and input. This project sought to explore how decreasing the use of ethanol in organosolv pretreatment affected the recoverability of sugars after enzymatic hydrolysis. Loblolly pine (Pinus taeda L.) was pretreated at 170 °C for 60 minutes in 1% dilute sulfuric acid and an ethanol concentration varying from 65% to 35%. Compositional …

Municipal Composting And Organic Waste Diversion: The Case Of Fayetteville, Arkansas, Michael E. Hoppe

Biological and Agricultural Engineering Undergraduate Honors Theses

It is estimated that 40% of food is wasted in the United States; representing $165 billion in wasted resources. A vast majority of that wasted food is ultimately placed in landfills where it decomposes and releases harmful greenhouse gases (GHGs). In fact, food waste alone is responsible for 23% of annual methane emissions for the US. This has a huge impact on global climate change due to the potency of methane as a greenhouse gas. Currently only 5% of the food waste produced is recovered across the nation. Source reduction would be the best solution to reducing this food waste, …

Antimicrobial Effects Of Pine Essential Oil Against Listeria Monocytogenes, Elizabeth Louise Marhefka

Biological and Agricultural Engineering Undergraduate Honors Theses

Short leaf and loblolly pine were harvested in May 2014 and June 2014, respectively, at the University of Arkansas Monticello in Monticello, Arkansas. Short leaf and loblolly essential oils were prepared by hydrodistillation, using a Clevenger apparatus. Essential oils were extracted at separate times and showed different concentrations of the components α-pinene, β- pinene, 3-carene, limonene, and terpineol. Pine essential oil samples were tested through disc diffusion assay for antimicrobial activity against Listeria monocytogenes. This was done by placing ten μL of each essential oil sample on a paper disc on an agar plate that was inoculated with L. monocytogenes …

Phosphorus Flux From Bottom Sediments In New Spiro Lake, Oklahoma, Katherine Smith

Biological and Agricultural Engineering Undergraduate Honors Theses

Phosphorus loads to water bodies consist of external flux from the watershed and internal flux from the bottom sediments. In this study, the specific objectives were to measure the internal phosphorus flux from bottom sediments under aerobic and anaerobic conditions and determine the effectiveness of various rates of alum treatment on sediment phosphorus release. Eight intact sediment cores from New Spiro Lake were incubated under aerobic and anaerobic conditions for 41 days at room temperature. The cores were treated in the middle of incubation with alum (aluminum sulfate) and sodium aluminate at a ratio of 2:1, ranging from 0.05 to …

Minimizing Wash Water Usage After Acid Hydrolysis Pretreatment Of Biomass, Noaa Frederick

Biological and Agricultural Engineering Undergraduate Honors Theses

Abstract Dilute acid pretreatment, needed to prepare biomass for saccharification, results in the production of a number of byproducts, which inhibit subsequent enzymatic hydrolysis and fermentation steps. In order to improve saccharification yields in the enzyme hydrolysis step, the pretreated biomass is often rinsed with room temperature water to remove these byproducts. High-density poplar was pretreated with 1% dilute sulfuric acid at 140 ºC for 40 minutes. After pretreatment the biomass was washed with water volumes equal to 0, 1 ½, or 3 times the biomass volume. The rinsed biomass was then enzymatically hydrolyzed and the concentrations of byproducts and …

Aquatic Bacteria Removal Using Carbon Nanotubes, Suvish Melanta

Biological and Agricultural Engineering Undergraduate Honors Theses

The purpose of this project is to explore the functionality of carbon nanotubes as a bacterial removal method, specifically towards water-borne bacterial pathogens in wastewater by utilizing its unique magnetic and bacteria-binding properties. The general protocol set for this research follows five steps: 1) Preparation of wastewater media, 2) preparation of CNT culture, 3) preparation of reaction mixture with CNTs for bacterial binding, 4) magnetic separation of bacteria-bound-CNT clusters and, 5) assessment of supernatant. The CNTs effectively removed bacterial contaminants in the wastewater (10%, v/v) after the sand filtration process from the Paul R. Noland Wastewater Facility at Fayetteville, Arkansas. …