Engineering Commons^™

The Travel And Tourism Competitiveness Index: Examining The Reciprocal Relationship Among The Ttci Factors Relative To Porter’S (1998) Diamond Model And Airline Passenger Seat Capacity For The Countries Of The World, Hani Abdullah

Theses and Dissertations

The current study tested the application of Porter's (1998) diamond model of international competitiveness to the travel and tourism (T&T) industry by examining the relationship among the 14 factors of the travel and tourism competitiveness index (TTCI) to the model's four dimensions. The assignment of TTCI factors to these dimensions was guided by Dwyer and Kim (2003) and Ritchie and Crouch (2010). The study also examined the relationship between TTCI factors and airline passenger seat capacity, which was measured as the per capita annual average of weekly available seat kilometers. The sample comprised 136 countries, which represented 70% of the …

Computational Model For Pedestrian Movement And Infectious Diseases Spread During Air Travel: A Molecular Dynamics-Like Numerical Approach, Pierrot Derjany

Doctoral Dissertations and Master's Theses

There is direct evidence of the transmission of fatal infectious pathogens in large human gatherings. Air transportation is no exception. The mixing of susceptible and infectious individuals in this high-density man-made environment involves pedestrian movement which is generally not taken into account in modeling studies of disease dynamics. This thesis addresses this problem through a multiscale model that combines pedestrian dynamics with stochastic infection spread models. This generic model is applicable to several directly transmitted diseases. Through this multiscale framework, the effectiveness of certain layout and strategies in suppressing the disease spread in highly crowded locations such as airplanes, airports …

A Step Toward Ending Long Airport Security Lines: The Modified Boarding Pass, Joel Lee

Doctoral Dissertations and Master's Theses

Anyone who has traveled by air has most likely experienced long airport security lines. Yet not much is known about its cause because few have considered if passengers have created this problem for themselves. The present study attempts to fill this research gap by suggesting that when passengers are not well-prepared for security screening, they delay the process by making mistakes and not complying with procedures. This lack of preparedness can be attributed to several shortcomings of security signposts. This study proposes the use of a modified boarding pass as an alternative form of signage to help passengers better prepare …

Damage Resistance And Tolerance Of 3d Woven Composites, Justin T. Mcdermott

Electronic Theses and Dissertations

Composite materials have been adopted into primary aircraft structures by virtue of their great strength-to-weight and stiffness-to-weight ratios, fatigue insensitivity, and corrosion resistance. These characteristics are leveraged by aircraft designers to deliver improved fuel effciency and reduced scheduled maintenance burdens for their customers. These benefits have been impressively realized in the Boeing 787 and Airbus A350 XWB, with airframes utilizing about 50% composites by weight. Tempering these successes, however, are the inherent vulnerabilities of carbon-fiber reinforced composites. When compared to conventional metallic structure, composite laminates are more sensitive to stress concentrations at mechanical fastenings and damage due to low-velocity impact. …

Effects Of Musical Ability On Flight Planning, Situational Awareness, And Flight Path Deviations, Andrew P. Henry

Doctoral Dissertations and Master's Theses

Numerous studies have been conducted on music education and the benefits that learning an instrument has on the brain. However, there is little research that connects a pilot’s ability to play an instrument to a pilot’s ability to fly an airplane. When learning an instrument, students learn non-musical abilities, such as executive functions, which may correspond with the skills necessary to be a good pilot. The purpose of this study was to find a relationship between learning a musical instrument and pilot performance, specifically related to flight planning, situational awareness, and flight path deviations. This study was a quasi-experimental design …

Runway Incursions: Examining Airport Managers’ Perspectives Of The Challenges Related To Vehicle/Pedestrian Deviations, John Arthur Mahlman Jr.

Theses and Dissertations

The purpose of the current study was twofold: (a) to describe the contributing factors of vehicle and pedestrian deviation (V/PD) runway incursions (RIs) nationally, and (b) to describe what mitigation approaches/strategies airport managers recommend or find to be effective. The current study used a content analysis in identifying airports with more than 10 V/PD RIs within Fiscal Years (FY) 2011 to FY 2016. After the study population was identified, phenomenological design was used to poll airport executives of the previously identified airports. The 11 participants elected to either complete an anonymous survey or participate in a telephone interview. Spradley’s (2016) …

Electronic Word-Of-Mouth (Ewom): Examining The Relationship Between Factors Influencing Ewom Activities And Passengers’ Purchasing Involvement In The Context Of Aviation, Ratchada Ruenruoy

Theses and Dissertations

The purpose of the study was manifold: (a) to examine the relationship a set of targeted factors has on electronic Word-of-Mouth (eWOM) activities in the context of aviation, (b) to examine the extent to which these factors affect airline passengers’ purchasing involvement, and (c) to determine the extent to which eWOM activities mediate the relationship between the targeted factors and purchasing involvement. Research factors included (a) purchasing perceptions, which consisted of satisfaction, loyalty, perceived value, and service quality; (b) social environment, which consisted of age, gender, and cultural differences relative to Hofstede’s (1980) cultural dimensions; and (c) experiences, which consisted …

Assessing Impacts Of Decentralizing Airpower Command And Control, Allen Goodwin Peck

Doctoral Dissertations and Master's Theses

Centralized control is a fundamental tenet of joint airpower doctrine, yet there are operational situations in which some degree of decentralization may be appropriate. The purpose of this research was to quantitatively assess the impacts of decentralizing the command and control (C2) of airpower under varying operational conditions. The research used the experimental method to test hypotheses regarding decentralization of control. JAEX, a stochastic, attrition-based Blue-versus-Red war gaming model, generated the required data.

The mean difference between JAEX outcomes under centralized control and outcomes under decentralized control constituted the dependent variable for each experiment. The independent variables were the operational …

Benefits Of Additional Runway Crossings On Parallel Runway Operations, Sergio Ezequiel Taleisnik

Doctoral Dissertations and Master's Theses

As the air transportation industry expands, airports face numerous challenges to manage the increasing traffic. Among these problems, runway crossings are a considerable source of ground traffic inefficiency and risk. Building end-around taxiways are the only strategy to avoid crossings, but these are not always feasible, and therefore airport planners must find alternatives. This study consisted of a simulation over an airport that currently requires a vast amount of its arrivals to go through runway crossings in order to reach the apron; the airport simulation software utilized was the Total Airspace and Airport Modeler (TAAM). The process began with a …

Developing An Automation Locus Of Control Scale, Maarten Nelson Devon Edwards

Theses and Dissertations

The industrial and domestic proliferation of automation is such that it has become a core component of the human experience. Both automation design paradigms and human performance must be scrutinized in order to ensure the safety, security, effectiveness and efficiency of man-machine systems across a multitude of domains (Fitts, 1951; Parasuraman, Sheridan, & Wickens, 2000; Rasmussen, 1983). Therefore, the purpose of this study was to develop and validate a measure for the evaluation of control perceptions in the context of human-automation interactions. The scale was developed using a deductive approach to measure development adapting from Rotter (1966) and Levenson (1973) …

Modifying Casting Parameters To Improve The High Temperature Ductility Of Investment Cast Nickel-Based Superalloy Pwa 1455, Lars Alexander Hedin, Cole Magnum Introligator

Materials Engineering

PCC Structurals, an industry leader in superalloy investment castings, has observed inconsistencies in the stress rupture performance of polycrystalline nickel-based superalloy PWA 1455. PCC has changed their casting parameters to reduce the thermal gradient during cooling but have been unable to correlate these changes with an increase in stress rupture elongation. Metallographic examination of past samples indicated microstructures composed of non- equiaxed dendritic grains with mean diameter of .021 inches along the test axis. A similar study on polycrystalline superalloys has indicated that excessive superheat temperatures above the liquidus can result in large grains identical to those observed, limiting the …

Subscale Mars Colonization Mission, Cameron J. Lamack, James Lumsden, Sean Nevin, Donner Schoeffler, Riley Evers, Alexandra Poulakos, Skyler Tan, Anthony Keba, Siraj Zaman, Ali Altamimi, Anthony Modica

Honors Thesis

The team will compete in the SAE (Society of Automotive Engineers) Aero Design West Advanced Class competition, held 5-7th April 2019 in Van Nuys, California. The team will work to develop, through research, design, optimizational trade studies, and manufacturing, a system for the deployment of parasitic aircraft, as well as payload. The system will consist of a primary fixed-wing aircraft, parasitic autonomous gliders, a real-time altitude data acquisition system, as well as both static and releasable payload. The deployable gliders must navigate autonomously to a targeting area on the ground without any on-board propulsion. The releasable payload, which will consist …

Aviation Safety Action Program In The United States Air Force: Mobility Aircrews’ Intentions To Use Safety Reporting, Travis Jared Whittemore

Doctoral Dissertations and Master's Theses

No abstract provided.

A Behavioral Research Model For Small Unmanned Aircraft Systems For Data Gathering Operations, Paul Leonard Myers Iii

Doctoral Dissertations and Master's Theses

According to Hitlin (2017) of the Pew Research Center, only 8% of U.S. citizens own an unmanned aircraft. Additionally, regarding feelings if U.S. citizens saw an unmanned aircraft flying close to where they live, 26% say they would be nervous, 12% feel angry, and 11% are scared. As of March 9, 2018, there were 1,050,328 U.S. small unmanned aircraft system (sUAS) registrations compared to 947,970 November 29, 2017. While sUAS use has increased in the U.S., it has lagged when compared to other items for personal use available to U.S. citizens as 92% own cell phones (Anderson, 2015). This slower …

Aviation Sustainability, Elizabeth Gemmer

Honors Projects

Sustainability in aviation has become a prominent issue. There is a substantial amount of information on sustainability measures taken and discussed at the local and global levels. However, the information is spread out over a wide array of sources and many people are not aware of what is being done. There have been many past efforts to integrate sustainability into aviation, those efforts continue today and will continue into the future. Aviation is a rapidly growing industry; as the industry grows and there becomes even more of a need for sustainability measures to keep it a viable mode of transport, …

Aviation Professionalism: Examining The Concept Of Professionalism Within And Between Major Subgroups Of The Aviation Industry, Rüştü Tolga Turgut

Theses and Dissertations

The purpose of this study was to conduct a secondary analysis of Alhallaf’s (2016) study on aviation professionalism by disaggregating his data into five subgroups: Aircraft Maintenance Technicians (AMT); Airport Managers (AM); Air Traffic Controllers (ATC); Non-Pilot Aviation Employees (NPAE), which consisted of business aviation, flight operations, and aviation colleges/universities; and Pilots. The study posed three research questions and endeavored to (a) determine factors related to professionalism in each subgroup, (b) determine the differences in levels of professionalism among the subgroups, and (c) examine each subgroup’ perceptions of professionalism. The study used an explanatory correlational design to determine the relationship …

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

Unmanned Aerial System Integration Into The National Airspace System And Airports: Risk Mitigation Using Content Analysis Methodology, Bhoomin Bhupendrabhai Chauhan

Theses and Dissertations

Over the last few years, the use of unmanned aerial systems (UAS) has significantly increased. With an increase in the use of UASs, the number of UAS sightings near manned aircraft and airports have also increased, as shown by the Federal Aviation Administration (FAA)(FAA, 2019a). Although not every near sighting had a severe consequence associated with it, the risks were still present. As UASs are becoming more readily available to the general public, the risks present due to UASs flying in the National Airspace System (NAS) and near airports is also increasing. For the study, incident and accident reports were …

Factors Related To The Assessment Of The Effectiveness Of Environmental Management Systems (Ems) At Airports, Kainan Li

Theses and Dissertations

The purpose of this study was to identify factors that can be used to assess the effectiveness of EMS at airports in the United States (U.S.). A survey research methodology was used for this study in two phases. The first phase of the research study included a preliminary expert opinion survey of airport managers and other individuals acting in a supervisory role to determine and discuss how EMS help improve environmental performance, and ranked factors that may be related to assessing the effectiveness of EMS. The second survey was constructed based on feedback from these experts and targeted airport employees …

Mitigating Risk Tolerance Among General Aviation Pilots: Identifying Factors That Contribute To Ga Pilots’ Risk Perception, Nazif Sani Nuhu

Theses and Dissertations

The purpose of this study was to identify factors that contributed to general aviation (GA) pilots’ level of risk perception, which could then be manifested as an increase in risk tolerance. The study used an explanatory correlational design to determine what factors were related to risk perception. Research factors included gender, age, marital status, race/ethnicity, education level, flight hours, single- and multi-engine hours, hours as PIC, type of flight training, number of FAA licenses/ratings, number of hazardous events pilots were involved in, self-efficacy, aviation safety attitudes, level of psychological distress, and locus of control. The dependent variable was risk perception. …

Extreme Altitude Search And Rescue Helicopter, Matthew J. De Sieno, Anthony Chavarria, David Stuver, Zach Boss

Senior Design Project For Engineers

The goal of this design was to develop an extreme altitude rescue helicopter capable of retrieving hikers stranded on top of Mount Everest. Using the Eurocopter AS350 as a baseline, a conceptual model was produced that is fully capable of hovering and delivering forward flight at the desired altitude of 8,848 meters. Combined blade element momentum theory, proper airfoil selection, and forward flight calculations were utilized in order to optimize the rotor for the given flight conditions on top of Mount Everest. Conceptual fluid dynamics and CAD modeling aided in the process of visually designing the fuselage and rotor. Not …

Assessing The Effectiveness Of The Collegiate Aviation Safety Reporting System (Casrs) At Western Michigan University's College Of Aviation, Logan Brown

Honors Theses

Aviation is a safety focused industry that intends to continually improve safety. Many safety models have been created, but right now the most prominent model is the International Civil Aviation Organization’s (ICAO) Safety Management System (SMS). It has four components: safety policy, safety risk management, safety assurance, and safety promotion. NASA’s nationwide reporting system, the Aviation Safety Reporting System (ASRS) incorporates these four components, as does the program created by Western Michigan University’s College of Aviation. Termed the Collegiate Aviation Safety Reporting System (CASRS), it was created to bring NASA’s program to a local scale. This paper examines international safety …

Sensitivity Analysis Of An Airfoil Using Computational Fluid Dynamics, Itay Savion

Thinking Matters Symposium Archive

In fixed wing aircrafts, the variation of lift coefficient with the angle of attack is a major consideration. This project explores the variation of lift force and lift coefficient of an SD2030 airfoil as a function of the angle of attack, Raynolds number, size of the computational domain, length of the wing, and the fluid mesh size. The problem is modeled using the flow simulation (CFD) module of SolidWorks. The outcome of this sensitivity analysis is compared with available experimental data.

Building And Integrating An Information Security Trustworthiness Framework For Aviation Systems, Anna Baron Garcia

Doctoral Dissertations and Master's Theses

The aviation infrastructure is broadly composed of aircraft, air traffic control systems, airports and public airfields. Much attention has been given to physical security along the years this industry has been expanding; and now, in the new age of interconnection devices, a growing concern about cybersecurity has risen.

The never-ending improvement of new digital technology has given birth to a new generation of electronic-enabled (e-enabled) aircraft that implement a remarkable amount of new technologies such as IP-enabled networks, COTS (commercial off-the- shelf) components, wireless connectivity, and global positioning systems (GPSs). For example, aircraft manufacturers are building wireless systems to reduce …

Exploratory Analysis Of The Potential Use Of Augmented Reality In Aircraft Maintenance, Richard B. Keesling

Theses and Dissertations

During the last decade manpower constraints and an aging fleet, along with sustained war time operating tempo, have combined to place a significant strain on the Air Force maintenance community. Recent technological advances have enabled Immersive Technology to be applied to industrial applications in the commercial sector. This has sparked interest within the Air Force and generated various initiatives seeking to enhance readiness through the application of Immersive Technology. This research explores how Immersive Technology can be applied within the maintenance community. Semi-structured interviews were conducted to determine where the maintenance community shortfalls exist, if the available technology has the …

Product Development Process For Small Unmanned Aerial Systems, Jonathan D. Poole

Theses and Dissertations

The DoD has recognized the need for persistent Intelligence, Surveillance and Reconnaissance (ISR) over the last two decades. Recent developments with commercial drones have changed the market structure; there is now a thriving and extensive market base for drone based remote sensing. This research provides system engineering methods to support the DoD use of this burgeoning market to meet operational ISR needs. The three contributions of this research are: a process to support Small Unmanned Aerial Systems (SUAS) design, tools to support the design process, and tools to support risk assessment and reduction for both design and operations. The process …

Simulation And Piloted Simulator Study Of An Automatic Ground Collision Avoidance System For Performance Limited Aircraft, James D. Carpenter

Theses and Dissertations

The F-16 Automatic-Ground Collision Avoidance System (Auto-GCAS) has been a resounding success since implementation in Nov 2014, saving 8 pilots and 7 aircraft from Controlled Flight into Terrain (CFIT). However, there is no implemented Auto- GCAS for "heavy" performance limited aircraft. This research endeavors to expand on the success of F-16 Auto-GCAS to other aircraft in the Air Force inventory such as the C-130, C-17, and B-1. MIL-STD-1797 classifies performance limited aircraft as large, heavy, and low to medium maneuverability. Using a stitched Learjet-25D model (LJ-25D), an Auto-GCAS algorithm was developed to predict multiple escape-maneuver trajectories, compare these paths to …

Multi-Path Automatic Ground Collision Avoidance System For Performance Limited Aircraft With Flight Tests: Project Have Medusa, Kenneth C. Gahan

Theses and Dissertations

A multi-path automatic ground collision avoidance system (Auto-GCAS) for performance limited aircraft was further developed and improved to prevent controlled flight into terrain. This research includes flight test results from the United States Test Pilot School's Test Management Project (TMP) titled Have Multi-Path Escape Decisions Using Sophisticated Algorithms (MEDUSA). Currently, the bomber and mobility air- craft communities lack an Auto-GCAS. The F-16 Auto-GCAS was proven successful for fighter-type aircraft with seven aircraft and eight lives saved from 2014 to 2018. The newly developed and tested Rapidly Selectable Escape Trajectory (RSET) sys- tem included a 5-path implementation which continuously updated at …

Examining The Drivers Of C-130j Maintenance Requirements Through Multiple Regression Analysis, Andrew V. Gill

Theses and Dissertations

As a result of increasing system complexity and cost, new aircraft acquisition, upgrade and repair timelines continue to lengthen. As a result, aircraft are kept in service longer than originally intended. Therefore, age-related wear continues to play a large part in determining mission-capable status, and therefore, aircraft availability (AA) rates. Combined with decreasing fleet sizes and manpower resource pools, each aircraft declared not mission capable (NMC) exerts an out-sized influence upon fleet AA rates. This research used multiple regression analysis to identify and quantify the effects of age, Major Command (MAJCOM) and operating location ambient weather on unscheduled not mission …

The Impacts Of Using Augmented Reality To Support Aircraft Maintenance, Terry R. Hebert Jr.

Theses and Dissertations

The United States Air Force (USAF) expends significant resources to address the rise in aviation mishaps derived from an overworked, understaffed maintenance community, and high operational environment. Currently, paper-based technical orders (T.O.) are utilized by maintainers to accomplish aircraft inspections, servicing, and maintenance tasks. As technology advances, many civilian agencies have begun to leverage augmented reality (AR) to improve organizational proficiency. This research seeks to identify if the inclusion of AR within aircraft maintenance will positively or negatively affect maintenance task accuracy and completion time. A single variable randomized complete block design (RCBD), within-subject design of experiment (DOE) asses the …