Science and Mathematics Education Commons^™

Project Excel: Web-Based Scanning Electron Microscopy For K-12 Education, L. Scott Chumbley, Connie P. Hargrave, Kristen P. Constant, Brian Hand, Thomas Andre, E. Ann Thompson

Constance P. Hargrave

Project ExCEL (Extended Classroom for Enhanced Learning) brings the capabilities of scanning electron microscopy (SEM) into classrooms. University and industry personnel, working together, have developed a web-based interface to allow schools to control a modern SEM. The interface allows a user control of the operating parameters of the microscope, stage movement, and chemical analysis. Such total control is not available on any other system. Since Iowa State University (ISU) pioneered the idea of remote SEM for education, researchers have learned that providing teachers access to sophisticated equipment does not ensure that it will be used. Teachers are busy, and structured …

Project Excel—Web-Based Sem For K–12 Education, L. Scott Chumbley, Kristen P. Constant, Connie P. Hargrave, Tom Andre

Constance P. Hargrave

The goal of Project ExCEL, the Extended Classroom for Enhanced Learning, is to bring the capabilities of Scanning Electron Microscopy (SEM) into elementary and secondary classrooms. We have developed an entirely web-based interface to allow schools to control a modern SEM. The web interface allows a remote user complete control of all the operating parameters of the microscope, including stage movement and x-ray chemical analysis. Such total control currently is not available on any other system. Since pioneering the idea of remote SEM use for K-12 education in the early 1990s, we have learned that merely providing schools and teachers …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

R. Eric Landrum

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Lib 3010 Spring 2018: Students Choose An Image To Represent Patent Searching, Jan Comfort

Jan Comfort

The Engineering Admissions Partnership Program: A Navigation Strategy For Community College Students Seeking A Pathway Into Engineering, Marcia R. Laugerman, Mack C. Shelley, Steven K. Mickelson, Diane T. Rover

Diane Rover

This paper presents the evaluation of a program designed to improve transfer outcomes for community college students pursuing an engineering degree. The program, the Engineering Admissions Partnership Program (E-APP), was designed to improve the navigational success of community college transfer students through connections to the university. These connections include coordinated academic advising, peer-mentoring, campus visits, and online social and professional networks. The objective of the study is to determine the efficacy of the E-APP and its interventions, which will be measured by increased participation rates and increased university retention rates for E-APP participants. Outcome data for the students are analyzed …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Kate Perkins

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Lib 3010 Spring 2017: Students Choose An Image To Represent Patent Searching, Jan Comfort

Jan Comfort

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Amy J. Moll

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Janet M. Callahan

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

Leveraging Students’ Passion And Creativity: Ethos At The University Of Dayton, Margaret Pinnell, Malcolm Daniels, Kevin P. Hallinan, Gretchen Berkemeier

Kevin Hallinan

The Engineers in Technical Humanitarian Opportunities of Service-learning (ETHOS) program was developed in the spring of 2001 by an interdisciplinary group (electrical, chemical, civil and mechanical) of undergraduate engineering students at the University of Dayton (UD). ETHOS was founded on the belief that engineers are more apt and capable to appropriately serve our world if they have an understanding of technology’s global linkage with values, culture, society, politics, and the economy. Since 2001, the ETHOS program at UD has grown and changed. From conceptualization, to implementation, to maturation and national recognition, the program has addressed challenges of academic acceptance, programmatic …

Developing Inquiry-Based Laboratory Exercises For A Mechanical Engineering Curriculum, Sriram Sundararajan, Leann E. Faidley, Terrence R. Meyer

Terrence R Meyer

This paper describes the development of two inquiry-based experiments in a mechanical engineering curriculum at a land grant research-intensive university, aimed at providing students with the opportunity to design and perform experiments. One experiment in engineering measurements (system behavior) and one experiment in fluid dynamics were developed. In each case, students working on teams were posed with a scenario and question to answer. For example, in the system dynamics experiment, students were asked to verify that a thermal system and electrical system were mechanically equivalent systems. In the fluid dynamics experiment, students were asked to investigate drag coefficients for flow …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Daniel Edwards

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Dr Jacob Pearce

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Grassroots Or Returning To One’S Roots? Unpacking The Inception Of A Youth-Focused Community Makerspace, Victor R. Lee, Whitney L. King, Ryan Cain

Victor R Lee

In this paper, we describe the individuals and factors contributing to the emergence of a community makerspace in a small city in the United States. As research into how makerspaces have come into existence is still in a nascent stage, this single case study is intended to describe and highlight some of the complexities involved in creating such a facility. Based on analysis of onsite observations, interviews of adults connected with the space, and electronic communications, we present a story of how two co-founders of a youth-focused makerspace went from having initial interest in extracurricular activities for their own children …

Lib 3010 Spring 2015: Students Choose An Image To Represent Patent Searching, Jan Comfort

Jan Comfort

Lib 3010 Fall 2015: Students Choose An Image To Represent Patent Searching, Jan Comfort

Jan Comfort

Exploring The Factors That Influence And Motivate Female Students To Enroll And Persist In Collegiate Stem Degree Programs: A Mixed Methods Study, Rosemary L. Edzie

Rosemary L Edzie

Nationally, the need for an increase in interest, enrollment, and degrees awarded from science, technology, engineering and mathematics (STEM) degree programs continues to suffer. While students are enrolling in collegiate STEM degree programs, it is not occurring at a rate that meets the workforce demand. In addition to the concern that there is not a sufficient amount of collegiate STEM majors, there is a concern over too few females enrolling and persisting in collegiate STEM degree programs. This mixed methods sequential exploratory research study considered the factors that influence and motivate undergraduate female students to enroll and persist in collegiate …

What Matters In College For Retaining Aspiring Scientists And Engineers From Underrepresented Racial Groups, Mitchell J. Chang, Jessica Sharkness, Sylvia Hurtado, Christopher B. Newman

Christopher B. Newman

This longitudinal study examined factors that contribute to the persistence of underrepresented racial minority (URM) undergraduates in STEM fields. The primary source of data came from the Cooperative Institutional Research Program’s 2004 The Freshman Survey (TFS) and 2008 College Senior Survey (CSS). The sample included 3,670 students at 217 institutions who indicated on the TFS that they intended to major in a STEM field, 1,634 of whom were underrepresented minority (URM) students. Findings indicate that Black and Latino undergraduates were significantly less likely to persist in STEM majors than were their White and Asian American counterparts. Background characteristics and college …

An Interactive Exploration Of Gender And Engineering: Unpacking The Experience, Debbie Chachra, Lynn Stein, Alisha Sarang-Sieminski, Caitrin Lynch, Yevgeniya Zastavker

Alisha L. Sarang-Sieminski

The engineering student experience is understood to differ for male and female students; gendered interactions affect the development of academic and professional role confidence, as well as engineering identity. The purpose of this session is twofold. First, we aim to introduce participants to concepts of gender schemas, privilege, and identity using a range of interactive activities, including brainstorming and structured discussion. Second, we intend to share information about and obtain feedback on a Gender Discussion Exploration Kit, which the participants will be encouraged to review, use, and share at their home institutions.

Exploring The Factors That Motivate Female Students To Enroll And Persist In A Collegiate Stem Degree Program, Rosemary L. Edzie, Moe Alahmad

Rosemary L Edzie

In the United States, collegiate enrollment in science and engineering programs continues to decline, while European and Asian universities have increased the number of science and engineering graduates. In addition, there is a growing concern over too few females enrolling and persisting in collegiate science, technology, engineering, and mathematics (STEM) degree programs. Through increasing access to pre-collegiate STEM activities, providing a better understanding of STEM career choices, instilling of confidence in math and science, and establishing student and industry based mentoring programs, more female students will enroll and persist in collegiate STEM degree programs. This paper sets to explore the …

An Interactive Exploration Of Gender And Engineering: Unpacking The Experience, Debbie Chachra, Lynn Stein, Alisha Sarang-Sieminski, Caitrin Lynch, Yevgeniya Zastavker

Debbie Chachra

The engineering student experience is understood to differ for male and female students; gendered interactions affect the development of academic and professional role confidence, as well as engineering identity. The purpose of this session is twofold. First, we aim to introduce participants to concepts of gender schemas, privilege, and identity using a range of interactive activities, including brainstorming and structured discussion. Second, we intend to share information about and obtain feedback on a Gender Discussion Exploration Kit, which the participants will be encouraged to review, use, and share at their home institutions.

Student Self-Efficacy In Introductory Project-Based Learning Courses, Geoffrey Pleiss, Madeline Perry, Yevgeniya Zastavker

Yevgeniya V. Zastavker

The purpose of this study is to determine how introductory Project-Based Learning (PjBL) courses affect the self-efficacy of first-year engineering students. Grounded theory is used to analyze twelve interviews with first-year students about their experiences in two PjBL courses, Engineering Design and Physics Laboratory. Data indicate that students' self-efficacy within each course is correlated with the extent to which their course goal perceptions align with those intended by faculty. In Engineering Design, students' recognition of the faculty's intended course goals corresponds to higher levels of self-efficacy. Conversely, in Physics Laboratory, students' low self-efficacy is correlated with a large gap between …

An Interactive Exploration Of Gender And Engineering: Unpacking The Experience, Debbie Chachra, Lynn Stein, Alisha Sarang-Sieminski, Caitrin Lynch, Yevgeniya Zastavker

Caitrin Lynch

The engineering student experience is understood to differ for male and female students; gendered interactions affect the development of academic and professional role confidence, as well as engineering identity. The purpose of this session is twofold. First, we aim to introduce participants to concepts of gender schemas, privilege, and identity using a range of interactive activities, including brainstorming and structured discussion. Second, we intend to share information about and obtain feedback on a Gender Discussion Exploration Kit, which the participants will be encouraged to review, use, and share at their home institutions.

An Interactive Exploration Of Gender And Engineering: Unpacking The Experience, Debbie Chachra, Lynn Stein, Alisha Sarang-Sieminski, Caitrin Lynch, Yevgeniya Zastavker

Yevgeniya V. Zastavker

The engineering student experience is understood to differ for male and female students; gendered interactions affect the development of academic and professional role confidence, as well as engineering identity. The purpose of this session is twofold. First, we aim to introduce participants to concepts of gender schemas, privilege, and identity using a range of interactive activities, including brainstorming and structured discussion. Second, we intend to share information about and obtain feedback on a Gender Discussion Exploration Kit, which the participants will be encouraged to review, use, and share at their home institutions.

An Interactive Exploration Of Gender And Engineering: Unpacking The Experience, Debbie Chachra, Lynn Stein, Alisha Sarang-Sieminski, Caitrin Lynch, Yevgeniya Zastavker

Lynn Andrea Stein

The engineering student experience is understood to differ for male and female students; gendered interactions affect the development of academic and professional role confidence, as well as engineering identity. The purpose of this session is twofold. First, we aim to introduce participants to concepts of gender schemas, privilege, and identity using a range of interactive activities, including brainstorming and structured discussion. Second, we intend to share information about and obtain feedback on a Gender Discussion Exploration Kit, which the participants will be encouraged to review, use, and share at their home institutions.

Finding What Women Want: Developing Strategies To Increase Recruitment And Retention In Along With Attracting External And Internal Sources Of Funding, Shweta Chopra, Gary R. Bertoline, Chad M. Laux

Shweta Chopra

Numerous reports have discussed the dearth of women in Science, Technology, Engineering; Mathematics (STEM) fields. Almost two-thirds of young children of age group 9-15 state that they enjoy science, but girls’ attitudes and interests change by middle school. During high school, girls and boys take the same number of science courses. In addition, girls perform as well as boys in those courses. Despite comparable performance levels, girls rarely continue studying science at college level. Lack of female progress in STEM education has been observed in STEM fields despite multiple measures taken by universities, colleges, schools, industries, and other organizations dedicated …

Enhancing Precalculus Curricula With E-Learning: Implementation And Assessment, Janet Callahan, Seung Youn Chyung, Joanna Guild, William Clement, Joe Guarino, Doug Bullock, Cheryl Schrader

Janet M. Callahan

During Fall semester of 2007, a semester-long, quasi-experimental study was conducted at Boise State University to investigate the effectiveness of a systematically sequenced and managed, self-paced e-learning activity on improving students’ academic performance and motivation. A total of 125 students enrolled in 3 different sections of a Precalculus class participated in the study. The e-learning activity was implemented in 2 of the 3 sections as a required homework assignment. Students enrolled in one of the 2 selected sections were all engineering majors. The 3^rd section was a control group that did not use the e-learning activity. A pre-test, measuring …

Introducing Nonlinear Problems To Undergraduate Engineering Students, Mulukutla S. Sarma, Karl E. Lonngren

Sarma Mulukutla

It is argued that preparing good engineers to the present day challenging industry should involve the extension of homework problems to include realistic complications of nonlinearity and extensive use of the available computing facilities. This point of view has been illustrated through a simple Faraday's law problem of an electromechanical system that exhibits nonlinear effects if the resistance of the rails is taken into account. The procedure that is employed in this paper to solve the nonlinear equation is simple enough to be introduced at an undergraduate level for the engineering students

Enhancing Student Learning Experience In Lean Manufacturing With Industry Engagement, Chad M. Laux, Shweta Chopra

Shweta Chopra

Engagement with industry professionals is important to meeting Engineering Technology curriculum goals. Bringing industry representatives (guest speakers) to engage in the classroom, involving students with professional chapters involved in Lean, student field trips and incorporation of a virtual plant tour is based upon a classroom model that incorporates industry advisory board feedback. The model for teaching an introduction to lean manufacturing course introduces students to lean thinking ideas in addition to introducing students to industry professionals as well. This provides students with an opportunity to bridge the gap between classroom education and real world experience. In this paper we are …

Lib 3010 Spring 2012: Students Choose An Image To Represent Patent Searching, Jan Comfort

Jan Comfort