Science and Mathematics Education Commons^™

Imagination To Innovation: Design Thinking For Young Learners, Lindsey Herlehy, Cassandra Armstrong

Publications & Research

Design thinking is the intersection of engineering design and social-emotional learning. Today’s learners must be empathetic problem solvers capable of defining problems and designing appropriate solutions to meet the needs of the user. In this session, participants will experience design thinking through literature-based scenarios appropriate for early learners. They will analyze and compare their own models to those of others and compose a lesson that will engage students in the design thinking process.

Enhancing Student Veterans' Self-Efficacy And Sense Of Belonging In A Targeted Learning Community: Four Years Of Qualitative Results, Anthony W. Dean, Cynthia Tomovic, Vukica Jovanovic, Kim E. Bullington

Engineering Technology Faculty Publications

Eight semesters of qualitative data, collected over four academic years, are presented from a project that resulted in the development of a student professional learning community of high-achieving, low-income engineering and engineering technology student veterans. In the context of this project, student veterans received academic, professional, and financial support that helped them to be successful in school and to prepare them for a career in the STEM workforce. As adult learners, students in this learning community were a vital part of the curriculum development which resulted in increasing the students’ interest and buy-in. Typically, adult learners have lower levels of …

Spring 2022 Saturday Seminars Agenda, Shubha Tewari

Science and Engineering Saturday Seminars

No abstract provided.

Rural Stem Teachers: An Oasis In The Desert, Ryan G. Zonnefeld, Valorie L. Zonnefeld

Faculty Work Comprehensive List

Teacher preparation programs for STEM education should prepare teachers for all settings, including rural schools. Students across geographic locales show equal interest in STEM fields, but rural students often lack access to highly qualified STEM teachers. UNESCO (2014) notes that the disparity in education between rural and urban schools is a concern of many countries. In the United States, the National Center for Educational Statistics confirms that twenty percent of students are educated in rural schools and the STEM teachers in these schools are often the only STEM expert. These teachers become backbone teachers that set the foundation and direction …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Building A Functional Cardiograph Over Four Semesters, Part 3: Estimating Heart Rate And Respiration Rate In The Time And Frequency Domains Using Matlab, Gail Baura, Francisca Fils-Aime, Vincent Chiun-Fan Chen, Leanne Kallemeyn

Engineering Science Faculty Publications

At Loyola University Chicago (LUC), all engineering courses are taught using a mandatory minimal lecture style, where the majority of course meeting time is devoted to group activities. Each activity may take place during that course meeting only, over the entire semester, or over multiple semesters. Curricular contextual threads take place over multiple semesters. One such contextual thread is the cardiograph project, whereby students build a functional cardiograph that estimates heart rate (HR) and respiration rate (RR) over four semesters (first, third, fifth, and sixth semesters). In Part III, students acquire their own electrocardiogram (ECG) using a custom motherboard, with …

Developing An Inquiry-Based Laboratory Project For Chem 142l Course At Bsu, Manuel Pina

Honors Program Theses and Projects

In addition to content knowledge, critical and independent thinking, scientific reasoning, and problem-solving skills are essential in preparing next generation of successful workforce. Since one of the biggest advantages of STEM disciplines is a “must-have” hands-on laboratory experience, it is intuitive to exploit this learning space to reinforce afore-mentioned skills. In this context, project-based (PBL) or inquiry-based (IBL) laboratory experiences are rapidly becoming mainstream pedagogical choice for many STEM instructors across United States.^[1-4] PBL, and IBL are learning experiences that offer students an opportunity to experience realistic scientific process of discovery through carefully designed inquiry-driven and/or open-ended investigative laboratory …

Stem Education In The Early Childhood Classroom, Julia Biagiotti

Honors Program Theses and Projects

This qualitative study focuses on the type of STEM education students are getting at the early childhood level (PK-2). Based on gaps found in literature, an interview protocol was created and six participants with various careers in the field of STEM education were interviewed. The research was concentrated on trying to determine what components of STEM education make it successful in the early childhood classroom. All of the interview responses were analyzed and coded and determined the results found below. A few integral parts of a successful STEM education seem to be curiosity, asking questions and a hands-on component, but …

Early Engineering Experience (E3) Initiative, Danielle Nicole Carter, Rafael E. Landaeta

Engineering Management & Systems Engineering Faculty Publications

This Work in Progress paper details an initiative designed to broaden exposure and attract increased interest in the study of engineering of a minority-serving institution (MSI) with a plurality of races represented. The University's student population where this initiative is being implemented consists of 26.2% African American and 6% that identify with two or more races. In contrast, the College of Engineering in this University is 20% African American; the freshmen class makes up 6.3% of this figure. By USDOE standards, this characterization is indicative of a predominantly white institution (PWI). According to the Bureau of Labor Statics, underrepresented minorities …

Stem Opportunities - High School 2019, Huey-Xian Kelly Wong, Madeleine Rauhauser, Annie Morgan Nelson

Honors Expanded Learning Clubs

This publication details the lesson plan for the “Opportunities in STEM” club for the summer of 2019. This club began out of a desire to educate high school students about the opportunities and careers available in the science, technology, engineering, and mathematics fields. Often, students feel that the prospect of entering a STEM field is daunting and out of their grasp. What it means to be a scientist is often unclear, and students never consider opportunities out of the fear of the unknown, particularly when science is associated with complexity and difficulty. This lesson plan integrates experiments with a wealth …

Law School News: Roger Williams University Announces 11th President 02-13-2019, Ed Fitzpatrick

Life of the Law School (1993- )

No abstract provided.

Modeling For Ecological Engineering, Lauren Simpson, Brooke A. Whitworth

Publications

In this classroom, high-school biology students learned how pine beetle outbreaks in North America have become some of the worst in a decade. To make sense of this phenomenon, students created iterative models with in-depth explanations over the course of the unit. These models were formative in developing students’ conceptual understanding of ecology and applying their knowledge to a real-world context. The models showed students the detrimental effects of the outbreaks and helped them wonder about efforts to manage them and preserve the forests. This allowed the teacher to connect their learning to an ecological engineering task. This task pushed …

Board 57: Identifying And Disseminating Transformative Professional Development Of Stem Undergraduates Who Perform Outreach: Progress In Year 1, Michael Alley, Joanna K. Garner

Center for Educational Partnerships Publications

To teach STEM content to K-12 students and to recruit talented and diverse K-12 students into STEM, many outreach programs at universities in the United States rely on STEM undergraduates. While the design of such outreach typically focuses on the K-12 students who are taught or recruited, an important but often overlooked consideration is the effect of the outreach on the professional development of the STEM undergraduates themselves. This proposed EAGER project seeks to determine which outreach programs in the United States provided the most transformative professional development of the participating STEM undergraduates. This project then seeks to capture the …

Board 57: Identifying And Disseminating Transformative Professional Development Of Stem Undergraduates Who Perform Outreach: Progress In Year 1, Michael Alley, Joanna K. Garner

Office of Research Faculty & Staff Publications

To teach STEM content to K-12 students and to recruit talented and diverse K-12 students into STEM, many outreach programs at universities in the United States rely on STEM undergraduates. While the design of such outreach typically focuses on the K-12 students who are taught or recruited, an important but often overlooked consideration is the effect of the outreach on the professional development of the STEM undergraduates themselves. This proposed EAGER project seeks to determine which outreach programs in the United States provided the most transformative professional development of the participating STEM undergraduates. This project then seeks to capture the …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …

The Future Is Now Science Club, Shane Stan

Honors Expanded Learning Clubs

The Future is Now! What will our planet look like in 10, 20, 50, or even 100 years? Where will we live, what will we eat, how will we travel? Believe it or not, in the coming decades, many ideas that were once science fiction will come through to realization. With this, many of the discoveries and technologies making all of this happen are being developed right now as we go about our daily lives.

In this club, appropriately titled, The Future Is Now Science Club, students will be inspired to think larger about the present world they live in. …

Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy Long Iii, Trevion S. Henderson, Michael Steven Williams Dr,

Publications

Diverse people and perspectives are needed to spur innovation and tackle societal problems. A wealth of untapped intellectual and economic potential exists among historically underrepresented racial/ethnic groups – including Blacks and Latinos – who have not had equitable access to engineering and related STEM fields. For Blacks and Latinos who are accepted into engineering and related STEM fields, they face a number of barriers to their success which lead to low retention and graduation rates. In historically male-dominated fields such as engineering and related STEM disciplines, Black and Latino men have remained underrepresented at the student and faculty ranks. To …

Infographic: Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy L. Long Iii, William Wanyagah

Publications

Infographic was created to support the article Institutional Barriers to Black and Latino Male Collegian's Success in Engineering and Related Stem Fields, which can be read here:

Impacts Of Effective Temperature On Sectional View Drawing Ability And Implications For Engineering And Technology Education Students, Petros J. Katsioloudis

STEMPS Faculty Publications

Temperature can influence thermal comfort, working performance, and social behavior. In a classroom that is slightly cool, an assumption can be made that learning could be affected in a negative way. Considering this, a quasi-experimental study was done to determine if a significant difference of effective temperature have an effect on students’: a) spatial visualization ability, as measured by the MCT and b) ability to sketch a sectional view drawing. While not statistically significant, the students who received treatment using warm water outperformed their peers who received treatment using cold and hot water temperatures, respectively.

Internet Of Things, John Ritz, Zane Knaack

STEMPS Faculty Publications

The internet has not only made information searching and instantaneous communications possible, it has also expanded the development of smart products that can be connected and controlled over the internet. Automobile manufacturers have used these devices during the past decade to make cars safer and assist drivers with updated information on vehicle operation. Today many more products can be operated and controlled from a smartphone or computer. Depending on your level of desired internet-connectedness, many home products are coming to the market with IoT connectivity. Much data is being collected and acted upon through databases. These developments should enable machines …

Toys Redesigned: The Intersection Of Industrial Technology And Service-Learning Principles, Jill Stefaniak, Petros Katsioloudis, Basim Matrood

STEMPS Faculty Publications

To provide students with a situated learning experience that encouraged them to develop creative design solutions, the authors created a service-learning activity that required industrial technology students to apply design principles and procedures to design and develop toys to be given to pediatric patients at a local children's hospital. The following are excerpts from student reflections addressing the technological skills used and key takeaways from the project: * "I was able to use my mechanical skills in this project by knowing how to operate the drill press and by cutting all the pieces that were needed and assembling them." * …

Office Of Stem Education Annual Report 2015-2016, Uno Office Of Stem Education

Student Learning

During 2015-2016 the Office of STEM (OSTEM) Education at UNO has continued to move aggressively forward in undertaking and leading STEM Learning projects, many of which collaborate closely with several other UNO colleges and other formal and informal educational institutions. Also continuing into 2016, OSTEM is steadily transitioning to becoming more of a focused departmental organization, while the UNO STEM Leadership Team takes over more of the campus-wide STEM Priority efforts.

This report describes the TED STEM successes, ongoing efforts and challenges this last year with a direct focus on the TED and COE context, and only lightly touches on …

Stem Community Chairs Progress Updates Spring 2016, Uno Stem Leadership Team

Student Learning

The following is a brief update of the activities and efforts being undertaken by UNO’s Dr. George and Sally Haddix Community Chair of STEM Education as being held by Dr. Neal Grandgenett. The goal of this position is:

Position Goal: To organize, lead and inspire collaborative STEM initiatives at UNO, that cross colleges and disciplines, and that aggressively position UNO to be a true national leader in interdisciplinary STEM programs. (Curriculum, Capacity, Collaboration)

Designing And Implementing A Planetary Geology Course For Engineers At The Jet Propulsion Lab, Jessica Joyce Dimizio

STAR Program Research Presentations

This project took place at NASA’s Jet Propulsion Laboratory (JPL) and involved creating an instructional tool that would increase the quality of communication between mechanical engineers and geologists who are collaboratively designing ways to collect and cache martian rock samples for the Mars 2020 rover mission. Geology and engineering do not cross paths in traditional education settings and communication is difficult due to the specialized language and processes of geology. Previous attempts to bridge communications between these two groups did not serve a large enough audience nor were they specific to the complexities of the Mars 2020 mission. Interviews with …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Higher education research

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

Uno Stem Annual Report 2015, Uno Stem Leadership Team

Student Learning

The following document is a brief Annual Report for the STEM Priority at UNO as of May 1, 2015. The document builds upon past strategic planning discussions, meetings,and conversations and aligns with the UNO STEM Strategic Plan, as first published in the Fall of 2013. It is important to note that the annual report is essentially a“work in progress” and will be continually refined during the next year and updated as initiatives progress. It is also a “springboard” for a continued and strategic review of our local STEM statistics and the professional literature on STEM learning, and it serves as …

Engineering Education For High-Ability Students, Branson Lawrence, Diane Hinterlong, Laurie S. Sutherland

Publications & Research

Over the course of their careers, engineers command a breadth and depth of knowledge from science, mathematics, society, politics, and economics that is needed for continuously updating their knowledge of the latest discoveries and advances. Driven by curiosity and enabled by rapid information technology, engineers are kept abreast of the latest advancements almost instantaneously. Today’s scientific knowledge is fluid and complex, yet these traits of engineering remain constant: the ability to define structure, plan, repeatedly evaluate, and align results to the initial objective. Engineering teachers need to facilitate their students’ ability to access information effectively and to apply it appropriately, …

Fearless Friday: Kirsten Crear, Kirsten Crear

SURGE

Even in her last semester here at Gettysburg, Kirsten Crear ’14 is fearlessly working to make changes for the future of the campus community. This semester, Kirsten introduced a STEMinists club on campus that will give female students who are STEM (an acronym for Science-Technology-Engineering-Mathematics) majors the opportunity to come together and create a community, share and discuss the difficulties they face as women in their fields of study, and support and mentor each other as they prepare to enter their fields.

Kirsten is passionate, driven, and determined, taking the initiative to bring this group of women together on campus …

An Engineering Journey: A Transcendental Phenomenological Study Of African-American Engineers' Persistence, Kristy Somerville-Midgette

Doctoral Dissertations and Projects

This transcendental phenomenological research study examined the perspectives and lived experiences of African-American female engineers related to the factors that led to their persistence to enter, persist through, and remain in the field. The study was guided by four research questions: (a) How do K-12 experiences shape African-American female engineers' decisions to enter the STEM field? (b) What persistence factors motivated African-American female engineers to enter the engineering profession? (c) What are the factors that shape African-American female engineers' persistence to progress through postsecondary engineering programs? (d) How do professional experiences shape African-American female engineers' persistence in the field? Cognitive …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.