Science and Mathematics Education Commons^™

A Longitudinal Analysis Of Pathways To Computing Careers: Defining Broadening Participation In Computing (Bpc) Success With A Rearview Lens, Mercy Jaiyeola

Theses and Dissertations

Efforts to increase the participation of groups historically underrepresented in computing studies, and in the computing workforce, are well documented. It is a national effort with funding from a variety of sources being allocated to research in broadening participation in computing (BPC). Many of the BPC efforts are funded by the National Science Foundation (NSF) but as existing literature shows, the growth in representation of traditionally underrepresented minorities and women is not commensurate to the efforts and resources that have been directed toward this aim.

Instead of attempting to tackle the barriers to increasing representation, this dissertation research tackles the …

Insights From Two Decades Of P-12 Engineering Education Research, Cary I. Sneider, Mihir K. Ravel

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has seen a growing movement in the United States towards the adoption of engineering and technology as a complement to science education. Motivated by this shift, this article offers insights into engineering education for grades P-12, based on a landscape review of 263 empirical research studies spanning the two decades from January 2000 to June 2021. These insights are organized around three core themes: (1) students’ understandings, skills, and attitudes about engineering and technology; (2) effective methods of P-12 engineering education; and (3) benefits of P-12 engineering education. The insights are captured in the form of evidence-based …

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Build Your Own Body Mod: Empowerment Through Prototyping And Design, Anaiss Arreola, Katherine R. Ganim

Journal of Science Education for Students with Disabilities

When you don’t have a hand, what could you have instead? This article introduces the impact of inviting youth with disabilities to learn tools and technology to design their own solutions and advocate for their own future. This approach to programming is rooted in a mindset of designing WITH, not FOR. Not only are design outcomes improved when users are incorporated into the process, but this approach has been shown to improve confidence in creating one’s own solutions. These programs include hands-on “design-your-own-body-mod” workshops, as well as a budding inclusive design consultancy led by youth with disabilities. Through this programming, …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Mechanism Design And Analysis: Developing An Understanding Of Mechanism Motion Through Graphical Modeling, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide Technology and Engineering Educators with foundational knowledge of mechanism design and analysis and the ability to develop middle and high school students' mechanism knowledge during practical hands-on learning activities in the STEM classroom. Technology and Engineering Educators' implementation of mechanism design and analysis could promote students' increased depth of mechanical knowledge and ability to apply this knowledge during engineering design challenges. In this article, the authors present an introduction to four-bar mechanism design and analysis using CAD software to produce graphical representations. After designing mechanisms graphical, students should be allowed to produce …

Building A Functional Cardiograph Over Four Semesters, Part 3: Estimating Heart Rate And Respiration Rate In The Time And Frequency Domains Using Matlab, Gail Baura, Francisca Fils-Aime, Vincent Chiun-Fan Chen, Leanne Kallemeyn

Engineering Science Faculty Publications

At Loyola University Chicago (LUC), all engineering courses are taught using a mandatory minimal lecture style, where the majority of course meeting time is devoted to group activities. Each activity may take place during that course meeting only, over the entire semester, or over multiple semesters. Curricular contextual threads take place over multiple semesters. One such contextual thread is the cardiograph project, whereby students build a functional cardiograph that estimates heart rate (HR) and respiration rate (RR) over four semesters (first, third, fifth, and sixth semesters). In Part III, students acquire their own electrocardiogram (ECG) using a custom motherboard, with …

4-H Engineering Design Challenge Program: Engaging Youth In Stem Learning, R.Michael Compton, Rebecca L. Meyer, Anne Stevenson, Somongkol Teng

The Journal of Extension

The University of Minnesota 4-H Engineering Design Challenge program is an experiential learning opportunity in which youth work with adult volunteers to create Rube Goldberg influenced machines to address real-world issues. The program components are designed to help youth develop STEM work skills using an Engineering Design Process, increase interest in STEM content knowledge, and explore STEM career interests/aspirations. Evaluation indicates a majority of participants learn the engineering design process, principles of mechanical engineering, teamwork, public speaking, and problem solving. Programmatic outcomes and supports provide for the successful replication, adaptation, and implementation in both formal and non-formal learning environments.

Making Makers: Tracing Stem Identity In Rural Communities, Jessie Nixon, Andy Stoiber, Erica Halverson, Michael Dando

Journal of Pre-College Engineering Education Research (J-PEER)

In this article, we describe efforts to reduce barriers of entry to pre-college engineering in a rural community by training local teens to become maker-mentors and staff a mobile makerspace in their community. We bring a communities of practice frame to our inquiry, focusing on inbound and peripheral learning and identity trajectories as a mechanism for representing the maker-mentor experience. Through a longitudinal case study, we traced the individual trajectories of five maker-mentors over two years. We found a collection of interrelated factors present in those students who maintained inbound trajectories and those who remained on the periphery. Our research …

Funds Of Knowledge As Pre-College Experiences That Promote Minoritized Students’ Interest, Self-Efficacy Beliefs, And Choice Of Majoring In Engineering, Dina Verdín, Jessica M. Smith, Juan Lucena

Journal of Pre-College Engineering Education Research (J-PEER)

Pre-college experiences both inside and outside of the classroom inform students’ interest in science, technology, engineering, and mathematics (STEM)-related activities, help them evaluate their knowledge and skills in various tasks, and shape their perceptions of themselves as individuals who can participate in STEM. Yet little empirical research examines the valuable pre-college knowledge, practices, and skills that minoritized students acquire through their home experiences and how they can support students’ transition into an engineering pathway. This study addresses this gap by investigating how students’ funds of knowledge support their interest in engineering, self-efficacy beliefs, and certainty of pursuing an engineering major. …

Real-Life Conundrums In The Struggle For Institutional Transformation, Julia Mcquillan, Nestor Hernandez

Department of Sociology: Faculty Publications

Intersecting systems of inequality (i.e., gender and race/ethnicity) are remarkably resistant to change. Many universities, however, seek National Science Foundation Institutional Transformation awards to change processes, procedures, and cultures to make science, technology, engineering, and mathematics (STEM) departments more inclusive. In this article we describe a case study with observations for eight years of before (2000–2007), five during (2008–2013), and seven after (2014–2020) intensive efforts to increase women through reducing barriers and increasing access to women. Finally, we reflect on flawed assumptions built into the proposal, the slow and uneven change in the proportion of women over time, the strengths …

Hands-On 3d Printed Dynamics Activities, Dakota Baker, Jacob Lindberg, Andrew Meyenberg, Junnior Rodriguez

Mechanical Engineering

The advancement of 3D printing has allowed everyday individuals to rapid prototype and manufacture in a more efficient, cost-effective, and timely manner. This has paved the way for a more adaptable educational model, by allowing instructors to easily access alternative instruments for teaching. By providing students with tangible tools, they will better be able to grasp complex principles. Dynamics professors need a way in which they can easily access these academic tools, transport them to and from class, and teach multiple dynamics principles through variations of a single 3D printed kit. Interviews with professors and students were conducted to gain …

The Ingenuity Of Everyday Practice: A Framework For Justice-Centered Identity Work In Engineering In The Middle Grades, Angela M. Calabrese Barton, Kathleen Schenkel, Edna Tan

Journal of Pre-College Engineering Education Research (J-PEER)

Inequities in opportunities to learn and become in engineering, especially for minoritized youth, are enduring and systemic. How students experience engineering education, through curriculum, pedagogy, and teacher/student interactions, all shape opportunities for identity development. In this paper we draw upon cultural studies and critical ethnography to explore how and why students engage in engineering for sustainable communities and its relationship to their identity work. We ground our work in a justice-centered asset-based stance that centers how people’s lived lives and community wisdom yield powerful forms of cultural knowledge/practice relevant to learning and engaging in science, technology, engineering, and mathematics. We …

Stem Education In The Early Childhood Classroom, Julia Biagiotti

Honors Program Theses and Projects

This qualitative study focuses on the type of STEM education students are getting at the early childhood level (PK-2). Based on gaps found in literature, an interview protocol was created and six participants with various careers in the field of STEM education were interviewed. The research was concentrated on trying to determine what components of STEM education make it successful in the early childhood classroom. All of the interview responses were analyzed and coded and determined the results found below. A few integral parts of a successful STEM education seem to be curiosity, asking questions and a hands-on component, but …

What’S The Buzz? A Hands-On, Interdisciplinary, And Fun Way To Learn About Circuits, Energy, Engineering, Bee Communication, And Pollination, Christine L. Moskalik

Publications & Research

How can a simple toothbrush- bot be used to model honey bee communication as well as the role of such communication in pollination? Learners explore basic circuitry through the popular tooth- brush-bot activity, with a spin.

Contributing To Engineering Colleges Students' Development Through Out-Of-Class Involvement: A Survey Of Chinese Private Colleges' Engineering Students, Wanlu Li

Education (PhD) Dissertations

The purpose of this study was to investigate the primary characteristics of engineering college students’ involvement in out-of-class activities (OA) at one private college in China through the use of the translated and culturally adapted Chinese version of the Postsecondary Student Engagement Survey (PosSES 2.1). This study provides the statistical analyses of the survey data completed by 283 senior engineering students on their perceptions about their levels of involvement related to positive/negative outcomes students perceive and affective engagement. Data results showed all levels of involvement have a significant influence on positive outcomes. Besides, active involvement degree, hours, and types of …

What’S The Buzz?, Christine L. Moskalik

Teacher Resources

Read more: Moskalik, C. (2021). What’s the Buzz? A hands-on, interdisciplinary, & FUN way to learn about circuits, energy, engineering, bee communication and pollination. Science and Children. National Science Teaching Association. Volume 58 (Issue 5). May/June 2021.

Unsupervised Data Mining Technique For Clustering Library In Indonesia, Robbi Rahim, Joseph Teguh Santoso, Sri Jumini, Gita Widi Bhawika, Daniel Susilo, Danny Wibowo

Library Philosophy and Practice (e-journal)

Organizing school libraries not only keeps library materials, but helps students and teachers in completing tasks in the teaching process so that national development goals are in order to improve community welfare by producing quality and competitive human resources. The purpose of this study is to analyze the Unsupervised Learning technique in conducting cluster mapping of the number of libraries at education levels in Indonesia. The data source was obtained from the Ministry of Education and Culture which was processed by the Central Statistics Agency (abbreviated as BPS) with url: bps.go.id/. The data consisted of 34 records where the attribute …

Scaffolding Middle And High School Students’ Engineering Design Experiences: Quality Problem-Scopeing Promoting Successful Solutions, Andrew Hughes, Cameron Denson

Educational Leadership & Technology Faculty Publications

Highly proficient expert engineers begin the iterative process of design by thoroughly investigating the design problem. Engineering students are often distracted by surface details, leading to a faulty conception of the problem and inappropriate solution strategies. Adequate problem-scoping is arguably the most important step in the design process. To address this issue, the researchers developed an instructional framework to help teachers scaffold students’ cognitive and metacognitive processes during the problem-scoping phase of a design challenge. The purpose of this quasi-experimental study was to investigate the impact that scaffolded instruction related to the SCOPE process had on students’ solution success during …

Bridging Education And Engineering Students Through A Wind Energy-Focused Community Engagement Project, Maija A. Benitz, Li-Ling Yang

Engineering, Computing & Construction Management Faculty Publications

Regional growth in offshore wind energy development, changes to the state’s K-12 science standards, and a desire to deepen undergraduate student learning coalesced to inspire an interdisciplinary community engagement project bridging university courses in engineering and education. The project consists of three main activities: a professional development event for local fourth grade teachers, five classroom lessons designed and taught by undergraduate engineering and education majors, and a final celebration event, all focused around the topics of wind energy and engineering design. This spring, the project was carried out for the third consecutive year, though each year’s implementation has been unique …

Designing An Integrated Stem Semester For Pre-Service Elementary Teachers, Amanda Thomas, Matt Flores, Michael Hart, Elizabeth Hasseler, Tammera Mittelstet, Danae Peterson, Amy Sokoll Bauer

Department of Teaching, Learning, and Teacher Education: Faculty Publications

Teacher educators in an undergraduate elementary teacher certification program at a large university in the United States redesigned the traditional program to integrate STEM learning across multiple courses. During this Integrated STEM Semester, typically taken during the fifth semester of the undergraduate program, pre-service teachers (PSTs) enroll in mathematics content, mathematics methods, science methods, instructional technology, and practicum courses.

Mentoring Prospective Engineering Students Through The After School Program "Girls In Engineering" Focused On Building An Underwater Remotely Operated Vehicle, Vukica M. Jovanović, Deborah Marshall, Jeff Warren Larson Jr., Abdul Rahman Badawi, Neil R. Stclair, Otilia Popescu, Murat Kuzlu, Petros J. Katsioloudis, Linda Vahala, Michael Anthony Crespo

Engineering Technology Faculty Publications

A number of studies by engineering education researchers have pointed out that all-female teams, rather than mixed teams, result in better forms of participation and interaction in engineering related after-school programs and clubs. In particular, for after-school programs or clubs that form in response to a STEM competition, all-female teams have better chances of developing. One such competition, which will be discussed in this paper, is a regional Marine Advanced Technology Education (MATE) competition in which students from Blind_Review High School have been participating for many years.For each year’s competition, an all-female team of students enrolled in the Career and …

Test 2242a: New Holland T8 435 Ultra Command, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2242: Case Ih Magnum 400, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2238: John Deere 7r 350 Ivt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1150a Fendt 1050, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2084a: John Deere 7r 270, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2085a: John Deere 7r 250, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2090a: John Deere 7r 230, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2179a: John Deere 7r 210, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …