Education Commons^™

Impact Of Critical Narrative On Students’ Abilities To Recognize Ethical Dilemmas In Engineering Work, Jeff Brown, Chad Rohrbacher, Taylor J. Mitchell, Dr. Leroy Long Iii, Jenna Korentsides, Joseph R. Keebler

Publications

This study aims to investigate the impact of exposure to critical narratives on students' abilities to recognize ethical dilemmas and broader impacts in engineering work. Critical narratives are place-based stories that engage students and help them enhance their critical thinking skills by making connections between the narratives, broader impacts of engineering work, and their responsibility to address these issues. The effectiveness of the critical narrative intervention was assessed by implementing discussion-based assignments around three critical narratives, which required students to listen to the narrative, respond to focus questions, engage with their peers, and reflect on the process. The intervention was …

The Impact Of A Multidisciplinary Service-Learning Project On Engineering Knowledge And Professional Skills In Engineering In Engineering And Education Students, Stacie I. Ringleb, Pilar Pazos, Francisco Cima, Isaac Koduah Kumi, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

A multidisciplinary service-learning project that involved teaching engineering to fourth and fifth graders was implemented in three sets of engineering and education classes to determine if there was an impact on engineering knowledge and teamwork skills in both the engineering and education students as well as persistence in the engineering students. Collaboration 1 paired a 100-level engineering Information Literacy class in Mechanical and Aerospace Engineering with a 300-level Educational Foundation class. Collaboration 2 combined a 300-level Electromechanical Systems class in Mechanical Engineering with a 400-level Educational Technology class. Collaboration 3 paired a 300-level Fluid Mechanics class in Mechanical Engineering Technology …

Development Of A Data Science Curriculum For An Engineering Technology Program, Salih Sarp, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic, Zafer Acar

Engineering Technology Faculty Publications

Data science has gained the attention of various industries, educators, parents, and students thinking about their future careers. Statistics departments have traditionally offered data science courses for a long time. The main objective of these courses is to examine the fundamental concepts and theories. However, teaching data science courses has also expanded to other disciplines due to the vast amount of data being collected by numerous modern applications. Also, someone needs to learn how to collect and process data, especially from industrial devices, because of the recent development of Internet of Things (IoT) technologies. Hence, integrating data science into the …

Working Full Time And Earning An Engineering Degree: Wellbeing In A Co-Op-Based Engineering Program, Catherine Mcgough Spence, Luke Nyberg, Justine Chasmar, Jodi Nelson, Marissa Tsugawa

Integrated Engineering Department Publications

The purpose of this research paper is to describe how stress manifests in undergraduate engineering students who are working in paid engineering positions while completing their upper-division coursework, through the analysis of reflective prompts on wellbeing, and engineering belongingness. Previous research has identified the culture of “suffering and shared hardship” where heavy workloads and stressful situations are expected in engineering programs and engineering as a discipline. Stress, specifically feelings of being overwhelmed with workload, has far reaching implications for an individuals’ wellbeing beyond academic performance.

We focus on the frameworks of self-determination theory, engineering belonging, identity, to better understand undergraduate …

Can We Make Our Robot Play Soccer? Influence Of Collaborating With Preservice Teachers And Fifth Graders On Undergraduate Engineering Students' Learning During A Robotic Design Process (Work In Progress), Krishnanand Kaipa, Jennifer Kidd, Julia Noginova, Francisco Cima, Stacie Ringleb, Orlando Ayala, Pilar Pazos, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

This work-in-progress paper describes engineering students’ experiences in an NSF-funded project that partnered undergraduate engineering students with pre-service teachers to plan and deliver robotics lessons to fifth graders at a local school. This project aims to address an apparent gap between what is taught in academia and industry’s expectations of engineers to integrate perspectives from outside their field to solve modern societal problems requiring a multidisciplinary approach. Working in small teams over Zoom, participating engineering, education, and fifth grade students designed, built, and coded bio-inspired COVID companion robots. The goal for the engineering students was to build new interprofessional skills, …

Enabling Resilient Educational Support Network During Covid-19 Pandemic For Undergraduate And Second Career Seeking Students, Phillip Dillulio, Oleksandr Kravchenko, Konstantin Cigularov

Psychology Faculty Publications

During times of local and national quarantine due to the COVID-19 pandemic, universities had to close campuses and expediently convert operations and services from face-to-face to virtual learning environments, including virtual classrooms, learning communities, offices, and meeting/advising rooms. Many engineering faculty and students experienced personal, technical, and psychosocial challenges associated with this dramatically altered reality, which may have significant and unprecedented effects on their personal and academic lives. The current study presents results from a needs assessment survey examining the perceptions of 157 engineering students majoring in mechanical and aerospace engineering about the strengths and challenges exhibited by their professors/instructors …

Design A Class Infusion Project Of Asme Geometric Dimensioning And Tolerancing Standard, Cheng Y. Lin, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

This paper describes the development of a short course of Geometric Dimensioning and tolerancing (GD&T) for Mechanical Engineering (ME)/Mechanical Engineering Technology (MET) students in their freshman/sophomore classes. This class-infusion project was assisted and validated by an ASME Standards and Certification Engineer and was jointly sponsored by the ASME Committee on Engineering Education and the ASME Council on Standards and Certification. To assess the performance of the project, an instrument was developed with multiple-choice problems and survey questions for the students. The results of a field test in a sophomore manufacturing class are presented. The module is available at the ASME …

How Architecture And Engineering Students Conceptualize Design Creation: Report Of A Pilot Study, Shannon Chance, Mike Mimirinis, Ines Direito, John E. Mitchell, Emanuela Tilley

Conference papers

This study uses phenomenographic research methodologies to identify qualitatively different ways engineering and architecture students conceptualize design creation; it seeks to discover if and how their conceptualizations of design creation relate to their conceptualizations of knowledge generation. This work extends prior research by King and Kitchener (1994) and others (Baxter Magolda, 1992; Belenky, Clinchy, Goldberger, & Tarule, 1986; Hofer & Pintrich, 2002; Perry, 1970) about the ways students develop increasingly sophisticated ways of: understanding and conceptualizing knowledge; sources of truth; how to evaluate various opinions and points-of-view; and ways to assess truthfulness and validity of new ideas. This project stems …

Lessons From Two Years Of Eportfolio Implementation In Engineering Technology Courses, Orlando M. Ayala, Otilia Popescu

Engineering Technology Faculty Publications

In an undergraduate as well as in a graduate academic setting, an ePortfolio is a collection of student work designed to exhibit student’s achievements, which often includes student’s reflective commentaries. While in academia ePortfolios are used to document the student learning process over time, they have been also well received by employers as work portfolios or showcases. This paper provides detailed explanations of two years of implementation of ePortfolio activities in junior and senior level engineering technology courses. The goal of the paper is to present to the community the best practices learned during the implementation and to provide information …

Overview Of Game And Content Design For A Mobile Game That Will Prepare Students In Calculus And Physics Prerequisites To The Engineering Curriculum, Katherine Smith, John Shull, Patrick Sean Heaney, Yuzhong Shen, Anthony W. Dean, Jennifer G. Michaeli

VMASC Publications

As part of a research project which assists veterans as they exit the military, complete engineering degrees, and enter the workforce as engineering professionals, a range of serious games for Science, Technology, Engineering, and Mathematics (STEM) education is under development. The current focus of this development is CAPTIVATE, a serious game to assist student veterans in mastering the calculus and physics skills that are necessary prerequisites to the main engineering curriculum. Building on the development and lessons learned from MAVEN, a game developed previously to help student veterans master precalculus skills, the design and initial implementation for CAPTIVATE involves careful …

Unite 3d Rover Summer Workshop: An Overview And Assessment, Steve C. Hsiung, Walter F. Deal, Francis Tuluri

Engineering Technology Faculty Publications

The article offers information about UNITE, a program sponsored by the U.S. Army Educational Outreach Program (AEOP, 2015). It mentions that the STEM Enrichment Activities of AEOP are designed to spark student interest in science, technology, engineering, and mathematics (STEM) especially among the underserved and those in earlier grades and educators by providing exciting, engaging, interactive, hands-on STEM experiences (USAEOP).

How Well Do Engineering Students Retain Core Mathematical Knowledge After A Series Of High Threshold Online Mathematics Tests, Michael Carr, Fiona Faulkner, Cormac Breen, Mark Prendergast

Articles

In the Technological University Dublin, high threshold core skills assessments are run in mathematics for third year engineering students. Such tests require students to reach a threshold of 90% on a multiple-choice test based on a randomised question bank. The material covered by the test consists of the more important aspects of undergraduate engineering mathematics covered in the first two years of the Honours degree programme and/or the three years of the Ordinary degree programme . Students are allowed to re-sit the assessment as frequently as required until they pass. In order to measure the effectiveness of such an exercise …

Leading A Horse To Water: Writing Workshops For Engineering Graduate Students, Susan Wainscott, Julie A. Longo

Library Faculty Presentations

A workshop series sponsored by the Howard R. Hughes College of Engineering of the University of Nevada, Las Vegas (UNLV) seeks to dispel the myth that engineers cannot be good writers.

Using Design Hierarchy In A Linear Circuits Class To Illustrate The Scientific Method As A Human Invention, Douglas Deboer

Faculty Work Comprehensive List

There are various ways to classify academic studies. One might make a “two cultures” division, separating academic studies into the humanities and sciences. Or one might have three divisions: humanities, social sciences, and natural sciences. Or one might choose to classify academic studies along the lines of traditional academic disciplines such as theology, law, art, music, economics, social studies, languages, political studies, history, psychology, biology, physics, chemistry, math, etc. In our era of global commerce, where does engineering fit in these types of classification? What should engineers study? In a 2008 presidential debate, candidate Barack Obama said that, “Ensuring that …

Design, Development And Evaluation Of An Interactive Virtual Haptics-Augmented Training System For Undergraduate Engineering, Robert L. Williams Ii, Ernur Karadogan, David R. Moore, Tian Luo

STEMPS Faculty Publications

No abstract provided.

Does A Link Exist Between Examination Performance And Lecture Attendance For First Year Engineering Students ?, Aidan O'Dwyer

Conference papers

The objective of this study is to examine if a link exists between lecture attendance and examination performance of Level 7, Year 1, Electrical Engineering students at Dublin Institute of Technology in the Electrical Systems subject. Lecture attendance was monitored and analysed over four academic years (2007-8, 2008-9, 2009-10 and 2010-11). The average lecture attendance for students in the three academic years from 2007-10 was 55%, increasing noticeably in the 2009-10 academic year. A statistically significant weakly positive correlation between lecture attendance and examination performance was established. Each 10% increase in student attendance at lectures improved both Module 1 examination …

Analysis Of Engineering Students Learning Styles On Level 7, Level 8 And Level 9 Programmes, Aidan O'Dwyer

Conference papers

This contribution reports on research, carried out over three academic years, into the learning styles of engineering students, on a number of Level 7, Level 8 and Level 9 programmes at DIT, using the index of learning styles survey developed by Felder and Soloman (1991). The contribution explores the results obtained in detail, placing them particularly in the national context. The correlation between student performance and individual learning styles is examined. Knowledge of the strongly visual learning style of these cohorts of students may be used to improve the learning environment.

Learning Styles Of First Year Level 7 Electrical And Mechanical Engineering Students At Dit, Aidan O'Dwyer

Conference papers

This paper investigates the learning styles of first year, Level 7, mechanical and electrical engineering students at DIT, using the index of learning styles survey as developed by Felder and Soloman [1]. Student learning styles on these programmes are compared with the results from other such surveys. The correlation between student performance and their individual learning styles is examined in outline. Knowledge of the strongly visual learning style of these cohorts of students may be used to improve the learning environment.

Using Basic Computer Aided Drafting And Design Courses At The Freshman Level To Improve Technology Students Competitiveness In Obtaining Early Academic Career Internships, Anthony Dean, Mustafa Moustafa, Julie Moustafa

Engineering Technology Faculty Publications

Many students have the desire to have internships and part-time employment during their academic careers. Often students in their freshman and sophomore years in four year engineering and technology programs find it difficult to be competitive against more senior students for these positions. This paper discusses how students, in the Mechanical Engineering Technology (MET) program at ________________University, through taking CAD and Solid Modeling courses early in their academic careers are well suited to be competitive in obtaining internships and part time employment. This paper discusses the MET programs first two years’ curriculum and how it prepares the students to enter …

Engineering Management- The Minor Of Choice, William Peterson, Paul Kauffmann, Charles Keating, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

The minor in engineering management provides several real benefits to undergraduate engineering and engineering technology students, not the least of which can be a substantially larger starting salary. The other benefits it offers students are in the skill sets developed (project management, engineering economics, organization behavior / principles of management, and either statistical concepts or decision techniques), the preparation to start an engineering management graduate degree, and the bridging of the competency gaps identified in several national surveys. This paper addresses the benefits of the minor to engineering management programs.

Global Engineering In An Interconnected World: An Upper Division General Education Cluster At Old Dominion University, Sushil Chaturvedi, Gary Crossman, William Swart, Joseph Betit

Mechanical & Aerospace Engineering Faculty Publications

The “Global Engineering in an Interconnected World” cluster of courses fosters among students an awareness and understanding of global technology, quality assurance standards, and differences in cultural, communication, and business practices and their impact on a global work environment. This cluster will prepare the growing numbers of students who will accept employment with global firms or find themselves part of a merger or strategic alliance involving multinational corporations. This newly approved cluster of five courses described in the paper has been approved by the University for satisfying University upper-division general education requirements. As a consequence, students choosing this route to …