Education Commons^™

Passive Vs. Active Wearable Technology Monitoring Trunk Flexion In Elementary Teachers, Bailey Jose

Theses and Dissertations

The objective of this study was to assess the biomechanical and subjective measures of elementary school teachers while wearing active and/or passive wearable devices during the average workday. Five elementary school teachers wore a harness that held an Upright GO 2 posture tracking device and a Vicon Blue Trident sensor on the participant's upper back for two school days. Haptic feedback was on for one day and off for the other. Data from the Vicon wearable was analyzed to determine participants’ trunk flexion severity, frequency, and duration. Surveys were used to determine perceived exertion and perception of wearable technology. This …

Manufacturing & Service Systems, Robert S. Keyser

KSU Distinguished Course Repository

An analysis of decision making in the current production environment and the tools and optimization models needed for finding solutions to problems relating to production planning and scheduling, inventory, and warehouse design.

Development Of A Multivariate Poisson Hidden Markov Model For Application In Educational Data Mining, Shahab Boumi

Electronic Theses and Dissertations, 2020-

Managers and policymakers in higher education institutions try to improve graduation rates and decrease halt rates. To achieve this goal, it is important to understand academic and demographic factors that correlate with academic performance. Many studies in the field of education analytics have identified student grade point averages (GPA) as an important indicator and predictor of final academic outcomes (graduating or halting their studies). While semester-to-semester fluctuations in GPA are considered normal, significant changes in academic performance may warrant more thorough investigation and consideration, particularly with regard to final academic outcomes. However, it is challenging to represent complex academic trajectories …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

A Vision-Based Quality Control Model For Manufacturing Systems, Alejandra Figueroa-Lopez

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Alejandra Figueroa-Lopez on November 25, 2021.

Design And Analysis Of The Virtual Reality Welding Training, Ritesh Chakradhar

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ritesh Chakradhar on November 19, 2021.

Replicating Lean Six Sigma Green Belt Education, Martinus J. Buijvoets, Bob Walrave, Jukka-Matti Turtiainen, Gregory H. Watson

International Conference on Lean Six Sigma

Purpose – This paper describes the intricates and possibilities of replicating a Lean Six Sigma Green Belt (LSSGB) education model from a pilot program to other universities—employing ‘replication as strategy’—based on a validated ‘business model.’

Study design/methodology/approach – This work is grounded in a case study on the ESTIEM LSSGB educational method and draws on the replication literature. Specifically: (1) replication as strategy (Winter and Szulanski, 2001) to replicate stimulating learning environments, and (2) replicating sets of teaching practices (Baden-Fuller and Winter, 2007). These theories are practiced using data obtained from various sources: Participant-observer data, interview data, and secondary case …

The Application Of Measures Of Lean Production For Services, Willem Salentijn, Jiju Antony, Chad Laux

International Conference on Lean Six Sigma

This paper gives insights on how to measure the degree of lean for services and explores existing instruments, proposing adaptions on an existing instrument, developed for production.

From Letters To Logistics - The Enabling Role Of A Lean Transformation Programme In A National Postal Service: The Case Of An Post, Ireland, Seamus O'Reilly, Leadiing Edge Group, An Post

International Conference on Lean Six Sigma

From Letters to Logistics - The enabling role of a lean transformation programme

in a national postal service: The case of An Post, Ireland

Seamus O’Reilly (Cork University Business School), David Murray (An Post) and Joe Aherne (Leading Edge Group)

Abstract

Purpose

This paper investigates the role of a lean transformation programme in supporting the transition of a national postal (mail) service from a traditional letter delivery service to a competitive parcel delivery service.

Methodology

Given the objective an intrinsic case study (Stake, 2005) approach was adopted, as this specific case was of interest. To support this approach the researchers …

Six Sigma And Lean Approach For Enhanced Process Value Chain, Maryam Zulfiqar

International Conference on Lean Six Sigma

Abstract

This research highlight the different aspects of implementing lean and six-sigma approach, their contrasting features and integration in manufacturing organizations. Qualitative research method has been used to conduct this research as the defined period of time for the research was limited. This method was pertinent for the deep analysis of literature and case studies of concerned approaches. It helped to conduct the research in a subjective manner. The use of secondary data saved time from preparing the questionnaires or surveys also the ethical approval from the University of the West of Scotland was not required. Descriptive feature of qualitative …

Applying Lean Six Sigma And Systematic Layout Planning To Improve Patient Transportation Equipment Storage In An Acute Care Hospital, Sandra Furterer, Pratheeka Kancharla

International Conference on Lean Six Sigma

Purpose:

The purpose of this project was to optimize the patient transportation process at an acute care hospital to achieve reduced transportation times.

Methodology:

A detailed Lean Six Sigma study on the patient transport and equipment handling processes helped to determine possible ways to reduce the equipment handling time which eventually reduces the patient transportation time. The Systematic Layout Planning (SLP) approach usually applied in manufacturing environments was used to identify which patient transport equipment was needed to be stored in which locations throughout the hospital footprint. The assignment of equipment to locations was determined based on frequency of use, …

El Español En Estados Unidos Como Recurso Para La Educación De Hispanos En Ingeniería, Hiram Moya

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Los Hispanos representan la más grande minoría en Estados Unidos. Sin embargo, el número de estudiantes hispanos en las carreras de ciencias y en particular en ingeniería ha estado subrepresentada por muchos años. Esta falta de representación ha hecho que se estudie de muchas formas los métodos de reclutar y retener y graduar estudiantes hispanos en ingeniería. Sin embargo, la urgencia continúa. Existen muchos retos para mejorar la participación de hispanos en ingeniería, incluyendo la falta costumbre en preguntar o solicitar ayuda, los retos económicos, y la falta de ejemplos a seguir en la facultad. Dado los retos, este artículo …

Novel Approach In Measuring Training Effectiveness, Thomas Samuel

Theses and Dissertations

NOVEL APPROACH IN MEASURING TRAINING EFFECTIVENESS

by

Thomas Samuel

The University of Wisconsin-Milwaukee, 2020

Under the Supervision of Dr. Naira Campbell-Kyureghyan

Conducting training for employees is a popular method, in industry, to increase awareness and competencies of individuals that helps start the journey towards a change in performance. Globally, fiscal investments in the order of hundreds of billions of dollars annually are made by organizations and governments to train employees in various concepts. Of the various types of training programs, safety related training is specifically important as it increases awareness of the work risks to employees and plays a critical …

Embedding Computer Simulation Based Classroom Activities To Enhance The Learning Experience For Manufacturing Systems, Tzu-Liang Bill Tseng, Md Fashiar Rahman, Richard Chiou, Ivan Arturo Renteria-Marquez, Aditya Akundi, Amit J. Lopes, Jeevarathinam Senthilkumar

Manufacturing & Industrial Engineering Faculty Publications and Presentations

In recent time, manufacturing environment are bracing higher end technologies to achieve high productivity, efficiency and effectiveness. Due to the adoption of the sophisticated technologies, the system is becoming very complex and stochastic. Moreover, the manufacturing system is interconnected among its different subsystems and components, which cannot be described only through the theoretical explanation. Here, computer simulation can be integrated to design and visualize the stochastic and complex system. This paper uses the advantage of simulation to describe a series classroom activity using SIMIO software, which are deployed in industrial systems simulation course in the University of Texas at El …

Expanding Engineering And Technology Opportunities To Students In The Border Region Through International Collaboration, Jesus A. Gonzalez-Rodriguez, Immanuel Edinbarough, Adriana Rios-Santiago, Anabel Pineda-Briseno

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Expanding Engineering and Technology Opportunities to Students in the Border Region through International Collaboration

For some years now, our Department of Engineering Technology of the XXXX, has collaborated with Universities across the southern border to carry out different activities such as undergraduate research, collaborative course-based projects, and senior design projects. We have observed how students benefit from being exposed to work in multidisciplinary and multicultural teams.

We now expand this form of work to a higher-level research collaboration where students and faculty from four different institutions participate. Two institutions of higher education in Mexico and a University and a Community …

Product Realization Capstone: Element Proof Safety Steps For Willie Price Lab School, Catherine Thomas, Allan Heuerman, Jared Mumme

Honors Theses

The purpose of this document is to describe the process we took to complete our capstone which paired the Center for Manufacturing Excellence with the Willie Price Lab School. The goal of the capstone was to remake step stools for the students of Willie Price, as the last stools failed to withstand weather damage. However, with the COVID-19 pandemic, plans were hindered, shifting the goal from actually producing the steps to creating instructions so that a younger Center for Manufacturing class could complete the production at a later date. Standardized Work Instructions, a detailed production plan, and engineering drawings were …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Utilizing Institutional Data For Curriculum Enhancement To Improve Student Success In Undergraduate Computing Programs, Prateek Basavaraj

Electronic Theses and Dissertations, 2020-

Student success is one of the widely discussed topics in post-secondary institutions and is measured in terms of the graduation and retention rates of programs. The goal of an educational institution is to achieve maximum student success and, hence, high graduation and retention rates. There are multiple studies on factors affecting student success. One of the factors that contributes to student success is the "program curriculum." Unfortunately, the traditional program curricula at many higher education institutions were developed with a belief or assumption that all students possess equal expertise, skills, and follow a similar learning path. The traditional curricular development …

Learning Streams: A Case Study In Curriculum Integration, Mani Mina, Arun K. Somani, Akhilesh Tyagi, Diane T. Rover, Matthew Feldmann, Mack C. Shelley

Diane Rover

During 2004-2005, the Departments of Electrical and Computer Engineering and Mechanical Engineering at Iowa State University in collaboration with educational colleagues in the Research Institute for Studies in Education piloted a new curricula model to improve student learning through vertical integration of educational activities using new program structures. We offered an experimental course sequence during Fall 2004 and Spring 2005, defined as a “learning stream.” A learning stream is a basic element of a novel program structure designed specifically to vertically integrate subject matter across courses. A learning stream merges and re-organizes material to more effectively present and reinforce key …

Effective Resource Utilization In Arkansas Public Schools, Ryan Sanders

Industrial Engineering Undergraduate Honors Theses

Teacher pay in Arkansas public schools varies widely from district to district across the state. This pay discrepancy is driven by both the funds available to a district and by how these funds are allocated. There is a standard per student budget given to districts across the state, but this budget can be supplemented by additional property taxes collected on property within a district. This leaves districts with more highly valued property at an advantage. Districts are free to allocate their budget for teacher pay as they see fit, with constraints on number of students per teacher and minimum teacher …

Influential Factors In Consumer's Adoption Of Innovative Products, Mahdokht Kalantari

Wayne State University Dissertations

This dissertation addresses the challenges involved with the process of diffusion of innovations in the contexts of innovative educational materials and technological innovations.

Chapters 2 and 3 discuss building and using Online Brand Communities (OBCs) to disseminate innovative math educational materials. OBCs are known to be important platforms where consumers can communicate with the brand as well as other consumers. Through the effective use of these platforms, brands could accelerate the process of diffusion of their innovations. However, OBCs will not survive if consumers do not get engaged and participate in these communities. The purpose of this section of the …

Adaptive Learning Pedagogy In Udl And Multi-Modal Training, Ziho Kang, Mattlyn R. Dragoo, Randa L. Shehab, Han Yuan, Lei Ding, Stephen G. West

National Training Aircraft Symposium (NTAS)

Currently, most learning methods are based on classroom teaching through unidirectional communication using boards or slides. However, the Universal Design for Learning (UDL) asserts that the students can increase their performance if the instructors can provide the students with diversified information representation, expression, and engagement means. Although UDL minimizes the mismatch between the teaching and learning styles, we lack the detailed methods to implement the UDL and its associated multi-modal training methods in the context of air traffic control candidates and/or technical operators. We propose an approach that adapts the Index of Learning Styles (ILS) based on four categories: perception, …

Improving Security Efficacy And Patron Wait Times In Bankers Life Fieldhouse At Indiana Pacers Games, Christien Alexander, Shaince Matthews, Ryan Mccavit, Roneisha Watkins, James E. Dietz Phd, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

An Institutional Approach To Lean Six Sigma In Higher Education, Timothy Winders, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

Improving Peruvian Manufacture Of Welding Electrodes, Almendra Morales, Alejandro Gallegos, David Hernandez, Maria Ortiz

International Conference on Lean Six Sigma

No abstract provided.

Evaluation Of Point Of Distribution Exercise, Kristen Dietz, Andrew Barett, Chad Laux Phd, Ryan Tennessen, Randy Black Phd, Pamela Aaltonen Phd, James E. Dietz Phd

International Conference on Lean Six Sigma

No abstract provided.

Implementing Lean Six Sigma In Fda Regulated Technology Transfer, Naina Zachariah, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

Lean Innovation - Funding Stem Education, Samarth Gupta, Chad Laux Phd

International Conference on Lean Six Sigma

No abstract provided.

Exploring A Semi-Virtual Reality System Impacting Learning Curves Of College Students, Hongbiao Yang

Doctoral Dissertations

Virtual reality (VR) is a trending technology used in a broad range of fields including education and has become one of the most promising directions for educators. In this research, the investigation focuses on how the semi-immersive VR application can be used for educational purposes by exploring the VR factors and the interactions between these factors. A theoretical learning framework is also proposed to offer an explanation for the beneficial effects of education brought by VR at a high level.

This research consists of three parts. First, this research will introduce the development of Walk-in-Place Learning System (WIPLS), a semi-immersive …

Learning Lean Six Sigma: A Student Reflective Study, Chad Laux, Ludmila Nunes

International Conference on Lean Six Sigma

Lean Six Sigma has become a worldwide effort at continuous improvement. As it becomes more prevalent, the teaching and learning of LSS has not caught up with current trends. The purpose of this paper is to understand how students learn Lean Six Sigma in a classroom environment.