Social and Behavioral Sciences Commons^™

A Nomological Network Analysis Of Innovation In Hospitality Education And Industry, Robert H. Rippee

UNLV Theses, Dissertations, Professional Papers, and Capstones

The development of a theory of innovation for hospitality innovation finds heightened importance due to the COVID-19 Pandemic that has unleashed a devastating and sustained disruption on global hospitality and tourism. The problem for research is that the industry lacks a taxonomy for research on innovation in hospitality. This study addresses the gap in understanding the nomological relationship between innovation constructs and the observable manifestations of innovation in the hospitality industry. This study used an emergent basic qualitative design of a phenomenon through data collected in three phases. Two large samples of literature and a series of focus groups comprised …

Is The Digital Economy Too Concentrated?, Jonathan Klick

All Faculty Scholarship

Concentration in the digital economy in the United States has sparked loud criticism and spurred calls for wide-ranging reforms. These reforms include everything from increased enforcement of existing antitrust laws, such as challenging more mergers and breaking up firms, to an abandonment of the consumer welfare standard. Critics cite corruption and more systemic public choice problems, while others invoke the populist origins of antitrust to slay the digital Goliaths. On the other side, there is skepticism regarding these arguments. This chapter continues much of that skepticism.

Pinduoduo: Empowering Farmers With An E-Commerce Platform, Hao Liang, Sin Mei Cheah

Research Collection Lee Kong Chian School Of Business

A case study on how Pinduoduo's dedicated portal has helped farmers during the Covid-19 outbreak.

The Importance Of Innovation And Entrepreneurship In China’S Social Transformation, Guo Jun Shen

Dissertations and Theses Collection (Open Access)

As world’s second largest economy, China has seen tremendous changes since its 1978 “open door and reform” policy. Different reformations in form of policies were planned and rolled out to release the potential of productivity. At the same time, social development also seen a huge progress. How the reformation been transformed to social development and in what degree? This is the question was answered in this dissertation. I studied four major reformations covering: State owned Enterprises (SoE), land, financial liberalization, and science and technology, and their impacts on the social development. At macro level, I identified mediation effects of entrepreneurship …

Is More Always Better? A Reflection On The Dynamic Nature Of Nationally And Regionally Focused Funder Collaboratives, Jo Carcedo, Merry Davis, Megan Folkerth, Lori Grubstein, Chris Kabel

The Foundation Review

Funding collaboratives allow foundations to align, increase effectiveness, and collectively address systemic issues. Such alliances are increasingly important in the quest for social change in the face of large-scale challenges like climate change, political polarization, and inequity, which require contributions from across sectors to create meaningful impact. An exploration of why such collaboratives form, how they evolve, and what impact they have offers insights for foundations interested in tackling such complex challenges.

The BUILD Health Challenge® is a funding collaborative that includes national and regionally focused funders working together to drive sustainable improvements in health. Through a reflective survey and …

Lessons From The Assessment For Learning Project: Strategies For Building An Authentic Learning Community, Heather Lewis-Charp, Daniela Berman, Sarah Lench, Tony Siddall

The Foundation Review

This article explores findings from an evaluation of the Assessment for Learning Project, a grantee engagement strategy led by the Center for Innovation in Education focused on creating a learning community founded in continuous reflection and safety for risk-taking. The article shares the project’s model and approach, grounded in the core design elements of a field-facing learning agenda, grantmaking that leads with learning, and collective leadership.

This article highlights the Assessment for Learning Project’s practices, such as a Request for Learning rather than traditional Request for Proposals; a requirement that grantees provide formative feedback to each other; and public demonstrations …

A Path To Digitalisation Featuring The Dbs Story, Robin Speculand

Perspectives@SMU

Digitalisation of businesses has been rapidly increasing over the last few years and now it has become a necessity, rather than an option, for many. The article provides a path and model for leaders to transform their business. It starts by recognising that businesses need a digital vision driven by customers’ requirements and explains how to build centricity and be ready for the future.

Getting On The E-Commerce Carousell, Singapore Management University

Perspectives@SMU

Carousell has achieved impressive user numbers. Can the online marketplace now convert that into profitability?

Technological Entrepreneurship And Dynamic Entrepreneurial Capabilities In Indian It Industry, C. A. Anne Benedexa Ph.D.

International Review of Business and Economics

Entrepreneurship acts as a pillar for the economic prosperity of a nation as it leads to generation of employment contribution in national income, rural development, industrialization, technological development, export promotion etc. Technological Entrepreneurship (TE) is an important way to commercialize technological innovations and offers unique development opportunities for societies to educate and grow. Technology development and entrepreneurial capabilities spirit fuels growth of the nation. Dynamicentrepreneurialcapabilityis to examine how a small entrepreneurial firm can achieve successful product innovation and technology change by substituting the traditional drivers for innovation, such as patenting capabilities, in-house research and development and expert human capital with …

Thinking And Designing With Design Thinking, Ahmet Can Ozcan, Yasuko Takayama

Markets, Globalization & Development Review

Design Thinking is a popular phrase especially for the last ten years penetrating into the discourse of management and design, business and academia in many ways. The contributions in the form of articles, commentaries and reviews in this MGDR Design Thinking Special Issue show us the examples, how and where we can use Design Thinking especially as an integral part of the design process. The area of design is expanding in diverse ways lately and sometimes it is causing the confusion such as Design Thinking is either a magical design tool, or another buzzword destined to go extinct after inevitable …

Factores Determinantes De Innovación En Las Empresas De Los Sectores Comercio Y Servicios: Análisis Econométrico De La Encuesta De Desarrollo E Innovación Tecnológica Edit 2017, Jhonathan Rolando Largo Gonzalez, Manuel Alejandro Monroy Gonzalez

Economía

En el presente trabajo se analizaron los factores determinantes de innovación en los sectores de comercio y servicios en Colombia a partir de los datos obtenidos de la encuesta de desarrollo e innovación tecnológica EDIT (2017), los cuales son empleados en un Modelo Logit para encontrar las probabilidades que tienen las empresas para innovar. Se pudo concluir que el tamaño de las firmas, el nivel de educación, la inversión y la financiación son variables que tienen un alto grado asertividad para la generación o no de innovación

Mechanized Percussion Well Drilling, Nathan A. Henry, Nate Harnish, Nathan D. King, Chris Martin, Tommy Denlinger, Darren J. Heisey, Griffin M. Means

2020 Collaboratory/Engineering Symposium

The Mechanized Percussion Well Drilling Project seeks to design a simple mechanized well drilling system to be used for drilling shallow water wells in Burkina Faso, Africa. These systems will be operated by local drilling teams, allowing them to earn an income for themselves and their families. Currently our end users, the Burkinabe Well Drilling Team, have trouble drilling through hard rock layers, and often must abandon holes due to inadequate equipment. The goal of this project is to enable the drillers to efficiently drill through these rock layers with a mechanized percussion rig and supporting drilling equipment.

One of …

Landmine Neutralization: Air Excavator, Nuttapat Kueakomoldej, Hunter D. Casey, Andrew F. Kurian, Evan Poust

2020 Collaboratory/Engineering Symposium

The Landmine Neutralization team’s goal is to help neutralize dangerous ordnance in wartorn areas around the world. To accomplish this, the project team is working with our client, the HALO Trust. They are the world’s largest demining non-governmental organization. The HALO Trust works in many countries to remove the debris of war, including improvised explosive devices, landmines, and unexploded ordnance. We are helping our client achieve their goals through designing, prototyping, and testing of an earth and debris excavator that uses air to excavate areas. This project will help HALO’s deminers clear debris and dust from war-torn areas to help …

Fluency Assistance Device, Michael D. Jenkins, Larry A. Vega, Corey Bean, Jacob R. Cornwell, Lydia Reber, Arrington Register

2020 Collaboratory/Engineering Symposium

Currently about 1% of the world population (~70 million people) have a stutter considered a fluency disorder. Some fluency assistance devices are available for this population, but most are highly expensive or unreliable. Fluency Assistance Device (FAD) seeks to assist a niche community of these individuals for whom therapy has been unsuccessful but are currently depending on a device originally known as the Edinburgh Masker. FAD aims to redesign the masker to be more comfortable for the end user. FAD is developing versions 1.1 and 2.0 of the improved masker. Version 1.1 will update the original masker circuitry with surface …

Solar Pv - Equipping The Future, Christopher E. Benner, Collin T. Binford, Joshua J. Kripas, Trey B. Witmer, Jonas E. Kolb, Noah A. Rood

2020 Collaboratory/Engineering Symposium

The Solar PV team has installed several solar power systems for various partners in the developing world. Most recently, the team installed a solar-powered well pump at the Living Love Ministries Children’s Home in Ol Kalou, Kenya. As is true for all the previous installations, the team gained a wealth of valuable knowledge and experience on the trip to Kenya. A problem the team faces is that a lot of that experience gained leaves when seniors graduate. With the goal of passing on our knowledge and experience to future generations of the Solar PV team, we have been constructing a …

Gravity Fed Water System, Ella Sobek, Sarah A. Aldrich, Jordan E. Higley, Joseph Grant

2020 Collaboratory/Engineering Symposium

The Gravity Fed Water Project aims to provide direct access to safe and clean water to about 150 people in Sipacapa, Guatemala by using gravity to transport water from groundwater seeps down a mountain to the community. The project partners with the Mennonite Central Committee. Concrete intake structures will be built for various groundwater seeps, then water from those will be combined into one large concrete intake structure. The water will then be piped down to a concrete water tank which will help to store enough water for a day's use for the village. There will then be piping going …

Small-Scale Hydroelectric Power For Remote Communities, Robert Kameron Dickey, Edward J. Yesilonis, Cameron K. Kanter, Andrew S. Reedy, Caleb P. Southwick

2020 Collaboratory/Engineering Symposium

The Pico-Hydro Energy Project (PHEP) focuses on providing affordable electric power for off-grid communities in developing countries. The work that PHEP is doing involves the design, optimization, and experimental testing of small hydroelectric generators provided by our project partner Engineering Ministries International.

Nicaragua Block Press, John P. Mcgarry, Kathryn J. Rose, Derek A. Thrush, Jordan P. Criddle, Samuel Rivera, Robert Donley, Claudia Tolley

2020 Collaboratory/Engineering Symposium

Friends In Action International (FIA), our project partner, is assisting the Rama people of Nicaragua in relocating from an overpopulated island to the mainland. Our team has developed a manual press for the Rama people to produce compressed earth blocks from local materials for construction of their homes. After testing an initial prototype of the press in Nicaragua it was determined that the press needed more durability. After testing two presses with welded chambers manufactured by E&E Metal Fab Inc., further modifications were required such as welding chamber skirts, adding a lid handle, and applying rust prevention coating. Once both …

Energy Monitoring And Management System, Nathan C. Feldgus, Zachary D. Schmidt, Bennett A. Andrews, Zach L. Gillen, Zachery D. Holsinger, Benjamin Weaver, David Williams

2020 Collaboratory/Engineering Symposium

The Energy Monitoring and Management System facilitates access to electric power in regions with limited energy by increasing energy conservation and education. The solution consists of a meter which allocates a configurable daily energy limit per facility, and a display that provides practical information to the user including reporting how much energy they have used and how much they have left before their power is automatically cut off until the next day.

The current version of the system has successfully been installed in multiple facilities in Burkina Faso and Zimbabwe, however software errors are preventing the system from meeting client …

Village Water Ozonation System, John M. Khamis, Benjamin K. Burlew, Timothy J. Malanga

2020 Collaboratory/Engineering Symposium

Safe drinking water is something that all humans need. People around the globe face issues like limited access to water, water scarcity, and contamination of their water supply. Alleviating global water-related illnesses and deaths remains a prevailing challenge to overcome. With this in mind, the Village Water Ozonation System (VWOS) team works with communities to increase their access to safe drinking water. In the past few years, VWOS has had the privilege of walking alongside our partner communities in Mexico, Pakistan, and Nicaragua to develop sustainable drinking water solutions. Through collaborations with several Christian organizations such as Forward Edge International …

Remote Hand Pump Monitoring In Africa, Cory D. Brubaker, Amada H. Issis, Evan Freed, Daniel J. Labrie, Josiah J. Mccarthy

2020 Collaboratory/Engineering Symposium

Millions of communities in developing countries rely on hand pumps installed by various non-governmental organizations (NGOs). Studies have shown that these pumps are often broken with significant delays before maintenance people arrive. During the last few years, the Intelligent Water Project (IWP), in cooperation with World Vision and AlignedWorks has successfully produced sensor units, installed on each water pump to provide state of operation information, which proves the feasibility of remote monitoring through a real-time web-based database. Currently, we are working to demonstrate reliability, improve accuracy, and prepare for production on a larger scale to expand the impact to more …

A Sustainable Mobility Solution For Persons Living With Disability In Burkina Faso, Helen R. Wiley, Brit Haseltine, Cory Hurst, Alexander D. Mantsevich, Katie Bunch, Faith N. Kerlen, Joey Sinsel, Matt Higgs, Rachel Delate

2020 Collaboratory/Engineering Symposium

The Sustainable Mobility project of the Collaboratory empowers people living with a disability in rural West Africa to more fully participate in family and community life and makes possible the pursuit of educational and work opportunities. Our 3-wheeled off-road wheelchair has transformed the lives of dozens of clients through partnerships with the Center for the Advancement of the Handicapped in Mahadaga, Burkina Faso and the Center of Hope in Fada, Burkina Faso.

Now, to reach more people in new locations and with more partners, Sustainable Mobility is working to reduce manufacturing time and cost, author image-driven fabrication guides to enable …

3d Mapping With An Unmanned Aerial Vehicle, Johnny Greaser, Micah D. Lehman, Geoffrey D. Mcclary, Kyle E. Miller

2020 Collaboratory/Engineering Symposium

Missionary aviation pilots often have to land their planes on remote airstrips that might be unsafe due to runway obstructions such as encroaching vegetation or large objects that were unknowingly placed on the runway. The Falcon Unmanned Aerial Vehicle (UAV) team is partnering with ITEC to develop an imaging system using a UAV to scan these airstrips to detect these obstructions. ITEC was founded by Steve Saint, the son of martyred missionary Nate Saint, to develop technologies to aid missionaries in their work. This video highlights the work of the Falcon UAV team and the basic terms and definitions for …

Sustainable Agriculture: Aquaponic Solutions, Landon R. Hacker, Jared Fonda, Noah T. Shreiner, Brandon M. Bickom, Micah Hess

2020 Collaboratory/Engineering Symposium

The Sustainable Agriculture team is using a soil-free, closed-loop, agricultural technique called aquaponics to help lift communities out of malnutrition and poverty. Aquaponics techniques decrease the use of natural resources associated with growing crops. The Sustainable Agriculture team is partnering with Sheltering Wings, a non-profit based in Missouri who ministers with an orphanage and women's shelter in Yako, Burkina Faso and Transworld Radio, a Christian radio broadcasting station located in Benin. The team currently has a best practice prototype in operation. The system will be optimized to fit client needs. In order to meet those needs, the team has been …

Force Characterization And Manufacturing Of A Dynamic Unilateral Clubfoot Brace, Rebekah L. Forshey, William L. Feczko, Liam P. Lilienthal, Aaron Bashore, Brittney D. Fouse, Michelle Lo, Benjamin J. Mellott, Sam J. Rasinske, Leigha R. Southall, Jordan M. Witt

2020 Collaboratory/Engineering Symposium

Clubfoot is a musculoskeletal birth defect that is characterized by an inward twisting of an infant’s feet. The current method for correction involves several casts and a bilateral boots-and-bar maintenance brace. This method of maintenance requires 5 years of bracing and has issues with compliance, comfort, and social stigma. CURE International in Kijabe, Kenya is currently using the boots-and-bar brace but is interested in implementing a design that reduces these concerns. Mr. Jerald Cunningham, CPO, designed and is utilizing a unilateral clubfoot maintenance brace, the Cunningham Brace, which he expects will reduce treatment time to 2-3 years, lessen the social …

Designing A Locally Manufacturable Wheelchair For Nepal, Harrison J. Crosley, Alexander M. Vollert, Cade K. Bender, Dylan J. Derstine, Peter C. Hopkins

2020 Collaboratory/Engineering Symposium

Persons with disabilities in developing countries often lack the basic equipment needed to assist them in their daily lives. International Nepal Fellowship (INF) is a Christian medical organization located in Nepal that provides medical care and assistance to people with disabilities and other conditions. Currently, INF imports expensive wheelchairs that undergo a prolonged border process before being received by INF. INF has reached out to the Collaboratory to design a wheelchair that can withstand the challenges of Nepal’s terrain and can be manufactured from local materials. The Nepal Wheelchair team accepted this challenge and set out to design a wheelchair …

Quantifying Hiv-1 Viral Load With Fluorescence Correlation Spectroscopy, Nathan Z. Chan, Alicia A. Decker, Brant L. Meier, Morris K. Taylor, Nathan E. Cordell, Benjarong T. Curtz, Jeffrey Gao, Joshua Keong, Al W. Mokris, Jessica E. Paulus, Castine L. Donoff

2020 Collaboratory/Engineering Symposium

The DVD team is working to develop a cost-effective technique for measuring HIV load in resource-restricted regions. Our client is Dr Phil Thuma and the Macha Research Centre in Zambia. Our design utilizes a fluorescence correlation spectroscopy (FCS) approach, including a protein-engineered probe, custom optics, a field programmable gate array (FPGA), and a graphical display to assess viral load in a patient blood sample. In this talk we will present on the design and testing of our optical FCS system, the method of processing and analyzing the signal, and creation of the user interface display. Our team is currently finalizing …

Covenant Christian Academy - Civil Design, Justin M. Blest, Christian A. Cornelius, Corey B. Englehart

2020 Collaboratory/Engineering Symposium

The Covenant Christian Academy Civil Design team has partnered with Covenant Christian Academy (CCA) in Harrisburg, Pennsylvania to improve the utilization and safety of the facilities at the rear of the main building. The team worked with David Sonju, Headmaster at CCA and client representative for the school, to achieve two major goals for this project. The first goal was to redesign the rear parking lot to create a grass recreation area while integrating the remaining paved area into an improved student drop-off/turn-around. The design considered stormwater run-off and drainage, including conversion of impervious area to pervious area. The second …

Hybrid Thermal Lance, Josiah Stitt, Lucas Honebrink, Frank G. Honey, Emily L. Keane, Josh Card

2020 Collaboratory/Engineering Symposium

The Hybrid Thermal Lance (HTL) is a device used to burn through landmines to destroy them safely. Designed for the team’s client, The HALO Trust, the HTL has proven to work well in destroying explosives, which has been demonstrated by field trials conducted in a number of countries including but not limited to Afghanistan and the Republic of Georgia. The HTL works by igniting acrylic burn tubes, which act as a fuel source and also focus the flame on a specific location on an explosive device. The system is controlled via a user-friendly, rugged control box that can run the …

Prosthetic Knee, Bryson L. Boettger, Matthew J. Tavani, Isaiah D. Bryner, Samuel R. Burgess, Sarah N. Kelchner, Clint M. Meekins, Josiah D. Moyer, Kay Laura Sindabizera

2020 Collaboratory/Engineering Symposium

Amputations, specifically lower limb amputations, are common in Sub Saharan Africa and across the broader global community largely due to infection and disease. Our project, The Prosthetic Knee Team, partners with the orthopedic workshop at the CURE International Hospital in Kijabe, Kenya to create a prosthetic knee design for a specific type of amputation known as a Knee Disarticulation (also called through-knee). Currently, the orthopedic workshop is only able to provide one very expensive prosthetic knee option for these patients, and they often elect to undergo a second surgery, a trans-femoral amputation, because the cost of the second surgery and …