Open Access. Powered by Scholars. Published by Universities.®
Social and Behavioral Sciences Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 16 of 16
Full-Text Articles in Social and Behavioral Sciences
Ddasaccident724, Hd-Aid
Ddasaccident724, Hd-Aid
Global CWD Repository
On 21 Dec 2011, the deminer [the Victim] started his work as usual in the assigned task for him to continue the clearance of the Mine Line (SML) which was laid as a cluster with one AT mine (M19) guarded by 3 APs M35 and after recovering and defusing one AT (19) and 2 APs (M35 / no defusing), the deminer started his work for the second period at 8:45 and he reported one signal to the team leader. The team leader left him to proceed with the proper procedures to recover and defuse the mine and at 8:55 hrs …
Ddasaccident714, Hd-Aid
Ddasaccident714, Hd-Aid
Global CWD Repository
I remember on the 25th of Oct. 2010 on the first part of work I cleared 3 AP mines from the first cluster as all the AT mines are cleared from the belt, then I headed to the next cluster following the team leader orders and started removing a 12 o’clock mine, when I was near its suggested location after making visual check and cleared the grass around it using the light rake I were no injuries thanks god, then the team leader came with deminer {name removed] and checked me and evacuated me walking to the ambulance which was …
Ddasaccident703, Hd-Aid
Ddasaccident703, Hd-Aid
Global CWD Repository
The deminer was working in the centre lane in the main minefield 346 and he recovered 6 M14 APs. At 12:15 hrs he started to approach AP M14 and he located one cluster then he moved to the next one, and while he was conducting visual check stage, he did not follow the proper procedure to remove the grass ,instead of using grass cutter to remove the grass he used his bared hand to pull the grass which accidentally caused the blast.
Ddasaccident655, Hd-Aid
Ddasaccident655, Hd-Aid
Global CWD Repository
Deminer was approaching 9 O’clock M35 AP mine on one of the main mine belt clusters, after she removed the AT mine she located the M35 mine and started to excavate beside the mine, accidently she hit the mine by the heavy rake and caused the blast
Ddasaccident693, Hd-Aid
Ddasaccident693, Hd-Aid
Global CWD Repository
While the deminer was clearing an area assigned to him by the team leader and after he recovered an AT Saci mine he entered the contaminated hazardous area trying to locate the AP M14 12 o’clock mine with out following the SOP and the proper procedure , then he stepped on a non cleared area and activated the M14 which caused a badly injured to his left foot.
Ddasaccident659, Hd-Aid
Ddasaccident659, Hd-Aid
Global CWD Repository
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The deminer was close to the mine and the distance was less than the RAKE handle 2.2 m that the area very sloppy (water course) and the deminer was looking for the missing mines.
Ddasaccident644, Hd-Aid
Ddasaccident644, Hd-Aid
Global CWD Repository
The incident happened due an individual mistake while the deminer investigating an indicated signal by the metal detector in the predicted site of the AP mine within the cluster. The deminer mis approach the mine and hit it from the top which caused the heavy RAKE to press the pressure plate and activated the mine about 2m from the deminer (the length of the RAKE handle). This the second incident with the same deminer and the same scenario.
Ddasaccident676, Hd-Aid
Ddasaccident676, Hd-Aid
Global CWD Repository
While the deminer try to investigate a signal indicated by the metal detector in an expected site of an AP M14 mine, the deminer didn’t approach the signal in the proper procedure and hit the mine with the heavy Rake on the pressure plate which activated the mine and caused the blast 200 away from the deminer
Ddasaccident589, Hd-Aid
Ddasaccident589, Hd-Aid
Global CWD Repository
The team leader [the Victim] was doing a QA check on one of the Foot Track already cleared by the deminer. Out of five mines laid only one M14 AP mine has been recovered from this FT. The team leader was trying to recheck the cleared area again with the metal detector trying to find the missing mine, during his QA check he stepped on one deep buried M14 AP mine in the area which has been already checked by the deminer and Team Leader.
Ddasaccident625, Hd-Aid
Ddasaccident625, Hd-Aid
Global CWD Repository
We took the safety brief before we start working from the team leader then we entered the field, through the 1st period of work I cleared 3 AP mines from the mixed cluster (AP, AT) in Jaber 1 area, on the 2nd period at 9:11 am I cleared a 3 o’clock mine then moved to 9 o’clock mine, while searching I heard a signal and marked it then looked for it using the light rake but because it’s a hard stony area I used the heavy rake then, while progressing 15 cm from the right side I pulled the rake …
Ddasaccident645, Hd-Aid
Ddasaccident645, Hd-Aid
Global CWD Repository
When we arrived to the site the team leader gave us the morning safety brief and he warned us to be very alert about as we work on mine clusters, at 07:30 am I entered my site and the team leader came to direct me to make more space in the clearing area of missing mines, he told me to move to lane one later after finishing my work at the missing mine, lane one is a mixed mine area( has both types of mines M15 and M14 ) and asked me to clear M14 mines because the anti tank …
Ddasaccident678, Hd-Aid
Ddasaccident678, Hd-Aid
Global CWD Repository
The Deminer was trying to check signal using the heavy rake, the M14 mine was laid in a grassy solid ground full of grass root and stones, the deminer tried to drew the grass by the heavy rake, the roots of the grass push the pressure plate of the mine, that cause the mine to blast.
Ddasaccident666, Hd-Aid
Ddasaccident666, Hd-Aid
Global CWD Repository
The deminer was trying to clear the AP mine in a cluster, there was no signal due to the depth of the mines, she asked the team leader to help her in finding the signal, he tried and started to excavate until he found signal, he located and excavated over the signal until he reached 20 cm depth at that time he hit the M14 mine and caused the detonation
Ddasaccident653, Hd-Aid
Ddasaccident653, Hd-Aid
Global CWD Repository
The Deminer today was officiated as a team leader due to the absence of the team leader. He took one deminer tools and started to work himself in one of the remaining cluster in his section. While he was using the grass cutter to cut the grass in front of the base stick he hit the barely covered M14 mine by the grass cutter which caused the mine to initiate.
Ddasaccident599, Hd-Aid
Ddasaccident599, Hd-Aid
Global CWD Repository
After I recovered the main mine (AT M19) and AP mine M14 (12 o’clock direction) I started to recover AP mine M14 (3 o’clock direction) and after a while, I heard a signal, then I applied the standard procedures to investigate the signal and during my approach to the centre of the signal by the heavy rake, AP mine blew up and I did not fell down on the ground and I did not feel any type of pain, then I saw the TL coming to my site and I was just waiting for him to come, after TL reached …
Jordan's National Mine Action Plan (2010-2015), National Committee For Demining And Rehabilitation
Jordan's National Mine Action Plan (2010-2015), National Committee For Demining And Rehabilitation
Global CWD Repository
This second national mine action plan (NMAP) builds on the progress made during the 2005-2009 period. The 2010-2015 plan describes the remaining challenges and NCDR's plans and activities as it enters the final kilometres of its work to make Jordan a safer place.