Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication
- File Type
Articles 1 - 14 of 14
Full-Text Articles in Physical Sciences and Mathematics
Capacitive Behavior Of Latex/Single-Wall Carbon Nanotube Stretchable Electrodes, Hyeon Taek Jeong, Byung Kim, Robert Gorkin Iii, Michael J. Higgins, Gordon G. Wallace
Capacitive Behavior Of Latex/Single-Wall Carbon Nanotube Stretchable Electrodes, Hyeon Taek Jeong, Byung Kim, Robert Gorkin Iii, Michael J. Higgins, Gordon G. Wallace
Robert Gorkin III
In this report single-wall carbon nanotubes (SWNTs) were coated onto latex using spray coating to produce a stretchable electrode. The electrochemical properties of the electrode were determined using cyclic voltammetry and electrochemical impedance spectroscopy and galvanostatic charge/discharge tests were also carried out. The impedance and charge/discharge curves of the latex/SWNTs electrode showed good capacitive behavior even after repetitive stretching to 100% strain. The highest capacitance value obtained for the unstretched SWNTs electrode was 119 F g−1 in 1 M Na2SO4 at 5 mV s−1. After the 100th stretch ≈ 80% of the original capacitance value was retained.
Three Dimensional (3d) Printed Electrodes For Interdigitated Supercapacitors, Chen Zhao, Caiyun Wang, Robert Gorkin Iii, Stephen Beirne, Kewei Shu, Gordon Wallace
Three Dimensional (3d) Printed Electrodes For Interdigitated Supercapacitors, Chen Zhao, Caiyun Wang, Robert Gorkin Iii, Stephen Beirne, Kewei Shu, Gordon Wallace
Robert Gorkin III
Common fabrication techniques typically require multiple and complex MEMS processing steps to create 3D electrode architectures. Here we report on the use of Additive Fabrication metal printing based on Selective Laser Melting (SLM) technology to produce 3D titanium interdigitated electrodes. This was used as a platform to deposit polypyrrole and the resultant structure was evaluated for use as a capacitive electrode. We also demonstrate a solid-state interdigitated supercapacitor using a poly(vinyl alcohol) (PVA)-H3PO4 polymer electrolyte.
Fabricating Electrodes For Amperometric Detection In Hybrid Paper/Polymer Lab-On-A-Chip Devices, Neus Godino, Robert Gorkin Iii, Ken Bourke, Jens Ducree
Fabricating Electrodes For Amperometric Detection In Hybrid Paper/Polymer Lab-On-A-Chip Devices, Neus Godino, Robert Gorkin Iii, Ken Bourke, Jens Ducree
Robert Gorkin III
We present a novel, low-resource fabrication and assembly method for creating disposable amperometric detectors in hybrid paper-polymer devices. Currently, mere paper-based microfluidics is far from being able to achieve the same level of process control and integration as state-of-the-art microfluidic devices made of polymers. To overcome this limitation, in this work both substrate types are synergistically combined through a hybrid, multi-component/multi-material system assembly. Using established inkjet wax printing, we transform the paper into a profoundly hydrophobic substrate in order to create carbon electrodes which are simply patterned from carbon inks via custom made adhesive stencils. By virtue of the compressibility …
Fabrication Of Graphene Electrodes By Electrophoretic Deposition And Their Synergistic Effects With Pedot And Platinum, Widsanusan Chartarrayawadee, Simon E. Moulton, Chee O. Too, Gordon G. Wallace
Fabrication Of Graphene Electrodes By Electrophoretic Deposition And Their Synergistic Effects With Pedot And Platinum, Widsanusan Chartarrayawadee, Simon E. Moulton, Chee O. Too, Gordon G. Wallace
Gordon Wallace
This research presents a useful electrophoretic deposition (EPD) technique for electrode fabrication from an aqueous colloidal solution of graphene to produce graphene electrodes by the deposition of graphene on to indium-tin oxide (ITO) coated glass. Resultant graphene electrodes are composited with conducting polymer (PEDOT), and platinum nanoparticles, to investigate their synergistic effects. Firstly, PEDOT is composited with graphene by electropolymerization on to the graphene layer. The graphene/PEDOT electrodes demonstrate an improvement in electrochemical response in tetrabutylammonium perchlorate/ acetonitrile solution. Secondly, graphene electrodes are composited with platinum by EPD of platinum nanoparticles on to the graphene layer. The resultant graphene/platinum electrodes …
Facile Synthesis Of Reduced Graphene Oxide/Mwnts Nanocomposite Supercapacitor Materials Tested As Electrophoretically Deposited Films On Glassy Carbon Electrodes, Widsanusan Chartarrayawadee, Simon E. Moulton, Chee O. Too, Byung C. Kim, Rao Yepuri, Anthony C. Romeo, Gordon G. Wallace
Facile Synthesis Of Reduced Graphene Oxide/Mwnts Nanocomposite Supercapacitor Materials Tested As Electrophoretically Deposited Films On Glassy Carbon Electrodes, Widsanusan Chartarrayawadee, Simon E. Moulton, Chee O. Too, Byung C. Kim, Rao Yepuri, Anthony C. Romeo, Gordon G. Wallace
Gordon Wallace
This paper reports on a facile synthesis method for reduced graphene oxide (rGO)/multi-walled carbon nanotubes (MWNTs) nanocomposites. The initial step involves the use of graphene oxide to disperse the MWNTs, with subsequent reduction of the resultant graphene oxide/MWNTs composites using l-ascorbic acid (LAA) as a mild reductant. Reduction by LAA preserves the interaction between the rGO sheets and MWNTs. The dispersion-containing rGO/MWNTs composites was characterized and electrophoretically deposited anodically onto glassy carbon electrodes to form high surface area films for capacitance testing. Pseudo capacitance peaks were observed in the rGO/MWNTs composite electrodes, resulting in superior performance with capacitance values up …
Intrinsically Stretchable Supercapacitors Composed Of Polypyrrole Electrodes And Highly Stretchable Gel Electrolyte, Chen Zhao, Caiyun Wang, Zhilian Yue, Kewei Shu, Gordon G. Wallace
Intrinsically Stretchable Supercapacitors Composed Of Polypyrrole Electrodes And Highly Stretchable Gel Electrolyte, Chen Zhao, Caiyun Wang, Zhilian Yue, Kewei Shu, Gordon G. Wallace
Gordon Wallace
There has been an emerging interest in stretchable power sources compatible with flexible/wearable electronics. Such power sources must be able to withstand large mechanical strains and still maintain function. Here we report a highly stretchable H3PO4-poly(vinyl alcohol) (PVA) polymer electrolyte obtained by optimizing the polymer molecular weight and its weight ratio to H3PO4 in terms of conductivity and mechanical properties. The electrolyte demonstrates a high conductivity of 3.4 x 10-3 S cm-1, and a high fracture strain at 410% elongation. It is mechanically robust with a tensile strength of 2 MPa and a Young's modulus of 1 MPa, and displays …
Electrochemically Synthesized Stretchable Polypyrrole/Fabric Electrodes For Supercapacitor, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Electrochemically Synthesized Stretchable Polypyrrole/Fabric Electrodes For Supercapacitor, Binbin Yue, Caiyun Wang, Xin Ding, Gordon G. Wallace
Gordon Wallace
Wearable electronics offer the combined advantages of both electronics and fabrics. Being an indispensable part of these electronics, lightweight, stretchable and wearable power sources are strongly demanded. Here we describe a daily-used cotton fabric coated with polypyrrole as electrode for stretchable supercapacitors. Polypyrrole was synthesized on the Au coated fabric via an electrochemical polymerization process with p-toluenesulfonic acid (p-TS) as dopant from acetonitrile solution. This material was characterized with FESEM, tensile stress, and studied as a supercapacitor electrode in 1.0 M NaCl. This conductive textile electrode can sustain up to 140% strain without electric failure. It delivers a high specific …
Pegylation Of Platinum Bio-Electrodes, Zhilian Yue, Paul J. Molino, Xiao Liu, Gordon G. Wallace
Pegylation Of Platinum Bio-Electrodes, Zhilian Yue, Paul J. Molino, Xiao Liu, Gordon G. Wallace
Gordon Wallace
Controlling protein interactions at the implanted electrode interface is becoming an important strategy for the management of foreign body responses that have proven to be detrimental to the long-term performance of neural prosthesis. In this study, PEGylation was conducted on platinum bio-electrodes to render the surface protein-resistant. The PEGylated electrode was investigated using a quartz crystal microbalance-dissipation, electrochemical impedance spectroscopy and cyclic voltammetiy.
Conducting Polymer Coated Neural Recording Electrodes, Alexander R. Harris, Simon Morgan, Jun Chen, Robert M. Kapsa, Gordon G. Wallace, Antonio Paolini
Conducting Polymer Coated Neural Recording Electrodes, Alexander R. Harris, Simon Morgan, Jun Chen, Robert M. Kapsa, Gordon G. Wallace, Antonio Paolini
Gordon Wallace
Neural recording electrodes suffer from poor signal to noise ratio, charge density, biostability and biocompatibility. This paper investigates the ability of conducting polymer coated electrodes to record acute neural response in a systematic manner, allowing in depth comparison of electrochemical and electrophysiological response. Approach. Polypyrrole (Ppy) and poly-3,4-ethylenedioxythiophene (PEDOT) doped with sulphate (SO4) or para-toluene sulfonate (pTS) were used to coat iridium neural recording electrodes. Detailed electrochemical and electrophysiological investigations were undertaken to compare the effect of these materials on acute in vivo recording. Main results. A range of charge density and impedance responses were seen with each respectively doped …
Nanostructured Carbon Electrodes, Gordon G. Wallace, Jun Chen, Dan Li, Simon E. Moulton, Joselito M. Razal
Nanostructured Carbon Electrodes, Gordon G. Wallace, Jun Chen, Dan Li, Simon E. Moulton, Joselito M. Razal
Gordon Wallace
In its conducting form, carbon has proven to be a versatile, robust and high performing electrode material in areas such as energy conversion, energy storage and even medical bionics. In our laboratories we have been interested in the fabrication and utilization of nanostructured electrodes based on more recently discovered forms of carbon. These include carbon nanotubes and graphene.
Advanced Microwave-Assisted Production Of Hybrid Electrodes For Energy Applications, Peter Sherrell, Jun Chen, Joselito M. Razal, Ivan P. Nevirkovets, Carol Crean, Andrew I. Minett, Gordon G. Wallace
Advanced Microwave-Assisted Production Of Hybrid Electrodes For Energy Applications, Peter Sherrell, Jun Chen, Joselito M. Razal, Ivan P. Nevirkovets, Carol Crean, Andrew I. Minett, Gordon G. Wallace
Gordon Wallace
Carbon nanotubes are one of the most prominent materials in research for creating electrodes for portable electronics. When coupled with metallic nanoparticles the performance of carbon nanotube electrodes can be dramatically improved. Microwave reduction is an extremely rapid method for producing carbon nanotube-metallic nanoparticle composites, however this technique has so far been limitied to carbon nanotube soot. An understanding of the microwave process and the interactions of metallic nanoparticles with carbon nanotubes has allowed us to extend this promising functionalisation route to pre-formed CNT elelctrode architectures. Nanoparticle reduction onto pre-formed architectures reduces metallic nanoparticle waste as particles are not formed …
Flexible And Compressible Goretex-Pedot Membrane Electrodes For Solid-State Dye-Sensitized Solar Cells, Attila J. Mozer, Dillip K. Panda, Sanjeev Gambhir, Anthony C. Romeo, Bjorn Winther-Jensen, Gordon G. Wallace
Flexible And Compressible Goretex-Pedot Membrane Electrodes For Solid-State Dye-Sensitized Solar Cells, Attila J. Mozer, Dillip K. Panda, Sanjeev Gambhir, Anthony C. Romeo, Bjorn Winther-Jensen, Gordon G. Wallace
Gordon Wallace
A porous, flexible electrode based on a PTFE (Teflon) membrane (Goretex) coated with a metallic current collector and a conducting polymer (poly(3,4-ethylenedioxythiophene), PEDOT) has been developed for applications in solidstate dye-sensitized solar cells. Its low sheet resistance and compressibility make it an ideal electrode on uneven TiO2 surfaces with high efficiency and reproducibility. The porous nature of the electrode enables the feed-through of reactants and treatment agents, which opens up exciting opportunities to interface these photoelectrochemical devices with electrocatalytic, energy conversion, and storage systems. Postfabrication bonding of the photoanode and the Goretex-Au-PEDOT electrode is demonstrated.
Enhanced Performance Of Dye Sensitized Solar Cells Utilizing Platinum Electrodeposit Counter Electrodes, Attila J. Mozer, George Tsekouras, Gordon G. Wallace
Enhanced Performance Of Dye Sensitized Solar Cells Utilizing Platinum Electrodeposit Counter Electrodes, Attila J. Mozer, George Tsekouras, Gordon G. Wallace
Gordon Wallace
Enhanced performance was observed for dye-sensitized solar cells (DSSCs) utilizing counter electrodes based on Pt electrodeposits compared to counter electrodes based on sputtered Pt. Scanning electron microscopy of Pt electrodeposits revealed that the use of an initial cathodic overpotential pulse followed by steady electrodeposition at a mild cathodic potential yielded ∼40nm particles, compared to ∼600nm particles when no such pulse was used. Cyclic voltammetry and electrochemical impedance spectroscopy (EIS) of electrode materials suggested that Pt electrodeposits would give enhanced performance as DSSC counter electrodes compared to sputtered Pt, and this was confirmed by device testing. EIS characterization of DSSCs under …
Towards Novel Entangled Carbon Nanotube Composite Electrodes, Gordon G. Wallace, P. Sherrell, J. Chen, A. Minett
Towards Novel Entangled Carbon Nanotube Composite Electrodes, Gordon G. Wallace, P. Sherrell, J. Chen, A. Minett
Gordon Wallace
The commercialization of carbon nanotube electrodes is impeded by the lack of bulk processing techniques. One approach to overcome this impediment is the growth of macroscopic CNT composite architectures which do not require any extra processing. Unfortunately the fundamental growth mechanisms of these carbon composites is not currently understood. To probe this mechanism a systematic examination of the effect of certain growth parameters was undertaken. Within this paper we present the promising preliminary findings of this study revealing extremely complex relationships between variables during growth. We also present the performance of the produced architectures as capacitor electrodes and the further …