Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics Commons™

Open Access. Powered by Scholars. Published by Universities.®

2015

PDF

Physics

Air Force Institute of Technology

Articles 1 - 16 of 16

Full-Text Articles in Physical Sciences and Mathematics

Comparison Of Microfacet Brdf Model To Modified Beckmann-Kirchhoff Brdf Model For Rough And Smooth Surfaces, Samuel D. Butler, Stephen E. Nauyoks, Michael A. Marciniak Nov 2015

Comparison Of Microfacet Brdf Model To Modified Beckmann-Kirchhoff Brdf Model For Rough And Smooth Surfaces, Samuel D. Butler, Stephen E. Nauyoks, Michael A. Marciniak

Faculty Publications

A popular class of BRDF models is the microfacet models, where geometric optics is assumed. In contrast, more complex physical optics models may more accurately predict the BRDF, but the calculation is more resource intensive. These seemingly disparate approaches are compared in detail for the rough and smooth surface approximations of the modified Beckmann-Kirchhoff BRDF model, assuming Gaussian surface statistics. An approximation relating standard Fresnel reflection with the semi-rough surface polarization term, Q, is presented for unpolarized light. For rough surfaces, the angular dependence of direction cosine space is shown to be identical to the angular dependence in the microfacet …

Go to article

New Transitions And Feeding Of The JΠ=(8+) Isomer In 186Re, David A. Matters, Nikolaos Fotiades, James J. Carroll, Christopher J. Chiara, John W. Mcclory, Toshihiko Kawano, Ronald O. Nelson, Matthew Devlin Nov 2015

New Transitions And Feeding Of The JΠ=(8+) Isomer In 186Re, David A. Matters, Nikolaos Fotiades, James J. Carroll, Christopher J. Chiara, John W. Mcclory, Toshihiko Kawano, Ronald O. Nelson, Matthew Devlin

Faculty Publications

The spallation neutron source at the Los Alamos Neutron Science Center Weapons Neutron Research facility was used to populate excited states in 186Re via (n,2nγ) reactions on an enriched 187Re target. Gamma rays were detected with the GErmanium Array for Neutron Induced Excitations spectrometer, a Compton-suppressed array of 18 HPGe detectors. Incident neutron energies were determined by the time-of-flight technique and used to obtain γ-ray excitation functions for the purpose of identifying γ rays by reaction channel. Analysis of the singles γ-ray spectrum gated on the neutron energy range 10≤En≤25MeV resulted in five transitions and one …

Go to article

Oxygen Vacancies In Lialo2 Crystals, Maurio S. Holston, I. P. Ferguson, John W. Mcclory, Nancy C. Giles, Larry E. Halliburton Oct 2015

Oxygen Vacancies In Lialo2 Crystals, Maurio S. Holston, I. P. Ferguson, John W. Mcclory, Nancy C. Giles, Larry E. Halliburton

Faculty Publications

Singly ionized oxygen vacancies are produced in LiAlO2 crystals by direct displacement events during a neutron irradiation. These vacancies, with one trapped electron, are referred to as V+O centers. They are identified and characterized using electron paramagnetic resonance (EPR) and optical absorption. The EPR spectrum from the V+O centers is best monitored near 100 K with low microwave power. When the magnetic field is along the [001] direction, this spectrum has a g value of 2.0030 and well-resolved hyperfine interactions of 310 and 240 MHz with the two 27Al nuclei that are adjacent to the oxygen vacancy. A second …

Go to article

Temperature Dependent Rubidium-Helium Line Shapes And Fine Structure Mixing Rates, Wooddy S. Miller Sep 2015

Temperature Dependent Rubidium-Helium Line Shapes And Fine Structure Mixing Rates, Wooddy S. Miller

Theses and Dissertations

Diode Pumped Alkali Lasers (DPALs) are a new type of laser that uses alkali metal vapor as a gain medium and a buffer gas to control the line shape and kinetics. While these systems were first demonstrated in 2003 [48] they have just recently been scaled to the kilowatt power levels in 2012 [18]. To achieve these powers, the design of the gain cell relied on a set of incomplete line shape and kinetic data. The current focus areas of DPAL research are the continued power scaling of the systems and basic science research into the rates involved within the …

Go to article

Experimental And Theoretical Basis For A Closed-Form Spectral Brdf Model, Samuel D. Butler Sep 2015

Experimental And Theoretical Basis For A Closed-Form Spectral Brdf Model, Samuel D. Butler

Theses and Dissertations

The microfacet class of BRDF models is frequently used to calculate optical scatter from realistic surfaces using geometric optics, but has the disadvantage of not being able to consider wavelength dependence. This dissertation works toward development of a closed-form approximation to the BRDF that is suitable for hyperspectral remote sensing by presenting measured BRDF data of 12 different materials at four different incident angles and up to seven different wavelengths between 3.39 and 10.6 micrometer. The data was intended to be fit to various microfacet BRDF models to determine an appropriate form of the wavelength scaling. However, when fitting the …

Go to article

Experimentally Generating Any Desired Partially Coherent Schell-Model Source Using Phase-Only Control, Milo W. Hyde Iv, Santasri Basu, David G. Voelz, Xifeng Xiao Sep 2015

Experimentally Generating Any Desired Partially Coherent Schell-Model Source Using Phase-Only Control, Milo W. Hyde Iv, Santasri Basu, David G. Voelz, Xifeng Xiao

Faculty Publications

A technique is presented to produce any desired partially coherent Schell-model source using a single phase-only liquid-crystal spatial light modulator (SLM). Existing methods use SLMs in combination with amplitude filters to manipulate the phase and amplitude of an initially coherent source. The technique presented here controls both the phase and amplitude using a single SLM, thereby making the amplitude filters unnecessary. This simplifies the optical setup and significantly increases the utility and flexibility of the resulting system. The analytical development of the technique is presented and discussed. To validate the proposed approach, experimental results of three partially coherent Schell-model sources …

Go to article

Improved Terahertz Modulation Using Germanium Telluride (Gete) Chalcogenide Thin Films, Alexander H. Gwin, Christopher H. Kodama, Tod V. Laurvick, Ronald Coutu Jr., Philip F. Taday Jul 2015

Improved Terahertz Modulation Using Germanium Telluride (Gete) Chalcogenide Thin Films, Alexander H. Gwin, Christopher H. Kodama, Tod V. Laurvick, Ronald Coutu Jr., Philip F. Taday

Faculty Publications

We demonstrate improved terahertz (THz) modulation using thermally crystallized germanium telluride (GeTe) thin films. GeTe is a chalcogenide material that exhibits a nonvolatile, amorphous to crystalline phase change at approximately 200 °C, as well as six orders of magnitude decreased electrical resistivity. In this study, amorphous GeTe thin films were sputtered on sapphire substrates and then tested using THz time-domain spectroscopy (THz-TDS). The test samples, heated in-situ while collecting THz-TDS measurements, exhibited a gradual absorbance increase, an abrupt nonvolatile reduction at the transition temperature, followed by another gradual increase in absorbance. The transition temperature was verified by conducting similar thermal …

Go to article

Identifying The Experimental And Theoretical Effective Characteristics Of Nonaligned Anisotropic Metamaterials, Michael R. Benson Jun 2015

Identifying The Experimental And Theoretical Effective Characteristics Of Nonaligned Anisotropic Metamaterials, Michael R. Benson

Theses and Dissertations

Previous research into anisotropic materials has assumed certain properties in order to make the underlying mathematics tractable. One of the assumptions is the alignment of the optical axes with the laboratory frame of reference, such as split-ring resonators lying at on the material plane. This assumption does not hold true for many metamaterials, such as tilted nanorods. Techniques such as ellipsometry are needed to analyze the effective characteristics of these highly anisotropic structures. In this research, tilted nanorods are analyzed using generalized ellipsometry to extract the indices of the optical axes. The underlying physics of ellipsometry is then used to …

Go to article

Coupling Nuclear Induced Phonon Propagation With Conversion Electron Mössbauer Spectroscopy, Michael J. Parker Jun 2015

Coupling Nuclear Induced Phonon Propagation With Conversion Electron Mössbauer Spectroscopy, Michael J. Parker

Theses and Dissertations

Mössbauer spectroscopy is a very sensitive measurement technique (10-8 eV) which prompted motivation for the experiment described in this thesis. Namely, can a sensitive detection system be developed to detect nuclear recoils on the order of 10 to 100 of eVs? The hypothesis that this thesis tests is: Nuclear induced phonon bursts caused by Rutherford scattered alphas, decayed from 241Am, in a type-310 stainless steel material can couple with 7.3 keV conversion electron Mössbauer events at the other end of the material which will have a statistically significant effect on a Mössbauer spectrum. The phonon bursts produced by …

Go to article

Interstitial Silicon Ions In Rutile Tio2 Crystals, Eric M. Golden, Nancy C. Giles, Shan Yang, Larry E. Halliburton Apr 2015

Interstitial Silicon Ions In Rutile Tio2 Crystals, Eric M. Golden, Nancy C. Giles, Shan Yang, Larry E. Halliburton

Faculty Publications

Electron paramagnetic resonance (EPR) is used to identify a new and unique photoactive silicon-related point defect in single crystals of rutile TiO2. The importance of this defect lies in its assignment to interstitial silicon ions and the unexpected establishment of silicon impurities as a major hole trap in TiO2. Principal g values of this new S=1/2 center are 1.9159, 1.9377, and 1.9668 with principal axes along the [¯110],[001], and [110] directions, respectively. Hyperfine structure in the EPR spectrum shows the unpaired spin interacting equally with two Ti nuclei and unequally with two Si nuclei. These silicon …

Go to article

Scaling Of An Optically Pumped Mid-Infrared Rubidium Laser, Paul J. Moran Mar 2015

Scaling Of An Optically Pumped Mid-Infrared Rubidium Laser, Paul J. Moran

Theses and Dissertations

An optically pumped mid-infrared rubidium (Rb) pulsed laser has been demonstrated in a heat pipe along the 62P3/2 - 62S1/2 transition at 2.730 µm and the 62P1/2 - 62S1/2 transition at 2.790 µm. The bleached limit, slope efficiency, and maximum laser output energy of the mid-IR Rb laser have been shown to scale linearly with increasing Rb density, contrary to prior laser demonstrations. A maximum output energy of 5 nJ per pulse had previously been observed before a rollover occurred in the scaling of output energy with Rb …

Go to article

Absorption Spectroscopy Of Rubidium In An Alkali Metal Dispenser Cell And Bleached Wave Analysis, James M. Rosenthal Mar 2015

Absorption Spectroscopy Of Rubidium In An Alkali Metal Dispenser Cell And Bleached Wave Analysis, James M. Rosenthal

Theses and Dissertations

An absorption spectrum of a rubidium alkali metal dispenser (AMD) cell was obtained in order to determine the system s suitability for use in a diode pumped alkali laser (DPAL) and use in high-temperature spectroscopic studies. The AMD produced a concentration of 3.65 0.16 1010 cm-3, which is in the ideal range for Beer s Law region absorption spectroscopy, but too low to make a high-power DPAL in a 10 cm cell with a poor Q resonator. Before AMDs can be used to determine pressure broadening and shifting coefficients, issues concerning contamination and producing rubidium vapor at pressure must be …

Go to article

Photon Sieve Bandwidth Broadening By Reduction Of Chromatic Aberration Effects Using Second-Stage Diffractive Optics, Christopher M. Tulip Mar 2015

Photon Sieve Bandwidth Broadening By Reduction Of Chromatic Aberration Effects Using Second-Stage Diffractive Optics, Christopher M. Tulip

Theses and Dissertations

A photon sieve is a lightweight diffractive optic which can be useful for space-based imaging applications. It is limited by chromatic aberration and a narrow bandwidth. A Fresnel zone plate is used to counteract this effect in a manner similar to that accomplished with a traditional holographic corrector. First, a radiometric analysis established a target for bandwidth improvement. Next, a sieve was designed, fabricated, and characterized. Third, the bandwidth-broadening correction scheme was developed to correct primary chromatic aberration. Finally, a zone plate was designed, fabricated, and tested. Performance of the corrected system was measured over the target bandwidth. The corrected …

Go to article

Theoretical Investigation Of Stabilities And Optical Properties Of Si12C12 Clusters, Xiaofeng F. Duan, Larry W. Burggraf Jan 2015

Theoretical Investigation Of Stabilities And Optical Properties Of Si12C12 Clusters, Xiaofeng F. Duan, Larry W. Burggraf

Faculty Publications

By sorting through hundreds of globally stable Si12C12 isomers using a potential surface search and using simulated annealing, we have identified low-energy structures. Unlike isomers knit together by Si–C bonds, the lowest energy isomers have segregated carbon and silicon regions that maximize stronger C–C bonding. Positing that charge separation between the carbon and silicon regions would produce interesting optical absorption in these cluster molecules, we used time-dependent density functional theory to compare the calculated optical properties of four isomers representing structural classes having different types of silicon and carbon segregation regions. Absorptions involving charge transfer between segregated …

Go to article

Reconfigurable Solid-State Dye-Doped Polymer Ring Resonator Lasers, Hengky Chandrahalim, Xudong Fan Jan 2015

Reconfigurable Solid-State Dye-Doped Polymer Ring Resonator Lasers, Hengky Chandrahalim, Xudong Fan

Faculty Publications

This paper presents wavelength configurable on-chip solid-state ring lasers fabricated by a single-mask standard lithography. The single- and coupled-ring resonator hosts were fabricated on a fused-silica wafer and filled with 3,3′-Diethyloxacarbocyanine iodide (CY3), Rhodamine 6G (R6G) and 3,3′-Diethylthiadicarbocyanine iodide (CY5)-doped polymer as the reconfigurable gain media. The recorded lasing threshold was ~220 nJ/mm2 per pulse for the single-ring resonator laser with R6G, marking the lowest threshold shown by solid-state dye-doped polymer lasers fabricated with a standard lithography process on a chip. A single-mode lasing from a coupled-ring resonator system with the lasing threshold of ~360 nJ/mm2 per pulse …

Go to article

Monolithic Optofluidic Ring Resonator Lasers Created By Femtosecond Laser Nanofabrication, Hengky Chandrahalim, Qiushu Chen, Ali A. Said, Mark Dugan, Xudong Fan Jan 2015

Monolithic Optofluidic Ring Resonator Lasers Created By Femtosecond Laser Nanofabrication, Hengky Chandrahalim, Qiushu Chen, Ali A. Said, Mark Dugan, Xudong Fan

Faculty Publications

We designed, fabricated, and characterized a monolithically integrated optofluidic ring resonator laser that is mechanically, thermally, and chemically robust. The entire device, including the ring resonator channel and sample delivery microfluidics, was created in a block of fused-silica glass using a 3-dimensional femtosecond laser writing process. The gain medium, composed of Rhodamine 6G (R6G) dissolved in quinoline, was flowed through the ring resonator. Lasing was achieved at a pump threshold of approximately 15 μJ/mm2. Detailed analysis shows that the Q-factor of the optofluidic ring resonator is 3.3 × 104, which is limited by both solvent …

Go to article