Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 8 of 8
Full-Text Articles in Physical Sciences and Mathematics
Mesoporous Hierarchical Anatase For Dye-Sensitized Solar Cells Achieving Over 10% Conversion Efficiency, Jianjian Lin, Yoon-Uk Heo, Andrew Nattestad, Yusuke Yamauchi, S X. Dou, Jung Ho Kim
Mesoporous Hierarchical Anatase For Dye-Sensitized Solar Cells Achieving Over 10% Conversion Efficiency, Jianjian Lin, Yoon-Uk Heo, Andrew Nattestad, Yusuke Yamauchi, S X. Dou, Jung Ho Kim
Australian Institute for Innovative Materials - Papers
Interest in both one-dimensional and hierarchical architectures of metal oxide semiconductors has intensified within the field of materials science over recent years. Herein, a new mesoporous anatase TiO2 architecture that combines these two concepts, as it is composed of individual, high-aspect-ratio, nanoribbon-like components, was synthesized via a facile hydrothermal method without any surfactant or template. An 8.3% solar-to-electric conversion efficiency was obtained when these structures were used in photoanodes for dye-sensitized solar cells, which are superior to commercial state-of-the-art TiO2 (6.6%), due to enhanced dye loading and efficient light scattering. To further improve the light scattering effect, a …
Boosting The Efficiency Of Quantum Dot Sensitized Solar Cells Up To 7.11% Through Simultaneous Engineering Of Photocathode And Photoanode, Yang Bai, Chao Han, Xinqi Chen, Hua Yu, Xu Zong, Zhen Li, Lianzhou Wang
Boosting The Efficiency Of Quantum Dot Sensitized Solar Cells Up To 7.11% Through Simultaneous Engineering Of Photocathode And Photoanode, Yang Bai, Chao Han, Xinqi Chen, Hua Yu, Xu Zong, Zhen Li, Lianzhou Wang
Australian Institute for Innovative Materials - Papers
We demonstrate a new strategy of boosting the efficiency of quantum dot sensitized solar cells (QDSSCs) by engineering the photocathode and photoanode simultaneously. Nanostructured photocathodes based on non-stoichiometric Cu2-xSe electrocatalysts were developed via a simple and scalable approach for CdS/CdSe QDs co-sensitized solar cells. Compared to Cu2S CE, remarkably improved photovoltaic performance was achieved for QDSSCs with Cu2-xSe CEs. The superior catalytic activity and electrical conductivity of Cu2-xSe CEs were verified by the electrochemical impedance spectra and Tafel-polarization measurements. To maximize the efficiency enhancement, the photoanodes were optimized by introducing a pillared …
A Bi-Layer Tio2 Photoanode For Highly Durable, Flexible Dye-Sensitized Solar Cells, Jianjian Lin, Yong Peng, Alexander Pascoe, Fuzhi Huang, Yi-Bing Cheng, Yoon-Uk Heo, Andrew Nattestad, Wanchul Seung, Sung Kyun Kim, Hoon Joon Yoon, Sang Woo Kim, Yusuke Yamauchi, S X. Dou, Jung Ho Kim
A Bi-Layer Tio2 Photoanode For Highly Durable, Flexible Dye-Sensitized Solar Cells, Jianjian Lin, Yong Peng, Alexander Pascoe, Fuzhi Huang, Yi-Bing Cheng, Yoon-Uk Heo, Andrew Nattestad, Wanchul Seung, Sung Kyun Kim, Hoon Joon Yoon, Sang Woo Kim, Yusuke Yamauchi, S X. Dou, Jung Ho Kim
Australian Institute for Innovative Materials - Papers
Low-temperature processing of dye-sensitized solar cells (DSCs) [B. Oregan, M. Grätzel, Nature, 1991, 353, 737] is crucial to enable their commercialization with low-cost plastic substrates. Much of the previous work in this area has focused on mechanical compression of premade particles on plastic substrates; however, many reported that this technique did not yield sufficient interconnections for high charge carrier transport. Herein, we present bi-layer photoanodes that incorporate microstructured TiO2 sea-urchin-like assemblies, composed of high-aspect-ratio single crystalline nanoribbons, i.e., two-dimensional subunits, which were deposited onto a nanoparticle layer (commercial P25), with a 5.6% conversion efficiency realized. We demonstrate that …
A Versatile Binder-Free Tio2 Paste For Dye-Sensitized Solar Cells, Jeremy H. Yune, Inna Karatchevtseva, P Evans, Klaudia K. Wagner, Matthew J. Griffith, David L. Officer, Gerry Triani
A Versatile Binder-Free Tio2 Paste For Dye-Sensitized Solar Cells, Jeremy H. Yune, Inna Karatchevtseva, P Evans, Klaudia K. Wagner, Matthew J. Griffith, David L. Officer, Gerry Triani
Australian Institute for Innovative Materials - Papers
In this study, binder-free TiO2 colloidal pastes have been prepared using a variety of heterocyclic bases with diverse characteristics to produce robust photoanodes for dye-sensitized solar cells (DSSC) from a single cast film thickness of 5 micron. The influence of the base on the electrode structure and film morphology, including its electron donor characteristics are investigated after low temperature thermal treatment and high temperature sintering. The results show that quinoline in the TiO2 paste is retained within the electrode structure in comparison to piperidine and pyridine after a short thermal treatment of 150 °C for 15 minutes. The …
Enhanced Electron Lifetime Of Cdse/Cds Quantum Dot (Qd) Sensitized Solar Cells Using Znse Core-Shell Structure With Efficient Regeneration Of Quantum Dots, Rasin K. Ahmed, Long Zhao, Attila J. Mozer, Geoffrey D. Will, John M. Bell, Hongxia Wang
Enhanced Electron Lifetime Of Cdse/Cds Quantum Dot (Qd) Sensitized Solar Cells Using Znse Core-Shell Structure With Efficient Regeneration Of Quantum Dots, Rasin K. Ahmed, Long Zhao, Attila J. Mozer, Geoffrey D. Will, John M. Bell, Hongxia Wang
Australian Institute for Innovative Materials - Papers
Research on development of efficient passivation materials for high performance and stable quantum dot sensitized solar cells (QDSCs) is highly important. While ZnS is one of the most widely used passivation material in QDSCs, an alternative material based on ZnSe which was deposited on CdS/CdSe/TiO2 photoanode to form a semi-core/shell structure has been found to be more efficient in terms of reducing electron recombination in QDSCs in this work. It has been found that the solar cell efficiency was improved from 1.86% for ZnSe0 (without coating) to 3.99% using 2 layers of ZnSe coating (ZnSe2) deposited by successive ionic …
A Decaheme Cytochrome As A Molecular Electron Conduit In Dye-Sensitized Photoanodes, Ee Taek Hwang, Khizar Sheikh, Katherine L. Orchard, Daisuke Hojo, Valentin Radu, Chong-Yong Lee, Emma Ainsworth, Colin Lockwood, Manuela A. Gross, Tadafumi Adschiri, Erwin Reisner, Julea N. Butt, Lars J. C Jeuken
A Decaheme Cytochrome As A Molecular Electron Conduit In Dye-Sensitized Photoanodes, Ee Taek Hwang, Khizar Sheikh, Katherine L. Orchard, Daisuke Hojo, Valentin Radu, Chong-Yong Lee, Emma Ainsworth, Colin Lockwood, Manuela A. Gross, Tadafumi Adschiri, Erwin Reisner, Julea N. Butt, Lars J. C Jeuken
Australian Institute for Innovative Materials - Papers
In nature, charge recombination in light-harvesting reaction centers is minimized by efficient charge separation. Here, it is aimed to mimic this by coupling dye-sensitized TiO2 nanocrystals to a decaheme protein, MtrC from Shewanella oneidensis MR-1, where the 10 hemes of MtrC form a ≈7-nm-long molecular wire between the TiO2 and the underlying electrode. The system is assembled by forming a densely packed MtrC film on an ultra-flat gold electrode, followed by the adsorption of approximately 7 nm TiO2 nanocrystals that are modified with a phosphonated bipyridine Ru(II) dye (RuP). The step-by-step construction of the MtrC/TiO2 system is monitored with (photo)electrochemistry, …
N719- And D149-Sensitized 3d Hierarchical Rutile Tio2 Solar Cells - A Comparative Study, Jianjian Lin, Yoon-Uk Heo, Andrew Nattestad, Mohammed Shahabuddin, Yusuke Yamauchi, Jung Ho Kim
N719- And D149-Sensitized 3d Hierarchical Rutile Tio2 Solar Cells - A Comparative Study, Jianjian Lin, Yoon-Uk Heo, Andrew Nattestad, Mohammed Shahabuddin, Yusuke Yamauchi, Jung Ho Kim
Australian Institute for Innovative Materials - Papers
Poor dye loading on rutile TiO2 is one of the chief reasons for lower solar-to-electric conversion efficiency (η) in dye-sensitized solar cells (DSCs), compared to their anatase based counterparts. Previously, we showed that similar light harvesting for both rutile and anatase was realized by using a metal-free organic indoline dye, D149 [Sci. Rep., 2014, 4, 5769]. This was in contrast to the bulk of previous studies, which employed ruthenium based N719, leading to significant differences in light harvesting. To date, there has been no report directly comparing N719 and D149 for rutile based DSCs. In this work, three-dimensional hierarchical …
Enhanced Electron Lifetimes In Dye-Sensitized Solar Cells Using A Di-Chromophoric Porphyrin: The Utility Of Inter-Molecular Forces, Long Zhao, Pawel W. Wagner, Holly Van Der Salm, Keith C. Gordon, Shogo Mori, Attila J. Mozer
Enhanced Electron Lifetimes In Dye-Sensitized Solar Cells Using A Di-Chromophoric Porphyrin: The Utility Of Inter-Molecular Forces, Long Zhao, Pawel W. Wagner, Holly Van Der Salm, Keith C. Gordon, Shogo Mori, Attila J. Mozer
Australian Institute for Innovative Materials - Papers
Electron lifetimes in dye-sensitized solar cells employing a porphyrin dye, an organic dye, a 1:1 mixture of the two dyes and a di-chromophoric dye design consisting of the two dyes using a non-conjugated linker were measured, suggesting that the dispersion force of the organic dyes has a significant detrimental effect on the electron lifetime and that the di-chromophoric design can be utilized to control the effect of the dispersion force.