Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 23 of 23
Full-Text Articles in Physical Sciences and Mathematics
Sulfur-Graphene Nanostructured Cathodes Via Ball-Milling For High-Performance Lithium-Sulfur Batteries, Jiantie Xu, Jianglan Shui, Jianli Wang, Min Wang, Hua-Kun Liu, S X. Dou, In-Yup Jeon, Jeong-Min Seo, Jong-Beom Baek, Liming Dai
Sulfur-Graphene Nanostructured Cathodes Via Ball-Milling For High-Performance Lithium-Sulfur Batteries, Jiantie Xu, Jianglan Shui, Jianli Wang, Min Wang, Hua-Kun Liu, S X. Dou, In-Yup Jeon, Jeong-Min Seo, Jong-Beom Baek, Liming Dai
Australian Institute for Innovative Materials - Papers
Although much progress has been made to develop high-performance lithium-sulfur batteries (LSBs), the reported physical or chemical routes to sulfur cathode materials are often multistep/complex and even involve environmentally hazardous reagents, and hence are infeasible for mass production. Here, we report a simple ball-milling technique to combine both the physical and chemical routes into a one-step process for low-cost, scalable, and eco-friendly production of graphene nanoplatelets (GnPs) edge-functionalized with sulfur (S-GnPs) as highly efficient LSB cathode materials of practical significance. LSBs based on the S-GnP cathode materials, produced by ball-milling 70 wt % sulfur and 30 wt % graphite, delivered …
Α-Fe2o3/Graphene Nanocomposite As Anode Material For Sodium-Ion Batteries With Enhanced Capacity Retention, Zhijia Zhang, Yunxiao Wang, Shulei Chou, Huijun Li, Hua-Kun Liu, Jiazhao Wang
Α-Fe2o3/Graphene Nanocomposite As Anode Material For Sodium-Ion Batteries With Enhanced Capacity Retention, Zhijia Zhang, Yunxiao Wang, Shulei Chou, Huijun Li, Hua-Kun Liu, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
Among the different energy storage systems, rechargeable lithium-ion batteries (LIBs) have been widely applied in various portable electronic devices due to their high energy densities, long cycle life, and lack of significant memory effect [1]. For wide-scale implementation of renewable energy, LIBs, however, face challenges related to their safety, lifetime, and cost. Based on the wide availability and low cost of sodium, sodium-ion batteries (SIBs) have the potential for meeting the demands of large-scale and sustainable applications. Many cathode materials have been proposed, whereas only a few anode materials have been investigated for SIBs [2]. The sodium ion (1.02 Å) …
Liquid Crystalline Graphene Oxide/Pedot: Pss Self-Assembled 3d Architecture For Binder-Free Supercapacitor Electrodes, Md. Monirul Islam, Alfred T. Chidembo, Seyed Hamed Aboutalebi, Dean Cardillo, Hua-Kun Liu, Konstantin K. Konstantinov, S X. Dou
Liquid Crystalline Graphene Oxide/Pedot: Pss Self-Assembled 3d Architecture For Binder-Free Supercapacitor Electrodes, Md. Monirul Islam, Alfred T. Chidembo, Seyed Hamed Aboutalebi, Dean Cardillo, Hua-Kun Liu, Konstantin K. Konstantinov, S X. Dou
Australian Institute for Innovative Materials - Papers
Binder-free self-assembled 3D architecture electrodes have been fabricated by a novel convenient method. Liquid crystalline graphene oxide was used as precursor to interact with poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in dispersion in order to form a conductive polymer entrapped, self-assembled layer-by-layer structure. This advanced network containing PEDOT:PSS enabled us to ascribe the superior electrochemical properties of particular graphene sheets. This layer-by-layer self-assembled 3D architecture of best performing composite (reduced graphene oxide-PEDOT:PSS 25) showed excellent electrochemical performance of 434 F g−1 through chemical treatment. To highlight these advances, we further explored the practicality of the as-prepared electrode by varying the composite material content. …
Microwave Autoclave Synthesized Multi-Layer Graphene/Single-Walled Carbon Nanotube Composites For Free-Standing Lithium-Ion Battery Anodes, Chao Zhong, Jia-Zhao Wang, David Wexler, Hua-Kun Liu
Microwave Autoclave Synthesized Multi-Layer Graphene/Single-Walled Carbon Nanotube Composites For Free-Standing Lithium-Ion Battery Anodes, Chao Zhong, Jia-Zhao Wang, David Wexler, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Multi-layer graphene sheets have been synthesized by a time-efficient microwave autoclave method and used to form composites in situ with single-walled carbon nanotubes. The application of these composites as flexible free-standing film electrodes was then investigated. According to the transmission electron microscopy and X-ray diffraction characterizations, the average d-spacing of the graphene-single-walled carbon nanotube composites was 0.41 nm, which was obviously larger than that of the as-prepared pure graphene (0.36 nm). The reversible Li-cycling properties of the free-standing films have been evaluated by galvanostatic discharge-charge cycling and electrochemical impedance spectroscopy. Results showed that the free-standing composite film with 70 wt% …
Formation And Processability Of Liquid Crystalline Dispersion Graphene Oxide, Rouhollah Jalili, Seyed Hamed Aboutalebi, Dorna Esrafilzadeh, Konstantin Konstantinov, Joselito M. Razal, Simon E. Moulton, Gordon G. Wallace
Formation And Processability Of Liquid Crystalline Dispersion Graphene Oxide, Rouhollah Jalili, Seyed Hamed Aboutalebi, Dorna Esrafilzadeh, Konstantin Konstantinov, Joselito M. Razal, Simon E. Moulton, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Rational control over the formation and processability, and consequently final properties of graphene oxide liquid crystalline dispersions has been a long-standing goal in the development of bottom-up device fabrication processes. Here we report, the principal conditions through which such levels of control can be exercised to fine-tune dispersion properties for further processing.
In Situ Engineering Of Urchin-Like Reduced Graphene Oxide-Mn 2o3-Mn3o4 Nanostructures For Supercapacitors, Alfred Tawirirana Chidembo, Seyed Hamed Aboutalebi, Konstantin Konstantinov, Charl Jeremy Jafta, Hua-Kun Liu, Kenneth Ikechukwu Ozoemena
In Situ Engineering Of Urchin-Like Reduced Graphene Oxide-Mn 2o3-Mn3o4 Nanostructures For Supercapacitors, Alfred Tawirirana Chidembo, Seyed Hamed Aboutalebi, Konstantin Konstantinov, Charl Jeremy Jafta, Hua-Kun Liu, Kenneth Ikechukwu Ozoemena
Australian Institute for Innovative Materials - Papers
We report the use of a spray pyrolysis method to synthesize high surface area (BET surface area of 139 m2 g-1) self-organized, micron sized urchin-like composites made up of reduced graphene oxide and needle-shaped manganese oxide (rGO-Mn2O3-Mn 3O4). Maximum capacitances of 425 Fg-1 at 5 mV s-1 from a three electrode set up and 133 Fg-1 at a current density of 0.2 Ag-1 were recorded using an asymmetric two electrode set up with graphene as the anode. The composite material also showed a capacitance retention of 83% over 1000 cycles. We attribute this remarkable performance to the high specific surface …
A Solvothermal Strategy: One-Step In Situ Synthesis Of Self-Assembled 3d Graphene-Based Composites With Enhanced Lithium Storage Capacity, Jingjing Ma, Jiulin Wang, Yu-Shi He, Xiao Zhen Liao, Jun Chen, Jiazhao Wang, Tao Yuan, Zi-Feng Ma
A Solvothermal Strategy: One-Step In Situ Synthesis Of Self-Assembled 3d Graphene-Based Composites With Enhanced Lithium Storage Capacity, Jingjing Ma, Jiulin Wang, Yu-Shi He, Xiao Zhen Liao, Jun Chen, Jiazhao Wang, Tao Yuan, Zi-Feng Ma
Australian Institute for Innovative Materials - Papers
A facile and controllable approach has been developed to synthesize three-dimensional (3D) graphene-based monoliths. Here, as a proof-of-concept experiment, self-assembled 3D CoO/graphene sheets (CoO/GS) composites with porous structures have been successfully fabricated in an ethanol medium by a one-step, in situ growth, solvothermal method. During the process, the in situ nucleation and growth of CoO particles on GS were tuned by the formation of a 3D GS network. In the as-prepared composites, the self-assembled 3D GS network around the CoO particles can not only provide a 3D conductive matrix, but also buffer the volume changes of CoO and restrain the …
High-Performance Sodium-Ion Batteries And Sodium-Ion Pseudocapacitors Based On Mos2/Graphene Composites, Yunxiao Wang, Shulei Chou, David Wexler, Hua-Kun Liu, S X. Dou
High-Performance Sodium-Ion Batteries And Sodium-Ion Pseudocapacitors Based On Mos2/Graphene Composites, Yunxiao Wang, Shulei Chou, David Wexler, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
Sodium-ion energy storage, including sodium-ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium-ion energy storage. It is an intriguing prospect, especially for large-scale applications, owing to its low cost and abundance. MoS2 sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS2/G) were constructed. The enlarged d-spacing, a contribution of the graphene matrix, and the …
Graphene Oxide Dispersions: Tuning Rheology To Enable Fabrication, Sina Naficy, Rouhollah Jalili, Seyed Hamed Aboutalebi, Robert A. Gorkin Iii, Konstantin Konstantinov, Peter C. Innis, Geoffrey M. Spinks, Philippe Poulin, Gordon G. Wallace
Graphene Oxide Dispersions: Tuning Rheology To Enable Fabrication, Sina Naficy, Rouhollah Jalili, Seyed Hamed Aboutalebi, Robert A. Gorkin Iii, Konstantin Konstantinov, Peter C. Innis, Geoffrey M. Spinks, Philippe Poulin, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Here, we show that graphene oxide (GO) dispersions exhibit unique viscoelastic properties, making them a new class of soft materials. The fundamental insights accrued here provide the basis for the development of fabrication protocols for these two-dimensional soft materials, in a diverse array of processing techniques.
Rapid Synthesis Of Li4ti5o12/Graphene Composite With Superior Rate Capability By A Microwave-Assisted Hydrothermal Method, Yi Shi, Jie Gao, Hector D. Abruna, Hua-Kun Liu, Huijun Li, Jiazhao Wang, Yuping Wu
Rapid Synthesis Of Li4ti5o12/Graphene Composite With Superior Rate Capability By A Microwave-Assisted Hydrothermal Method, Yi Shi, Jie Gao, Hector D. Abruna, Hua-Kun Liu, Huijun Li, Jiazhao Wang, Yuping Wu
Australian Institute for Innovative Materials - Papers
Li4Ti5O12 microspheres composed of nanoflakes wrapped in graphene nanosheets have been synthesized by an advanced microwave-hydrothermal (MW-HT) method for the preparation following by an annealing step. Microwave-assisted synthesis processes are appealing, as they can rapidly synthesize materials with a high degree of control of particle size and morphology at low cost. The resultant composite reveals a unique loose structure which could avoid the restacking of graphene sheets and offer rapid lithium ion diffusion paths. Therefore the Li4Ti5O12/graphene electrode has highly desirable properties: a specific capacity approaching the theoretical value, stable cycling, and exceptional rate capability. The composite also can be …
Highly Conductive Carbon Nanotube-Graphene Hybrid Yarn, Javad Foroughi, Geoffrey M. Spinks, Dennis Antiohos, Azadehsadat Mirabedini, Sanjeev Gambhir, Gordon G. Wallace, Shaban Reza Ghorbani, Germanas Peleckis, Mikhail Kozlov, Marcio Lima, Ray Baughman
Highly Conductive Carbon Nanotube-Graphene Hybrid Yarn, Javad Foroughi, Geoffrey M. Spinks, Dennis Antiohos, Azadehsadat Mirabedini, Sanjeev Gambhir, Gordon G. Wallace, Shaban Reza Ghorbani, Germanas Peleckis, Mikhail Kozlov, Marcio Lima, Ray Baughman
Australian Institute for Innovative Materials - Papers
An efficient procedure for the fabrication of highly conductive carbon nanotube/graphene hybrid yarns has been developed. To start, arrays of vertically aligned multi-walled carbon nanotubes (MWNT) are converted into indefinitely long MWNT sheets by drawing. Graphene flakes are then deposited onto the MWNT sheets by electrospinning to form a composite structure that is transformed into yarn filaments by twisting. The process is scalable for yarn fabrication on an industrial scale. Prepared materials are characterized by electron microscopy, electrical, mechanical, and electrochemical measurements. It is found that the electrical conductivity of the composite MWNT-graphene yarns is over 900 S/cm. This value …
One-Pot Synthesis Of Α-Fe2o3 Nanoparticles-Decorated Reduced Graphene Oxide For Efficient Nonenzymatic H2o2 Biosensor, Ming-Yan Wang, Tao Shen, Meng Wang, Dong-En Zhang, Zhi-Wei Tong, Jun Chen
One-Pot Synthesis Of Α-Fe2o3 Nanoparticles-Decorated Reduced Graphene Oxide For Efficient Nonenzymatic H2o2 Biosensor, Ming-Yan Wang, Tao Shen, Meng Wang, Dong-En Zhang, Zhi-Wei Tong, Jun Chen
Australian Institute for Innovative Materials - Papers
Hematite nanoparticles (α-Fe2O3) are successfully decorated on the reduced graphene oxide (rGO) sheets through a simple, one-step, hydrothermal method without addition of other reducing agents. The α-Fe2O3/rGO hybrid was characterized by scanning electron micrographs, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. This α-Fe2O3/rGO hybrid has been successfully applied in the catalytic performance toward the reduction of H2O2. The nonenzymatic sensor demonstrates a linear relationship over a wide concentration range of 5.0–4495.0 μM (R = 0.9998), a low detection limit of 1.0 μM, and a high sensitivity of 126.9 μA cm−2 mM−1 to the detection of H2O2.
Electrochemical Nonenzymatic Sensor Based On Coo Decorated Reduced Graphene Oxide For The Simultaneous Determination Of Carbofuran And Carbaryl In Fruits And Vegetables, Mingyan Wang, Junrao Huang, Meng Wang, Dongen Zhang, Jun Chen
Electrochemical Nonenzymatic Sensor Based On Coo Decorated Reduced Graphene Oxide For The Simultaneous Determination Of Carbofuran And Carbaryl In Fruits And Vegetables, Mingyan Wang, Junrao Huang, Meng Wang, Dongen Zhang, Jun Chen
Australian Institute for Innovative Materials - Papers
A novel nonenzymatic sensor based on cobalt (II) oxide (CoO)-decorated reduced graphene oxide (rGO) was developed for the detection of carbofuran (CBF) and carbaryl (CBR). Two well-defined and separate differential pulse voltammetric peaks for CBF and CBR were obtained with the CoO/rGO sensor in a mixed solution, making the simultaneous detection of both carbamate pesticides possible. The nonenzymatic sensor demonstrated a linear relationship over a wide concentration range of 0.2–70 μM (R = 0.9996) for CBF and 0.5–200 μM (R = 0.9995) for CBR. The lower detection limit of the sensor was 4.2 μg/L for CBF and 7.5 μg/L for …
Extrusion Printed Graphene/Polycaprolactone/ Composites For Tissue Engineering, Sepidar Sayyar, Rhys Cornock, Eoin Murray, Stephen Beirne, David L. Officer, Gordon G. Wallace
Extrusion Printed Graphene/Polycaprolactone/ Composites For Tissue Engineering, Sepidar Sayyar, Rhys Cornock, Eoin Murray, Stephen Beirne, David L. Officer, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
In this work fibres and complex three-dimensional scaffolds of a covalently linked graphene-polycaprolactone composite were successfully extruded and printed using a melt extrusion printing system. Fibres with varying diameters and morphologies, as well as complex scaffolds were fabricated using an additive fabrication approach and were characterized. It was found that the addition of graphene improves the mechanical properties of the fibres by over 50% and in vitro cytotoxicity tests showed good biocompatibility indicating a promising material for tissue engineering applications.
Graphene Can Pave The Way For Australian Manufacturing, David L. Officer, Gordon G. Wallace
Graphene Can Pave The Way For Australian Manufacturing, David L. Officer, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Australian industries have reached a turning point. With old industries on the way out, the Australian manufacturing sector's biggest challenge is to move from a low-cost mass production model to one that exploits niche markets and adds value to the global supply chain. Research-driven technological advances are an essential part of that process. By building upon the country's natural advantages, such as mineral and energy resources, this kind of progress can foster exciting, sustainable industries. The perfect example is graphene.
Performance Enhancement Of Single-Walled Nanotube-Microwave Exfoliated Graphene Oxide Composite Electrodes Using A Stacked Electrode Configuration, Dennis Antiohos, Mark S. Romano, Joselito M. Razal, Stephen Beirne, Phil Aitchison, Andrew I. Minett, Gordon G. Wallace, Jun Chen
Performance Enhancement Of Single-Walled Nanotube-Microwave Exfoliated Graphene Oxide Composite Electrodes Using A Stacked Electrode Configuration, Dennis Antiohos, Mark S. Romano, Joselito M. Razal, Stephen Beirne, Phil Aitchison, Andrew I. Minett, Gordon G. Wallace, Jun Chen
Australian Institute for Innovative Materials - Papers
We report the development of a stacked electrode supercapacitor cell using stainless steel meshes as the current collectors and optimised single walled nanotubes (SWNT)-microwave exfoliated graphene oxide (mw rGO) composites as the electrode material. The introduction of mw rGO into a SWNT matrix creates an intertwined porous structure that enhances the electroactive surface area and capacitive performance due to the 3-D hierarchical structure that is formed. The composite structure was optimised by varying the weight ratio of the SWNTs and mw rGO. The best performing ratio was the 90% SWNT-10% mw rGO electrode which achieved a specific capacitance of 306 …
Edge-Enriched Graphene Quantum Dots For Enhanced Photo-Luminescence And Supercapacitance, Mahbub Hassan, Enamul Haque, Kakarla Raghava Reddy, Andrew I. Minett, Jun Chen, Vincent G. Gomes
Edge-Enriched Graphene Quantum Dots For Enhanced Photo-Luminescence And Supercapacitance, Mahbub Hassan, Enamul Haque, Kakarla Raghava Reddy, Andrew I. Minett, Jun Chen, Vincent G. Gomes
Australian Institute for Innovative Materials - Papers
Graphene quantum dots (GQDs) with their edge-bound nanometer-size present distinctive properties owing to quantum confinement and edge effects. We report a facile ultrasonic approach with chemical activation using KOH to prepare activated GQDs or aGQDs enriched with both free and bound edges. Compared to GQDs, the aGQDs we synthesized had enhanced BET surface area by a factor of about six, the photoluminescence intensity by about four and half times and electro-capacitance by a factor of about two. Unlike their non-activated counterparts, the aGQDs having enhanced edge states emit enhanced intense blue luminescence and exhibit electrochemical double layer capacitance greater than …
Fabrication Of Free-Standing Hierarchical Carbon Nanofiber/Graphene Oxide/Polyaniline Films For Supercapacitors, Dongdong Xu, Qun Xu, Kaixi Wang, Jun Chen, Zhimin Chen
Fabrication Of Free-Standing Hierarchical Carbon Nanofiber/Graphene Oxide/Polyaniline Films For Supercapacitors, Dongdong Xu, Qun Xu, Kaixi Wang, Jun Chen, Zhimin Chen
Australian Institute for Innovative Materials - Papers
A hierarchical high-performance electrode with nanoacanthine-style polyaniline (PANI) deposited onto a carbon nanofiber/graphene oxide (CNF/GO) template was successfully prepared via an in situ polymerization process. The morphology analysis shows that introducing one-dimensional (1D) CNF could significantly decrease/inhibit the staking of laminated GO to form an open-porous CNF/GO architecture. Followed with in situ facial deposition of PANI, the as-synthesized PANI modified CNF/GO exhibits three-dimensional (3D) hierarchical layered nanoarchitecture, which favors the diffusion of the electrolyte ions into the inner region of active materials. The hierarchical free-standing electrodes were directly fabricated into sandwich structured supercapacitors using 1 M H2SO4 as the electrolyte …
Mechanically Strong High Performance Layered Polypyrrole Nano Fibre/Graphene Film For Flexible Solid State Supercapacitor, Sha Li, Chen Zhao, Kewei Shu, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
Mechanically Strong High Performance Layered Polypyrrole Nano Fibre/Graphene Film For Flexible Solid State Supercapacitor, Sha Li, Chen Zhao, Kewei Shu, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Paper like flexible electrode becomes one of the most important research objects recently in request of the fast expanding market of portable electronics. Flexible solid state supercapacitors are shortlisted as one of the most promising energy devices to power electronics with medium to high power density requirements. In this work, we developed a simple but effective way to produce a mechanically strong and electrochemically active RGO/polypyrrole (PPy) fibre paper. A well-bedded microstructure was created with interlaced polypyrrole fibres evenly distributed between the graphene layers. Such microstructure can create enormous amount of pores and therefore provides larger interfaces for charge carrier …
Electronic Coupling And Catalytic Effect On H2 Evolution Of Mos2/Graphene Nanocatalyst, Ting Liao, Ziqi Sun, Chenghua Sun, S X. Dou, Debra J. Searles
Electronic Coupling And Catalytic Effect On H2 Evolution Of Mos2/Graphene Nanocatalyst, Ting Liao, Ziqi Sun, Chenghua Sun, S X. Dou, Debra J. Searles
Australian Institute for Innovative Materials - Papers
Inorganic nano-graphene hybrid materials that are strongly coupled via chemical bonding usually present superior electrochemical performance. However, how the chemical bond forms and the synergistic catalytic mechanism remain fundamental questions. In this study, the chemical bonding of the MoS 2 nanolayer supported on vacancy mediated graphene and the hydrogen evolution reaction of this nanocatalyst system were investigated. An obvious reduction of the metallic state of the MoS 2 nanolayer is noticed as electrons are transferred to form a strong contact with the reduced graphene support. The missing metallic state associated with the unsaturated atoms at the peripheral sites in turn …
One-Step Synthesis Of Graphene/Polypyrrole Nanofiber Composites As Cathode Material For A Biocompatible Zinc/Polymer Battery, Sha Li, Kewei Shu, Chen Zhao, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
One-Step Synthesis Of Graphene/Polypyrrole Nanofiber Composites As Cathode Material For A Biocompatible Zinc/Polymer Battery, Sha Li, Kewei Shu, Chen Zhao, Caiyun Wang, Zaiping Guo, Gordon G. Wallace, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
The significance of developing implantable, biocompatible, miniature power sources operated in a low current range has become manifest in recent years to meet the demands of the fast-growing market for biomedical microdevices. In this work, we focus on developing high-performance cathode material for biocompatible zinc/polymer batteries utilizing biofluids as electrolyte. Conductive polymers and graphene are generally considered to be biocompatible and suitable for bioengineering applications. To harness the high electrical conductivity of graphene and the redox capability of polypyrrole (PPy), a polypyrrole fiber/graphene composite has been synthesized via a simple one-step route. This composite is highly conductive (141 S cm …
Fabrication Of Graphene Foam Supported Carbon Nanotube/Polyaniline Hybrids For High-Performance Supercapacitor Applications, Hongxia Yang, Nan Wang, Qun Xu, Zhimin Chen, Yumei Ren, Joselito M. Razal, Jun Chen
Fabrication Of Graphene Foam Supported Carbon Nanotube/Polyaniline Hybrids For High-Performance Supercapacitor Applications, Hongxia Yang, Nan Wang, Qun Xu, Zhimin Chen, Yumei Ren, Joselito M. Razal, Jun Chen
Australian Institute for Innovative Materials - Papers
A large-scale, high-powered energy storage system is crucial for addressing the energy problem. The development of high-performance materials is a key issue in realizing the grid-scale applications of energy-storage devices. In this work, we describe a simple and scalable method for fabricating hybrids (graphenepyrrole/ carbon nanotube-polyaniline (GPCP)) using graphene foam as the supporting template. Graphene-pyrrole (G-Py) aerogels are prepared via a green hydrothermal route from two-dimensional materials such as graphene sheets, while a carbon nanotube/polyaniline (CNT/PANI) composite dispersion is obtained via the in situ polymerization method. The functional nanohybrid materials of GPCP can be assembled by simply dipping the prepared …
Graphene-Based Nanocomposites For Energy Storage And Conversion In Lithium Batteries, Supercapacitors And Fuel Cells, Nasir Mahmood, Chenzhen Zhang, Han Yin, Yanglong Hou
Graphene-Based Nanocomposites For Energy Storage And Conversion In Lithium Batteries, Supercapacitors And Fuel Cells, Nasir Mahmood, Chenzhen Zhang, Han Yin, Yanglong Hou
Australian Institute for Innovative Materials - Papers
Due to their unique properties, together with their ease of synthesis and functionalization, graphene-based materials have been showing great potential in energy storage and conversion. These hybrid structures display excellent material characteristics, including high carrier mobility, faster recombination rate and long-time stability. In this review, after a short introduction to graphene and its derivatives, we summarize the recent advances in the synthesis and applications of graphene and its derivatives in the fields of energy storage (lithium ion, lithium-air, lithium-sulphur batteries and supercapacitors) and conversion (oxygen reduction reaction for fuel cells). This article further highlights the working principles and problems hindering …