Physical Sciences and Mathematics Commons^™

Understanding Of Processing Additives Influence In Tin Halide Perovskites: Chemistry, Defect, And Photovoltaic Performance, Syed Rahmath Ullah Joy

Theses and Dissertations--Chemistry

Metal halide perovskite semiconductors have attracted much interest for various applications, such as solar cells, light emitting diodes, photodetectors, and lasers, due to their excellent optoelectronic properties. Photovoltaic cell development is centered on Pb-based perovskites, which have equal photovoltaic performance compared to the traditional silicon photovoltaic. But concerns arising from the usage of toxic lead metal have motivated the research community to seek an alternative derivative. Among those, tin halide perovskites show much promise as an alternative to Pb-counterparts due to their ideal bandgap for single junction photovoltaics and similar optoelectronic properties to Pb perovskites. Nevertheless, tin perovskites suffer from …

Translating Chemistry, Structure, And Processing To The Solid-State Morphology And Function Of Organic Semiconductors Through Computational Modeling And Simulations, Chamikara D. Karunasena

Theses and Dissertations--Chemistry

The immense synthetic design space and material versatility have driven the exploration and development of organic semiconductors (OSC) over several decades. While many OSC designs focus on the chemistries of the molecular or polymer building blocks, a priori, multiscale control over the solid-state morphology is required for effective application of the active layer in a given technology. However, molecular assembly during solid-state formation is a complex function interconnecting the building block chemistry and the processing environment. Insufficient knowledge as to how these aspects engage, especially at the atomistic and molecular scales, has so far limited the ability to predict …

Surface Modification Of Carbon-Based Electrodes For Electrochemical Conversion Processes: Oxygen Reduction Reaction And Bicarbonate Conversion, Udari Shyamika Kodithuwakku Arachchige

Theses and Dissertations--Chemistry

Oxygen reduction reaction (ORR) and conversion of bicarbonate into value-added chemicals are two significant electrochemical processes for energy storage and conversion. ORR is an important electrochemical reaction in fuel cells and metal-air batteries that provide power conversion and storage capacity, respectively, for portable electronics, and electric vehicles. However, the performance of catalysts (e.g., platinum-based) is critically limited by slow kinetics, inefficient four-electron pathway, and surface deactivation. This limited performance of platinum-based catalysts, the scarcity of platinum, and vulnerable supply chains for critical minerals require the development of alternative electrocatalysts now more than ever. Carbon-based materials possess several key properties that …

Water-Soluble Palladium, Copper, And Nickel Catalysts And Their Formation In Ligand-Free Suzuki-Miyaura Cross-Coupling Reactions, Priya Karna

Theses and Dissertations--Chemistry

Transition-metal catalyzed Suzuki-Miyaura (SM) cross coupling is a powerful synthetic method for constructing carbon-carbon and carbon-heteroatom bonds in designing organic compounds, agrochemicals, pharmaceuticals, and precursors for materials. However, the nature of catalysis and identity of the transition metal catalysts used in these reactions remain under debate or unknown. This dissertation reports the studies of three metals: Pd, Cu, and Ni. Pd-nanocluster catalysts and their formation in ligand-free SM reactions with Pd(II) nitrate as a precatalyst was investigated. The catalysts are water-soluble neutral Pd tetramer and trimer in their singlet electronic states as identified by UV-Vis absorption spectroscopy and are formed …

Exploring The Role Of Ring Annulation In Polycyclic Aromatic Hydrocarbons For Organic Electronic Applications, Tanner Smith

Theses and Dissertations--Chemistry

Organic materials offer promising potential for the next generation of electronic devices, as their tunability, processability, and low-temperature manufacturing make them a cheap and versatile alternative to traditional silicon-based electronics. The ability to systematically alter the electronic properties of organic materials is vital for their incorporation into device applications. Polycyclic aromatic hydrocarbons (PAHs) are of significant interest for organic electronic applications, as relevant properties are highly dependent on their size, structure, and functionalities, and thus can be tuned to fit a wide variety of applications. Due to the enormous number of structural isomers available in larger PAHs, the development of …

Developing And Deploying Data-Driven Tools For Accelerated Design Of Organic Semiconductors, Vinayak Bhat

Theses and Dissertations--Chemistry

Organic semiconductors have gained widespread attention due to their potential applications in flexible, low-cost, lightweight electronics, energy storage and generation technologies, and sensing applications. However, developing new organic semiconductors with improved performance remains a significant challenge due to the vast chemical space of possible molecular and materials structures. Furthermore, the high cost and time-consuming nature of experimental synthesis and characterization hinder the rapid discovery of new materials. To overcome these challenges, this dissertation presents a data-driven approach to organic semiconductor discovery. The primary focus of this work is the development of data-driven tools, namely machine learning models, to predict critical …

First Principles Calculations To Investigate Surface And Catalytic Properties Of Materials For Green Energy Generation, Keerthan Raghavendra Rao

Theses and Dissertations--Chemistry

Climate change due to greenhouse gas build up in the earth’s atmosphere is an existential threat to humanity. To mitigate climate change, a significant shift from fossil fuels is necessary. Over the years, several renewable energy sources like solar, wind, geothermal etc. have been explored with the aim providing carbon-free energy. In this work, we focus on using density functional theory (DFT) methods to investigate key functional properties of materials of interest for applications in solar cells and catalytic conversion for energy generation. We show geometric effects of carboxylic acid binding on a transition metal surface to impact the deoxygenation …

Synthesis And In Situ Characterization Of Intercalated Transition Metal Oxide Nanomaterials Investigated For Novel Cathode Applications, Ahamed Ullah

Theses and Dissertations--Chemistry

To develop an effective battery cathode material that can be useful for future batteries, the thermal stability and ion diffusion dynamics need to be well understood. In situ transmission electron microscopy (TEM) is a popular and proven technique to study the evolution of local structures during the dynamic processes in the cathode materials. This dissertation will demonstrate the application of high-resolution imaging and in situ heating and biasing in the TEM to study the structure and composition, morphology change, and ion diffusion in the cathode materials.

The three chapters in this dissertation will be focused on the two cathode materials: …

Crystal Engineering Of Asymmetric And Pyrene Fused Annulenes For Use In Organic Electronic Materials, Garrett Fregoso

Theses and Dissertations--Chemistry

Since the development of TiPS Pentacene, the use of trialkylsilylethynyl groups has become a commonly utilized moiety for stabilizing, solubilizing, and directing crystal packing of acenes and acene-like compounds, leading to the development of a well-defined series of trends that aid in the prediction of crystal packing for the development of organic semiconducting materials. While these trends have been extensively studied in mainly symmetric linear systems, it is important to determine how, if at all, asymmetry of the aromatic core affects these well-defined trends. This constitutes the basis of Chapter 2, which explores the crystal engineering and physical properties of …

Nanomaterial Synthesis And Real Time Investigation Of Thermal Effects On Nanomaterial And Nano-Interfaces For Real World Applications, Rose H. Pham

Theses and Dissertations--Chemistry

As interest in nanomaterials and nanotechnology continues to grow, so does the need for more efficient and economical synthesis methods to keep up with the demand. The applications for nanomaterials are seemingly endless as they have functions in energy, biomedical, environmental, and many more. Working to develop different morphologies and sizes of nanomaterials will further help expand its utility. With the use of advanced characterization techniques such as in situ transmission electron microscopy (TEM), real time studies on the effects of external forces on nanomaterials are possible under controlled environments. This will give insight on how nanomaterials will perform in …

Synthesis, Crystal Engineering, And Material Properties Of Small-Molecule Organic Semiconductors, Emma Holland

Theses and Dissertations--Chemistry

Small-molecule organic materials are of increasing interest for electronic and photonic devices due to their solution processability and tunability, allowing devices to be fabricated at low temperature on flexible substrates and offering utility in specialized applications. This tunability is the result of functionalization through careful synthetic strategy to influence both material properties and solid-state arrangement, both crucial variables in device applications. Functionalization of a core molecule with various substituents allows the fine-tuning of optical and electronic properties, and functionalization with solubilizing groups allows some degree of control over the solid- state order, or crystal packing. These combinations of core chromophores …

Plasmon Enhanced Single Molecule Fluorescence In Zero Mode Waveguides (Zmws), Abdullah Masud

Theses and Dissertations--Chemistry

Plasmonic nanostructures are an extensive research focus due to their ability to modify the photophysical properties of nearby fluorophores. Surface plasmons (SP), defined as the collective oscillation of delocalized electrons, are the fundamental characteristic primarily responsible for altering those photophysical properties. Studying fluorophores at the single-molecule level has received significant attention since more specific information can be extracted from single molecule-based studies, which otherwise could be obscured in ensemble studies. However, single-molecule studies are inherently challenging because the signal from a single molecule is usually dim, making it difficult to detect. The situation is even worse in a crowded environment …

Determining Material Structures And Surface Chemistry By Genetic Algorithms And Quantum Chemical Simulations, Josiah Jesse Roberts

Theses and Dissertations--Chemistry

With the advent of modern computing, the use of simulation in chemistry has become just as important as experiment. Simulations were originally only applicable to small molecules, but modern techniques, such as density functional theory (DFT) allow extension to materials science. While there are many valuable techniques for synthesis and characterization in chemistry laboratories, there are far more materials possible than can be synthesized, each with an entire host of surfaces. This wealth of chemical space to explore begs the use of computational chemistry to mimic synthesis and experimental characterization. In this work, genetic algorithms (GA), for the former, and …

Synthesis Of Metal Oxide Surface And Interface Arrays By A Combined Solid-Liquid- Vapor/Vapor-Liquid-Solid Approach, Alexandra J. Riddle

Theses and Dissertations--Chemistry

This project was motivated by an in situ heating experiment in the transmission electron microscope (TEM) in which gold (Au) nanoparticles were observed to dissolve tin dioxide (SnO2) nanowires (NWs) under vacuum. The explanation for this observation was that the high-temperature and low-pressure environment of the TEM caused the reverse reaction of the well-known vapor-liquid-solid (VLS) method commonly used to grow NWs. In the VLS process, a metal catalyst absorbs reactant vapor until it becomes supersaturated. The precipitation of the NW occurs at the liquid-solid interface, which ceases when there is no longer reactant vapor, and the diameter of the …

Uncovering Structure-Property Relationships Of Inorganic Nanomaterials Via Transmission Electron Microscopy, Melonie Thomas

Theses and Dissertations--Chemistry

The rapid increase of research in nanoscale devices and nanotechnology in the past few decades has revealed that nanomaterials may possess exceptional properties that are significantly different from the bulk counterpart, due to local rearrangements of the atoms at surfaces and defects. Transmission electron microscopy (TEM) is an indispensable tool when it comes to the characterization of nanomaterials, primarily due to its ability to resolve the local-structure of materials at the atomic-scale. To study dynamic processes, however, regular TEM experiments are inadequate, as they provide only before and after information rather than the real-time data essential to understanding a reaction …

Interfaces In Lead-Free Tin Perovskite Photovoltaics: An Investigation Of Energetics, Ion Mobility, Surface Modification, And Performance, Alex Boehm

Theses and Dissertations--Chemistry

Halide perovskites have generated tremendous interest as low-cost semiconductors for optoelectronics, such as photovoltaics, lasers, and light emitting diodes due to their extraordinary optical and transport properties. Perovskite photovoltaics in particular have demonstrated a meteoric rise in power conversion efficiencies and drawn considerable interest as a next-generation solar energy technology. The rapid development has centered around lead-based derivatives, and concerns regarding the toxicity of lead has sparked interest in low toxicity and more environmentally friendly perovskite derivatives. In this regime tin (Sn) is regarded as a prominent alternative owing to the ideal bandgap and reduced toxicity exhibited by Sn-halide perovskites. …

Derivatization Of Stable, Soluble Redox-Active Organic Materials For Non-Aqueous Redox Flow Batteries, Thilini Malsha Suduwella

Theses and Dissertations--Chemistry

In screening active materials for redox flow batteries (RFBs) – in which solubility is important to raise the volumetric energy density – scientists are slave to trial and error, modifying organic molecules in an attempt to optimize (increase) solubility without compromising other important properties such as stability and redox potential. A trained chemist can often predict the trends of solubility with the structural modifications in the neutral state of the materials, but when it’s come to the charged state of the materials, it doesn’t follow the same trend as the neutral species and relative values are hard to predict. The …

Towards The Rational Design Of Organic Semiconductors Through Computational Approaches, Qianxiang Ai

Theses and Dissertations--Chemistry

Though organic semiconductors have illustrated potential as industry-relevant materials for electronics applications, there are few guidelines that can take one from molecular design to functional materials. This limitation is, in part, due to incomplete understanding as to how the atomic-scale construction of the π-conjugated molecules that comprise the organic semiconductors determines the nature and strength of both the noncovalent intramolecular interactions that govern molecular conformation and noncovalent intermolecular interactions that regulate the energetic preference for solid-state packing. Hence, there remain several fundamental questions that need to be resolved in order to design organic semiconductors from a priori knowledge, including: What …

Developing And Testing Redox Active Organic Molecules For Nonaqueous Redox Flow Battery Applications, Nuwan Harsha Attanayake

Theses and Dissertations--Chemistry

Non-emissive, sustainable energy sources such as solar, wind, and geothermal power have continued to provide an increasing amount of electricity to support electrical grids. Due to the intermittent nature of renewable energy sources like wind and solar, grid energy storage systems must adjust for variations in and mismatches between electricity production and consumption. Among the available energy storage technologies, redox flow batteries (RFBs) are expected to play a critical role in the grid energy storage due to their decoupled energy and power, long service life, and simple manufacturing. However, the worldwide market penetration of RFB systems is still limited due …

Laser Ablation In Liquid For The Controlled Production Of Photoluminescent Graphene Quantum Dots And Upconverting Nanoparticles, Rosemary Lynn Calabro

Theses and Dissertations--Chemistry

Photoluminescent­ (PL) nanomaterials play an important role in areas including displays, sensing, solar, photocatalysis, and bio applications. Traditional methods to prepare PL materials suffer many drawbacks such as harsh chemical precursors, complicated synthetic steps, and production of many byproducts. Laser ablation in liquid (LAL) has emerged as a promising alternative to prepare materials that is single-step, fast, uses fewer precursors, produces fewer side products, and has simple purification steps. During LAL, a solid target is irradiated with a pulsed laser source. The laser pulses cause plasma plumes of the target material to form which are cooled, condensed, and can react …

Designing Metal-Halide Perovskites With Enhanced Optical Properties And Stability Using Surface Ligands, Md Aslam Uddin

Theses and Dissertations--Chemistry

Metal-halide perovskites (MHPs), with formula ABX₃ (A = methylammonium, formamidinium, or Cs⁺; B = Sn²⁺ or Pb²⁺; and X = Cl^-, Br^-, or I^-) are versatile and attractive materials because of their tunable optical and electronic properties. These optical and electronic properties include tunable direct band gaps, high absorption coefficients, low exciton binding energies, relatively high electron and hole mobilities, narrow emission line-widths, and high photoluminescence (PL) quantum yields (Φ_PL). Much of the initial excitement around organic metal-halide perovskites focused on their application in photovoltaics (PVs) …

Identification Of Adsorbate Ft-Ir Bands Using In-Situ Techniques: Pd Speciation And Adsorption Chemistry Of Pd-Zeolites For Passive Nox Adsorption, Robert Bruce Pace Iii

Theses and Dissertations--Chemistry

To meet increasingly stringent automotive emissions standards, further improvements in catalytic converter design are necessary. Current automotive catalyst systems are effective at eliminating emission of nitrogen oxides (NO_x) once the catalyst reaches operational temperature (~200 °C). NO_x emitted at lower catalyst temperatures now comprises most of the NO_x released during a typical test cycle. Referred to as “the cold start problem” this issue has come to the forefront of automotive catalyst development, as mitigating these emissions is necessary to further reduce automotive emissions. Passive NO_x adsorbers present an appealing solution to the cold start problem, …

Modeling The Condensed-Phase Behavior Of Π-Conjugated Polymers, Walker Mask

Theses and Dissertations--Chemistry

It is well established that the morphology and physical properties of an organic semiconducting (OSC) material regulate its electronic properties. However, structure-function relationships remain difficult to describe in polymer-based OSC, which are of particular interest due to their robust mechanical properties. If relationships among the molecular and bulk levels of structure can be found, they can aid in the design of improved materials. To explore and detail important structure-function relationships in polymer-based OSC, this work employs molecular dynamics (MD) simulations to study various π-conjugated polymers in different environments. Two independent investigations are discussed in this work. One investigation examines how …

Oxidative Degradation Of Lignin And Investigation Of Utilization Of Lignin-Derived Materials As Building Blocks For Epoxy Resins, Zhen Fang

Theses and Dissertations--Chemistry

Lignin, the second most abundant biopolymer on earth, is potentially a replaceable source for bulky fuels and chemical feedstocks. There have been numerous reports on methods for the oxidative cleavage of β-O-4 linkages but relatively few reports of how those methods affect other linkages that are present in lignin. We investigated how the β-1 and β-5 linkages respond under oxidative conditions proposed for lignin deconstruction based on their effect on β-O-4 linkages. Mechanochemical treatment of lignin can greatly improve the yield of monomer products and we applied a mechanochemical approach, using powerful ring-and-puck milling to promote lignin degradation. Along with …

Synthesis And Characterization Of Carbonaceous Particles From Xylose And Soybean Residuals, Shanshan Wang

Theses and Dissertations--Chemistry

Carbonaceous materials, especially in micro and nanoscale, are useful in optical, energy storage, electronic, and biomedical devices or technologies. Techniques have been developed for preparation and modification of the carbonaceous materials, while it is still challenging to tailor the properties of carbonaceous materials effectively and economically. Laser is a powerful tool in academic and industrial laboratories, which also plays important roles in the preparation and modification of high-performance carbonaceous nanomaterials.

In this study low-cost hydrothermal synthesis, high-temperature annealing, and Laser ablation (LAL) methods are developed to prepare functionalized carbon nanomaterials and modify their electrochemical and optical properties.

Sub-micro hollow carbon …

Synthesis, And Structural, Electrochemical, And Magnetic Property Characterization Of Promising Electrode Materials For Lithium-Ion Batteries And Sodium-Ion Batteries, Ruixin Han

Theses and Dissertations--Chemistry

Iron oxides, have been widely studied as promising anode materials in lithium-ion batteries (LIBs) for their high capacity (≈ 1000 mA h g^-1 for Fe₂O₃ and Fe₃O_4,), non-toxicity, and low cost. In this work, β-FeOOH has been evaluated within a LIB half-cell showing an excellent capacity of ≈ 1500 mA h g^-1 , superior to Fe₂O₃ or Fe₃O_4. Reaction mechanism has been proposed with the assistance of X-ray photoelectron spectroscopy (XPS). Various magnetic properties have been suggested for β-FeOOH such as superparamagnetism, antiferromagnetism and complex …

Design And Synthesis Of Functional Organic Materials, Anthony Joseph Petty Ii

Theses and Dissertations--Chemistry

Control of solid state ordering in conjugated small molecules is paramount to the continued development and implementation of organic materials in electronic devices. However, there exists no reliable method on which to predicatively determine how a change to the molecular structure will impact the solid-state packing. As such, the molecule must be synthesized before its solid-state packing can be definitively evaluated. However, once the packing structure of a material is known there exist both qualitative structure- function relationships derived from the literature, as well as quantitative computational methods that can be employed to suggest if a material will perform well …

Carbon Quantum Dots: Bridging The Gap Between Chemical Structure And Material Properties, Timothy J. Pillar-Little Jr.

Theses and Dissertations--Chemistry

Carbon quantum dots (CQDs) are the latest generation of carbon nanomaterials in applications where fullerenes, carbon nanotubes, and graphene are abundantly used. With several attractive properties such as tunable optical property, edge-functionalization, and defect-rich chemical structure, CQDs have the potential to revolutionize optoelectronics, electro- and photocatalysis, and biomedical applications. Chemical modifications through the addition of heteroatoms, chemical reduction, and surface passivation are found to alter the band gap, spectral position, and emission pathways of CQDs. Despite extensive studies, fundamental understanding of structure-property relationship remains unclear due to the inhomogeneity in chemical structure and a complex emission mechanism for CQDs.

This …

Study Of The Effect Of Steric Bulk Of Side Chains On The Properties Of Conjugated Polymers, Bei Zhang

Theses and Dissertations--Chemistry

Donor-acceptor conjugated polymers opened a new era for conjugated polymer research due to the abundant selection and combination of different conjugated units. This class of polymers function as semiconductor materials with potential application in plastic consumer electronics. The frontier molecular orbital energies of the polymers are generally determined by the selection of donor and acceptor units in the backbone structure, and their substituents. The side chains attached to the backbone not only affect the solubility of the materials, but also their self-assembly and morphological characteristics, which indirectly govern optoelectronic properties. It is important therefore to consider backbone architectures and the …

Exploring The Structure And Properties Of Nanomaterials Using Advanced Electron Microscopy Techniques, Yao-Jen Chang

Theses and Dissertations--Chemistry

Nowadays people are relying on all kinds of electronic devices in their daily life. All these devices are getting smaller and lighter with longer battery life due to the improvement of nanotechnology and materials sciences. Electron microscopy (EM) plays a vital role in the evolution of materials characterization which shapes the technology in today’s life. In electron microscopy, electron beam is used as the illumination source instead of visible light used in traditional optical microscopy, the wavelength of an electron is about 10⁵ times shorter than visible light. By taking this advantage, the resolving power and magnification are greatly …