Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 11 of 11
Full-Text Articles in Physical Sciences and Mathematics
Synthesis And Characterization Of Pani And Pani/Nanometal Oxides, Photocatalytic And Adsorbent Applications, Bi̇lge Budak, Si̇bel Demi̇rel
Synthesis And Characterization Of Pani And Pani/Nanometal Oxides, Photocatalytic And Adsorbent Applications, Bi̇lge Budak, Si̇bel Demi̇rel
Turkish Journal of Chemistry
In this study, polymeric nanocomposites of PANI and PANI/nanometal oxides (Fe2O3, NiO, SnO2, WO3, ZrO2) as photocatalysts were synthesized with a chemical polymerization method. Structural characterizations of synthesized polymeric nanocomposites were performed as follows: FT-IR, SEM, TEM and XRD, and TGA. The effect of pure nanometal oxides (Fe2O3, NiO, SnO2, WO3, ZrO2) and polymeric nanocomposites on the degradation of naproxen, the drug active ingredient, was studied under visible light (UV-A at 365 nm) and in the absence of light. In this study, photocatalytic and adsorbent efficiency of polymeric nanometal oxides were investigated. In order to determine the effect of pure …
Synthesis Of Modified Nanocomposite Material And Its Use On Removal Of Cesium Fromaqueous Media, Bi̇lal Çeti̇n, Mustafa Özcan, Bektaş Karakelle
Synthesis Of Modified Nanocomposite Material And Its Use On Removal Of Cesium Fromaqueous Media, Bi̇lal Çeti̇n, Mustafa Özcan, Bektaş Karakelle
Turkish Journal of Chemistry
A nanocomposite containing Fe3O4, chitosan (Ch), and hexacyanoferrate (HCF) was synthesized in the form of powder. The physicochemical properties of this nanocomposite are determined using different techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM). The existence of Cs (Cs) ions onto the surface of the nanocomposite was verified by dispersive X-ray spectroscopy (EDX). FTIR spectra confirmed that the nanocomposite was well coordinated. The batch technique was applied to evaluate the influences of initial pH value, temperature, contact time, shaking rate, initial Cs concentration, and competing cations on the efficiency of Cs …
Synthesis And Characterization Of Amino Sulfonic Acid Functionalized Graphene Oxide As A Potential Carrier For Quercetin, Ali Sadeghi, Mohammad Faeli, Mahmood Tajbakhsh, Abdolreza Abri, Monireh Golpour
Synthesis And Characterization Of Amino Sulfonic Acid Functionalized Graphene Oxide As A Potential Carrier For Quercetin, Ali Sadeghi, Mohammad Faeli, Mahmood Tajbakhsh, Abdolreza Abri, Monireh Golpour
Turkish Journal of Chemistry
In this investigation, a new nanocomposite as a nanocarrier based on functionalized graphene oxide was synthesized by reaction of tetraethylenepentamine and chlorosulfonic acid with functional groups on the surface of GO. The synthesized nanocomposite was characterized by FT-IR, XRD TGA, FE-SEM, EDAX, TEM, and AFM analysis. To explore the potential of nanocomposites in drug delivery, the loading and releases of quercetin as an anticancer drug were investigated. The result displayed that more than 90% of the drug was loaded on the nanocarrier and the release of the drug is depending on the pH of the environment such that the releases …
In Situ Preparation Of Hetero-Polymers/Clay Nanocomposites By Cuaac Click Chemistry, Mehmet Ati̇lla Taşdelen, Çağatay Altinkök
In Situ Preparation Of Hetero-Polymers/Clay Nanocomposites By Cuaac Click Chemistry, Mehmet Ati̇lla Taşdelen, Çağatay Altinkök
Turkish Journal of Chemistry
A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N3) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using 1H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/ intercalated morphologies. In addition, the increase of MMT-N3 loading not only improved …
Anticorrosion Coating For Magnesium Alloys: Electrospun Superhydrophobic Polystyrene/Sio$_{2}$ Composite Fibers, Nesri̇n Horzum Polat, Özlem Kap, Ami̇r Farzaneh
Anticorrosion Coating For Magnesium Alloys: Electrospun Superhydrophobic Polystyrene/Sio$_{2}$ Composite Fibers, Nesri̇n Horzum Polat, Özlem Kap, Ami̇r Farzaneh
Turkish Journal of Chemistry
Superhydrophobic nanocomposite coatings for magnesium surfaces with remarkable corrosion resistance were fabricated by electrospinning in the presence of fluorosilane-functionalized silica (SiO$_{2})$ nanoparticles. The effects of surface-modified silica (mod-SiO$_{2})$ nanoparticles on the superhydrophobicity and corrosion resistance of polystyrene (PS)/mod-SiO$_{2}$ fiber coatings were evaluated. The incorporation of the SiO$_{2}$ nanoparticles endows PS fibers with rough surfaces exhibiting a water contact angle (WCA) of 165$^{\circ}$. The surface wettability, corrosion resistance, and their relation to the inorganic content in the PS fibers and the contact angle of the composite coatings were explored. Analysis of the corrosion results confirmed that the PS/mod-SiO$_{2}$ coating protected the …
Fabrication Of Multilayer Graphene Oxide-Reinforced High Density Polyethylene Nanocomposites With Enhanced Thermal And Mechanical Properties Via Thermokinetic Mixing, Burcu Saner Okan
Turkish Journal of Chemistry
High density polyethylene (HDPE) was compounded with thermally exfoliated graphene oxide (TEGO) by thermokinetic mixing in a short time. High shear rates during the compounding process provided high exfoliation and proper dispersion of graphene layers in the polymer matrix. Different TEGO/polymer ratios were used to get efficient melt mixing. Structural analysis by spectroscopic techniques confirmed the exfoliation of TEGO sheets and the coverage of their surfaces by HDPE chains. Furthermore, homogeneous dispersion of graphene sheets in the matrix led to the enhancement in the mechanical and thermal properties of HPDE-based nanocomposites. Especially stress concentration sites were significantly reduced by preventing …
Adsorption Of Cu(Ii) On Three Adsorbents, Fe$_{3}$O$_{4}$/Ni/Ni$_{X}$B Nanocomposite, Carob (\Textit{Ceratonia Siliqua}), And Grape Seeds: A Comparative Study, Tüli̇n Deni̇z Çi̇ftçi̇
Adsorption Of Cu(Ii) On Three Adsorbents, Fe$_{3}$O$_{4}$/Ni/Ni$_{X}$B Nanocomposite, Carob (\Textit{Ceratonia Siliqua}), And Grape Seeds: A Comparative Study, Tüli̇n Deni̇z Çi̇ftçi̇
Turkish Journal of Chemistry
A novel adsorbent Fe$_{3}$O$_{4}$/Ni/Ni$_{x}$B nanocomposite was synthesized and used for the adsorption of copper. Moreover, natural adsorbents carob and grape seeds were used for this purpose. The surfaces and the elemental compositions of the adsorbents were characterized by SEM-EDX. The zero point charges of pH of Fe$_{3}$O$_{4}$/Ni/Ni$_{x}$B nanocomposite, carob, and grape seeds were found as 8.4, 6.0, and 5.6, respectively. The Langmuir, Freundlich, and Dubinin--Radushkevich isotherm models were used for the identification of the mechanism of the adsorption. The adsorptions of Cu(II) on the three adsorbents were well fitted to the Langmuir isotherm. The maximum adsorption capacities obtained from the …
Adsorption Of Copper Ions And Alizarin Red S From Aqueous Solutions Onto A Polymeric Nanocomposite In Single And Binary Systems, Omnia Ali, Sahar Mohamed
Adsorption Of Copper Ions And Alizarin Red S From Aqueous Solutions Onto A Polymeric Nanocomposite In Single And Binary Systems, Omnia Ali, Sahar Mohamed
Turkish Journal of Chemistry
Adsorption of Cu(II) ions and alizarin red S (ARS) has been studied using beads of chitosan (CS) and a chitosan/ZnO nanorod composite (CS-ZnO) in single and binary systems. The beads were synthesized and characterized using Fourier transform infrared spectroscopy, X-ray diffraction, high-resolution transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray analysis. Factors affecting adsorption of Cu(II) ions and ARS such as pH and initial concentrations as well as adsorption kinetics, isotherms, thermodynamics, reusability, and competitive adsorption in binary systems were studied. The results showed that the adsorption kinetics and isotherm data for both adsorbates followed a pseudo-second-order model …
Characterization And Photocatalytic Properties Of Tio$_{2}$/Chitosan Nanocomposites Synthesized By Hydrothermal Process, Funda Okuşluk, Fatma Bi̇lge Emre
Characterization And Photocatalytic Properties Of Tio$_{2}$/Chitosan Nanocomposites Synthesized By Hydrothermal Process, Funda Okuşluk, Fatma Bi̇lge Emre
Turkish Journal of Chemistry
Nanocomposites of TiO$_{2}$/chitosan (nTC) were synthesized by hydrothermal process at 200 $^{\circ}$C. Photocatalytic activity of the nanocomposites was studied with degradation of malachite green (MG) in aqueous medium. Structural and physico-chemical properties of the obtained nanocomposites were characterized by XRD, SEM, BET, FTIR, and particle size analyzer. Complete photodegradation of MG was successfully achieved with the aid of the nanocomposites. The optimum photocatalytic degradation conditions, irradiation time, irradiation power, and amount of catalyst were studied. Photocatalytic activity of the synthesized nanocomposites in terms of degradation of MG was compared with that of undoped TiO$_{2}$ (synthesized by our team) and chitosan …
Immobilization Of Laccase Onto A Porous Nanocomposite: Application For Textile Dye Degradation, Sedef İlk, Deni̇z Demi̇rcan, Semran Sağlam, Necdet Sağlam, Zakir M. O. Rzayev
Immobilization Of Laccase Onto A Porous Nanocomposite: Application For Textile Dye Degradation, Sedef İlk, Deni̇z Demi̇rcan, Semran Sağlam, Necdet Sağlam, Zakir M. O. Rzayev
Turkish Journal of Chemistry
Poly(MA-\textit{alt}-MVE)-$g$-PLA/ODA-MMT nanocomposite was prepared by self-catalytic interlamellar graft copolymerization of L-lactic acid (LA) onto poly(maleic anhydride-\textit{alt}-methyl vinyl ether) copolymer in the presence of octadecyl amine-montmorillonite (ODA-MMT) organoclay. FTIR, $^{1}$H ($^{13}$C) NMR, XRD, and SEM-TEM were utilized for characterizing the resultant nanocomposite. Laccase from \textit{Trametes versicolor} was immobilized onto the prepared nanocomposite by adsorption or covalent coupling. Decolorization of Reactive Red 3 from aqueous solution by laccase immobilized on the nanocomposite was studied in different conditions (pH, temperature, dye concentration, and reaction time) to investigate the decolorization activity with repeated use and storage. The results indicated that more than 77{\%} of …
Effect Of Cmc And Hpc Mixture On The Photocatalytic Activity Of Nd-Tio_2/Sio_2 Film Under Visible Light Irradiation, Parviz Aberoomand, Shahram Moradi, Susan Samadi, Mohammad Saber Tehrani, Mohammad Hadi Givianrad
Effect Of Cmc And Hpc Mixture On The Photocatalytic Activity Of Nd-Tio_2/Sio_2 Film Under Visible Light Irradiation, Parviz Aberoomand, Shahram Moradi, Susan Samadi, Mohammad Saber Tehrani, Mohammad Hadi Givianrad
Turkish Journal of Chemistry
Neodymium-titania/silica films were prepared by the sol-gel method with the addition of various amounts of hydroxy propyl cellulose (HPC) and 5.09 \times 10^{-5} g g^{-1}_{solution} of carboxy methyl cellulose (CMC) in saturated conditions. The porous Nd-TiO_2/SiO_2 was obtained after heat treatment for 2 h at 500 °C, with the surface area up to 276 m^2 g^{-1}, which was measured using the Brunauer, Emmett, and Teller (BET) method. Scanning electron microscopy (SEM) showed that the particle size of Nd-TiO_2/SiO_2 decreased and the microstructure of the film became loose in suitable conditions with the addition of CMC to HPC. Subsequently, the photocatalytic …