Physical Sciences and Mathematics Commons^™

Use Of Electrochemical Techniques And Statistical Analysis To Investigate The Pitting Probability Of Copper, Sina Matin

Electronic Thesis and Dissertation Repository

The development of a safe permanent disposal plan is essential for the long-term disposal of used fuel bundles. Nuclear Waste Management Organization (NWMO) has been investigating the deep geologic disposal of nuclear waste which offers the optimum passive safety system with a negligible probability of release of radionuclides into the environment.

The proposed used fuel containers (UFC) for the permanent disposal of high-level nuclear waste in Canada is comprised of a carbon steel vessel coated with a 3 mm corrosion-resistant copper layer deposited using a combination of electrodeposition and cold spray deposition. Although copper is often considered to be thermodynamically …

Characterization Of Deposited Copper Oxide Films On Copper Substrates, Millicent Castillo

Electronic Thesis and Dissertation Repository

The deposition of copper oxide films on copper substrates was investigated by the electrochemical, thermal, and hydrothermal oxidation of copper. The formed oxides were characterized using various surface analytical techniques to determine the film’s morphology, composition, and thickness. The results show that by growing oxides electrochemically, a duplex layer composing of CuO and Cu₂O film was formed on the copper surface, having characteristics of being porous and possessing needle-like structures. An oxide film composed of CuO and Cu₂O, which shows minimal porosity and possess mixtures of crystalline and non-crystalline structures, is formed on the copper surface …

Investigating The Corrosion Behaviour Of Ni-Based Alloys In Industrially Relevant Environments, Jeffrey D. Henderson

Electronic Thesis and Dissertation Repository

Typical engineering materials may experience high corrosion rates when exposed to aggressive service conditions. Such conditions include high concentrations of aggressive anions and oxidants, high solution acidity, and/or high temperatures. Alloys with high corrosion resistance may be selected to avoid material failure caused by corrosion, for example, Ni-Cr-Mo alloys. These alloys exhibit excellent corrosion resistance due to the formation of a passive oxide film, primarily containing Cr and Mo. However, film breakdown can result in localized corrosion, e.g., crevice corrosion. Localized corrosion processes can penetrate deep into the bulk alloy, threatening its integrity. While the oxide film and localized …

Galvanic Corrosion Of Carbon Steel-Stainless Steel Welds, Mi Li

Electronic Thesis and Dissertation Repository

A water leak in one of the Canada Deuterium Uranium (CANDU) nuclear reactors could lead to galvanic corrosion between the materials of its supporting structures: carbon steel (CS) and stainless steel (SS). This project investigates the effects of physical and chemical solution parameters on the corrosion of galvanically coupled dissimilar CS-SS welds, with the aim of developing a corrosion dynamics model that can be used to assess the long-term integrity of the CANDU reactor structural materials with confidence. The studied parameters were solution pH, temperature, the presence or absence of γ-radiation and the cathode:anode surface area ratio. Multiple electrochemical techniques …

The Influence Of Radiolytically Produced Nitric Acid On The Corrosion Resistance Of Copper-Coated Used Nuclear Fuel Containers, Joseph P. Turnbull

Electronic Thesis and Dissertation Repository

In Canada, the proposed disposal method for high level nuclear waste involves sealing the waste in steel containers with a 3 mm outer copper coating and burying it in a deep geologic repository. However, the thickness of the container is significantly reduced making a reassessment of the influence of γ-radiation, emitted by the waste form, on container corrosion a potential licensing requirement. Under humid aerated conditions, the formation of nitric acid is expected, potentially resulting in the formation of droplets or wetted layers on the container surface. Currently available literature on the corrosion of copper in nitric acid does not …

Corrosion Studies On Lightweight Automotive Alloys: The Effect Of Microstructure And Fundamental Mechanisms, Wilfred J. Binns

Electronic Thesis and Dissertation Repository

Owing to their excellent strength-to-weight ratio and low density, magnesium alloys have the potential to significantly reduce the weight of automobiles leading to decreased emissions and greater range for electrical vehicles. However, the practicality of magnesium alloys for automotive and aerospace applications is severely hindered by their poor corrosion resistance in aqueous environments. Despite intensive research effort, the underlying mechanism(s) responsible for this poor corrosion resistance remains elusive. Further complicating the situation is the presence of secondary microstructures which are necessary for desirable physical properties but lead to microgalvanic coupling which exacerbates the poor corrosion resistance of magnesium alloys. This …

The Electrochemical Study Of Simulated Spent Nuclear Fuel (Simfuel) Corrosion Under Permanent Disposal Conditions, Ziyan Zhu

Electronic Thesis and Dissertation Repository

The safety assessment of spent nuclear fuel under permanent disposal conditions requires examination of the corrosion of the spent fuel waste form (UO₂) inside a failed waste container. The objective of this research project was to develop a detailed mechanism of the UO₂ corrosion process when exposed to groundwater. The redox conditions within a failed container in a deep geologic repository will be complex. The oxidant, H₂O₂, produced by the α-radiolysis of groundwater, will be the main driving force for fuel corrosion. However, the efficiency of fuel dissolution will be determined by the …

Electrochemical And Corrosion Examination Of Copper Under Deep Geologic Conditions For The Application Of Nuclear Waste Containers, Taylor L. Martino

Electronic Thesis and Dissertation Repository

Copper is the selected material for the fabrication of nuclear fuel waste containers in Sweden, Finland and Canada due to its corrosion resistance in the anoxic aqueous environments, anticipated in deep geological repositories. A potential oxidant for copper is bisulphide produced either by the dissolution of minerals or by sulphate-reducing bacteria. The primary goals of this thesis were to determine the mechanism of corrosion of copper in bisulphide environments and to investigate the chemistry of the bentonite porewater that will ultimately be in contact with the copper container.

The mechanism of sulphide film growth and the details of copper corrosion …

The Corrosion Of Carbon Steel Under Deep Geologic Nuclear Waste Disposal Conditions, Shannon L.W. Hill

Electronic Thesis and Dissertation Repository

The proposed disposal scenario for high-level nuclear waste (spent fuel) in Canada is emplacement within a sealed, deep geological repository (DGR) located in either granitic rock or sedimentary clay. Disposal is based on a multi-barrier approach, with the primary barrier being a sealed container which could be either dual-walled with a copper shell over an inner carbon steel vessel for granitic rock or a single thick-walled steel container for sedimentary clay. This study focuses on the corrosion behaviour of A516 Gr70 carbon steel as well as the corrosion products formed in a variety of groundwater compositions and concentrations expected within …

Electrogenerated Chemiluminescence Of Gold Nanoclusters, Mahdi Hesari

Electronic Thesis and Dissertation Repository

A series of monodispersed AuNCs including Au144(SR)60, Au38(SR)24 and Au25(SR)18z (z =1-, 0 and 1+, SR=2-phenylethanethiol) were prepared. All these nanoclusters showed molecule-like optical and electrochemical properties. These two features are essential for an electrogenerated chemiluminescence or electrochemiluminescence (ECL) study. The Au144(SR)60 showed a small HOMO-LUMO gap determined by electrochemistry. No ECL light was seen in the annihilation process, while NIR ECL was observed with tri-n- propylamine (TPrA) (Chapter 2). ECL was highly efficient in the Au38(SR)24/TPrA co- reactant system. This nanocluster also showed ECL emission with benzoyl peroxide (BPO), while no ECL was detected in the annihilation route (Chapter …

The Electrochemistry Of Hydrogen Peroxide On Uranium Dioxide And The Modelling Of Used Nuclear Fuel Corrosion Under Permanent Disposal Conditions, Linda Wu

Electronic Thesis and Dissertation Repository

This thesis reports a series of investigations examining the corrosion process of used nuclear fuel under permanent disposal conditions. The motivation of the project is that the safety assessment of deep geological disposal of spent nuclear fuel requires a fundamental understanding of the processes controlling fuel corrosion which could lead to the release of radionuclides to the geosphere from a failed container.

One primary objective of this project was to develop a computational model in order to simulate fuel corrosion under the disposal conditions. A series of simulations based on COMSOL were designed and developed to determine the influence of …

Electrochemiluminescence Of Thienyltriazoles, Iridium Complexes, Au25 Clusters And Pbs Nanoparticles, Kalen N. Swanick

Electronic Thesis and Dissertation Repository

Electrogenerated chemiluminescence or electrochemiluminescence (ECL), produces light in the vicinity of a working electrode by the excited species of a luminophore formed via electron transfer between radical cations and anions, which are electrogenerated. In order for the ECL system to be efficient, the radicals must be stable in solution. This can be enhanced by adding co-reactants such as benzoyl peroxide (BPO) and tri-n-propylamine (TPrA) that produce strong oxidizing or reducing radicals upon redox reactions. ECL pairs electrochemical and spectroscopic methods and is a powerful analytical technique that is highly sensitive and selective.

A comprehensive, mechanistic study of ECL …