Physical Sciences and Mathematics Commons^™

Material Formulation And Process Optimization Towards Fabricating Robust 3d Printed Structures, Austin Riggins

Doctoral Dissertations

This dissertation focuses on understanding and addressing the fundamental physicochemical phenomena that lead to weak interfaces and structural warpage in material extrusion 3D printing. Polymeric feedstocks used for this manufacturing technique were manipulated through the incorporation of additives that alter the dynamics of the matrix during and after printing. In Chapter II, adhesion between layers of structures printed from PEEK was strengthened through a combination of low-molecular weight additive incorporation and post-printing thermal annealing. Chapter III reports a method for decreasing the irreversible thermal strain of structures printed from poly(lactic acid) by introducing nanographene and photoinitiator additives into the feedstock …

Synthesis Of Block Copolymer Additives For Examining Phase Morphology And Improving Mechanical Properties Of Thermoplastics Elastomers., Bishal Upadhyay

Masters Theses

Polystyrene-block-poly(1,4-butaidene)-block-polystyrene (PS-PB-PS) triblock copolymers are one of the most widely studied thermoplastic elastomers (TPEs) due to their ease of synthesis, non-polar nature, and commercial applicability. Like many block copolymers, incompatibility between PS and PB causes these TPEs to undergo microphase segregation. Many studies have examined the mechanical properties of blends of TPEs and PS homopolymer additives. However, there have been few studies focused on understanding the morphology and mechanical properties of blends of TPEs and copolymer additives with different architectures. Herein, I describe the synthesis of linear and graft copolymer additives based on the random copolymers poly(methyl methacrylate-random-cyclohexyl methacrylate) (PrC). …

The Influence Of Ion-Ion Correlations On Conductivity In Concentrated Ionic Systems, Md Dipu Ahmed

Masters Theses

This study delves into the fascinating realm of concentrated ionic systems, such as ionic liquids, superionic materials, organic ionic plastic crystals, and polyelectrolytes, which hold immense potential for energy storage applications. The focus is on understanding the intricate role of ionic correlations in shaping their ionic conductivity behavior. These correlations can either boost or impede conductivity, yet their underlying mechanisms remain elusive. Through extensive investigation of various materials, including ionic liquids with differing anionic masses, pure organic ionic plastic crystals, and doped systems, this research employs advanced techniques like dielectric spectroscopy and innovative momentum conservation models to quantify these correlations. …

Redox-Active Polymerization Catalysts And Their Applications, Nicholas M. Shawver

Masters Theses

Traditional catalyst systems are reliable means to produce polymers with well-defined architectures and thermomechanical properties; however, they are often limited by a narrow monomer scope and their ability access few, if any, advanced polymer architectures. To address this limitation, a new class of catalysts have recently emerged that feature redox-active moieties that may access advanced architectures through catalyst electronic modulation that arises from redox events occurring on the ligand scaffold or at the active metal center itself. For example, researchers have explored the ability of redox-active catalysts to impart “on-off” kinetic control during ring-opening polymerizations and their ability to access …

Understanding The Polymerization Of Ethyl Cyanoacrylate In The Superglue Fuming Of Latent Prints To Optimize Print Retrieval, Leondra Shawntae Lawson

Masters Theses

The cyanoacrylate fuming method (CFM) is a widespread process used in forensics to make latent prints visible for detection, acquisition, and analysis. CFM is governed by the reaction of ethyl cyanoacrylate (ECA) with biological components in fingerprints, which serve as initiators for this anionic polymerization. CFM is not a well-controlled polymerization and there are different outcomes that may result from lower temperature, one of which fits the generalization of creating more ion-pair initiators. Another effect could be minimizing termination through suppressing side reactions. Alternatively, when paired with humidity, lower temperatures may cause surface condensation, decreasing the quality of the print. …

The Development Of Tailored Amphiphilic Copolymers For Detergent-Free Integral Membrane Protein Extraction, Cameron Edward Workman

Doctoral Dissertations

Integral membrane proteins are prolific targets for the design, development, and delivery of pharmaceuticals. In fact, over 60% of all currently available drugs target these proteins to accomplish their therapeutic effect. However, integral membrane proteins remain the least characterized class of all proteins, accounting for only ~2% of all solved protein structures. One of the primary reasons for this low number of solved protein structures is that many membrane proteins lose their native conformation when extracted using conventional methods (e.g. detergents), convoluting accurate structure determination. In contrast, amphiphilic styrene-maleic acid copolymers (SMAs) were recently discovered to readily isolate membrane proteins …

Elucidating The Importance Of Structure, Surfaces, And Interfaces In Polymer Nanoparticles And Nanocomposites, Jacob E. Fischer

Doctoral Dissertations

This dissertation details research conducted to elucidate the importance of structure, surfaces, and interfaces in both polymeric nanoparticles and polymer nanocomposites. The fundamental understanding that is garnered in these studies provides a foundation to rationally develop nanocomposites tailored for unique functionalities, performance and applications.

Soft polymeric nanoparticles, have shown to imbue non-traditional diffusive properties, the strength of which decreases with crosslinking density of the nanoparticle. The crosslinking dependent morphology of these nanoparticles is first characterized in a dilute solution of good solvent (Chapter 2). The scattering results revealed that the structure ranges from a swollen polymer in good solvent (0% …

Controlling Polymer Molecular Structure And Morphology: From Illumination Of Conjugated Polymers To Polymer Chain Depolymerization, Josh Moncada

Doctoral Dissertations

Polymers remain a prominent component of our lives, and finding methods to control their structure or morphology are needed to tune material properties. This dissertation reports methods to alter the conformation, morphology, or structure of polymeric materials. Chapter two describes the impact of exposure to white light during annealing of conjugated polymer blends on their morphology and optoelectronic performance. The observed changes in the morphology correlate strongly to the variation in photoluminescence (PL) with illumination, including that the PL varies less with illumination at higher Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] loadings, offering foundational understanding to guide the structure and optoelectronic performance of conjugated polymer …

Functional Bottlebrush Polymer Additives For Thin Films And Coatings, Travis S. Laws

Doctoral Dissertations

Bottlebrush polymers are a class of highly branched polymers consisting of polymeric side chains that are densely grafted to a linear backbone. Their highly branched architecture results in surface enrichment across a broad range of materials. The goal of my research has been centered around the design of functional bottlebrush polymers and their use as surface active additives in blend films and coatings.

In the first chapter, we examine the segregation behavior of polystyrene bottlebrushes that are blended with linear polystyrene. We systematically vary the lengths of the bottlebrush backbone (Nb), side-chain (Nsc), and the linear matrix (Nm) in order …

How Dynamic Bond Results In The Unique Viscoelastic Behavior Of The Associating Polymers, Sirui Ge

Doctoral Dissertations

Associating polymer is a special kind of polymer possessing transient reversible bonds in addition to the conventional covalent bonds. The reversible bonds provide unique dynamics and fascinating viscoelastic properties, resulting in attractive applications for these polymers, such as self-healing and shape memory materials. Despite many years of studies, the understanding of dynamics of polymers with reversible bonds, especially on molecular level, is still in the rudimentary stage, preventing the rational design of the potential novel functional materials based on associating polymers. In this dissertation, we provide a detailed and quantitative understanding of the dynamics and viscoelastic properties of associating polymers. …

Polynorbornenes For Advanced Applications And Processes, Xinyi Wang

Doctoral Dissertations

Polynorbornenes have dramatically different properties and various applications depending on their chemical structures. The modular nature of norbornene-based systems provides a facile route toward synthesizing diverse polymeric materials, thus making them ideal materials for systematic structure-property investigations. Herein, their application as gas separation membranes and the correlation between their gas-transport properties and polymer structures will be investigated. Though many valuable correlations between gas-permeability and polynorbornene structure have been studied previously, many of these efforts have focused heavily on designing materials with various chemical structures to achieve high permeabilities. In contrast, the influence of molecular structure on: a) polynorbornene chain packing …

Design Of Polymeric Membranes For Large-Scale Energy Storage, Michelle L. Lehmann

Doctoral Dissertations

Many countries have enacted renewable energy targets of 32% or more by 2040 to reduce their carbon footprint. However, due to the intermittent nature of renewable energy sources, long-duration energy storage systems are vital for providing a secure electricity supply. To meet this demand, new battery technologies utilizing earth-abundant and low-cost components are necessary. Among them, non-aqueous redox flow batteries represent a transformative energy storage system due to their flexible material selection and wide operating voltage window. A membrane plays a critical role in these next-generation energy storage technologies as it separates the anode and cathode while allowing for facile …

The Development Of Photoinduced Initiation Of Olefin Polymerization And Its Applications, Justin M. Burroughs

Doctoral Dissertations

Polyolefin synthesis is an ever-growing field due to the low cost of monomer feed stocks and the wide range of applications of the resulting polymeric material. Polyolefins are most commonly polymerized through coordination-insertion polymerization. One area this field of research has progressed is the development of complex ligand scaffolds to achieve various levels of control over polymerization. For example, researchers have been able to control molecular weight, branching density, and tacticity of various olefin polymerizations. As a result of complex ligand scaffolds, the catalytic systems become more expensive and less industrially applicable. On the other hand, little research efforts have …

Chiral Mesogen-Free Liquid Crystalline Polyethers With Sulfonylated Side Chains And Patchy Brush Nanoparticles, Caleb A. Bohannon

Doctoral Dissertations

Ferroelectric liquid crystalline polymers (LCPs) hold promise for various applications driven by low electric fields, e.g., electrocaloric materials, because of the higher molecular motion in the liquid crystalline (LC) state. However, traditional chiral smectic C (SmC*) LCPs exhibit small spontaneous polarizations due to the bulky aromatic mesogens and weak polar groups. This dissertation research is focused on the design of mesogen-free sulfonylated LCPs with a goal of seeking the ferroelectric SmC* phase. Such LCPs are expected to exhibit high polarizations owing to the sulfonyl’s large dipole moment. A series of poly(oxypropylene)s (POPs), with chirality being introduced into either the backbone …

Application Of Single-Ion Conducting Polymer Electrolytes (Sicpes), Sheng Zhao

Doctoral Dissertations

Polymer electrolytes have been widely studied as a potential candidate for next generation batterie with improved safety and higher energy density. Especially, single-ion conducting polymer electrolytes (SICPEs) have attracted significant attention due to their almost unity lithium-ion transport number, which is believed to help suppress lithium dendrite growth and extend battery cycle life. However, there is still a long way to go before they can be practically applied in batteries, due to their relatively low ionic conductivity at ambient temperature. Therefore, the main goal of this work is to explore various methods that can improve the ionic conductivity of SICPEs …

Interfaces And Dynamics In Polymeric 3d Printing And Crystalline Polymer Blends, Stevenson C. Perryman

Doctoral Dissertations

This dissertation presents experimental work that provide a foundation to rationally improve fused filament fabrication (FFF) and immiscible blend compatibilization. Objects generated from additive manufacturing processes, such as FFF, have intrinsic structural weaknesses which include two project specific examples: structural anisotropy and irreversible thermal strain. Due to low adhesion between individual print layers that results in macroscopic defects, the mechanical strength of printed objects when force is applied perpendicular to the build orientation is drastically reduced. In the first dissertation chapter, we present a protocol to produce interlayer covalent bonds by depositing multi-amine additives between individual layers of a print …

Designing Polymer Materials For Improved Additive Manufacturing, Kaizhong Guan

Masters Theses

Currently, two of the most used additive manufacturing methods for polymers are selective laser sintering (SLS) and fused filament fabrication (FFF). Although at high market size, they both have imperfections. The materials for SLS are limited and the objects manufactured by FFF existing anisotropic behavior. Targeting on these drawbacks, this thesis has proposed a novel method to prepare polypropylene (PP) microsphere which is suitable for SLS with low cost and scalable potential; and a novel material with polycarbonate as matrix that has shown a decrease in anisotropy after FFF printing.

The PP microsphere in this thesis was prepared via liquid-liquid …

Development Of Catalysts For The Ring-Opening Polymerization Of Cyclic Esters And The Coordination-Insertion Polymerization Of Olefins, Alicia Doerr

Doctoral Dissertations

Over the past few decades, interest in the design and synthesis of tailorable polymeric materials has grown due to the well documented correlation between structure, property, and function. However, in order to obtain polymers with desired microstructures, well controlled synthetic methods are needed. Therefore, the continued investigation of homogeneous, single-site polymerization catalysts is important to gain a deeper understanding of how systematic modifications of polymerization conditions, ligand scaffold, metal center identity, cocatalyst or activator identity, etc. affect the catalytic activity, selectivity, and/or polymer topology obtained when using these catalysts for the polymerization of a variety of monomers. This dissertation will …

Characterization Techniques And Cation Exchange Membrane For Non-Aqueous Redox Flow Battery, Kun Lou

Doctoral Dissertations

The motivation of this work comes from one of the major problems of emerging non-aqueous flow battery (NAFB) that a separator or membrane which facilitates conductivity and blocks redox species crossover does not exist. Although many aspects of principles can be mirrored from mature fuel cell and aqueous flow battery, it is found that some well-defined membrane properties in aqueous systems such as swelling, transport and interactions are different in non-aqueous solvents to some extent. However, the approach of this work does follow the way perfluorosulfonate ion exchange membrane (PFSA) facilitated development of fuel cell and aqueous flow battery in …

Stimuli-Responsive Polyelectrolytes: Thermosensitive Zwitterionic Polymers And Charged Shape-Changing Star Molecular Bottlebrushes, Evan M. Lewoczko

Doctoral Dissertations

This dissertation work investigated two classes of stimuli-responsive polyelectrolytes: thermosensitive zwitterionic poly(sulfobetaine methacrylate)s (PSBMAs) and charged shape-changing star molecular bottlebrushes (SMBs). While zwitterionic polymers are explored for numerous applications, their structure-solution behavior relationship was poorly understood. The first part of this dissertation focused on the effects of N-substituents of PSBMAs on their behavior in water. A series of PSBMAs were synthesized, with systematically changed N-substituents, including symmetric N-n-alkyl substituents of various lengths and asymmetric N-substituents comprising one methyl and either one cyclohexyl, phenyl or 2-hydroxyethyl group. The behavior of PSBMAs with symmetric N-substituents …

Synthesis, Characterization, And Applications Of Nucleobase-Functionalized Conjugated Polymers, Sina Sabury

Doctoral Dissertations

Understanding the effect of the functional groups at the terminus of the side chains is important for developing conjugated polymers through side chain engineering. Nucleobases, which are known for their multi-functionality, have not been deeply studied as functionality in conjugated polymers due to synthetic challenges. The overarching goal of my dissertation is to design, synthesize, characterize conjugated polymers bearing nucleobase functionality in their side chains and demonstrate their utility in various applications. Stille cross-coupling and direct arylation polymerization are used to synthesize adenine- and thymine-containing conjugated polymers. Monomer design requirements for successful polymerization are studied and conditions that optimize polymerization …

Stretching The Applications Of Biomass: Development Of Lignin Based Thermoplastic Elastomers And Composite Materials, Anthony Stephen Bova

Doctoral Dissertations

Bio-based plastics and composites have seen increased industry adoption in recent years due to growing demand for materials with a low carbon footprint. The use of lignin as a feedstock for polymers has seen growing interest as the concept of an integrated cellulosic biorefinery gains traction and advances the need to use all components of separated biomass for value-added applications. Historically, use of lignin in thermoplastic and elastomeric copolymers and blends has been bottlenecked by the inability to introduce lignin content above 30 weight percent due to difficulties with interfacial adhesion of lignin with other soft segments. Efforts to overcome …

Synthesis Of Well-Defined Binary Mixed Brushes On 20 Nm Silica Nanoparticles And Asymmetrically End- Functionalized Semicrystalline Poly(Ε-Caprolactone)S, Andrew J. Chancellor

Masters Theses

Well-defined polymers and polymer brushes play an important role in the understanding of their behavior under various conditions and in the fabrication of nanostructured functional materials. This Master’s thesis work focuses the synthesis of two well-defined systems: binary mixed homopolymer brushes grafted on 20 nm silica nanoparticles (NPs) for understanding their microphase separation behavior and asymmetrically end-functionalized semicrystalline poly(- caprolactone) polymers for use in the fabrication of multicomponent polymer brushes on flat substrates with various architectures. While theoretical and simulation studies have revealed intriguing morphologies of mixed homopolymer brushes grafted on nanospheres with a size similar to those of grafted …

Providing Insight To Enable The Design Of Tailored, Nano-Structured Polymeric Surfaces And Interfaces, Onome J. Agori-Iwe

Doctoral Dissertations

Methods are presented for modifying polymeric material surfaces using: 1) selective surface segregation in binary branched/linear polymer blends, and 2) surface functionalization with polymer brushes. Using neutron reflectivity, elastic recoil detection, and other complementary techniques, the aim was to identify structure-property relationships and provide fundamental insight into the time evolution and formation of surfaces and interfaces in these materials.

In blends of poly(styrene) (PS) HyperMacs and DendriMacs in a linear deuterated PS (d-PS) matrix, smaller hyperbranched additives (<1E6 g/mol) move slower than their linear analogues. Larger (>1E6 g/mol) and less flexible hyperbranched additives with smaller fractal dimensions move faster than their linear analogues, suggesting that they are less …

Dually Responsive Shape-Changing Linear And Star Molecular Bottlebrushes With Bicomponent Side Chains, Ethan Wesley Kent

Doctoral Dissertations

Molecular bottlebrushes (MBBs) can exhibit large conformational changes from wormlike to globular in solution in response to environmental stimuli. However, the instability of the collapsed state has prevented shape-changing MBBs from potential applications in, e.g., biomimetic catalysis and substance delivery. This dissertation work focused on dually responsive linear and star MBBs composed of bicomponent side chains in the form of either homografted diblock copolymer or binary heterografted polymeric side chains. When one polymer component collapsed, driving the shape changing of MBBs, another component served as a stabilizer. When both components in the side chains were stimuli-responsive, an additional level of …

Development Of High-Performing Polydimethylsiloxane-Based Membranes For Carbon Dioxide Separation, Tao Hong

Doctoral Dissertations

Membrane separation is highlighted as one of the most promising approaches to mitigate the excessive CO₂ [carbon dioxide] emission, due to its significant reduction of energy cost compared with many conventional separation techniques. Unfortunately, the separation performance of current membranes does not meet the practical CO₂/N₂ [nitrogen] separation requirements. And due to the huge volume of industrial flue gas, membranes with exceptionally high permeability are needed for practical reasons.

Currently, the separation mechanism of most polymeric membranes is based on size-sieving. However, this method is not sufficient for CO₂/N₂ separations due to the …

Development And Implementation Of Redox-Active Olefin Polymerization Catalysts, William Curtis Anderson Jr.

Doctoral Dissertations

Investigating homogeneous polymerization catalysts has been a thriving area of chemistry in the academic realm for several decades now, and has helped drive the development of a range of materials, from designer plastics to cheap commodity polymers. Billions of pounds of these materials are produced every year, which ensures that continuing research in the area will be necessary to improve current processes and enable more economic use of our resources.

This dissertation showcases the Long group’s research in homogeneous polymerization catalysis and our impact on the field thus far. We show that intelligent design of redox-active catalysts allows for a …

The Effect Of Plant Source On Lignin-Based Polyurethanes And The Interdiffusion Dynamics Of Semi-Rigid Polymers, Jason Michael Lang

Masters Theses

The work reported in this thesis increases our understanding of the effect of lignin plant source on the mechanical and morphological properties of lignin-based polyurethanes and the interdiffusion of glassy/liquid bilayer thin films. The interdiffusion of glassy/liquid polymer pairs has received much less attention than liquid/liquid bilayers, leading to conflicting results and unresolved discrepancies. Therefore, the reported study of interdiffusion between polysulfone glassy/liquid polymer layers provides insight into the dynamics of these systems.

This thesis first reports the correlation between the mechanical properties of lignin-based polyurethanes and the lignin plant source. Lignin is a molecule that can be used as …

Synthesis, Characterization, And Reactive Modification Of 2-Vinyl-4,4-Dimethyl Azlactone Polymers, Bethany Michelle Aden

Doctoral Dissertations

Polymeric materials possessing specific functionality have been designed for use in applications such as membranes, biocompatible coatings, lubricants, and tissue engineering. Because the chemical nature of the repeat units set the properties offered by the polymer, the ability to reactively modify polymer chains to integrate specific functionality expands the range of potential applications. Thus, reactive modification of polymer thin films provides a useful route to confer new properties to the underlying material, with the range, strength and type of interaction across the interface dictated by the display of functional groups decorating the surface. To address the links between design, in …

Effect Of Crosslinking On Carbon Nanotube Materials Through Chemical Treatment And Irradiation, Xinyi Lu

Doctoral Dissertations

Carbon nanotubes (CNTs) exhibit a variety of exceptional properties, especially their ultrahigh tensile strength on the order of 100GPa show promise for constituting the next-generation carbon fiber. However, challenges remain to translate these properties into useful technology, primarily due to the sliding of the tubes past one another under tensile loading. The work presented in this dissertation is focused on enhancing the interaction between the CNTs and their bundles in a macro-assembly, in order to improve the tensile properties of the material.

Applying inter-tube crosslinks has been predicted to significantly enhance the stress transfer between the CNT components. We developed …