Physical Sciences and Mathematics Commons^™

An Efficiently Excited Eu3+ Luminescent Site Formed In Eu,O-Codoped Gan, Takenori Iwaya, Shuhei Ichikawa, Volkmar Dierolf, Brandon Mitchell, Hayley Austin, Dolf Timmerman, Jun Tatebayashi, Yasufumi Fujiwara

Physics & Engineering Faculty Publications

For the development of III-nitride-semiconductor-based monolithic micro-light-emitting diode (LED) displays, Eu,O-codoped GaN (GaN:Eu,O) is a promising material candidate for the red LEDs. The luminescence efficiency of Eu-related emission strongly depends on the local atomic structure of Eu ions. Our previous research has revealed that post-growth thermal annealing is an effective method for reconfiguring luminescent sites, leading to a significant increase in light output. We observed the preferential formation of a site with a peak at similar to 2.004 eV by the annealing process. In this study, we demonstrate that it is a previously unidentified independent site (OMVPE-X) using combined excitation-emission …

Measuring The Pulse Duration Of A Femtosecond Laser Using Intensity Autocorrelation, Ross N. Relic

Macalester Journal of Physics and Astronomy

In this experiment, an intensity autocorrelator is set up in order to measure the pulse duration of a passively mode-locked Titanium-Sapphire laser with a power of 267mW producing femtosecond pulses. Then this measurement, as well as a measurement of the laser’s spectrum, is used to test the Uncertainty Principle. Intensity autocorrelation is a well-established technique for measuring pulse duration, and is among the more intuitive techniques for this purpose, which is why it was selected for this experiment. The experimental setup was computerized. The delay of one half of the pulse was controlled by a motorized translation stage which was …

Filaments And Their Application To Air Lasing, Spectroscopy, And Guided Discharge, Ali Rastegari

Optical Science and Engineering ETDs

Laser filamentation is a fascinating phenomenon that occurs when an intense laser beam travels through transparent materials, in particular air. At sufficiently high power (TW in the near IR, GW in the UV), instead of spreading out like a regular laser beam, something remarkable happens: the laser beam becomes tightly focused, creating a thin and intense column of light called a laser filament. Laser filamentation is characterized by two main properties: (I) a high-intensity core that remains narrow over long distances beyond the Rayleigh range and (II) a low-density plasma channel within the core. In recent years, laser filamentation has …

Photonic Monitoring Of Atmospheric Fauna, Adrien P. Genoud

Dissertations

Insects play a quintessential role in the Earth’s ecosystems and their recent decline in abundance and diversity is alarming. Monitoring their population is paramount to understand the causes of their decline, as well as to guide and evaluate the efficiency of conservation policies. Monitoring populations of flying insects is generally done using physical traps, but this method requires long and expensive laboratory analysis where each insect must be identified by qualified personnel. Lack of reliable data on insect populations is now considered a significant issue in the field of entomology, often referred to as a “data crisis” in the field. …

Display Applications For Grating Angle Magnification Accelerated Angular Scanners, Daniel Jesus Valdes

UNLV Theses, Dissertations, Professional Papers, and Capstones

This work includes experimental demonstrations of grating angle magnification accelerated optical beam scanners. Diffraction grating scanners governed by the grating equation can have scan speed advantages over the flat mirror bound by Snell's law of reflection. Scan speed enhancement of 750% was achieved with a 635nm laser and 1800 groove/mm diffraction grating configuration thanks to the grating angle magnification. A three-color diffraction grating scanner shows identical results at larger scan angles. Tunable acceleration speed is a feature enabled by the diffraction grating scanner to operate in a high-speed scanning region and/or high-resolution scanning region depending on the demands of the …

Investigation Of Laser And Nonlinear Properties Of Anderson Localizing Optical Fibers, Cody Ryan Bassett

Optical Science and Engineering ETDs

In this dissertation, I investigate the possibility of lasing and nonlinear phenomena in completely solid-state transverse Anderson localizing optical fibers (TALOFs). I examine three areas within this range of topics. The research in nonlinear phenomena focuses on four-wave mixing (FWM). FWM is of high interest in TALOFs due to the fact that guided localized modes of the fiber each have different propagation constants, and thus unique possible FWM pairs can be generated from the same input pump beam. I demonstrate the generation of FWM in the TALOF by pumping it with 532 nm light into a localized mode and observing …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Collective Behavior Of Dissipatively-Coupled Photonic Oscillator Networks, Jiajie Ding

Dissertations, Theses, and Capstone Projects

This thesis discusses the collective behavior of networks formed by photonic oscillators. The key motivations for doing this research are the interest in developing high power laser arrays on photonic chips and performing optical computing.

Cebaf Injector Model For KL Beam Conditions, Sunil Pokharel, Geoffrey A. Krafft, A. S. Hofler, R. Kazimi, M. Bruker, J. Grames, S. Zhang

Physics Faculty Publications

The Jefferson Lab KL experiment will run at the Continuous Electron Beam Accelerator Facility with a much lower bunch repetition rate (7.80 or 15.59 MHz) than nominally used (249.5 or 499 MHz). While the proposed average current of 2.5 - 5.0 µA is relatively low compared to the maximum CEBAF current of approximately 180 µA, the corresponding bunch charge is atypically high for CEBAF injector operation. In this work, we investigated the evolution and transmission of low-rep-rate, high-bunch-charge (0.32 to 0.64 pC) beams through the CEBAF injector. Using the commercial software General Particle Tracer, we have simulated and analyzed the …

Improved Electrostatic Design Of The Jefferson Lab 300 Kv Dc Photogun And The Minimization Of Beam Deflection, M. A. Mamun, D. B. Bullard, J. R. Delayen, J. M. Grames, C. Hernandez-Garcia, Geoffrey A. Krafft, M. Poelker, R. Suleiman, S.A.K. Wijethunga

Physics Faculty Publications

An electron beam with high bunch charge and high repetition rate is required for electron cooling of the ion beam to achieve the high luminosity required for the proposed electron-ion colliders. An improved design of the 300 kV DC high voltage photogun at Jefferson Lab was incorporated toward overcoming the beam loss and space charge current limitation experienced in the original design. To reach the bunch charge goal of ~ few nC within 75 ps bunches, the existing DC high voltage photogun electrodes and anode-cathode gap were modified to increase the longitudinal electric field (Ez) at the photocathode. The anode-cathode …

Bunch Length Measurements At The Cebaf Injector At 130 Kv, Sunil Pokharel, M. W. Bruker, J. M. Grames, A. S. Hofler, R. Kazimi, Geoffrey A. Krafft, S. Zhang

Physics Faculty Publications

In this work, we investigated the evolution in bunch length of beams through the CEBAF injector for low to high charge per bunch. Using the General Particle Tracer (GPT), we have simulated the beams through the beamline of the CEBAF injector and analyzed the beam to get the bunch lengths at the location of chopper. We performed these simulations with the existing injector using a 130 kV gun voltage. Finally, we describe measurements to validate these simulations. The measurements have been done using chopper scanning technique for two injector laser drive frequency modes: one with 500 MHz, and another with …

New Results At Jlab Describing Operating Lifetime Of Gaas Photo-Guns, M. Bruker, J. Grames, C. Hernández-García, M. Poelker, S. Zhang, V. Lizárraga-Rubio, C. Valerio-Lizárraga, Joshua T. Yoskowitz

Physics Faculty Publications

Polarized electrons from GaAs photocathodes have been key to some of the highest-impact results of the Jefferson Lab science program over the past 30 years. During this time, various studies have given insight into improving the operational lifetime of these photocathodes in DC high-voltage photo-guns while using lasers with spatial Gaussian profiles of typically 0.5 mm to 1 mm FWHM, cathode voltages of 100 kV to 130 kV, and a wide range of beam currents up to multiple mA. In this contribution, we show recent experimental data from a 100 kV to 180 kV setup and describe our progress at …

Plasma-Laser Wakefield Acceleration, Jonathan Babu

Physics

Many texts detailing the derivations and science of Wakefield Acceleration are aimed at graduate and doctorate level scholars, and these may seem intimidating to new physics students. This paper is meant to be an introduction to the nature of plasmas, lasers, laser-plasma interactions, and Laser Wakefield Acceleration (LWFA), with sources given where extra detail may be required. I recognize that this paper is not meant to be an all-encompassing review on the nature of the topics, as these topics are complex and subject of entire textbooks. Instead, I aim to provide an introduction to these topics to a college-level scholar …

Sigesn Light-Emitting Devices: From Optical To Electrical Injection, Yiyin Zhou

Graduate Theses and Dissertations

Si photonics is a fast-developing technology that impacts many applications such as data centers, 5G, Lidar, and biological/chemical sensing. One of the merits of Si photonics is to integrate electronic and photonic components on a single chip to form a complex functional system that features compact, low-cost, high-performance, and reliability. Among all building blocks, the monolithic integration of lasers on Si encountered substantial challenges. Si and Ge, conventional epitaxial material on Si, are incompetent for light emission due to the indirect bandgap. The current solution compromises the hybrid integration of III-V lasers, which requires growing on separate smaller size substrates …

Mutual Interaction Induced Multi-Particle Physics In Qed Systems – Cooperative Spontaneous Emission And Photonic Dimer Enhanced Two-Photon Excitation, Yao Zhou

McKelvey School of Engineering Theses & Dissertations

In recent years, the study of quantum electrodynamics (QED) in light-matter interactions has discovered various interesting phenomenons that orient many applications. However, due to the ambient entanglement among photons and atoms, few-particle dynamics remains challenging to analyze precisely and limits the progress in several fields. In few-particle systems, different number of atoms interacting with the light field generates drastically different results, even when there is only a single photon involved in the system. The interference between individual atom’s spontaneous emission wavefunctions can cooperatively alter the effective atom-light coupling strength. Depending on the spatial distance between individual of atoms and the …

A Hard X-Ray Compton Source At Cbeta, K.E. Deitrick, J. Crone, C. Franck, G.H. Hoffstaetter, Geoffrey A. Krafft, B. D. Muratori, H. L. Owen, Balša Terzić, P. H. Williams

Physics Faculty Publications

Inverse Compton scattering (ICS) holds the potential for future high flux, narrow bandwidth x-ray sources driven by high quality, high repetition rate electron beams. CBETA, the Cornell-BNL Energy recovery linac (ERL) Test Accelerator, is the world’s first superconducting radiofrequency multi-turn ERL, with a maximum energy of 150 MeV, capable of ICS production of x-rays above 400 keV. We present an update on the bypass design and anticipated parameters of a compact ICS source at CBETA. X-ray parameters from the CBETA ICS are compared to those of leading synchrotron radiation facilities, demonstrating that, above a few hundred keV, photon beams produced …

Laboratory Plasma Tests Towards The Production Of Simulated Supernova Shock Waves, Elatia Zaffke, John Sinko, Matthew Thomas, Elisha Polomski

SCSU Journal of Student Scholarship

Supernovae are some of the most powerful explosions that occur in our universe. These explosions generate massive shock waves that span tens of light years in distance. They are responsible for atomic fusion that creates the denser elements, needed for the creation of planets such as our own. The goal of this project was to simulate a supernova on a small scale, in order to study the resultant shock waves and their effects upon the interstellar medium. This research can improve understanding of the impact these events have upon the formation of solar systems and the composition of the interstellar …

Laser Production And Characterization Of Zinc-Oxide Nanoparticles, Bijaya Ghorasainee, Sanjeev Regmi, John Sinko

SCSU Journal of Student Scholarship

ZnO nanoparticles exhibit attractive optical properties that are important in the realm of catalysis and nanotechnology involving the developments of solar cells, chemical sensors and other optoelectronic devices. The main objective of this project was to create zinc oxide nanoparticles of less than 10 nm size by using an Nd: YAG laser and characterize the particle diameter. Zinc oxide nanoparticles were prepared by vaporizing zinc in neat deionized water by laser ablation, aided by a physical 2D-motional micro-stage programmed by Arduino. The addition of surfactant was explored to reduce aggregation of the nanoparticles. Various purification methods were applied to this …

Tailored Frequency Comb Structures And Their Sensing Applications, James Hendrie

Optical Science and Engineering ETDs

The focus of this dissertation is the development and investigation of nested cavity mode-locked lasers and their resultant tailored frequency combs. A nested cavity is made up of two cavities, known as parents. One parent is a larger, active, 100MHz Ti:Saph oscillator and the other is a smaller, passive, 7GHz Fabry-Perot Etalon (FPE). Unlike standard frequency combs that are continuous, a tailored comb’s teeth are distributed in equally spaced groups where the center of each group corresponds to the resonance of the FPE and the side bands are determined by the resonances of the Ti:Saph. This unique coupling of the …

Change Of Parameters Of Arsenidgallium Diode Structures With A Barrierschottki After Laser Radiation, K Ismailov

Karakalpak Scientific Journal

In this article, the effect of low intensities of laser radiation at a radiation density less than critical on the electrical characteristics of arsenide gallium diode structures with a Schottky barrier Cr-n-n+-GaAs is investigated. The possibility of controlling their parameters at relatively low laser radiation intensities is shown.

Change Of Parameters Of Arsenidgallium Diode Structures With A Barrierschottki After Laser Radiation, K Ismailov

Karakalpak Scientific Journal

In this article, the effect of low intensities of laser radiation at a radiation density less than critical on the electrical characteristics of arsenide gallium diode structures with a Schottky barrier Cr-n-n+-GaAs is investigated. The possibility of controlling their parameters at relatively low laser radiation intensities is shown.

Experimental Evidence Supportive Of The Quantum Dna Model, F. Matthew Mihelic

Faculty Publications

The DNA molecule can be modeled as a quantum logic processor in which electron spin qubits are held coherently in each nucleotide in a logically and thermodynamically reversible enantiomeric symmetry, and can be coherently conducted along the pi-stacking interactions of aromatic nucleotide bases, while simultaneously being spin-filtered via the helicity of the DNA molecule. Entangled electron pairs can be separated by that spin-filtering, held coherently at biological temperatures in the topologically insulated nucleotide quantum gates, and incorporated into separate DNA strands during DNA replication. Two separate DNA strands that share quantum entangled electrons can be mitotically divided into individual cells, …

Optical Response Analysis Of Thz Photoconductive Antenna Using Comsol Multiphysics, Jose Isaac Santos Batista

Electrical Engineering Undergraduate Honors Theses

A THz photoconductive antenna consists of antenna pads laid over a photoconductive substrate. These types of antennas are excited through the application of an optical pump (laser), which generates carriers inside the semiconductor. The acceleration and recombination of these carriers produce photocurrent that excites the antenna and generates THz pulse. This thesis focuses on analyzing the optical response of a photoconductive antenna, which consist of the interaction of the incident electric field of a laser pump with the radiating device. It develops the amplitude modulation process of a plane wave of light into a laser pump. It also takes into …

Optimization Of An Injection Locked Laser System For Cold Neutral Atom Traps, Elliot M. Lehman

Physics

Many types of quantum systems are being explored for use in quantum computers. One type of quantum system that shows promise for quantum computing is trapped neutral atoms. They have long coherence times, since they have multiple stable ground states and have minimal coupling with other atoms and their environment, and they can be trapped in arrays, making them individu- ally addressable. Once trapped, they can be initialized and operated on using laser pulses. This experiment utilizes a pinhole diffraction pattern, which can trap atoms in both bright and dark areas. To maximize trap strength, an injection-locked laser amplification system …

Study Of Blinking Statistics In Silver Coated Cobalt Ferrite Single Nanoprticle Using Two-Photon Fluorescence Microscopy, Rajen Kumar Goutam

Open Access Theses & Dissertations

Two-photon fluorescence microscopy is a powerful tool to study the molecular and cellular interactions. This technology is a non-invasive approach with the advantage of three-dimensional imaging up to submicron resolution. Two-photon excitation process is the result of simultaneous absorption of two photons that has special features of reduced photodamaged and elongated penetration depth on samples. In this work, blinking statistics of silver-coated Cobalt ferrite (CoFe2O4) single nanocrystal is studied using two-photon fluorescence microscopy. By defining the intensity threshold, the observed fluorescence is divided into two distinct stages: OFF and ON states. Both of these states followed the inverse power law. …

High Current High Charge Magnetized And Bunched Electron Beam From A Dc Photogun For Jleic Cooler, S. Zhang, P. A. Adderley, J. F. Benesch, D. B. Bullard, Jean R. Delayen, J. M. Grames, J. Guo, F. E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, Geoffrey A. Krafft, M. A. Mamun, M. Poelker, R. Suleiman, M.G. Tiefenback, Y.W. Wang, S.A.K. Wijethunga

Physics Faculty Publications

A high current, high charge magnetized electron beamline that has been under development for fast and efficient cooling of ion beams for the proposed Jefferson Lab Electron Ion Collider (JLEIC). In this paper, we present the latest progress over the past year that include the generation of picosecond magnetized beam bunches at average currents up to 28 mA with exceptionally long photocathode lifetime, and the demonstrations of magnetized beam with high bunch charge up to 700 pC at 10s of kHz repetition rates. Detailed studies on a stable drive laser system, long lifetime photocathode, beam magnetization effect, beam diagnostics, and …

Space Charge Study Of The Jefferson Lab Magnetized Electron Beam, Sajini A.K. Wijethunga, J. F. Benesch, Jean R. Delayen, F. E. Hannon, C. Hernandez-Garcia, Geoffrey A. Krafft, M. A. Mamun, M. Poelker, R. Suleiman, S. Zhang

Physics Faculty Publications

Magnetized electron cooling could result in high luminosity at the proposed Jefferson Lab Electron-Ion Collider (JLEIC). In order to increase the cooling efficiency, a bunched electron beam with high bunch charge and high repetition rate is required. We generated magnetized electron beams with high bunch charge using a new compact DC high voltage photo-gun biased at -300 kV with alkali-antimonide photocathode and a commercial ultrafast laser. This contribution explores how magnetization affects space charge dominated beams as a function of magnetic field strength, gun high voltage, laser pulse width, and laser spot size.

Compact Srf Linac For High Brilliance Inverse Compton Scattering Light Source, Kirsten E. Deitrick, Jean R. Delayen, Geoffrey A. Krafft, Balša Terzić

Physics Faculty Publications

New designs for compact SRF linacs can produce micron-size electron beams. These can can be used for inverse Compton scattering light sources of exceptional flux and brilliance.

Spectra Of One – And Two Photon Excited Luminescence Of Medical Drugsin Photon Traps, A.K. Kubanov, D.I. Semenov

Scientific Journal of Samarkand University

A technique for studying the photoluminescence spectra of pharmaceuticals (analgin, paracetamol) was developed for single- and two-photon excitation by a pulse-periodic laser. The technique is based on the fiber-optic recording of photoluminescence spectra using a small-size spectrometer, quartz light guides, and mini cavity cuvettes, which makes it possible to compare the analyzed spectrum with the spectrum of the reference substance.