Physical Sciences and Mathematics Commons^™

The Simulation, Design, And Fabrication Of Optical Filters, John-Michael Juneau

Graduate Theses - Physics and Optical Engineering

The purpose of this thesis is to create a model for designing optical filters and a method for fabricating the designed filters onto a multitude of substrates, as well as to find ways to optimize this process. The substrates that were tested were quartz, glass slides, polycarbonate, and polyethylene terephthalate (PET). This work will account for variations in the deposition process and substrate cleaning method, in order to optimize the performance of the final optical filter. Several different filters were simulated and then fabricated. These filters included 3, 5, and 7-layer Bragg reflectors, 11-layer narrowband filters, and some variations of …

Integrated Environment And Proximity Sensing For Uav Applications, Shawn S. Brackett

Electronic Theses and Dissertations

As Unmanned Aerial Vehicle (UAV), or “drone” applications expand, new methods for sensing, navigating and avoiding obstacles need to be developed. The project applies an Extended Kalman Filter (EKF) to a simulated quadcopter vehicle though Matlab in order to estimate not only the vehicle state but the world state around the vehicle. The EKF integrates multiple sensor readings from range sensors, IMU sensors, and radiation sensors and combines this information to optimize state estimates. The result is an estimated world map to be used in vehicle navigation and obstacle avoidance.

The simulation handles the physics behind the vehicle flight. As …

Simulating Magnetospheres With Numerical Relativity: The Giraffe Code, Maria Babiuc-Hamilton

Maria C. Babiuc-Hamilton

Numerical Relativity is successful in the simulation of black holes and gravitational waves. In recent years, teams have tackled the problem of the interaction of gravitational and electromagnetic waves. We developed a new code for the numerical simulation of neutron and black hole magnetospheres, using the FFE formalism. We tested the performance of the new code named GiRaFFE, in 1D and 3D test suits. We will study magnetospheres, focusing on jets by the Blandford -Znajek mechanism.

On The Simulation And Mitigation Of Anisoplanatic Optical Turbulence For Long Range Imaging, Russell C. Hardie, Daniel A. Lemaster

Russell C. Hardie

We describe a numerical wave propagation method for simulating long range imaging of an extended scene under anisoplanatic conditions. Our approach computes an array of point spread functions (PSFs) for a 2D grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. To validate the simulation we compare simulated outputs with the theoretical anisoplanatic tilt correlation and differential tilt variance. This is in addition to comparing the long- and short-exposure PSFs, and isoplanatic angle. Our validation analysis shows an …

Simulation Of Anisoplanatic Imaging Through Optical Turbulence Using Numerical Wave Propagation With New Validation Analysis, Russell C. Hardie, Jonathan D. Power, Daniel A. Lemaster, Douglas R. Droege, Szymon Gladysz, Santasri Bose-Pillai

Russell C. Hardie

We present a numerical wave propagation method for simulating imaging of an extended scene under anisoplanatic conditions. While isoplanatic simulation is relatively common, few tools are specifically designed for simulating the imaging of extended scenes under anisoplanatic conditions. We provide a complete description of the proposed simulation tool, including the wave propagation method used. Our approach computes an array of point spread functions (PSFs) for a two-dimensional grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. The degradation …

Characterization Of Reactor Background Radiation At Hfir For The Prospect Experiment, Blaine Alexander Heffron

Masters Theses

This work describes an investigation of the background radiation present at the High Flux Isotope Reactor (HFIR) on behalf of the PROSPECT collaboration. The PROSPECT experiment is designed to make a precision measurement of the antineutrino spectrum at HFIR and search for sterile neutrinos. Temporal and spacial variation of neutron and gamma backgrounds at the experiment site for the PROSPECT detector are measured in order to determine if the reactor correlated radiation will contribute a significant background to the inverse beta decay signal. Knowledge of spacial background variation will also be used to inform the design of a local shield …

On The Simulation And Mitigation Of Anisoplanatic Optical Turbulence For Long Range Imaging, Russell C. Hardie, Daniel A. Lemaster

Electrical and Computer Engineering Faculty Publications

We describe a numerical wave propagation method for simulating long range imaging of an extended scene under anisoplanatic conditions. Our approach computes an array of point spread functions (PSFs) for a 2D grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. To validate the simulation we compare simulated outputs with the theoretical anisoplanatic tilt correlation and differential tilt variance. This is in addition to comparing the long- and short-exposure PSFs, and isoplanatic angle. Our validation analysis shows an …

Trim Tuning Of Sps-Series Dqw Crab Cavity Prototypes, S. Verdú-Andrés, J. Skaritka, Q. Wu, A. Ratti, S. Baurac, C. H. Boulware, T. Grimm, J. Yancey, W. Clemens, E. A. Mcewen, H. Park

Physics Faculty Publications

The final steps in the manufacturing of a superconducting RF cavity involve careful tuning before the final welds to match the target frequency as fabrication tolerances may introduce some frequency deviations. The target frequency is chosen based on analysis of the shifts induced by remaining processing steps including acid etching and cool down. The baseline fabrication of a DQW crab cavity for the High Luminosity LHC (HL-LHC) envisages a first tuning before the cavity subassemblies are welded together. To produce a very accurate final result, subassemblies are trimmed to frequency in the last machining steps, using a clamped cavity assembly …

Electrodynamical Modeling For Light Transport Simulation, Michael G. Saunders

Undergraduate Honors Theses

Modernity in the computer graphics community is characterized by a burgeoning interest in physically based rendering techniques. That is to say that mathematical reasoning from first principles is widely preferred to ad hoc, approximate reasoning in blind pursuit of photorealism. Thereby, the purpose of our research is to investigate the efficacy of explicit electrodynamical modeling by means of the generalized Jones vector given by Azzam [1] and the generalized Jones matrix given by Ortega-Quijano & Arce-Diego [2] in the context of stochastic light transport simulation for computer graphics. To augment the status quo path tracing framework with such a modeling …

Simulation Of Anisoplanatic Imaging Through Optical Turbulence Using Numerical Wave Propagation With New Validation Analysis, Russell C. Hardie, Jonathan D. Power, Daniel A. Lemaster, Douglas R. Droege, Szymon Gladysz, Santasri Bose-Pillai

Electrical and Computer Engineering Faculty Publications

We present a numerical wave propagation method for simulating imaging of an extended scene under anisoplanatic conditions. While isoplanatic simulation is relatively common, few tools are specifically designed for simulating the imaging of extended scenes under anisoplanatic conditions. We provide a complete description of the proposed simulation tool, including the wave propagation method used. Our approach computes an array of point spread functions (PSFs) for a two-dimensional grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. The degradation …

Long-Term Simulations Of Beam-Beam Dynamics On Gpus, B. Terzić, K. Arumugam, R. Majeti, C. Cotnoir, M. Stefani, D. Ranjan, A. Godunov, V. Morozov, H. Zhang, F. Lin, Y. Roblin, E. Nissen, T. Satogata

Physics Faculty Publications

Future machines such as the electron-ion colliders (JLEIC), linac-ring machines (eRHIC) or LHeC are particularly sensitive to beam-beam effects. This is the limiting factor for long-term stability and high luminosity reach. The complexity of the non-linear dynamics makes it challenging to perform such simulations which require millions of turns. Until recently, most of the methods used linear approximations and/or tracking for a limited number of turns. We have developed a framework which exploits a massively parallel Graphical Processing Units (GPU) architecture to allow for tracking millions of turns in a sympletic way up to an arbitrary order and colliding them …

Monitoring Akkuyu Nuclear Reactor Using Antineutrino Flux Measurement, Sertaç Öztürk, Aytül Adigüzel, Veysi̇ Erkcan Özcan, Nafi̇z Gökhan Ünel

Turkish Journal of Physics

We present a simulation-based study for monitoring Akkuyu nuclear power plant's activity using antineutrino flux originating from the reactor core. A gadolinium-doped water Cherenkov detector was designed and optimization studies were performed using the Geant4 simulation toolkit. It was found that the bottom (or top) face of the target should be instrumented by six 10-inch-diameter photomultiplier tubes with photon detection efficiency of about 35% and the optimum Gd concentration was found to be about 0.3%-0.5%. The first study on the design of a monitoring detector facility for Akkuyu nuclear power plant is discussed in this paper.