Physical Sciences and Mathematics Commons^™

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead-Alloys Coolant Systems, Yitung Chen

Transmutation Sciences Materials (TRP)

The goal of the proposed research project is to provide basic understanding of the protective oxide layer behaviors and to develop oxide layer growth models of steels in non-isothermal lead-alloys (lead or lead-bismuth eutectic) coolant systems. It is widely recognized that the corrosiveness of the lead-alloys is a critical obstacle and challenge for which it can be safely used or applied in the nuclear coolant systems. Active oxygen control technique can promote the formation of the “self-healing” oxide films on the structural material surface, drastically reducing steel corrosion and coolant contamination. Many experiments of steels exposed to flowing lead-alloys have …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry, Morphology, And Surface Preparation: Quarterly Report (October-December 2004), Allen L. Johnson, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

This project has four components:

(1) the fabrication of a materials test apparatus with unique capabilities,

(2) comparative studies of steel corrosion under gas phase conditions comparable to the Lead Bismuth Eutectic (LBE) oxygen control conditions,

(3) isotope labeling studies, and

(4) collaborative efforts with other workers in the field.

Electrochemical Behaviours Of Hemoglobin-Ddab-Modified Powder Microelectrode And The Application Of The Powder Microelectrode In Determination Of Nitric Oxide, Zhi-Mou Guo, Huan Liu, Jian Chen, Wen-Ting Zhang

Journal of Electrochemistry

The electrochemical behaviours of DDAB-Hb-PME were studied in this paper. The (apparent) surface concentration of Hb was enhanced greatly by using the powder microelectrode (technique). NO reacts with Hb and absorbs on the surface of the modified carbon powder. Therefore, the output of the electrode was enhanced greatly by employing PME with higher reaction surface (area). The sensitivity of DDAB-Hb-PME is 3.1 mA/μmol·L~(-1)·cm~(2), which is much larger than the values obtained with the traditional electrodes. The detection limit is 9 nmol·L~(-1) and the linear response range is 9～100 nmol·L~(-1).

Electrochemical Investigations On Pitting Susceptibility Of Iron-Based Alloy, Wei-Shan Li, Hong-Yu Chen, Zhong-Zhi Yuan, Hong Li, Qi-Ming Huang, Dong-Sheng Lv

Journal of Electrochemistry

The formation process of passive film on iron and electronic properties and pitting susceptibility of an iron-based alloy are investigated by using linear potential sweep, alternative current impedance and electrochemical nose technologies. The relationship between reciprocal square capacitance and potential following the Mott-Schottky behavior is limited at a narrow rang of low potentials. At higher potentials, linear relationship between reciprocal capacitance and potential is obtained, which is ascribed to the increasing thickness of the passive film with potential. The donor density of the passive film is influenced by the formation potential of the film, passivator and microstructure. The decrease in …

Preparation And Photo-Catalyst Properties Of The Α-Fe_2o_3-Tio_2 Films On Sodium Alginate Polymer, Li-Qin Chen, Huai-Zhen Zhong, Ri-Yao Chen, Xi Zheng, Zhen Chen

Journal of Electrochemistry

Three new nano thin films of α-Fe_2O_(3)、TiO_2 and α-Fe_2O_(3)-TiO_2 by doping their powder with sodium alginate polymer were prepared. Surface structure and catalytic activities of the films were characterized by FTIR、XRD、PL、TEM and I-V techniques. The results of UV-visible absorption showed that the methylene blue was mineralized in aqueous of α-Fe_2O_(3)/SA、TiO_2/SA and (α-(Fe_2O_(3)))-TiO_2 /SA upon radiation with ultra violet light. α-Fe_2O_(3) enhanced their photo-decolorized-activities by doping 15% TiO_2.

Effect Of Fe~(3+) Dopen Of Titanium Dioxide Film On Absorption Spectra And Photo Catalysis, Mei-Qun Xiao, Jia-Nian Shen, Moucheng Li, Peng-Fei Wu, Dong Liu, Yu-Juan Zhang

Journal of Electrochemistry

Photo-catalytic titanium dioxide film in nano crystalline has been prepared by electrochemical oxidation process and adding different amount of ferric ion into the electrolyte during the anodic oxidation.The effects of Fe~(3+) dopen on absorption spectra and photo-catalytic of the titanium dioxide films have been studied. It shows that the Fe~(3+) dopen caused the red shife of the absorption edge for the incoming light and exhibited the improved photocatalytic reactivity.

Studies On The Electrochemical Preparation And Electrochemical Properties Of Conducting Polymers——Brief Introduction To The Research Work Of Electrochemistry Of Conducting Polymers In Cas Key Laboratory Of Organic Solids(I), Yong-Fange Academy Of Sciences Li

Journal of Electrochemistry

Conducting polymers have drawn much attention since the discovery of conducting polyacetylene in 1977, due to the novelty and curiosity of their structure and properties as well as their promising applications in many aspects. Among the studies of conducting polymers, the electrochemical preparation and electrochemical properties of conducting polymers are of special importance, because the electropolymerization is a main method for preparing conducting polymer films and the electrochemical properties are the basis for their applications in the fields of electrode materials for batteries, electrocatalysis, electrochromic display, etc. We are one of the earliest research groups in the world to perform …

Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma

Journal of Electrochemistry

The air electrodes with different mass ratio of Pt/active carbon or carbon nanotube as catalyst layer material have been prepared. The electrocatalytic performances for oxygen reduction were evaluated by means of polarization curve and electrochemical impedance spectroscopy (EIS). The results disclosed that carbon nanotubes dealt with nitric acid in the catalyst layer had been improved obviously on the electrocatalytic activity. After the surface of carbon nanotube was oxygenated and aggraded with platinum, the catalyst had obviously effects on the electrocatalytic activity. The air electrode with the mass ratio of active carbon to Pt/carbon nanotube in 4∶1 showed better electrocatalytic activity, …

The Investigation Of Bafesi/C Alloy Composite As Anode Materials For Li-Ion Battery, Rui-Xiang Feng, Hua Dong, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

A novel BaFeSi/C composite was prepared by mechanical ball milling, and lithium insertion reactions on the composite electrode were investigated by cyclic voltammetry ,charge-discharge measurements, XRD and XPS spectroscopy. It is demonstrated that the capacity retention with indiscernible capacity decas during charge-discharge cycling. The improved cycling ability of the composite is suggested from a cooperative action by inactive FeSi_(2 )and BaSi_2 matrix and outer graphite shell, which both buffer the volumetric changes of the active Si phase and provide a good connection for electronic and ionic conduction during lithium insertion and extraction processes.

Lico_(X)Ni_(1-X)O_2 Cathode Materials Prepared By Electrolysis Of Co And Ni, Jin-Ping Wei, Xin Sun, Xiao-Yu Wang, Xi-Kui Bian, Jin-Ling Zhai, Yan-Jie Yan-Jie

Journal of Electrochemistry

A new electrolytic method was developed to prepare LiCo_(x)Ni_(1-x)O_2 as a cathode material of lithium-ion battery. Contrary to the traditional method, electrolytic method is a potential method with simple process to industrialization and no pollution. Metal cobalt and nickel were electrolysed in parallel to prepare the precursor of Co_( x )Ni_(1- x )(OH)_2.Different compositional precursors could be conveniently prepared by changing electrolytic current. The LiCo_(0.3)Ni_(0.7)O_2 cathode prepared by this method was found favorable charge-discharge and cycle properties. For the LiCo_(0.3)Ni_(0.7)O_(2 )cathode material, the discharge capacities in the 1st and 50th cycles were 163 mAh/g and 140 mAh/g with charge retention …

Study On Mass Transport In Liquid Layer Adjacent To The Electrode Through Transmission Vop-Spectroellipsometry, Wei Zhu, Yangyu-Ru Yangyu-Ru, Zong-Qing Huang

Journal of Electrochemistry

In electrochemical system, the mass transport process in liquid layer adjacent to electrode is studied through theoretical analysis only.The diffusion process can be analyzed theoretically by Fick's law for homogeneous media. Up to now, none of satisfied experimental method has been reported for studying mass transport of a whole process in liquid media yet. This paper described the experimental approach to explore mass transport in electrochemical system by transmission Vop-spectroellipsometry briefly.

Improvement And Its Mechanism Of Storage Performance Of Ni-Mh Battery, Xiao-Feng Li

Journal of Electrochemistry

The storage performance of nickel-metal-hydride (Ni-MH) battery was studied by using galvanostatic charge-discharge and cyclic voltammetry. The experimental results indicated that CoOOH could not be completely restored after its being thoroughly reduced at lower potential, which might weaken electric conduction network in the positive electrode and result in fading of electrochemical properties of Ni-MH battery. Addition of nickel powder as a conductive agent into the positive electrode was beneficial to the capacity recovery after storage.

Preparation And Electrochemical Magnesium Insertion Behaviors Of Mgv_2o_6, Hua-Tang Yuan, Li-Fang Jiao, Jian-Sheng Cao, Xiu-Sheng Liu, Ming Zhao, Yong-Mei Wang

Journal of Electrochemistry

MgV_2O_6was synthesized by conventional solid-state reaction from MgO and V_2O_(5)as starting materials. X-Ray diffraction analysis showed that the prepared sample belongs to the monoclinic structure. Electrochemical magnesium insertion from aprotic electrolytes such as organomagnesium halides into this host was found possible and exhibited charge/discharge circulation.

Applications Of New Activated Carbon Meterials In The Electric Double-Layer Capacitor, Jian-Jun Zhang

Journal of Electrochemistry

A new type activated carbon whose precursor was coconut shell could be obtained using specific physics-chemistry activation, and the activated carbon was applied as the material of electrode in EDLC(electrical double-layer capacitor),which had a large specific capacitance,and could charge and discharged in some large currents. Carbon dioxide and acid were used to modify carbon,and the effects of post-treatment on surface area and pore volume were investigated. A moulding method which has influence on some properties of carbon electrode with PTFE additive was researched in the paper.

Additive-Assisted Cerium-Based Electrolytic Coating Process For Corrosion Protection Of Aluminum Alloys, James O. Stoffer, Thomas J. O'Keefe, Eric L. Morris, Scott Hayes, Paul Yu, Alex Williams, Xuan Lin

Chemistry Faculty Research & Creative Works

The corrosion resistance of an aluminum or aluminum alloy component is enhanced by immersing an aluminum alloy to act as a cathode and an oxygen-evolving anode in an electrolyte comprising water, cerium ions, and an additive selected from among animal gelatin, derivatives of animal gelatin, and amino acids, then passing an electrical current through the electrolyte to deposit a cerium-based coating onto the aluminum-based component.

Surface Structure Of Alkylsilylated Hzsm-5 As Phase-Boundary Catalyst, Hadi Nur, Yun Hau Ng, Mohd Nazlan Mohd Muhid, Halimaton Hamdan

Yun Hau Ng

The need for cleaner environment concerns motivates the development of more efficient catalytic system. Based on this consideration, recently a novel catalyst named "Phase-boundary catalyst", a bimodal amphiphilic solid catalyst, was proposed. It was demonstrated that the catalytic system containing phase-boundary catalyst required neither stirring to make an emulsion nor addition of a co-solvent to make a homogeneous solution to drive the reaction. The driving force that has prompted this paper is to investigate the surface structure of alkylsilylated HZSM-5 as phase-boundary catalyst. Temperature Programmed Desorption (TPD) of ammonia and, 13C and 29Si MAS NMR spectroscopy were used to elucidate …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Final Progress Report (September 2003 – August 2004), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this task is to evaluate the tensile properties of three martensitic alloys namely, Alloys EP-823, HT-9 and 422 at temperatures relevant to the transmutation processes. Testing has been performed to evaluate the tensile properties of all three alloys at temperatures ranging from ambient to 600^°C. The test materials were thermally-treated (quenched and tempered) prior to the evaluation of their tensile properties. The deformation characteristics of these tensile specimens, upon completion of testing, were evaluated by scanning electron microscopy (SEM). Efforts were also made to identify and characterize defects such as dislocations using transmission electron microscopy …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (June 01 – August 31, 2004), Ajit K. Roy

Transmutation Sciences Materials (TRP)

Highlights of Test Results:

• Residual stress measurements by the RC method on cold-worked specimens showed tensile residual stresses in austenitic stainless steel. However, compressive residual stresses were observed in martensitic stainless steel. This difference may be attributed to the difference in metallurgical phases and microstructures resulting from different thermal treatments imparted to them.

• Residual stress measurements by both ND and RC techniques on welded specimens showed similar patterns. Welded specimens consisting of similar material showed tensile residual stresses in the vicinity of the fusion line (FL). However, welded specimens consisting of dissimilar materials (austenitic and martensitic stainless steel …

Computational Approaches To The Design And Analysis Of Stability Of Polypeptide Multilayer Thin Films, Bin Zheng

Doctoral Dissertations

The focus of this research is the development of computational approaches to understanding the physical basis of layer-by-layer assembly (LBL), a key methodology of nanomanufacturing. The results provided detailed information on structure which cannot be obtained directly by experiments.

The model systems chosen for study are polypeptide chains. Reasons for this are that polypeptides are no less polyelectrolytes than the more usual polyions, and one can control the primary structure of a polypeptide on a residue-by-residue basis using modern synthetic methods. Moreover, as peptides constitute one of the four major classes of biological macromolecules, research in this direction is expected …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Trp Final Report 09/01/2003-08/31/2004, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 06/01/2004-08/31/2004, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Preparation And Electrochemical Performance Of New Composite Seperators For Lithium-Ion Batteries, Hu Cheng, Hong-Yan Du, Yong Yang

Journal of Electrochemistry

New composite seperators for lithium ion batteries were prepared by coating PEO mixed with nanosize SiO_(2)onto microporous polypropylene(PP) seperators. Highly conductive electrolytes were prepared by soaking them in an electrolyte solution. With these composite separators, the lithium ion cell consisting of Li anode and LiNi_(0.8)Co_(0.2)O_(2)cathode were assembled. The high initial discharge capacity and good capacity retention were obtained through the cell.

The Electrochemical Behavior And Determination Of Gsh At The Powder Microelectrode, Jian Chen, Zhong-Yu He, Chuansin Cha, Huan Liu

Journal of Electrochemistry

In this paper, the electrochemical behavior of GSH at the surface of platinum(Pt) electrode, glass carbon(GC) electrode and acetylene black packed powder microelectrode (AB-PME) was studied. It was found that the electrochemical oxidations of GSH at both Pt and GC electrode were highly irreversible. No current peak or current plateau could be observed from the CV curves. The direct electro-oxidation of GSH at carbon surface was achieved by using the PME technique.In this case, the apparent reversibility of GSH oxidation was enhanced significatly .The overpotential of GSH oxidation was reduced to 0.5 V at the surface of AB-PME compared with …

Studies On The Electrochemical Behavior Of Copper Paratolysulfate And Its Complexes, Ji-Guo Song, Pei-Kang Shen

Journal of Electrochemistry

Copper (II) paratolysulfate has been synthesized and characterized by thermo-gravimetric (TG) measurements and differential scanning calorimetric (DSC) analysis. This salt can easily lose all crystal water and the dehydrated salt does not deliquesce in the air. It is found for the first time that the complex of Cu(p-OTs)_(2)/ethanolamine(1∶1) can catalyze the oxidation of 1,1′-bi-2-naphthol in DMSO and DMF, while the process is difficult to perform in H_(2)O and CH_(3)OH. The electrochemical behaviors of both Cu(p-OTs)_(2) and its complexes with ethanolamine have been studied on platinum electrode in DMSO, DMF, (CH_(3)OH) and H_(2)O respectively. The complexes of various copper salts with …

Nucleation And Crystal Growth Of Pt Electrodeposition On Poly Crystal Au Microdisc Electrode, Zhi-Yong Tao, Pei-Fang Liu

Journal of Electrochemistry

Based on the Fleischmann's model of nucleation and crystal growth for electrodeposition combined with the Barradas-Bosco's adsorption-nucleation model for electrochemical phase formation, the chronoamperometry was well fitted for Pt deposition on polycrystalline Au micro disc electrodes (30 μm in diameter) in different H_(2)PtCl_(6) concentrations at different over-potentials. The initial stage of Pt deposition in dilute H_(2)PtCl_(6) could be interpreted by the model of H_(2)PtCl_(6 ) adsorption combined with instantaneous nucleation and two-dimensional cylindrical growth. The rate constant of the two-dimensional growth increased linearly with overpotential. Then the deposit grew layer by layer and the rate constant increased non-linearly with overpotential. …

Electrochemical Reduction Of Nitrobenzene On The Wc Electrode In Acidic Solution, Chun-An Ma

Journal of Electrochemistry

The tungsten carbide (WC) electrode was constructed by using polyterafluoroethylene as binder. The electrochemical behavior of nitrobenzene on the WC electrode in acidic solution was investigated by cyclic voltammetry, linear scan method and chronoamperometry. Experimental results showed that WC electrode had good activity for the electrochemical reduction of nitrobenzene, and the electrode process was controlled by diffusion and electrochemical stepssimultaneously. The apparent active energy of the electrode process is 23.7kJ mol~(-1), while the active energy of the electrochemicalstep is 10.91kJ mol~(-1).

Synthesis Of (S)-3-Phenylpropane-2-Tert-Butoxycarbonylamino- 1-Thiol And Its Electrochemical Behavior Self-Assembled On Gold, Sun Ru

Journal of Electrochemistry

The synthesis of (S)-3-Phenylpropane-2-tert-butoxycarbonylamino- 1-thiol(N-Boc-APT) from L-phenylalanine was reported. L-Phenylalanine was reduced to the corresponding amino alcohol, protection of the amino group using tert-butyl pyrocarbonate gave (S)-2-tert-butoxycarbonylamino-3-phenylpropane-1-ol, which was then O-mesylated and treated with potassium thioacetate in DMF to give 3-phenylpropane-2-tert- butoxycarbonylamino-1-etylmercapto. After the acetyl group was removed with ammonia in alcohol, the desired target molecular was obtained. The structure of intermediate and target molecular was conformed by IR and ~(1)HNMR. We made N-Boc-APT self-assemble-modificated gold electrode and investigated its electrochemical behavior. The CV results of methylene blue on nano-Au/N-Boc-APT SAM/Au electrode showed that nano-Au could speed this electron transfer …

Effects Of Barium On The Performance Of Secondary Alkaline Zinc Electrode, Yi Zheng, Jian-Ming Wang

Journal of Electrochemistry

The active material of secondary alkaline zinc electrode with barium additives was prepared by a chemical reaction method and characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The electrochemical performance of various pasted Zn electrodes was investigated by cyclic voltammetry, charge/discharge method and electrochemical impedance spectra (EIS) technology. The addition of barium can synthesize a compound barium zincate with the molecular structure of BaZn(OH)_(4)· xH_(2)O and improve the discharge performance. The EIS of the various Zn electrodes showed two time constants besides diffusion impedance, including a state variable representing the covering degree of discharge products on the electrode …

Solid State Synthesis And Electrocatalysis Of Pt/Moo_3 For The Oxidation Of Methanol, Wang Qing

Journal of Electrochemistry

The electrocatalyst, Pt/MoO_(3) synthesized by solid state reaction, was used for the oxidation of methanol in direct methanol fuel cells. The X-Ray diffraction and cyclic voltammetry were employed to investigate the performance of the material. It was shown that the typical diffraction peaks for Pt appeared in XRD. And a good electrocatalysis for methanol oxidation was observed. The peak potential of the methanol oxidation appeared at ca. 0.63V(vs.SCE) and the peak current density for the oxidation was 78.1 mA cm~(-2) .

Synthesis And Electrochemical Behavior Of Layered-Structure Limn_(1-X)Cr_Xo_2, Jie Xiao, Hui Zhan, Yun-Hong Zhou

Journal of Electrochemistry

The Layered-structure LiMn_(1-x)Cr_xO_(2 )(x=0,0.15) solid solution has been prepared by the rheological phase method. From the XRD results, undoped LiMnO_(2) crystallized almost entirely in the orthorhombic phase while the structure of LiMn_(0.85)Cr_(0.15)O_(2) belongs to monoclinic phase. TEM investigation shows that the final powder product consists of ultrafine spherical particles which are distributed homogeneously, with the average diameter ranging from 60 to 300nm. The initial discharge capacity of LiMn_(0.85)Cr_(0.15)O_(2) is much higher than that of undoped LiMnO_(2). After 40 cycles, the capacity retention for m-LiMn_(0.85)Cr_(0.15)O_(2 )is 94% at the current rate of 50mA/g under room temperature. The results of electrochemistry tests …