Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

2003

Institution
Keyword
Publication
Publication Type

Articles 1 - 30 of 116

Full-Text Articles in Physical Sciences and Mathematics

Prediction Of Dopant Ionization Energies In Silicon: The Importance Of Strain, A. Rockett, Duane D. Johnson, S. V. Khare, B. R. Tuttle Dec 2003

Prediction Of Dopant Ionization Energies In Silicon: The Importance Of Strain, A. Rockett, Duane D. Johnson, S. V. Khare, B. R. Tuttle

Duane D. Johnson

Based on a hydrogenic state and strain changes upon defect charging, we propose a simple, parameter-free model that agrees well with the observed group III and V monovalent-impurity ionization energies in Si, revealing the importance of such strain effects. Changes in lattice strain upon defect charging are obtained via superposition and elasticity theory using atomic relaxations from density functional theory.

Go to article

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 09/01/2003-11/30/2003, Samir Moujaes, Yitung Chen Nov 2003

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 09/01/2003-11/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Go to article

Optimizing Catalyst Layer Composition Of Pemfc By Orthogonal Method, Ming-Hua Wang, Xin-Jian Zhu, Guang-Yi Cao, Sheng Sui, Qing-Chun Yu, Ming-Ruo Hu, Zheng-Yu Fan Nov 2003

Optimizing Catalyst Layer Composition Of Pemfc By Orthogonal Method, Ming-Hua Wang, Xin-Jian Zhu, Guang-Yi Cao, Sheng Sui, Qing-Chun Yu, Ming-Ruo Hu, Zheng-Yu Fan

Journal of Electrochemistry

The optimal composition of catalyst layer in a PEMFC electrode was studied through orthogonal method. It was showed that the performance of hydrophilic electrodes, in which there is no PTFE in the catalyst layer, were more favorable than that of hydrophobic electrodes. According to this condition, the power density of PEMFC attained 0.37 w·cm-2 when the Nafion loading was 1.4 mg·cm-2, and the Pt loading was 0.4 mg·cm-2 in the catalyst layer, using H2 as fuel and air as oxidant both at atmospheric pressure. Additionally, the results showed that increasing Pt loading in Pt/C catalyst was a reasonable way to …

Go to article

Study On The Gas Generation In Different Charging Voltage During Formation Process In Polymer Lithium-Ion Battery, Li Huang, Ming-Gang Jin, Hui-Qun Cai, Ming-Sen Zheng, Quan-Feng Dong, Jin-Kua You, Zu-Geng Lin Nov 2003

Study On The Gas Generation In Different Charging Voltage During Formation Process In Polymer Lithium-Ion Battery, Li Huang, Ming-Gang Jin, Hui-Qun Cai, Ming-Sen Zheng, Quan-Feng Dong, Jin-Kua You, Zu-Geng Lin

Journal of Electrochemistry

The gases of polymer lithium_ion battery(PLI) generated under different voltages during the first charging process were examined by means of gas chromatography (GC), and the mechanism of the gas generation was discussed. The electrolyte used in batteries was 1 mol/L LiPF6_EC～DMC～EMC=1∶1∶1(in volume). The results showed that when the charging voltage is less than 2.5 V, the main component of generated gases are H2 and CO2, and when the charging voltage is 2.5 V, EC begins to decompose. Due to the decomposition of EC, the main generated gas is C2H4 when the charge voltages between 3.0 V and 3.5 V. As …

Go to article

Pitting Characteristics Of Cu-50/60ni Alloys In Nacl Solution, Jie Li, Yan Niu, Shi-Zhe Song Nov 2003

Pitting Characteristics Of Cu-50/60ni Alloys In Nacl Solution, Jie Li, Yan Niu, Shi-Zhe Song

Journal of Electrochemistry

The pitting behavior of nanocrystalline Cu_50/60Ni and cast Cu_50/60Ni alloys in different concentration of NaCl solutions has been investigated using various electrochemical methods.A logarithmic dependence of the passive breakdown potential (Eb),which is established using dynamic potential scan technic,on the chloride concentration was obtained for both alloys.The study on pitting propagation of both alloys was carried out using potential step chronocurrent method.As long as pits initiate on both alloys,the pits on nanocrystalline Cu_Ni alloys develop faster than those on cast alloys.

Go to article

Electrochemical And In-Situ Scanning Tunneling Microscopy Studies On The Sb Underpotential Deposition On Cu Single Crystal Electrodes, Ji-Hong Wu, Jia-Wei Yan, Jing Tang, Wen-Yun Hu, Bing-Wei Mao Nov 2003

Electrochemical And In-Situ Scanning Tunneling Microscopy Studies On The Sb Underpotential Deposition On Cu Single Crystal Electrodes, Ji-Hong Wu, Jia-Wei Yan, Jing Tang, Wen-Yun Hu, Bing-Wei Mao

Journal of Electrochemistry

We report electrochemical and in_situ STM studies on Sb UPD onto Cu(111) and Cu(100) electrode surfaces in HClO4 and H2SO4 solutions. The results indicate that the electrode surface structure as well as anion can considerably influence Sb UPD. Sb UPD on Cu(100) forms open adlayer structures, which is accompanied by surface alloying due to the more open structure of the (100) surface, On Cu(111), a more compact Sb adlayer is formed instead. Anion adsorption influences the dynamics as well as the adlayer structure of Sb UPD. Owing to the strong adsorption of SO42-, the UPD of Sb on Cu(111) in …

Go to article

Preparation And Characterization Of Y-Type Carbon Nanotubes By Using Anodized Alumina Oxide (Aao) Template, Jing Zhang, Quan-Yong Gao, Yong Yang Nov 2003

Preparation And Characterization Of Y-Type Carbon Nanotubes By Using Anodized Alumina Oxide (Aao) Template, Jing Zhang, Quan-Yong Gao, Yong Yang

Journal of Electrochemistry

In this work, potential_modulation method was used in two_step anodization process to make an AAO template with Y_type nanochannels. Then Y_type carbon nanotubes with controlled length and branch angle were prepared in the template based on chemical vapor decomposion (CVD) method with Co particles as catalyst and C2H2 as carbon source. The Y_type nanotube branches exhibit the angle distribution ranging from 20° to 120°. The results demonstrated that the oxidation potential should be responsible for the angles and length of the branches. Short pulse and high oxidation potential will result in the short and dense nanotube branches.

Go to article

Application Of Hydrogen-Storage Alloy Electrode In Electrochemical Reduction Of Glucose, Hui Chen, You-Gen Tang, Zheng Tang Nov 2003

Application Of Hydrogen-Storage Alloy Electrode In Electrochemical Reduction Of Glucose, Hui Chen, You-Gen Tang, Zheng Tang

Journal of Electrochemistry

Electrolysis of glucose was performed at constant potential using hydrogen_storage alloy as catalytic reduction electrode. It was found that the superficial treatment and activation of hydrogen_storage alloy powder had obvious effects on improving the current efficiency of sorbitol. Under the optimums, current efficiency of sorbitol by electrolyzing glucose was over 94%. The yield of sorbitol was over 80%, the lifespan of electrode was tested and analyzed, the ways of regeneration were discussed.

Go to article

The Study Of Green Corrosion Inhibitors For Mild Steel 907 In Natural Seawater Environment, Ping Gong, Min Du, Qing-Zhang Wang, Zhen-Jun Mu Nov 2003

The Study Of Green Corrosion Inhibitors For Mild Steel 907 In Natural Seawater Environment, Ping Gong, Min Du, Qing-Zhang Wang, Zhen-Jun Mu

Journal of Electrochemistry

Nine green compounds,including calcium gluconate,zinc gluconate,zinc sulfate,garlic,ACUSOL 445N,OS_15,APG,OCTA and STPP were selected according to the methods of molecule design and function groups prune. The functions of combined corrosion inhibitors mixed by the compounds mentioned above for mild steel in seawater were studied in this work using the methods of polarization curve and weight_loss.The best weight ratio and distinct synergistic effect of calcium gluconate,zinc sulfate and OCTA were studied by Latin experiment. The afgereffects of the best weight ratio corrosoin inhibitor were studied by subsection experiment. In this way, a kind of high effect green corrosion inhibitor was obtained.

Go to article

The Study On Carbon Nanotube-Loaded Pt Catalysts For Proton Exchange Membrane Fuel Cells, Hong Zhu, Feng-Juan Ge, Xiao-Hong Kang, Yu-Guo Yang, Yun-Hua Xu Nov 2003

The Study On Carbon Nanotube-Loaded Pt Catalysts For Proton Exchange Membrane Fuel Cells, Hong Zhu, Feng-Juan Ge, Xiao-Hong Kang, Yu-Guo Yang, Yun-Hua Xu

Journal of Electrochemistry

Carbon nanotube_supported_platinum (Pt/CNTs) and carbon_supported_platinum (Pt/C) catalysts were synthesized by in_situ chemical reduction. They were analyzed using TEM and XRD, then made into electrodes to be part of assemable PEMFC for the performence tests. The resulted show that Pt clusters in both catalysts are of small particle size (about 4nm), and Pt/CNTs exhibits a higher catalytic activity than Pt/C.

Go to article

Preparation And Properties Of The Composite Microporous Pvdf-Hfp/Sio_2 Based Polymer Electrolytes, Bao-Wen Zhang, Lu Qi, Hui Hen, Xiao-Hui Zhu, Li-Yan Liu, Yun-Xiang Ci Nov 2003

Preparation And Properties Of The Composite Microporous Pvdf-Hfp/Sio_2 Based Polymer Electrolytes, Bao-Wen Zhang, Lu Qi, Hui Hen, Xiao-Hui Zhu, Li-Yan Liu, Yun-Xiang Ci

Journal of Electrochemistry

Microporous PVDF_HFP/SiO2 film were prepared using a solvent/nonsolvent method_phase inversion method and the volatile plasticizers DMC, DEC or PC. The conductivity of the films increased pore volume measured by a nonsolvent uptake method. The conductivity of 1.86×10-3 Sm-1 were obtained using the liquid electrolyte LiPF6(1 M) in EC/DMC (1:1).

Go to article

Effect Of Dspp Al_2o_3 On Electrical Properties Of Polymer Electrolyte, Hai-Fen Xie, Xiao-Xiang Sun, Yi-Pin Wang, Guang-Yuan Li Nov 2003

Effect Of Dspp Al_2o_3 On Electrical Properties Of Polymer Electrolyte, Hai-Fen Xie, Xiao-Xiang Sun, Yi-Pin Wang, Guang-Yuan Li

Journal of Electrochemistry

The PEO_NaSCN polymer solid electrolytes by adding dispersed second phase particles (DSPP) of Al2O3 were studied. The characteristics of solid electrolytes and conductivity values are dependent on DSPP Al2O3 sizes and its contents. It was found that when the Al2O3 sizes are less than 1 μm, which is a criticle size, the sample conductivities were larger than those of the pure PEO_NaSCN samples and when the Al2O3 sizes are larger than 1 μm then the sample conductivities are less then those of the pure samples. The maximum conductivity appears when the content of Al2O3 is 25% .Low frequency and high …

Go to article

Study On Degradation Of Phenol By Electrochemical Oxidation, Yueli Liu, Hong-Hua Ge Nov 2003

Study On Degradation Of Phenol By Electrochemical Oxidation, Yueli Liu, Hong-Hua Ge

Journal of Electrochemistry

Electrochemical oxidation of phenol was carried out by the Dimensionally Stable Anodes (DSA) electrode, which has been discarded as waste by alkali chloride factory. The result indicates that a good phenol removal can be obtained under certain phenol concentration by the DSA electrode. The key factor in effecting phenol removal of electrochemical oxidation is applied current density, the following factors are pH, electrolyte concentration and phenol concentration. After experiments, the optimal test conditions are 30 mA/cm2, pH 10, electrolyte concentration 10 mg/L, phenol concentration 10 mg/L.67% CODcr removal and 90% absorbance removal are gained by electrochemical oxidation for 2 hours.

Go to article

The Current Fluctuations Of Carbon Steel In Nano_2-Nacl Solutions, Yu-Ming Tang, Yu Zuo Nov 2003

The Current Fluctuations Of Carbon Steel In Nano_2-Nacl Solutions, Yu-Ming Tang, Yu Zuo

Journal of Electrochemistry

The characteristics of current fluctuations of A3 carbon steel in NaNO2_NaCl solutions were studied with potentiostatic and potentiodynamic polarization methods. The steel remained stable passivation in 0.1 mol/L NaNO2 solution without Cl-. After NaCl was added in to the solution, current fluctuations with a characteristic of quick increase and slow decrease occurred, indicating quick dissolution and slow re_passivation of the metastable pits. The metastable pitting may cause accumulated corrosion damage around certain area and result in observable pits. With the increase of chloride concentration, the occurring potential for metastable pits Em rised, and peak values and frequency of current fluctuations …

Go to article

Adsorption And Oxidation Of Phenol Electrode Processes, Bao-Cheng Wang, Yan-Ping Sun, Jin-Hua Zhu Nov 2003

Adsorption And Oxidation Of Phenol Electrode Processes, Bao-Cheng Wang, Yan-Ping Sun, Jin-Hua Zhu

Journal of Electrochemistry

The electrochemical behaviors of platinum electrode were studied by cyclic voltammetry in 1mol/L sulfuric acid solution and 1mol/L sulfuric acid solution contained phenol. The adsorption characteristics of phenol and the intermediat on electrode surface have been discussed. The reactive reversibility and oxidation mechanism of phenol on electrode process have been investigated.The potential of characteristic adsorption was suggested. The various products woud be formed when the electrode potential was greater than the one of characteristic adsorption.

Go to article

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Quarterly Progress Report (June 1 – August 31, 2003), Ajit K. Roy, Brendan O'Toole Oct 2003

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Quarterly Progress Report (June 1 – August 31, 2003), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

As indicated in the original proposal, the primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate target materials for applications in spallationneutron- target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The materials selected for evaluation and characterization are martensitic stainless steels including Alloy HT-9, Alloy EP 823 and Type 422 stainless steel. The susceptibility to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of these materials are being evaluated in aqueous environments of interest using tensile specimens under constant load and slow-strain-rate (SSR) conditions. …

Go to article

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Quarterly Progress Report (June 01 – Aug 31, 2003), Ajit K. Roy, Brendan O'Toole Oct 2003

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Quarterly Progress Report (June 01 – Aug 31, 2003), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. This Alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. Very little data exist in the open literature on the tensile properties of this Alloy. The test material will be thermally treated prior to the evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface …

Go to article

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (June 01 – August 31, 2003), Ajit K. Roy Oct 2003

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (June 01 – August 31, 2003), Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV), the Idaho State University (ISU), and the Los Alamos National Laboratory (LANL) is to evaluate the feasibility of determining residual stresses in cold-worked, plastically-deformed (bent), and welded materials using a nondestructive method based on positron annihilation spectroscopy (PAS). This technique uses γ-rays from a small MeV electron Linac to generate positrons inside the sample via pair production. This method is known to have capabilities of characterizing defects in thick specimens that could not be accomplished by conventional positron technique or other nondestructive methods. The generated …

Go to article

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Annual Progress Report (September 2002 – August 2003), Ajit K. Roy, Brendan O'Toole Oct 2003

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Annual Progress Report (September 2002 – August 2003), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading structural target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the molten lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. Very little data exist in the open literature on the tensile properties of this martensitic alloy. Three different heats of this material, produced by vacuum induction melting, were thermally treated to produce fully-tempered martensitic microstructure without any retained austenite (Table I). Cylindrical specimens were fabricated from the heat-treated round bars …

Go to article

Corrosion And Mass Transport Processes In Carbon Steel Miniature Waste Packages, James Cizdziel, Kaveh Zarrabi, Susan Lestrange, Amy J. Smiecinski Oct 2003

Corrosion And Mass Transport Processes In Carbon Steel Miniature Waste Packages, James Cizdziel, Kaveh Zarrabi, Susan Lestrange, Amy J. Smiecinski

Publications (YM)

In this study, we have systematically investigated corrosion and mass transport processes in carbon steel miniature waste packages (MWP) in dynamic systems (water in, water out) under varying chemical conditions. The MWP were fabricated to have similar configuration to the DOE Spent Nuclear Fuel (SNF) waste package and that individual components to be in scale with each other compare to the SNF waste package. Two MWP configurations were studied: a "bathtub" model and a "flow-through" model. By slowly dripping 4 different solutions (groundwater obtained from well water J-13 located near Yucca Mountain, and J-13 water adjusted to low-pH, high-salinity, and …

Go to article

Identification Of Dynamic Properties Of Materials For The Nuclear Waste Package, Brendan O'Toole, Mohamed Trabia, Amy J. Smiecinski Oct 2003

Identification Of Dynamic Properties Of Materials For The Nuclear Waste Package, Brendan O'Toole, Mohamed Trabia, Amy J. Smiecinski

Publications (YM)

Stainless steel 316L, titanium alloy grade 7, and alloy C22 are currently under consideration as candidate materials for use in various components associated with the spent nuclear fuel package, which must be designed to withstand structural deformation caused by static, thermal, and handling loads. In addition, it has to maintain its integrity in case of accidents, where it may be subjected to high loads over a very short period of time. Mechanical characteristics of these three materials under dynamic loading are not well documented. This paper describes the procedures and results obtained from experiments performed over a range of slow …

Go to article

Task 32 Delayed Hydride Cracking Of Spent Fuel Cladding Under Repository Conditions, Ajit K. Roy, Anthony Hechanova, Amy J. Smiecinski Sep 2003

Task 32 Delayed Hydride Cracking Of Spent Fuel Cladding Under Repository Conditions, Ajit K. Roy, Anthony Hechanova, Amy J. Smiecinski

Publications (YM)

The objective of this quality-affecting task is to evaluate the susceptibility of spent nuclear fuel cladding materials (zirconium alloys) to stress corrosion cracking (SCC), delayed hydride cracking (DHC) and localized corrosion (pitting/crevice) in simulated repository environments. During the first year of this project, major efforts were focused on developing the infrastructure for performing the desired testing involving two highly corrosion-resistant alloys namely, zircaloy-2 (Zr-2) and zircaloy-4 (Zr-4) in simulated concentrated acidic water (SAW) and modified SAW (SAWM). Modification of the SAW chemistry was done by adding hydrochloric acid (HC1) to achieve lower pH. The construction of the "Materials Performance Laboratory …

Go to article

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 06/01/2003-08/30/2003, Samir Moujaes, Yitung Chen Aug 2003

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 06/01/2003-08/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Go to article

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Annual Report -Phase Ii 09/01/2002-08/30/2003, Samir Moujaes, Yitung Chen Aug 2003

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Annual Report -Phase Ii 09/01/2002-08/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Go to article

Comparison Of Thermal Cyclic Oxidation Of The Pvd Ni-Al And Hvof-Mcraly Coatings, Chang J.T., H. Yeh C., He J.L., Chen K.C. Aug 2003

Comparison Of Thermal Cyclic Oxidation Of The Pvd Ni-Al And Hvof-Mcraly Coatings, Chang J.T., H. Yeh C., He J.L., Chen K.C.

Journal of Electrochemistry

A PVD process_cathodic arc plasma ion plating was used to deposit Ni_Al films on Inconel 600 superalloy. The oxidation behaviors of PVD Ni_Al coating and the thermal sprayed CoCrAlY coatings were revealed and compared by performing cyclic thermal oxidation test at 1 100 ℃ to evaluate its feasibility. Experimental results showed that the films with different compositions of Ni 62 Al 38 , Ni 63 Al 37 and Ni 69 Al 31 could be obtained when using Ni 52 Al 48 , Ni 60 Al 40 and Ni 70 Al 30 as targets, respectively. During the cyclic thermal oxidation test, …

Go to article

Influence Of Marine Organisms Upon Corrosion Of Steel Piling Systems, Jiunn-Shyong Luo, Cliff Cliff, Rau Rau, Kuei-Ching Chen Aug 2003

Influence Of Marine Organisms Upon Corrosion Of Steel Piling Systems, Jiunn-Shyong Luo, Cliff Cliff, Rau Rau, Kuei-Ching Chen

Journal of Electrochemistry

To study the influence of marine organisms upon corrosion of ASTM A36 steel piling sysems,specimens were immersed in both natural and synthetic seawater.Electrochemical techniques such as linear polarization resistance and electrochemical impedance scan(EIS) were applied to evaluate corrosion of the steel.The results indicated that attachment of marine organisms to form fouling layers on the steel surface reduced general corrosion,but localized corrosion occurred underneath marine organisms.An equivalent circuit model was established to simulate attachment of marine organisms upon carbon carbon steel surfaces.

Go to article

The Technique Of Rare-Earth Conversion Coatings On Aluminum Alloy, Jun-Tao Wang, Jian-Hua Wu, Guang-Zhang Chen Aug 2003

The Technique Of Rare-Earth Conversion Coatings On Aluminum Alloy, Jun-Tao Wang, Jian-Hua Wu, Guang-Zhang Chen

Journal of Electrochemistry

The orthogonal design was used to screen the film_forming technique on LY12 aluminum alloy using quadrivalent cerium salt, and the corrosion_resistance performance of the coating was studied. The results revealed that: after LY12 aluminum alloy was treated by cerium salt, its pitting potential shifts to positive direction while the corrosion potential slightly decreases, showing that the alloy becomes less sensitive to pitting corrosion was greatly improved, comparable to that after chromate treatment; in addition, by combining the results of electrochemical measurements with surface analysis, the mechanism of corrosion_resistance on the race_earth conversion coating of the aluminum alloy was also discussed.

Go to article

Synthesis And Electrochemical Properties Of K_2feo_4, Ning Zhou, Shi-Hai Ye, Yong-Long Wang, Xue-Ping Gao, Dong-Feng Lin, Zuo-Xiang Zhou, De-Ying Song Aug 2003

Synthesis And Electrochemical Properties Of K_2feo_4, Ning Zhou, Shi-Hai Ye, Yong-Long Wang, Xue-Ping Gao, Dong-Feng Lin, Zuo-Xiang Zhou, De-Ying Song

Journal of Electrochemistry

The K 2FeO 4 used for new positive electrode materials was prepared. The primary batteries were used in different concentration of electrolyte and different currents. In 9 mol/L KOH , the capacity was the best. The higher the concentration of electrolyte, the lower the electric potential was. When the batteries discharged in 0.4 C , the capacity reached 521.3 mAh/g. By XRD, we gave the reasonable explanations for the discharge products of K 2FeO 4. Possible mechanism of discharge is discussed.

Go to article

Corrosion Fatigue And Dynamic Strain Aging Of Duplex Stainless Steel In Aqueous Solution, Chuan-Ming Tseng, I-Hsuang Lo, Wen-Ta Tsai Aug 2003

Corrosion Fatigue And Dynamic Strain Aging Of Duplex Stainless Steel In Aqueous Solution, Chuan-Ming Tseng, I-Hsuang Lo, Wen-Ta Tsai

Journal of Electrochemistry

The corrosion fatigue and dynamic strain aging behaviors of 22%Cr duplex stainless steel (DSS) in sodium chloride solutions were investigated. Austenitic 316L SS and ferrtic 430 SS were also used in this study for a comparison. The experimental results showed that no stress corrosion cracking (SCC) occurred in all these SSs tested in 3.5wt% NaCl solution at 80 ℃. However, dynamic strain aging (DSA) occurred in 316L austenitic SS and 22%Cr DSS during slow strain rate testing (SSRT) in this solution.The occurrence of DSA was dependent on solution temperature,strain rate and the presence of austenitic phase. The corrosion rate of …

Go to article

An Electrochemical Prediction Method For Caustic Scc Of Fe-Cr-Ni Alloy, Chun-Bo Huang, Zhan-Peng Lv, Wu Yang Aug 2003

An Electrochemical Prediction Method For Caustic Scc Of Fe-Cr-Ni Alloy, Chun-Bo Huang, Zhan-Peng Lv, Wu Yang

Journal of Electrochemistry

Stress corrosion cracking (SCC) of Fe_Cr_Ni alloy (alloy 800 M) in hot concentrated caustic solution was investigated by means of tests of C_rings under controlled potentials. The steady dissolution current densities( i st ) of the plate specimens and C_rings polarized potentiostatically were measured. The simplifed steady potentiostatical curves were drawn on the basis of i st . The ratio R PD measured from i st and steady passive current density i p at low potentials ( R PD = i st / i p ) was designed as a polarization dissolution susceptibility parameter. The parameter R PD values of …

Go to article

Next Last