Physical Sciences and Mathematics Commons^™

Competing Magnetic Phases And Itinerant Magnetic Frustration In Srco2 As2, Bing Li, Benjamin G. Ueland, W. T. Jayasekara, D. L. Abernathy, N. S. Sangeetha, David C. Johnston, Qing-Ping Ding, Yuji Furukawa, Peter P. Orth, Andreas Kreyssig, Alan I. Goldman, Robert J. Mcqueeney

A. I. Goldman

Whereas magnetic frustration is typically associated with local-moment magnets in special geometric arrangements, here we show that SrCo2As2 is a candidate for frustrated itinerant magnetism. Using inelastic neutron scattering (INS), we find that antiferromagnetic (AF) spin fluctuations develop in the square Co layers of SrCo2As2 below T approximate to 100 K centered at the stripe-type AF propagation vector of (1/2, 1/2), and that their development is concomitant with a suppression of the uniform magnetic susceptibility determined via magnetization measurements. We interpret this switch in spectral weight as signaling a temperature-induced crossover from an instability toward ferromagnetism ordering to an instability …

Suppression Of Antiferromagnetic Spin Fluctuations In Superconducting Cr0.8 Ru0.2, M. Ramazanoglu, Benjamin G. Ueland, D. K. Pratt, L. W. Harringer, J. W. Lynn, G. Ehlers, G. E. Granroth, Sergey L. Bud’Ko, Paul C. Canfield, Deborah L. Schlagel, Alan I. Goldman, Thomas A. Lograsso, Robert J. Mcqueeney

A. I. Goldman

Unconventional superconductivity (SC) often develops in magnetic metals on the cusp of static antiferromagnetic (AFM) order where spin fluctuations are strong. This association is so compelling that many SC materials are labeled as unconventional by proximity to an ordered AFM state. The Cr-Ru alloy system possesses such a phase diagram [see Fig. 1(a)]. Here we use inelastic neutron scattering to show that spin fluctuations are present in a SC Cr0.8Ru0.2 alloy (Tc=1.35 K). However, the neutron spin resonance, a possible signature of unconventional SC, is not observed. Instead, data indicate a spin gap of order 2Δ (the superconducting gap) and …

Effects Of Disorder On Thermoelectric Properties Of Semiconducting Polymers, Zlatan Aksamija, Dhandapani Venkataraman, Connor J. Boyle, Meenakshi Upadhyaya

Zlatan Aksamija

Preparation, Modification, Characterization, And Biosensing Application Of Nanoporous Gold Using Electrochemical Techniques, Jay Bhattarai, Dharmendra Neupane, Bishal Nepal, Vasilii Mikhaylov, Alexei Demchenko, Keith Stine

Alexei Demchenko

Behavior Of Na+-Polystyrene Sulfonate At The Interface With Single-Walled Carbon Nanotubes (Swnts) And Its Implication To Swnt Suspension Stability, Tabbetha A. Dobbins, Richard Chevious, Yuri Lvov

Tabbetha A. Dobbins

The assembly of sodium polystyrene sulfonate (Na+-PSS) at the surface of single-walled carbon nanotubes (SWNTs) in pH 3 aqueous solution is described. Rather than forming linear or sheet-like chain morphologies over SWNT surfaces, Na+-PSS adopts a spherically collapsed conformation believed to be the result of cation (either Na+ or H+) condensation onto the ionized polymer chain. It is well reported that cations (and also anions) adsorb preferentially onto single-walled and multi-walled carbon nanotube surfaces leading to an increased ion concentration in the near surface regions relative to the bulk solution. This work provides experimental evidence for preferentially absorbed cation condensation …

Study Of Morphological Changes In Mgh2 Destabilized Libh4 Systems Using Computed X-Ray Microtomography, Tabbetha A. Dobbins, Shathabish Narasegowda, Leslie G. Butler

Tabbetha A. Dobbins

The objective of this study was to apply three-dimensional x-ray microtomographic imaging to understanding morphologies in the diphasic destabilized hydride system: MgH2 and LiBH4. Each of the single phase hydrides as well as two-phase mixtures at LiBH4:MgH2 ratios of 1:3, 1:1, and 2:1 were prepared by high energy ball milling for 5 minutes (with and without 4 mol % TiCl3 catalyst additions). Samples were imaged using computed microtomography in order to (i) establish measurement conditions leading to maximum absorption contrast between the two phases and (ii) determine interfacial volume. The optimal energy for measurement was determined to be 15 keV …

Cobalt-Doped Ceria/Reduced Graphene Oxide Nanocomposite As An Efficient Oxygen Reduction Reaction Catalyst And Supercapacitor Material, Shaikh Parwaiz, Kousik Bhunia, Ashok Kumar Das, Mohammad Mansoob Khan Dr, Debabrata Pradhan

Dr. Mohammad Mansoob Khan

Highly Directional Receiver And Source Antennas Using Photonic Band Gap Crystals, Rana Biswas, Gary L. Tuttle, Ekmel Ozbay, Burak Temelkuran, Mihail Sigalas, Kai-Ming Ho

Gary Tuttle

A directional antenna made with photonic band gap structures has been presented. The directional antenna is formed with two photonic band gap structures oriented back to back and separated from each other by a distance to form a resonant cavity between the photonic band gap structures. An antenna element is placed in the resonant cavity. The resonant frequency of the cavity is tuned by adjusting the distance between the photonic band gap structures. The resonant cavity can be asymmetrical or symmetrical.

Weak Anti-Localization And Quantum Oscillations Of Surface States In Topological Insulator Bi2se2te, Lihong Bao, Liang He, Nicholas R. Meyer, Xufeng Kou, Peng Zhang, Zhi-Gang Chen, Alexei V. Fedorov, Trevor M. Riedemann, Thomas A. Lograsso, Kang L. Wang, Gary Tuttle, Faxian Xiu

Gary Tuttle

Topological insulators, a new quantum state of matter, create exciting opportunities for studying topological quantum physics and for exploring spintronic applications due to their gapless helical metallic surface states. Here, we report the observation of weak anti-localization and quantum oscillations originated from surface states in Bi2Se2Te crystals. Angle-resolved photoemission spectroscopy measurements on cleaved Bi2Se2Te crystals show a well-defined linear dispersion without intersection of the conduction band. The measured weak anti-localization effect agrees well with the Hikami-Larkin-Nagaoka model and the extracted phase coherent length shows a power-law dependence with temperature ( ∼T^−0.44), indicating the presence of the surface states. …

Removal Of Chlorine From Chlorine-Nitrogen Mixture In A Film Of Liquid Water, Sarwan S. Sandhu

Sarwan S. Sandhu

In industry there are many examples of absorption of a gas with or without chemical reaction in the liquid phase. In physical absorption, a particular gaseous component is removed from a gas mixture due to its larger solubility in the liquid phase solvent. The removal of butane and pentane from a refinery gas mixture by a heavy oil in the liquid phase is an example of physical absorption. In absorption with chemical reaction, the gaseous component to be removed transfers across the gas-liquid interface due to a difference in the bulk chemical potentials or concentrations in the two phases. The …

Developing Hyperpolarized Silicon Particles For In Vivo Mri Targeting Of Ovarian Cancer, Nicholas Whiting, Jingzhe Hu, Niki M. Zacharias, Ganesh L. R. Lokesh, David E. Volk, David G. Menter, Rajesha Rupaimoole, Rebecca Previs, Anil K. Sood, Pratip Bhattacharya

Nicholas Whiting

Ferroelectric Polymer Nanopillars Arrays On Flexible Substrates By.Pdf, Shumin Li

Shumin Li

No abstract provided.

Magnetic Transitions In Disordered Gdal2, D. Williams, Paul Shand, Thomas Pekarek, Ralph Skomski, Valeri Petkov, Diandra Leslie-Pelecky

Thomas M. Pekarek

The role of disorder in magnetic ordering transitions is investigated using mechanically milled GdAl2. Crystalline GdAl2 is a ferromagnet while amorphous GdAl2 is a spin glass. Nanostructured GdAl2 shows a paramagnetic-to-ferromagnetic transition and glassy behavior, with the temperature and magnitude of each transition dependent on the degree and type of disorder. Disorder is parametrized by a Gaussian distribution of Curie temperatures TC with mean TC and breadth Δ TC. A nonzero coercivity is observed at temperatures more than 20 K above the highest TC of any known Gd-Al phase; however, the coercivity decreases with decreasing temperature over the same temperature …

Disorder-Induced Depression Of The Curie Temperature In Mechanically Milled Gdal2, Marco Morales Torres, D. Williams, Paul Shand, C. Stark, Thomas Pekarek, L. Yue, Valeri Petkov, Diandra Leslie-Pelecky

Thomas M. Pekarek

The effect of disorder on the ferromagnetic transition is investigated in mechanically milled GdAl2. GdAl2is a ferromagnet when crystalline and a spin glass when amorphous. Mechanical milling progressively disorders the alloy, allowing observation of the change from ferromagnetic to a disordered magnetic state. X-ray diffraction and pair-distribution-function analysis are used to determine the grain size, lattice parameter, and mean-squared atomic displacements. The magnetization as a function of temperature is described by a Gaussian distribution of Curie temperatures. The mean Curie temperature decreases with decreasing lattice parameter, where lattice parameter serves as a measure of defect concentration. Two different rates of …

Improvement Of Mechanical Properties And Water Stability Of Vegetable Protein Based Plastics, Gowrishankar Srinivasan

Gowrishankar Srinivasan

Bio-renewable bio-degradable plastics are a potential solution to the growing problems of pollution caused by petroleum plastics and dependency on foreign nations for petroleum resources. One possible feed stock for these materials are vegetable proteins, especially from soy bean and corn. These proteins have relatively high molecular weights and have the potential of being processed with standard polymer processing technologies. But some issues that need to be addressed are their water instability (soy protein) and inferior mechanical properties as compared to petroleum derived plastics. In this study, soy protein isolates (SPI) and zein protein was processed with various additives and …

Effects Of Cold Work On Near-Surface Conductivity Profiles In Laser Shock Peened And Shot Peened Nickel-Base Superalloy, Tyler J. Lesthaeghe, Brian F. Larson, Ramya Chandrasekar, Anatoli M. Frishman, Chester C.H. Lo, Norio Nakagawa

Tyler J Lesthaeghe

This paper reports on a study of the effects of cold work induced by surface enhancement treatment on conductivity profiles in nickel-base superalloys, as part of the on-going efforts aimed at evaluating the feasibility of characterizing near-surface residual stress profiles in peened engine components using a swept frequency eddy current (SFEC) technique. The approach is based on the empirical piezoresistivity effect that correlates conductivity changes with residual stress, but recent studies have shown that conductivity changes induced by peening processes are also influenced by metallurgical factors such as cold work. In this study, conductivity deviation profiles were obtained by model-based …

Analytical Determination Of Copper Products, Charles Dosh Smith

Charles Kay Smith

"It is a well known fact that the presence of impurities in copper products has been a source of annoyance to the Chemist. The object of this thesis was to make myself familiar with the actions of different impurities in copper products, and the methods for the determination of Arsenic in the same"--page 1.

Obtaining Mixed Ionic/Electronic Conductivity In Perovskite Oxides In A Reducing Environment: A Computational Prediction For Doped Srtio3, S. Suthirakun, Salai Ammal, G. Xiao, Fanglin Chen, Kevin Huang, Hans-Conrad Zur Loye, Andreas Heyden

Salai C. Ammal

No abstract provided.

Density Functional Theory Study On The Electronic Structure Of N- And P-Type Doped Srtio3 At Anodic Solid Oxide Fuel Cell Conditions, S. Suthirakun, Salai Ammal, G. Xiao, Fanglin Chen, Hans-Conrad Zur Loye, Andreas Heyden

Salai C. Ammal

The electronic conductivity and thermodynamic stability of mixed n-type and p-type doped SrTiO3 have been investigated at anodic solid oxide fuel cell (SOFC) conditions using density functional theory (DFT) calculations. In particular, constrained ab initio thermodynamic calculations have been performed to evaluate the phase stability and reducibility of various Nb- and Ga-doped SrTiO3 at synthesized and anodic SOFC conditions. The density of states (DOS) of these materials was analyzed to study the effects of n- and p-doping on the electronic conductivity. In agreement with experimental observations, we find that the transformation from 20% Nb-doped Sr-deficient SrTiO3 to a non-Sr-deficient phase …

Improvement Of Mechanical Properties And Water Stability Of Vegetable Protein Based Plastics, Gowrishankar Srinivasan

Gowrishankar Srinivasan

Bio-renewable bio-degradable plastics are a potential solution to the growing problems of pollution caused by petroleum plastics and dependency on foreign nations for petroleum resources. One possible feed stock for these materials are vegetable proteins, especially from soy bean and corn. These proteins have relatively high molecular weights and have the potential of being processed with standard polymer processing technologies. But some issues that need to be addressed are their water instability (soy protein) and inferior mechanical properties as compared to petroleum derived plastics. In this study, soy protein isolates (SPI) and zein protein was processed with various additives and …

Data Management And Visualization Of X-Ray Diffraction Spectra From Thin Film Ternary Composition Spreads, I. Takeuchi, C. Long, O. Famodu, M. Murakami, Jason Hattrick-Simpers, G. Rubloff, M. Stukowski, K. Rajan

Jason R. Hattrick-Simpers

We discuss techniques for managing and visualizing x-ray diffraction spectrum data for thin film composition spreads which map large fractions of ternary compositional phase diagrams. An in-house x-ray microdiffractometer is used to obtain spectra from over 500 different compositions on an individual spread. The MATLAB software is used to quickly organize the data and create various plots from which one can quickly grasp different information regarding structural and phase changes across the composition spreads. Such exercises are valuable in rapidly assessing the “overall” picture of the structural evolution across phase diagrams before focusing in on specific composition regions for detailed …

Applications Of High Throughput (Combinatorial) Methodologies To Electronic, Magnetic, Optical, And Energy-Related Materials, Martin L. Green, Ichiro Takeuchi, Jason R. Hattrick-Simpers

Jason R. Hattrick-Simpers

High throughput (combinatorial) materials science methodology is a relatively new research paradigm that offers the promise of rapid and efficient materials screening, optimization, and discovery. The paradigm started in the pharmaceutical industry but was rapidly adopted to accelerate materials research in a wide variety of areas. High throughput experiments are characterized by synthesis of a “library” sample that contains the materials variation of interest (typically composition), and rapid and localized measurement schemes that result in massive data sets. Because the data are collected at the same time on the same “library” sample, they can be highly uniform with respect to …

Demonstration Of Magnetoelectric Scanning Probe Microscopy, Jason R. Hattrick-Simpers, Liyang Dai, Manfred Wuttig, Ichiro Takeuchi, Eckhard Quandt

Jason R. Hattrick-Simpers

A near-field room temperature scanning magnetic probe microscope has been developed using a laminated magnetoelectric sensor. The simple trilayer longitudinal-transverse mode sensor, fabricated using Metglas as the magnetostrictive layer and polyvinylidene fluoride as the piezoelectric layer, shows an ac field sensitivity of 467±3μV∕O_e in the measured frequency range of 200Hz–8kHz. The microscope was used to image a 2mm diameter ring carrying an ac current as low as 10⁻⁵A. ac fields as small as 3×10⁻¹⁰T have been detected.

Real-Time Mri-Guided Catheter Tracking Using Hyperpolarized Silicon Particles, Nicholas Whiting, Jingzhe Hu, Jay V. Shah, Maja C. Cassidy, Erik Cressman, Niki Zacharias Millward, David G. Menter, Charles M. Marcus, Pratip K. Bhattacharya

Nicholas Whiting

Colloidal Plasmonic Titanium Nitride Nanoparticles: Properties And Applications, Urcan Guler, Sergey Suslov, Alexander V. Kildishev, Alexandra Boltasseva, Vladimir M. Shalaev

U. Guler

Fabrication Of Ferroelectric Polymer Nanostructures On Flexible Substrates By Soft-Mold Reverse.Pdf, Shumin Li

Shumin Li

No abstract provided.

Magnetic And Transport Properties Of Nimnal Thin Films, Andriy Vovk, Minghui Yu, Leszek Malkinski, Charles O'Connor, Zhenjun Wang, Eden Durant, Jinke Tang, Vladimir Golub

Jinke Tang

The magnetic and transport properties of Ni₂MnAl thin films prepared using pulse laser deposition were investigated. It was shown that the films are granular and multiphase. Contrary to the data reported earlier we observe nonmonotonic temperature dependence of resistance with minimum in the vicinity of 100 K for the films deposited on substrates held at 773 K and negative magnetoresistance (MR) values of about 2.5% at 5 K and 1.6% at RT in magnetic field of 50 kOe. These values of MR are the highest reported up to date for Ni₂MnAl films. Large negative MR in …

Ultrafine Nife2o4 Powder Fabricated From Reverse Microemulsion Process, Jiye Fang, Narayan Shama, Le Duc Tung, Eun Young Shin, Charles J. O'Connor, Kevin L. Stokes, Gabriel Caruntu, John B. Wiley, Leonard Spinu, Jinke Tang

Jinke Tang

NiFe2O4 ultrafine powder with high crystallinity has been prepared through a reverse microemulsion route. The composition in starting solution was optimized, and the resulting NiFe2O4 was formed at temperature of around 550–600 °C, which is much lower than that observed from the solid-state reaction. Magnetic investigation indicates that samples are soft-magnetic materials with low coercivity and with the saturation magnetization close to the bulk value of Ni ferrite.

Electrochemically Active Biofilm Assisted Synthesis Of Ag@Ceo2 Nanocomposites For Antimicrobial Activity, Photocatalysis And Photoelectrodes, Mohammad Mansoob Khan Dr, S. A. Ansari, J. H. Lee, M. O. Ansari, J Lee, M. H. Cho

Dr. Mohammad Mansoob Khan

Ag@CeO2 nanocomposites were synthesized by a biogenic and green approach using electrochemically active biofilms (EABs) as a reducing tool. The as-synthesized Ag@CeO2 nanocomposites were characterized and used in antimicrobial, visible light photocatalytic and photoelectrode studies. The Ag@CeO2 nanocomposites showed effective and efficient bactericidal activities and survival test against Escherichia coli O157:H7, and Pseudomonas aeruginosa. The as-synthesized Ag@CeO2 nanocomposites also exhibited enhanced visible light photocatalytic degradation of 4-nitrophenol and methylene blue than pure CeO2. A photocatalytic investigation showed that the Ag@CeO2 nanocomposites possessed excellent visible light photocatalytic activities compared to pure CeO2. Electrochemical impedance spectroscopy and photocurrent measurements showed that the …

Defect-Induced Band Gap Narrowed Ceo2 Nanostructures For Visible Light Activities, Mohammad Mansoob Khan Dr, S. A. Ansari, D. Pradhan, D. H. Han, J Lee, M. H. Cho

Dr. Mohammad Mansoob Khan

This work reports an electron beam irradiation (30 kGy and 90 kGy) approach to narrow the band gap of the pristine CeO2 nanostructure (p-CeO2) to enhance their visible light activity through defect engineering. This was confirmed by diffuse reflectance spectroscopy, photoluminescence, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller, electrochemical impedance spectroscopy and linear scan voltammetry. XPS revealed changes in the surface states, composition, Ce4+ to Ce3+ ratio and other defects in the modified CeO2 nanostructures (m-CeO2). The m-CeO2 exhibits excellent photocatalytic activities by degrading 4-nitrophenol and methylene blue in the presence of visible light (λ > 400 nm) compared …