Physical Sciences and Mathematics Commons^™

Vr Circuit Simulation With Advanced Visualization For Enhancing Comprehension In Electrical Engineering, Elliott Wolbach

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

As technology advances, the field of electrical and computer engineering continuously demands innovative tools and methodologies to facilitate effective learning and comprehension of fundamental concepts. Through a comprehensive literature review, it was discovered that there was a gap in the current research on using VR technology to effectively visualize and comprehend non-observable electrical characteristics of electronic circuits. This thesis explores the integration of Virtual Reality (VR) technology and real-time electronic circuit simulation with enhanced visualization of non-observable concepts such as voltage distribution and current flow within these circuits. The primary objective is to develop an immersive educational platform that makes …

Next-Generation Crop Monitoring Technologies: Case Studies About Edge Image Processing For Crop Monitoring And Soil Water Property Modeling Via Above-Ground Sensors, Nipuna Chamara

Dissertations and Doctoral Documents from University of Nebraska-Lincoln, 2023–

Artificial Intelligence (AI) has advanced rapidly in the past two decades. Internet of Things (IoT) technology has advanced rapidly during the last decade. Merging these two technologies has immense potential in several industries, including agriculture.

We have identified several research gaps in utilizing IoT technology in agriculture. One problem was the digital divide between rural, unconnected, or limited connected areas and urban areas for utilizing images for decision-making, which has advanced with the growth of AI. Another area for improvement was the farmers' demotivation to use in-situ soil moisture sensors for irrigation decision-making due to inherited installation difficulties. As Nebraska …

The Osteobiography Of Human Remains From The Seaview And Indian Town Trail Archaeological Sites, Annissa Davis

Anthropology Department: Theses

This thesis examines the use of 3D modeling in museum exhibition to create exploratory exhibits that facilitate unique relationships between the visitors and the collection beyond what is provided by the collection’s in person counterparts. Typical use of 3D modeling in museums is currently often representative rather than exploratory. By employing a Digital Humanities lens to approach the development of a digital exhibition utilizing 3D technology and interactive elements created in a video game engine (Unity), this thesis project evaluates these potential new relationships. Using the Eloise Kruger Collection of Miniatures as a case study, the following text details the …

Enhanced Privacy-Enabled Face Recognition Using Κ-Identity Optimization, Ryan Karl

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Facial recognition is becoming more and more prevalent in the daily lives of the common person. Law enforcement utilizes facial recognition to find and track suspects. The newest smartphones have the ability to unlock using the user's face. Some door locks utilize facial recognition to allow correct users to enter restricted spaces. The list of applications that use facial recognition will only increase as hardware becomes more cost-effective and more computationally powerful. As this technology becomes more prevalent in our lives, it is important to understand and protect the data provided to these companies. Any data transmitted should be encrypted …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Analysis Of Students’ Multi-Representation Ability In Augmented Reality-Assisted Learning, Sri Jumini, Edy Cahyono, Muhamad Miftakhul Falah

Library Philosophy and Practice (e-journal)

Not all learning sources can directly and cheaply be presented, so augmented reality media is needed to be applied to students with various talents and intelligence. This study aims to analyze students’ multi-representation ability through the use of augmented reality media. The research method was carried out through pre-experiment with one group posttest only design. Test question items were given to see the students’ multi-representation ability. Data analysis was carried out through the percentage of the number of students achieving test scores of more than or equal to 80 on a scale of 100. The results showed that 88% (28 …

Svat4: A Computer Program For Visualization And Analysis Of Crystal Structures, Xingzhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

SVAT4 is a computer program for interactive visualization of three-dimensional crystal structures, including chemical bonds and magnetic moments. A wide range of functions, e.g. revealing atomic layers and polyhedral clusters, are available for further structural analysis. Atomic sizes, colors, appearance, view directions and view modes (orthographic or perspective views) are adjustable. Customized work for the visualization and analysis can be saved and then reloaded. SVAT4 provides a template to simplify the process of preparation of a new data file. SVAT4 can generate high-quality images for publication and animations for presentations. The usability of SVAT4 is broadened by a software suite …

Image Classification Using Fuzzy Fca, Niruktha Roy Gotoor

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Formal concept analysis (FCA) is a mathematical theory based on lattice and order theory used for data analysis and knowledge representation. It has been used in various domains such as data mining, machine learning, semantic web, Sciences, for the purpose of data analysis and Ontology over the last few decades. Various extensions of FCA are being researched to expand it's scope over more departments. In this thesis,we review the theory of Formal Concept Analysis (FCA) and its extension Fuzzy FCA. Many studies to use FCA in data mining and text learning have been pursued. We extend these studies to include …

Digital Addiction: A Conceptual Overview, Amarjit Kumar Singh, Pawan Kumar Singh

Library Philosophy and Practice (e-journal)

Abstract

Digital addiction referred to an impulse control disorder that involves the obsessive use of digital devices, digital technologies, and digital platforms, i.e. internet, video game, online platforms, mobile devices, digital gadgets, and social network platform. It is an emerging domain of Cyberpsychology (Singh, Amarjit Kumar and Pawan Kumar Singh; 2019), which explore a problematic usage of digital media, device, and platforms by being obsessive and excessive. This article analyses, reviewed the current research, and established a conceptual overview on the digital addiction. The research literature on digital addiction has proliferated. However, we tried to categories the digital addiction, according …

"Flagella Base Model" And "Flagellin Monomer", Brandon Lasalle, Rebecca Roston

3-D Printed Model Structural Files

"Flagella Base Model" and "Flagellin monomer"

Description: This is a teaching model of the proteins that make a bacterial flagella. All models are depicted in space-fill. The Flagellin monomer and the Flagella base can slot together to show protein quaternary structure and filamentous protein assembly.

Printable models are already uploaded to Shapeways.com in the MacroMolecules shop under the names "Flagella Base Model" and "Flagellin monomer".

This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following material: Processed Versatile Plastic (Strong & Flexible Plastic).

Model designer: Brandon Lasalle Authors: Brandon Lasalle and Rebecca Roston …

Amino Acid Pop-Set: Model File Name: Amino-Acid-Wgrp-Pop_Sc3.Stl, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

This is a teaching model for protein primary structure. It consists of four amino acids (tryptophan, proline, arginine, and glycine) depicted in stick and space-fill representations, five peptide bonds depicted in space-fill, and an N-terminus and a C-terminus depicted in space-fill. It is designed so that students can make various peptides to explore the amount of space of the electron clouds of the amino acids and bonds, and explore the psi and phi angles for the peptides. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Amino acid pop-set”. This model has …

Lipoprotein Signal Peptidase Ii: Model File Name: 5dir-Lipoii-Reps_Sc1-5.Stl, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

This is a teaching model of lipoprotein signal peptidase II (PDB: 5DIR). It is designed with different regions of the protein depicted in space-filling, ribbon, stick, and backbone-only representations to explore protein secondary structure and illustrate how much space the protein takes up. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lipoprotein signal peptidase II” and is intended to accompany the “Crambin”, “Cytochrome c” and “3 water molecules” models. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in …

3 Water Molecules: Model File Name: 3hoh-Final.Stl, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

This is a teaching model of 3 water molecules depicted in space-fill. It is designed to the same scale as the “Lipoprotein signal peptidase II”, “Crambin”, and “Cytochrome c” models to illustrate the amount of space taken up by proteins. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “3 water molecules” and is intended to accompany the “Lipoprotein signal peptidase II”, “Crambin”, and “Cytochrome c” models. This model has been printed successfully using these parameters on Shapeways’ laser sintering …

Crambin: Model File Name: 2fd7-Crambin-Stick_Sc1-5.Stl, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

This is a teaching model of cytochrome c (PDB: 2FD7). It is designed in a stick representation to explore protein secondary structure and how much space the protein takes up. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Crambin” and is intended to accompany the “Lipoprotein signal peptidase II”, “Cytochrome c”, and “3 water molecules” models. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following material: Processed Versatile Plastic (Strong & Flexible Plastic).

Cytochrome C: Model File Name: 1b7v-Cytc-Stick_Sc1-5.Stl, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

This is a teaching model of cytochrome c (PDB: 1B7V). It is designed in a stick representation to explore protein secondary structure and how much space the protein takes up. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Cytochrome c” and is intended to accompany the “Lipoprotein signal peptidase II”, “Crambin”, and “3 water molecules” models. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following material: Processed Versatile Plastic (Strong & Flexible Plastic).

Human Hexokinase I - Allosteric Regulation: Model File Name: 1dgk-Editb22-Allostery_Sc06.Stl, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

This is a teaching model of human Hexokinase I in a surface representation with small molecules ADP and G6P included (PDB: 1DGK). It is designed to be hollow with a lever to mimic allosteric regulation. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Human Hexokinase I - Allosteric regulation model”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following material: Processed Versatile Plastic (Strong & Flexible Plastic).

Speech Emotion Recognition Using Convolutional Neural Networks, Somayeh Shahsavarani

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Automatic speech recognition is an active field of study in artificial intelligence and machine learning whose aim is to generate machines that communicate with people via speech. Speech is an information-rich signal that contains paralinguistic information as well as linguistic information. Emotion is one key instance of paralinguistic information that is, in part, conveyed by speech. Developing machines that understand paralinguistic information, such as emotion, facilitates the human-machine communication as it makes the communication more clear and natural. In the current study, the efficacy of convolutional neural networks in recognition of speech emotions has been investigated. Wide-band spectrograms of the …

Model File Name: 1ehz-Trna(Thick).Stl, Michelle Howell, Karin Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1ehz-tRNA(thick).stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of Phe-tRNA in a thick stick-representation (PDB: 1ehz), designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com under the name “tRNA-Phe small”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following materials: Strong & Flexible Plastic and Elasto Plastic.

Model File Name: 1lmb-Dbd-Tfmono.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-DBD-TFmono.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of the DNA binding domain of a Lambda repressor transcription factor monomer that accompanies the full color DNA helix (PDB: 1lmb). It is in a cartoon ribbon representation with key amino acid residues in stick representation to highlight interactions with the DNA. This model is designed to accompany a teaching module illustrating transcription factor-DNA binding. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lambda TF DBD”. This model has been printed …

Model File Name: 1ehz-Trna(Thin-Big).X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1ehz-tRNA(thin-big).x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of Phe-tRNA in a large, but thin stick-representation (PDB: 1ehz), designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Full color Phe-tRNA (1ehz)”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following material: Strong & Flexible Plastic.

Model File Name: 1lmb-Dnalong_Fordimer-Test6b.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-DNAlong_fordimer-test6b.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of the 19-bp segment of DNA to which Lambda repressor transcription factor interacts (PDB: 1lmb). It is in a stick representation and has been designed with sites to add magnets to illustrate binding interactions with the transcription factor. Sphere magnets with a 1/8” diameter can be purchased separately from K&J Magnets. The model can interact with the dimer form of the transcription factor. This model is designed to accompany a teaching module illustrating transcription factor-DNA binding. The printable model …

Model File Name: 1lmb-Tfdimer-Mags-Joints-Jnd-Sc1-8-Parts-V4b.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-TFdimer-mags-joints-jnd-sc1-8-parts-v4b.stl

Additional files: 1lmb-Lys-Ser-extras-v4b.stl and 1lmb-TFdimer-Leu-v4b.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a ribbon and stick representation of the transcription factor lambda repressor (PDB: 1lmb). Key amino acid residues are in stick representation to illustrate the interactions between the repressor and the DNA to which it binds. Some of these residues have been designed with sites to add magnets to illustrate these interactions. Sphere magnets with a 1/8” diameter can be purchased separately from K&J Magnets. Some of the residues can be interchanged with other …

Model File Name: Dna-294bp-Magnet-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-294bp-magnet-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (294 bp). The DNA model has small sites on the ends where the user can glue magnets to mimic circular DNA, and to aid in manipulating the model. Disc magnets with a diameter of 1/8” or 1/10” and thickness of 1/16” can be purchased online from K&J Magnetics and glued into the magnet sites. The model is designed to go with a teaching module on DNA supercoiling. The model can …

Model File Name: Dna-294bp-Handle-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-294bp-handle-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (294 bp). The DNA model has small handles on the ends to aid in holding and manipulating the model. The model is designed to go with a teaching module on DNA supercoiling. The model can be accompanied by Nucleosome and H1 histone models to demonstrate DNA packaging in the cell. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “294bp DNA (handles)”. …

Model File Name: Dna-420bp-Handle-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-420bp-handle-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (420 bp). The DNA model has small handles on the ends to aid in holding and manipulating the model. The model is designed to go with a teaching module on DNA supercoiling. The model can be accompanied by Nucleosome and H1 histone models to demonstrate DNA packaging in the cell. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “420bp DNA (handles)”. …

Model File Name: Dnalong-3pc-Lego.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNAlong-3pc-Lego.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a stick representation of the DNA to which the transcription factor lambda repressor binds (PDB: 1lmb). This model can be adapted to accompany a teaching module illustrating transcription factor-DNA binding. The model has been designed in 3 parts that can be joined together by Lego®-style junctions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lego DNA with GCbp”. This model has been printed successfully using these parameters on Shapeways’ laser …

Model File Name: Dna-420bp-Magnet-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-420bp-magnet-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (420 bp). The DNA model has small sites on the ends where the user can glue magnets to mimic circular DNA, and to aid in manipulating the model. Disc magnets with a diameter of 1/8” or 1/10” and thickness of 1/16” can be purchased online from K&J Magnetics and glued into the magnet sites. The model is designed to go with a teaching module on DNA supercoiling. The model can …

Model File Name: H1-Protein.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: H1-protein.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a crude representation of an H1-protein intended to accompany the nucleosome and a long, thin double stranded DNA helix model in order to illustrate DNA packaging and supercoiling. This model is designed to go with a teaching module on DNA supercoiling. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Histone H1 protein”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following materials: Strong …

Model File Name: Dna-Short-Helix.X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-short-helix.x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a DNA helix in which the atoms are colored by heteroatom (PDB: 1lmb). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions, and with one that studies transcription factor-DNA binding. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “DNA helix - polynucleotide molecule”. This model has been printed successfully using these parameters on Shapeways’ binder jetting printer in the Coated Full …

Model File Name: Ssdna.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: ssDNA.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a single stranded piece of DNA in stick representation (PDB: 1ehz). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “ssDNA”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Elasto Plastic material.