Physical Sciences and Mathematics Commons^™

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design: Quarterly Report October 1-December 31, 2004, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The Advanced Fuel Cycle Initiative (AFCI) and Transmutation Research Program- University Participation Program (TRP-UPP) supported by Department of Energy of the United States have been developing many important technologies for the transmutation of nuclear waste to address long-term disposal issues. While successfully embedding AMUSE module into a dedicated System Engineering Model (TRPSEMPro), developed by the Nevada Center for Advanced Computational Methods (NCACM) at the University of Nevada, Las Vegas collaborating with Argonne National Laboratory (ANL), ANL is interested in further simulating the Light Water Reactor (LWR) Spent Fuel Treatment Facility (SFTF) combining commercial process simulation and analysis packages and core …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead-Alloys Coolant Systems, Yitung Chen

Transmutation Sciences Materials (TRP)

The goal of the proposed research project is to provide basic understanding of the protective oxide layer behaviors and to develop oxide layer growth models of steels in non-isothermal lead-alloys (lead or lead-bismuth eutectic) coolant systems. It is widely recognized that the corrosiveness of the lead-alloys is a critical obstacle and challenge for which it can be safely used or applied in the nuclear coolant systems. Active oxygen control technique can promote the formation of the “self-healing” oxide films on the structural material surface, drastically reducing steel corrosion and coolant contamination. Many experiments of steels exposed to flowing lead-alloys have …

Minimum Power Configuration In Wireless Sensor Networks, Guoliang Xing, Chenyang Lu, Ying Zhang, Qingfeng Huang, Robert Pless

All Computer Science and Engineering Research

This paper proposes the minimum power configuration (MPC) approach to energy conservation in wireless sensor networks. In sharp contrast to earlier research that treats topology control, power-aware routing, and sleep management in isolation, MPC integrates them as a joint optimization prob-lem in which the power configurationof a network consists of a set of active nodes and the transmission powers of the nodes. We show through analysis that the minimum power configu-ration of a network is inherently dependent on the data rates of sources. We propose several approximation algorithms with provable performance bounds compared to the optimal solu-tion, and a practical …

My Life With Polymer Science: Scientific And Personal Memoirs, Otto Vogl

Emeritus Faculty Author Gallery

My "life story" will begin with my formative years, my childhood and student days at the University of Vienna, including my dissertation. It will be followed by my teaching appointment as an Instructor at the II. Chemical Institute of the University of Vienna. The urge to see other lands, learn other languages and scientific methods led to the Wandering Years that brought me to the United States. After three years spent as a Research Associate at the University of Michigan and at Princeton University I spent more than 13 years in an industrial career at the Du Pont Company in …

Neutron Multiplicity Measurements For The Afci Program Quarterly Progress Report September-December 2004, Denis Beller

Transmutation Sciences Physics (TRP)

The U.S. Advanced Fuel Cycle Initiative (AFCI) is a program to develop economic and environmental methods to reduce the impact of waste from commercial nuclear fuel cycles. One concept for near-complete destruction of waste isotopes from used nuclear fuel is accelerator driven transmutation. High-power accelerators would be used to produce high-energy charged particles, which then collide with heavy metal targets to create a cascade of neutrons. These neutrons then cause a nuclear chain reaction in subcritical systems. Fission neutrons then transmute fissile waste isotopes as well as other problematic isotopes such as technetium-99 and iodine-129. To design these systems, complex …

Reactor Physics Studies For The Afci Race Project: Reactor-Accelerator Coupling Experiments Project: Quarterly Progress Report September-December 2004, Denis Beller

Transmutation Sciences Physics (TRP)

In the RACE Project of the U.S. Advanced Fuel Cycle Initiative (AFCI), a series of accelerator driven subcritical systems (ADSS) experiments will be conducted at the Idaho State University’s Idaho Accelerator Center (ISU-IAC), at the University of Texas (UT) at Austin, and at the Texas A&M University. In these experiments we will use electron accelerators to induce bremsstrahlung photon-neutron reactions in heavy-metal targets; this source of about 10¹² to 10¹³ n/s will then initiate fission reactions in the subcritical systems. These systems will include a compact, transportable assembly at ISU and TRIGA reactors at UT-Austin and Texas A&M. …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry, Morphology, And Surface Preparation: Quarterly Report (October-December 2004), Allen L. Johnson, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

This project has four components:

(1) the fabrication of a materials test apparatus with unique capabilities,

(2) comparative studies of steel corrosion under gas phase conditions comparable to the Lead Bismuth Eutectic (LBE) oxygen control conditions,

(3) isotope labeling studies, and

(4) collaborative efforts with other workers in the field.

Afci Quarterly Input – Unlv October Through December, 2004, Harry Reid Center For Environmental Studies. Nuclear Science And Technology Division

Transmutation Research Program Reports (TRP)

Quarterly report highlighting research projects, activities and objectives of the Transmutation Research Program at the Nuclear Science & Technology Division, Harry Reid Research Center.

The University of Nevada, Las Vegas supports the AFCI through research and development of technologies for economic and environmentally sound refinement of spent nuclear fuel. The UNLV program has four components: infrastructure, international collaboration, student-based research, and management and program support. Management and program support highlights are the following: the UNLV TRP hosted the Eighth Annual IAEA Actinide and Fission Product Partitioning & Transmutation Information Exchange Meeting (Nov. 9 – 11). 120 people from 22 countries …

Nichtmonotone, Neuro-Symbolische Und Begriffliche Wissensverarbeitung, Pascal Hitzler

Computer Science and Engineering Faculty Publications

Diese Schrift dient dem Bericht uber die Hauptaspekte meiner Forschertatigkeit an der TU Dresden seit der Promotion. In diesen dreieinhalb Jahren war es mein Bestreben, selbststandig aktuelle, theoretisch fundierte und anwendungsbezogene Fragestellungen zu entwickeln und zu verfolgen.

Naturgemaß war meine Forschung in dieser Zeit vor allem zu Anfang sehr explorativ. Meine Suche konzentrierte sich dabei auf das Herausarbeiten theoretischer Zusammenhange. Ob ich einen Ansatz dann weiterverfolgte entschied sich anschließend aufgrund einer Evaluation aus angewandter Sicht.

Die in dieser Schrift dargestellten Forschungsansatze gedenke ich in Zukunft fortzufuhren. Sie bilden die Keimzellen fur langfristig angelegte angewandte und theoretische Untersuchungen. Ich werde in …

Using Fine-Grained Cycle Stealing To Improve Throughput, Efficiency And Response Time On A Dedicated Cluster While Maintaining Quality Of Service, Gary Stiehr

All Computer Science and Engineering Research

For various reasons, a dedicated cluster is not always fully utilized even when all of its processors are allocated to jobs. This occurs any time that a running job does not use 100% of each of the processors allocated to it. Keeping in mind the needs of both the cluster’s system administrators and its users, we would like to increase the throughput and efficiency of the cluster while maintaining or improving the average turnaround time of the jobs and the quality of service of the “primary” jobs originally scheduled on the cluster. To increase the throughput and efficiency of the …

Niel Calculations For High-Energy Heavy Ions, John W. Wilson, I. Jun, M. A. Xapsos, E. A. Burke, F. F. Badavi, L. W. Townsend

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Calculations of NIEL are reported for heavy ions prominent in the space environment for energies ranging from 200 MeV per nucleon to 2 GeV per nucleon.

Bicistronic And Fused Monocistronic Transcripts Are Derived From Adjacent Loci In The Arabidopsis Genome, Jyothi Thimmapuram, Hui Duan, Lei Liu, Mary A. Schuler

Cyber Center Publications

Comparisons of full-length cDNAs and genomic DNAs available for Arabidopsis thaliana described here indicate that some adjacent loci are transcribed into extremely long RNAs spanning two annotated genes. Once expressed, some of these transcripts are post-transcriptionally spliced within their coding and intergenic sequences to generate bicistronic transcripts containing two complete open reading frames. Others are spliced to generate monocistronic transcripts coding for fusion proteins with sequences derived from both loci. RT-PCR of several P450 transcripts in this collection indicates that these extended transcripts exist side by side with shorter monocistronic transcripts derived from the individual loci in each pair. The …

Additive-Assisted Cerium-Based Electrolytic Coating Process For Corrosion Protection Of Aluminum Alloys, James O. Stoffer, Thomas J. O'Keefe, Eric L. Morris, Scott Hayes, Paul Yu, Alex Williams, Xuan Lin

Chemistry Faculty Research & Creative Works

The corrosion resistance of an aluminum or aluminum alloy component is enhanced by immersing an aluminum alloy to act as a cathode and an oxygen-evolving anode in an electrolyte comprising water, cerium ions, and an additive selected from among animal gelatin, derivatives of animal gelatin, and amino acids, then passing an electrical current through the electrolyte to deposit a cerium-based coating onto the aluminum-based component.

Pictures From My Life With Polymer Science: Album 1, Otto Vogl

Emeritus Faculty Author Gallery

No abstract provided.

Corrective Maintenance Optimization In An Air Force, Hoong Chuin Lau, K. Y. Neo, W. C. Wan

Research Collection School Of Computing and Information Systems

Successful military mission planning and execution depend critically on equipment serviceability and resupply. Due to the stochastic nature of demands, the forecast of optimal spares and resources needed to guarantee the level of serviceability is a complex problem, especially in a multi-echelon setting. In this paper, we propose a decision-support concept and software tool known as Corrective Maintenance Optimizer (CMO) that helps to optimize system availability, through proper allocation of spare parts, both strategically and operationally.

Two-Echelon Repairable Item Inventory System With Limited Repair Capacity Under Nonstationary Demands, Hoong Chuin Lau, Huawei Song

Research Collection School Of Computing and Information Systems

We study a repairable item inventory system under limited repair capacity and nonstationary Poisson demands, motivated by corrective maintenance of military equipment. Our goal is to minimize the cost of both spare and repair resource allocation. We propose an efficient analytical model that combines optimization modeling and queuing theory.

Job Scheduling With Unfixed Availability Constraints, Hoong Chuin Lau, C. Zhang

Research Collection School Of Computing and Information Systems

Standard scheduling theory assumes that all machines are continuously available throughout the planning horizon. In many manufacturing and service management situations however, machines need to be maintained periodically to prevent malfunctions. During the maintenance period, a machine is not available for processing jobs. Hence, a more realistic scheduling model should take into account machine maintenance activities. In this paper, we study the problem of job scheduling with unfixed availability constraints on a single machine. We first propose a preliminary classification for the scheduling problem with unfixed availability constraints based on maintenance constraints, job characteristics and objective function. We divide our …

Logistics Network Design With Differentiated Delivery Lead Time: A Chemical Industry Case Study, Michelle Lee Fong Cheong, Rohit Bhatnagar, Stephen C. Graves

Research Collection School Of Computing and Information Systems

Most logistics network design models assume exogenous customer demand that is independent of the service time or level. This paper examines the benefits of segmenting demand according to lead-time sensitivity of customers. To capture lead-time sensitivity in the network design model, we use a facility grouping method to ensure that the different demand classes are satisfied on time. In addition, we perform a series of computational experiments to develop a set of managerial insights for the network design decision making process.

Integrated Coverage And Connectivity Configuration For Energy Conservation In Sensor Networks, Guoliang Xing, Xiaorui Wang, Yuanfang Zhang, Chenyang Lu, Robert Pless, Christopher Gill

All Computer Science and Engineering Research

An effective approach for energy conservation in wireless sensor networks is scheduling sleep intervals for extraneous nodes, while the remaining nodes stay active to provide continuous service. For the sensor network to operate successfully, the active nodes must maintain both sensing coverage and network connectivity. Fur-thermore, the network must be able to configure itself to any feasible degrees of coverage and connectivity in order to support different applications and environments with diverse requirements. This paper presents the design and analysis of novel protocols that can dynamically configure a network to achieve guaranteed degrees of coverage and connectivity. This work differs …

A Periodic-Review Inventory Model With Application To The Continuous-Review Obsolescence Problem, Yuyue Song, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

In this paper we consider a stochastic-demand periodic-review inventory model with sudden obsolescence. We characterize the structure of the optimal policy and propose a dynamic programming algorithm for computing its parameters. We then utilize this algorithm to approximate the solution to the continuous-review sudden obsolescence problem with general obsolescence distribution. We prove convergence of our approximation scheme, and demonstrate it numerically against known closed-form solutions of special cases.

2004 Scholars And Artists Bibliography, Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti

Assessment Of Engineering Mechanics Instructional Multimedia In A Variety Of Instructional Settings, Richard H. Hall, Nancy Hubing, Timothy A. Philpot, Ralph E. Flori, Vikas Yellamraju

Business and Information Technology Faculty Research & Creative Works

Students from Ten Schools, Representing Seven Countries, Used Interactive Multimedia as a Part of their Engineering Statics Classes. the Software Consisted of Four Modules, Which Focused On: Mohr's Circle; Centroid and Moment of Inertia; Stress Transformation; and Structural Analysis. the Students Completed On-Line Surveys About their Experience with the Software. Analysis of the Results Indicated that Students Rated their Knowledge of the Subject Matter Covered in the Software as Increasing Significantly as a Consequence of using the Software. However, This Increase Was Substantially More Pronounced for Students in U.S. Schools. Students Rated the Software as Significantly More Effective Than their …

Long-Term Mechanical Behavior Of Yucca Mountain Tuffs, And Its Variability, Jaak J.K. Daemen, George Danko, Jaime Gonzalez, Amy J. Smiecinski, Raymond E. Keeler

Publications (YM)

We propose to continue the investigation of the long term strength of Yucca Mountain tuffs, with particular emphasis on tuffs from and near the emplacement horizon. We propose to also continue and expand the investigation of the spatial variability of rock strength and stiffness. An intrinsic component of this planned rock testing is the testing of rock joints. Although the emphasis is on tests aimed at determining long term strength, as part of the testing measurements of stiffness also are collected, and will be collected, reported, and analyzed.

Automated Motion Synthesis For Virtual Choreography, Gazihan Alankus, A. Alphan Bayazit, O. Burchan Bayazit

All Computer Science and Engineering Research

In this paper, we present a technique to automati-cally synthesize dancing moves for arbitrary songs. Our current implementation is for virtual characters, but it is easy to use the same algorithms for entertainer robots, such as robotic dancers, which fits very well to this year’s conference theme. Our technique is based on analyzing a musical tune (can be a song or melody) and synthesizing a motion for the virtual character where the character’s movement synchronizes to the musical beats. In order to analyze beats of the tune, we developed a fast and novel algorithm. Our motion synthesis algorithm analyze library …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Final Progress Report (September 2003 – August 2004), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this task is to evaluate the tensile properties of three martensitic alloys namely, Alloys EP-823, HT-9 and 422 at temperatures relevant to the transmutation processes. Testing has been performed to evaluate the tensile properties of all three alloys at temperatures ranging from ambient to 600^°C. The test materials were thermally-treated (quenched and tempered) prior to the evaluation of their tensile properties. The deformation characteristics of these tensile specimens, upon completion of testing, were evaluated by scanning electron microscopy (SEM). Efforts were also made to identify and characterize defects such as dislocations using transmission electron microscopy …

Surface Temperature And Spectral Measurements At Santiaguito Lava Dome, Guatemala, Steve T. M. Sahetapy-Engel, Luke P. Flynn, Andrew J. L. Harris, Gregg J. Bluth, William I. Rose, Otoniel Matias

Department of Geological and Mining Engineering and Sciences Publications

An infrared thermometer, spectroradiometer and digital video camera were used to observe and document short-term evolution of surface brightness temperature and morphology at Santiaguito lava dome, Guatemala. The thermometer dataset shows 40–70 minute-long cooling cycles, each defined by a cooling curve that is both initiated and terminated by rapid increases in temperature due to regular ash venting. The average cooling rate calculated for each cycle range from 0.9 to 1.6°C/min. We applied a two-component thermal mixture model to the spectroradiometer (0.4–2.5 μm) dataset. The results suggest that the observed surface morphology changed from a cool (120–250°C) crust-dominated surface with high …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (June 01 – August 31, 2004), Ajit K. Roy

Transmutation Sciences Materials (TRP)

Highlights of Test Results:

• Residual stress measurements by the RC method on cold-worked specimens showed tensile residual stresses in austenitic stainless steel. However, compressive residual stresses were observed in martensitic stainless steel. This difference may be attributed to the difference in metallurgical phases and microstructures resulting from different thermal treatments imparted to them.

• Residual stress measurements by both ND and RC techniques on welded specimens showed similar patterns. Welded specimens consisting of similar material showed tensile residual stresses in the vicinity of the fusion line (FL). However, welded specimens consisting of dissimilar materials (austenitic and martensitic stainless steel …

Solvent And Method For Extraction Of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-Souk Nam, V. J. Flanigan

Chemistry Faculty Research & Creative Works

The present invention relates to a solvent for use in extracting oil from an oil bearing material, such as soybeans, with the solvent resulting in the selective extraction of a triglyceride rich oil, which contains 95% or greater triglycerides and non-polar constituents, with the solvent comprised of a hydrocarbon, preferably hexane, and a fluorocarbon, so that the solvent has a viscosity less than 2.6 centipoise and a polarity of less than 0.1. The present invention also relates to a method of using the solvent to extract the triglyceride rich oil, with the method including preferably extracting the oil at a …

Pictures From My Life With Polymer Science: Album 2, Otto Vogl

Emeritus Faculty Author Gallery

No abstract provided.

Ceg 760: Advanced Software Computer Engineering, Thomas C. Hartrum

Computer Science & Engineering Syllabi

This course covers advanced topics in software engineering. Aspects of problem specification, design, verification, and evaluation are discussed. We will focus on design methods, including software patterns and software architecture, plus some advanced topics involving formal methods of software specification or evaluation using software metrics. Students will participate in team projects to apply the methods discussed.