Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication
Articles 1 - 16 of 16
Full-Text Articles in Physical Sciences and Mathematics
High Performance Pure Sulfur Honeycomb-Like Architectures Synthesized By A Cooperative Self-Assembly Strategy For Lithium Sulfur Batteries, Xin Liang, Mohammad Kaiser, Konstantin Konstantinov, Richard Tandiono, Zhaoxiang Prof Zhaoxiang Wang, Hua-Kun Liu, S X. Dou, Jiazhao Wang
High Performance Pure Sulfur Honeycomb-Like Architectures Synthesized By A Cooperative Self-Assembly Strategy For Lithium Sulfur Batteries, Xin Liang, Mohammad Kaiser, Konstantin Konstantinov, Richard Tandiono, Zhaoxiang Prof Zhaoxiang Wang, Hua-Kun Liu, S X. Dou, Jiazhao Wang
Shi Xue Dou
Honeycomb-like pure sulfur architectures were synthesized by a cooperative self-assembly strategy, in which a soft template is used to form the porous structure. Their electrochemical performance is significantly improved comparing with the commercial sulfur powder and the as-prepared sulfur without honeycomb morphology. There has been no report on using a soft template to prepare honeycomb-like sulfur particles.
High-Performance Sodium-Ion Batteries And Sodium-Ion Pseudocapacitors Based On Mos2/Graphene Composites, Yunxiao Wang, Shulei Chou, David Wexler, Hua-Kun Liu, S X. Dou
High-Performance Sodium-Ion Batteries And Sodium-Ion Pseudocapacitors Based On Mos2/Graphene Composites, Yunxiao Wang, Shulei Chou, David Wexler, Hua-Kun Liu, S X. Dou
Shi Xue Dou
Sodium-ion energy storage, including sodium-ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium-ion energy storage. It is an intriguing prospect, especially for large-scale applications, owing to its low cost and abundance. MoS2 sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS2/G) were constructed. The enlarged d-spacing, a contribution of the graphene matrix, and the …
Ultra-High Performance, High-Temperature Superconducting Wires Via Cost-Effective, Scalable, Co-Evaporation Process, Ho-Sup Kim, Sang-Soo Oh, Hong-Soo Ha, Dojun Youm, Seung-Hyun Moon, Jung Ho Kim, S X. Dou, Yoon-Uk Heo, Sung-Hun Wee, Amit Goyal
Ultra-High Performance, High-Temperature Superconducting Wires Via Cost-Effective, Scalable, Co-Evaporation Process, Ho-Sup Kim, Sang-Soo Oh, Hong-Soo Ha, Dojun Youm, Seung-Hyun Moon, Jung Ho Kim, S X. Dou, Yoon-Uk Heo, Sung-Hun Wee, Amit Goyal
Shi Xue Dou
Long-length, high-temperature superconducting (HTS) wires capable of carrying high critical current, Ic, are required for a wide range of applications. Here, we report extremely high performance HTS wires based on 5 μm thick SmBa2Cu3O7 − δ (SmBCO) single layer films on textured metallic templates. SmBCO layer wires over 20 meters long were deposited by a cost-effective, scalable co-evaporation process using a batch-type drum in a dual chamber. All deposition parameters influencing the composition, phase, and texture of the films were optimized via a unique combinatorial method that is broadly applicable for co-evaporation of other promising complex materials containing several cations. …
Tensile Testing Of Individual Glassy, Rubbery And Hydrogel Electrospun Polymer Nanofibres To High Strain Using The Atomic Force Microscope, Adrian Gestos, Philip G. Whitten, Geoffrey M. Spinks, Gordon G. Wallace
Tensile Testing Of Individual Glassy, Rubbery And Hydrogel Electrospun Polymer Nanofibres To High Strain Using The Atomic Force Microscope, Adrian Gestos, Philip G. Whitten, Geoffrey M. Spinks, Gordon G. Wallace
Gordon Wallace
The production and use of polymer nanofibre assemblies prepared by electrospinning is now widespread. It is known that the tensile properties of electrospun polymer fibres can be different to those of bulk polymers. Here, we report a general method for measuring the tensile properties of individual electrospun nanofibres that employs a commercial atomic force microscope. Methods for preparing samples, force calibration and calculation of tensile stress and strain are described along with error estimation. By appropriate choice of AFM cantilever, it is shown that the tensile stress-strain curves can be measured for glassy, rubbery and gel polymer nanofibres. Testing can …
Cell Attachment And Proliferation On High Conductivity Pedot-Glycol Composites Produced By Vapour Phase Polymerisation, Elise M. Stewart, Manrico Fabretto, Mischa Mueller, Paul J. Molino, Hans J. Griesser, Robert D. Short, Gordon G. Wallace
Cell Attachment And Proliferation On High Conductivity Pedot-Glycol Composites Produced By Vapour Phase Polymerisation, Elise M. Stewart, Manrico Fabretto, Mischa Mueller, Paul J. Molino, Hans J. Griesser, Robert D. Short, Gordon G. Wallace
Gordon Wallace
High conductivity poly(3,4-ethylene dioxythiophene) (PEDOT) was synthesised using vacuum vapour phase polymerization (VVPP). The process produces PEDOT composites which incorporate glycol within the polymer. To assess biocompatibility, a suite of analytical techniques were utilised in an effort to characterise the level of glycol present and its impact on cell attachment and proliferation. A small decrease in fibroblast cell attachment and proliferation was observed with increasing glycol content within the PEDOT composite. Keratinocyte cell attachment and proliferation by comparison showed an increase. As such, the results herein indicate that cell attachment and proliferation depends on the individual cell lines used and …
High Strain Stretchable Solid Electrolytes, Sureyya Saricilar, Dennis Antiohos, Kewei Shu, Philip G. Whitten, Klaudia Wagner, Caiyun Wang, Gordon G. Wallace
High Strain Stretchable Solid Electrolytes, Sureyya Saricilar, Dennis Antiohos, Kewei Shu, Philip G. Whitten, Klaudia Wagner, Caiyun Wang, Gordon G. Wallace
Gordon Wallace
Wearable electronic devices that can be integrated seamlessly into clothing for monitoring and feedback need to be not only flexible, but also stretchable with low stiffness. Currently there are few solid electrolytes that are sufficiently stretchable for wearable electronic devices. Here we report stretchable solid electrolytes that can be elastically stretched more than 500% of their original length with ionic conductivities as high as 7 x 10(-5) S cm(-1) and tensile breaking strengths larger than 1.5 MPa. These solid electrolytes consist of poly(methyl methacrylate) chemical networks solvated by an electrochemically stable ionic liquid. A stretchable supercapacitor was demonstrated by coating …
Extrusion Printing Of Ionic-Covalent Entanglement Hydrogels With High Toughness, Shannon Bakarich, Marc In Het Panhuis, Stephen T. Beirne, Gordon G. Wallace, Geoffrey Maxwell Spinks
Extrusion Printing Of Ionic-Covalent Entanglement Hydrogels With High Toughness, Shannon Bakarich, Marc In Het Panhuis, Stephen T. Beirne, Gordon G. Wallace, Geoffrey Maxwell Spinks
Gordon Wallace
Three-dimensional (3D) printing of hydrogels has recently been investigated for use in tissue engineering applications. One major limitation in the use of synthetic hydrogels is their poor mechanical robustness but the development of ‘tough hydrogels’ in conjunction with additive fabrication techniques will accelerate the advancement of many technologies including soft robotics, bionic implants, sensors and controlled release systems. This article demonstrates that ionic–covalent entanglement (ICE) gels can be fabricated through a modified extrusion printing process that facilitates in situ photopolymerisation. The rheological properties of alginate–acrylamide hydrogel precursor solutions were characterised to develop formulations suitable for extrusion printing. A range of …
Exploiting High Quality Pedot:Pss-Swnt Composite Formulations For Wet-Spinning Multifunctional Fibers, Rouhollah Jalili, Joselito M. Razal, Gordon G. Wallace
Exploiting High Quality Pedot:Pss-Swnt Composite Formulations For Wet-Spinning Multifunctional Fibers, Rouhollah Jalili, Joselito M. Razal, Gordon G. Wallace
Gordon Wallace
In order to exploit the inherent properties of carbon nanotubes (CNT) in any polymer composite, systematic control of carbon nanotube loading and protocols that mitigate against CNT bundling are required. If such composites are to be rendered in fiber form via wet-spinning, then CNT bundling during the coagulation process must also be avoided. Here we have achieved this by utilizing highly exfoliated single walled carbon nanotubes (SWNT) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonicacid) (PEDOT:PSS) to obtain wet-spinnable composite formulations at various nanotube volume fractions (Vf). The addition of only 0.02 Vf of aggregate-free and individually dispersed SWNT resulted in a significant enhancement of modulus, …
Formation Of Magnesium Diboride-Based Materials With High Critical Currents And Mechanical Characteristics By High-Pressure Synthesis, Tetiana Prikhna, W. Gawalek, Ya M. Savchuk, N. V. Sergienko, V. E. Moshchil, M. Wendt, M. Zeisberger, T. Habisreuther, V. B. Sverdun, S X. Dou, S. N. Dub, V. S. Melnikov, Ch Schmidt, J. Dellith, P. A. Nagorny
Formation Of Magnesium Diboride-Based Materials With High Critical Currents And Mechanical Characteristics By High-Pressure Synthesis, Tetiana Prikhna, W. Gawalek, Ya M. Savchuk, N. V. Sergienko, V. E. Moshchil, M. Wendt, M. Zeisberger, T. Habisreuther, V. B. Sverdun, S X. Dou, S. N. Dub, V. S. Melnikov, Ch Schmidt, J. Dellith, P. A. Nagorny
Shi Xue Dou
The developed method of high-pressure synthesis (HPS) allows producing nanostructural highly dense material based on MGB2, which possesses the highest superconducting and mechanical characteristics among the known world analogues, in the form of blocks that are suitable for application in SC electromotors and pumps. Additions of Zr can increase critical current density (jc) of synthesized at 2 GPa and 750-800 °C MGB2 in the same manner as additions of Ta or Ti, i.e. due to the absorption of impurity hydrogen forming the ZrH2. The formation of ZrB2 phase at higher synthesis temperatures (about 950 °C) in HPS MGB2 does not …
Three-Dimensional-Network Li3v2(Po4) 3/C Composite As High Rate Lithium Ion Battery Cathode Material And Its Compatibility With Ionic Liquid Electrolytes, Jiantie Xu, Shulei Chou, Cuifeng Zhou, Qinfen Gu, Hua-Kun Liu, S X. Dou
Three-Dimensional-Network Li3v2(Po4) 3/C Composite As High Rate Lithium Ion Battery Cathode Material And Its Compatibility With Ionic Liquid Electrolytes, Jiantie Xu, Shulei Chou, Cuifeng Zhou, Qinfen Gu, Hua-Kun Liu, S X. Dou
Shi Xue Dou
A high performance Li3V2(PO4)3 cathode material for lithium ion batteries was synthesized by the microwave-assisted hydrothermal method followed by a post annealing process. The synchrotron X-ray diffraction analysis results confirmed that single-phase Li3V2(PO4)3 with monoclinic structure was obtained. Scanning electron microscope and transmission electron microscope images revealed that the as-prepared Li3V 2(PO4)3 was composed of nanowires and microsized particles. Electrochemical results demonstrated that the Li 3V2(PO4)3 electrode measured at 10 C after 500 cycles can deliver discharge capacities of 85.4 mAh g-1 and 103.4 mAh g-1, with a capacity retention of 99.3% and 95.9%, in the voltage ranges of 3.0-4.3 …
Synergetic Combination Of Limd With Chpd For The Production Of Economical And High Performance Mgb2 Wires, Minoru Maeda, Md Shahriar Ai Hossain, Ashkan Motaman, Jung Ho Kim, Anna Kario, Matt Rindfleisch, Mike Tomsic, S X. Dou
Synergetic Combination Of Limd With Chpd For The Production Of Economical And High Performance Mgb2 Wires, Minoru Maeda, Md Shahriar Ai Hossain, Ashkan Motaman, Jung Ho Kim, Anna Kario, Matt Rindfleisch, Mike Tomsic, S X. Dou
Shi Xue Dou
We propose an economical fabrication concept, the localized internal magnesium diffusion (IMD) method. Instead of using a single magnesium (Mg) rod in the center of a metal sheath tube, we use large-sized Mg particles (20-50 mesh) mixed well with cheap 97% crystalline boron powder to fill the metal sheath tube. After a repeated drawing process, the coarse Mg is elongated along the core wire axis of the metal sheath tube. Textured MgB2 grains are then formed during the sintering process. In the localized IMD process, however, there is still a need to improve the overall density. In order to increase …
A Hybrid Electrolyte Energy Storage Device With High Energy And Long Life Using Lithium Anode And Mno2 Nanoflake Cathode, Shulei Chou, Yun-Xiao Wang, Jiantie Xu, Jia-Zhao Wang, Hua-Kun Liu, S X. Dou
A Hybrid Electrolyte Energy Storage Device With High Energy And Long Life Using Lithium Anode And Mno2 Nanoflake Cathode, Shulei Chou, Yun-Xiao Wang, Jiantie Xu, Jia-Zhao Wang, Hua-Kun Liu, S X. Dou
Shi Xue Dou
A hybrid electrolyte energy storage system combining the features of supercapacitors and lithium batteries has been constructed. It consists of MnO2 nanoflakes in 1 M Li2SO4 aqueous electrolyte as the cathode and lithium foil in ionic liquid (1 M lithium bis(trifluoromethanesulfonyl)imide (LiNTf2) in N-methyl-N-propyl pyrrolidinium bis(trifluoromethanesulfonyl)imide ([C(3)mpyr][NTf2])) electrolyte as the anode, separated by a lithium super ionic conductor glass ceramic film (LiSICON). This system shows the advantages of both a supercapacitor (long cycle life) and a lithium battery (high energy), as well as low cost and improved safety due to the combination of ionic liquid and ceramic solid state electrolyte …
The Electrochemical Properties Of High-Capacity Sulfur/Reduced Graphene Oxide With Different Electrolyte Systems, Yunxiao Wang, Shulei Chou, Hua-Kun Liu, S X. Dou
The Electrochemical Properties Of High-Capacity Sulfur/Reduced Graphene Oxide With Different Electrolyte Systems, Yunxiao Wang, Shulei Chou, Hua-Kun Liu, S X. Dou
Shi Xue Dou
The lithium/sulfur battery is a promising electrochemical system with high capacity, which is well-known to undergo a complex multistep reaction during the discharge process. Two types of electrolytes including poly (ethylene glycol) dimethyl ether (PEGDME)-based and 1.3 - dioxolane (DOL)/ dimethoxyethane (DME)-based electrolytes were investigated here. Furthermore, LiNO3 additive was introduced into the electrolyte in order to effectively eliminate the overcharge effect. The lithium sulfur battery with 1.0 M LiN(CF3SO2)2 in PEGME with 0.1 M LiNo3 shows highly stable reversible capacity of 624.8 mAh g-1 after 200 cycles and improved average coulombic efficiency of 98 percent.
Comparison Of Small-Field Behaviour In Mgb2, Low And High Temperature Superconductors, Alexey V. Pan, S X. Dou
Comparison Of Small-Field Behaviour In Mgb2, Low And High Temperature Superconductors, Alexey V. Pan, S X. Dou
Shi Xue Dou
Different types of superconductors have been investigated at small magnetic fields (Ba) over wide temperature (T) ranges at different Ba orientations. It has been shown that the temperature dependence of the characteristic field (B*), separating the Ba-independent critical current density (Jc) plateau (single vortex pinning regime) and the region with Jc(Ba) (collective pinning), can be attributed either to the temperature dependence of the magnetic penetration depth for Nb-film and MgB2bulk superconductors, or to thermally activated processes for Bi-based superconductors and YBa2Cu3O7−δ superconducting films. In both cases the vortex pinning influence appears to have a secondary role, affecting the effective vortex …
Band Structures, Magnetic Properties, And Enhanced Magnetoresistance In The High Pressure Phase Of Gd And Y Doped Two-Dimensional Perovskite Sr2coo4 Compounds, Xiaolin Wang, E Takayama-Muromachi, S X. Dou, Zhenxiang Cheng
Band Structures, Magnetic Properties, And Enhanced Magnetoresistance In The High Pressure Phase Of Gd And Y Doped Two-Dimensional Perovskite Sr2coo4 Compounds, Xiaolin Wang, E Takayama-Muromachi, S X. Dou, Zhenxiang Cheng
Shi Xue Dou
The authors present their studies on the band structures and on the magnetic and magnetotransport properties of the high pressure phase of Sr2-xRExCoO4 [rare earth (RE)=Gd and Y, x=0.1-0.5] compounds which were synthesized by a high pressure and high temperature technique. The authors found that as x increases, the magnetoresistance {(PH-P0)/p0} increases up to -17% at 5 K and 7 T, which is 2.5 times higher than that for undoped Sr2CoO4, although the ferromagnetic transition drops from 255 to 200 K for the Gd doping with x=0.3. The saturation moments at low temperature are significantly enhanced for the Gd doped …
The Role Of Unbound Oligomers In The Nucleation And Growth Of Electrodeposited Polypyrrole And Method For Preparing High Strength, High Conductivity Films, Wen Zheng, Joselito M. Razal, Geoffrey M. Spinks, Van-Tan Truong, Philip G. Whitten, Gordon G. Wallace
The Role Of Unbound Oligomers In The Nucleation And Growth Of Electrodeposited Polypyrrole And Method For Preparing High Strength, High Conductivity Films, Wen Zheng, Joselito M. Razal, Geoffrey M. Spinks, Van-Tan Truong, Philip G. Whitten, Gordon G. Wallace
Gordon Wallace
Polypyrrole is a material with immensely useful properties suitable for a wide range of electrochemical applications, but its development has been hindered by cumbersome manufacturing processes. Here we show that a simple modification to the standard electrochemical polymerization method produces polypyrrole films of equivalently high conductivity and superior mechanical properties in one-tenth of the polymerization time. Preparing the film as a series of electrodeposited layers with thorough solvent washing between layering was found to produce excellent quality films even when layer deposition was accelerated by high current. The washing step between the sequentially polymerized layers altered the deposition mechanism, eliminating …