Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 17 of 17
Full-Text Articles in Physical Sciences and Mathematics
A New Method For Optimal Expansion Planning In Electrical Energy Distributionnetworks With Distributed Generation Resources Considering Uncertainties, Amir Masoud Mohaghegh, S Yaser Derakhshandeh, Abbas Kargar
A New Method For Optimal Expansion Planning In Electrical Energy Distributionnetworks With Distributed Generation Resources Considering Uncertainties, Amir Masoud Mohaghegh, S Yaser Derakhshandeh, Abbas Kargar
Turkish Journal of Electrical Engineering and Computer Sciences
The present study aims to introduce a robust model for distribution network expansion planning considering system uncertainties. The proposed method determines optimal size and placement of distributed generation resources, as well as installation and reinforcement of feeders and substations. This model is designed to minimize cost and to determine the best time for the installation of equipment in the expansion planning. In the proposed expansion planning, the fuzzy logic theory is employed to model uncertainties of loads and energy price. Also, since the proposed model is a nonlinear and nonconvex optimization problem, a tri-stage algorithm is developed to solve it. …
Reliability Comparisons Of Mobile Network Operators: An Experimental Case Study From A Crowdsourced Dataset, Engi̇n Zeydan, Ahmet Yildirim
Reliability Comparisons Of Mobile Network Operators: An Experimental Case Study From A Crowdsourced Dataset, Engi̇n Zeydan, Ahmet Yildirim
Turkish Journal of Electrical Engineering and Computer Sciences
It is of great interest for Mobile Network Operators (MNOs) to know how well their network infrastructure performance behaves in different geographical regions of their operating country compared to their horizontal competitors. However, traditional network monitoring and measurement methods of network infrastructure use limited numbers of measurement points that are insufficient for detailed analysis and expensive to scale using an internal workforce. On the other hand, the abundance of crowdsourced content can engender various unforeseen opportunities for MNOs to cope with this scaling problem. This paper investigates end-to-end reliability and packet loss (PL) performance comparisons of MNOs using a previously …
An Efficient Reliability Simulation Tool For Lifetime-Aware Analog Circuit Synthesis, Engi̇n Afacan
An Efficient Reliability Simulation Tool For Lifetime-Aware Analog Circuit Synthesis, Engi̇n Afacan
Turkish Journal of Electrical Engineering and Computer Sciences
Time-dependent degradation (aging) has become more severe in modern CMOS technologies. Therefore, it is highly critical to capture the variation effects and design reliable circuits against aging. Simulation of time-dependent variations is quite complicated since the degradation is a function of time, where the step count of simulation directly affects the accuracy and the efficiency of the analysis. Commercial simulator tools use a constant step count during reliability simulations, in which choosing a large step count degrades the efficiency whereas keeping it small may result in accuracy problems. To overcome this bottleneck, a couple of different approaches have been proposed …
Tapu: Test And Pick Up-Based $K$-Connectivity Restoration Algorithm For Wireless Sensor Networks, Vahi̇d Khali̇lpour Akram, Orhan Dağdevi̇ren
Tapu: Test And Pick Up-Based $K$-Connectivity Restoration Algorithm For Wireless Sensor Networks, Vahi̇d Khali̇lpour Akram, Orhan Dağdevi̇ren
Turkish Journal of Electrical Engineering and Computer Sciences
A $k$-connected wireless sensor network remains connected if any $k$-1 arbitrary nodes stop working. The aim of movement-assisted $k$-connectivity restoration is to preserve the $k$-connectivity of a network by moving the nodes to the necessary positions after possible failures in nodes. This paper proposes an algorithm named TAPU for $k$-connectivity restoration that guarantees the optimal movement cost. Our algorithm improves the time and space complexities of the previous approach (MCCR) in both best and worst cases. In the proposed algorithm, the nodes are classified into safe and unsafe groups. Failures of safe nodes do not change the $k$ value of …
Novel Node Deployment Scheme And Reliability Quantitative Analysis For An Iot-Based Monitoring System, Yinghua Tong, Liqin Tian, Jing Li
Novel Node Deployment Scheme And Reliability Quantitative Analysis For An Iot-Based Monitoring System, Yinghua Tong, Liqin Tian, Jing Li
Turkish Journal of Electrical Engineering and Computer Sciences
The Internet of things (IoT) is highly suitable for military, environmental, agricultural, and other remote real-time monitoring applications. A reliable topology ensures a stable and dependable monitoring system. Considering the research of an IoT-based air pollution monitoring system for industrial emissions as background, this study proposes a novel dual redundant node deployment scheme. Specifically, hexagonal clustering is proposed for the internal regions. In addition, relationship and quantification formulas for a monitoring area are presented, and the communication range, total number of layers of the topology, and number of cluster headers are determined. Interruptions in a monitoring system may reduce the …
Novel Representations For A Coherent Threshold Reliability System: A Tale Of Eightsignal Ow Graphs, Ali Muhammad Rushdi, Alaa Mohammad Alturki
Novel Representations For A Coherent Threshold Reliability System: A Tale Of Eightsignal Ow Graphs, Ali Muhammad Rushdi, Alaa Mohammad Alturki
Turkish Journal of Electrical Engineering and Computer Sciences
A threshold system is a reliability system whose success/failure is a threshold switching function in the successes/failures of its components. A coherent system (CS) is one that is causal, monotone, and with relevant components. The coherent threshold system (CTS), typically called the weighted k-out-of-n system, is consequently described by strictly positive weights and threshold. This paper presents recursive relations as well as boundary conditions for eight entities pertaining to a CTS. These are (a) expressions of monoform literals as well as disjoint or probability- ready expressions for either system success or failure, and (b) all-additive formulas as well as inclusion-exclusion …
Reliable Data Gathering In The Internet Of Things Using Artificial Bee Colony, Samad Najjar-Ghabel, Shamim Yousefi, Leili Farzinvash
Reliable Data Gathering In The Internet Of Things Using Artificial Bee Colony, Samad Najjar-Ghabel, Shamim Yousefi, Leili Farzinvash
Turkish Journal of Electrical Engineering and Computer Sciences
The Internet of Things (IoT) technology enables physical devices to communicate with each other for preparing, gathering, and sharing hazard warnings or critical information without human intervention. With respect to emergency applications of IoT technology, an essential issue is to provide an efficient and robust scheme for data gathering. The proposed solution in the existing approaches is to construct a spanning tree over the IoT devices and collect data using the tree. The shortcoming of these algorithms is that they do not take into account the probability of device mobility or failure. In such cases, the spanning tree is split, …
Design Optimization Of A ĆUk Dc/Dc Converter Based On Reliability Constraints, Amirreza Zarrin Gharehkoushan, Mehdi Abapour, Amir Farakhor
Design Optimization Of A ĆUk Dc/Dc Converter Based On Reliability Constraints, Amirreza Zarrin Gharehkoushan, Mehdi Abapour, Amir Farakhor
Turkish Journal of Electrical Engineering and Computer Sciences
Recently, power electronic converters have widely been used in various applications. This has led to concerns about the reliability of power converters and, as a result, their optimal design has attracted a lot of attention. However, the reliability-based optimal design of the Ćuk DC-DC converter has not yet been studied. A new methodology is presented here for the optimal design of the Ćuk converter based on reliability constraints. In this study, the converter is designed to minimize power losses in order to maximize the mean time to failure of the converter. A genetic algorithm is used as the optimization technique, …
Designing A Regulatory Framework For Efficient Integration Of Distributed Generation Technologies, Mohammad Jooshaki, Ali Abbaspour, Mahmud Fotuhi Firuzabad, Moein Moeini-Aghtaie
Designing A Regulatory Framework For Efficient Integration Of Distributed Generation Technologies, Mohammad Jooshaki, Ali Abbaspour, Mahmud Fotuhi Firuzabad, Moein Moeini-Aghtaie
Turkish Journal of Electrical Engineering and Computer Sciences
This paper focuses on the designing procedure of a regulatory framework in distribution networks with the main goal being to facilitate the integration of distributed generation (DG) units. The proposed framework is based on the concept of the reward penalty scheme (RPS) and creates effective financial incentives for distribution companies (DISCOs) in improving the quality of their services by applying DG units. To achieve this goal, reliability indices and annual energy losses of a distribution network are considered as two significant measures used in designing the structure of several RPSs. Employing these schemes, the regulators can quantify the quality of …
Optimization Of Grid Connected Micro-Grid Consisting Of Pv/Fc/Uc With Considered Frequency Control, Hamid Hasanzadehfard, Masoud Moghaddas-Tafreshi, Sayed Mehdi Hakimi
Optimization Of Grid Connected Micro-Grid Consisting Of Pv/Fc/Uc With Considered Frequency Control, Hamid Hasanzadehfard, Masoud Moghaddas-Tafreshi, Sayed Mehdi Hakimi
Turkish Journal of Electrical Engineering and Computer Sciences
In this paper, ultracapacitors are used as short-term storages for the frequency control of grid-connected microgrid that consists of photovoltaic panels, fuel cells, and the battery packs as long-term storages. Fuel cells and battery packs have delays in load tracking; therefore, ultracapacitors are used to compensate for the sudden power fluctuations in the microgrid that occur due to the output power uncertainty of the PV arrays and the loads required in the microgrid, as well as the sudden interruption of the main grid. The microgrid consists of interruptible and uninterruptible loads. When the total produced power in the microgrid, in …
Reliability Assessment Of A Standalone Wind-Conventional/Energy Storage System Using Probabilistic Production Simulation Method, Hossein Delavaripour, Behzad Mirzaeian Dehkordi
Reliability Assessment Of A Standalone Wind-Conventional/Energy Storage System Using Probabilistic Production Simulation Method, Hossein Delavaripour, Behzad Mirzaeian Dehkordi
Turkish Journal of Electrical Engineering and Computer Sciences
This paper presents a reliability evaluation technique for a small standalone system including wind and conventional resources integrated with an energy storage system. A battery bank is considered as the energy storage system. The focus in this analysis is on the effect of battery modeling and its performance on system reliability. In this way, this paper presents an accurate model for the electrochemical batteries, which takes into account all the influential characteristics of the battery related to reliability studies, such as depth of charge, efficiency of charge, and rate of discharge. The proposed reliability evaluation method is based on the …
Improving The Drain-Current Expression Of Bsim4 For Hot-Carrier Degradation Modeling That Is Suitable For Analog Applications, Gürsel Düzenli̇
Improving The Drain-Current Expression Of Bsim4 For Hot-Carrier Degradation Modeling That Is Suitable For Analog Applications, Gürsel Düzenli̇
Turkish Journal of Electrical Engineering and Computer Sciences
The reliability evaluation of MOS transistors is one of the most important subjects in device engineering and VLSI design. The down-scaling of device dimensions adversely affects device reliability and lifetime. Although different factors contribute to device reliability and lifetime, the most influential factor is hot-carrier degradation. Furthermore, hot-carrier degradation affects each application uniquely. In analog applications, hot-carrier degradation is more complex and diverse relative to digital applications. In this study, we improve the BSIM4 drain-current model to develop a hot-carrier degradation model that is suitable for both analog and digital applications. Our approach is readily applicable to all process technologies …
Competitive Unit Maintenance Scheduling In A Deregulated Environment Based On Preventing Market Power, Hessam Golmohamadi, Maryam Ramezani, Hamid Falaghi
Competitive Unit Maintenance Scheduling In A Deregulated Environment Based On Preventing Market Power, Hessam Golmohamadi, Maryam Ramezani, Hamid Falaghi
Turkish Journal of Electrical Engineering and Computer Sciences
With the advent of electricity markets, the traditional approach to unit maintenance scheduling (UMS) needs to undergo major changes in order to be compatible with competitive environment structures. The transition from a vertical power system to a competitive structure makes many challenges for policymakers and market designers. In this paper, a new approach to UMS in competitive electricity markets is presented. The main part of this study involves both how to treat generating companies (GENCOs) fairly and how to guarantee power system security during the maintenance scheduling. This paper advances the UMS in the electricity market so that one can …
Implementation Of An Ac Model For Transmission Expansion Planning Considering Reliability Constraints, Amin Mahmoudabad, Masoud Rashidinejad, Majid Zeinaddini-Meymand, Mohsen Rahmani
Implementation Of An Ac Model For Transmission Expansion Planning Considering Reliability Constraints, Amin Mahmoudabad, Masoud Rashidinejad, Majid Zeinaddini-Meymand, Mohsen Rahmani
Turkish Journal of Electrical Engineering and Computer Sciences
In this paper, a hybrid heuristic methodology that employs fuzzy logic for solving the AC transmission network expansion planning (AC-TEP) problem is presented. An enhanced constructive heuristic algorithm aimed at obtaining a significant quality solution for such complicated problems considering contingency is proposed. In order to indicate the severity of the contingency, 2 performance indices, namely the line flow performance index and voltage performance index, are calculated. An interior point method is applied as a nonlinear programming solver to handle such nonconvex optimization problems, while the objective function includes the costs of the new transmission lines as well as the …
On The Degradation Of Ota-C--Based Cmos Low-Power Filter Circuits For Biomedical Instrumentation, Yasi̇n Özçelep, Ayten Kuntman, Hulusi̇ Hakan Kuntman
On The Degradation Of Ota-C--Based Cmos Low-Power Filter Circuits For Biomedical Instrumentation, Yasi̇n Özçelep, Ayten Kuntman, Hulusi̇ Hakan Kuntman
Turkish Journal of Electrical Engineering and Computer Sciences
In this work, we propose a degraded transistor-based circuit degradation simulation method to investigate the degradation effect in complementary metal-oxide semiconductor (CMOS) biomedical devices. The method is demonstrated on an operational transconductance amplifier and capacitor (OTA-C)-based CMOS filter structure. First, we simulate the degradation of the symmetrical CMOS OTA by determining the degraded transistors in the structure. The simulation results are compared with the experimental results of our previous study. First- and second-order low-pass filter degradations are also simulated to demonstrate the accuracy of the proposed method. Finally, the degradation in the electroencephalogram band-pass filter and its effect on the …
An Extended Component-Based Reliability Model For Protective Systems To Determine Routine Test Schedule, Amir Abbarin, Mahmoud Fotuhi Firuzabad, Aydoğan Özdemi̇r
An Extended Component-Based Reliability Model For Protective Systems To Determine Routine Test Schedule, Amir Abbarin, Mahmoud Fotuhi Firuzabad, Aydoğan Özdemi̇r
Turkish Journal of Electrical Engineering and Computer Sciences
This paper presents a novel approach for evaluating the reliability of protective systems taking into account its components reliability. In this paper, a previously proposed extended model is used for a directional over-current scheme. In the extended model, the impacts of individual protective components are taken into account. An optimum routine test schedule is determined for each protective component as a separate unit. A comparison is made to show that the proposed approach has excellence over conventional routine test inspections. Impacts of factors such as circuit breaker inadvertent opening, required time for performing routine test inspections, human mistakes and self-checking …
A Study On The Reliability Of Polyester Insulators Blended With Borax, Aysel Ersoy, Yasi̇n Özcelep, Ayten Kuntman
A Study On The Reliability Of Polyester Insulators Blended With Borax, Aysel Ersoy, Yasi̇n Özcelep, Ayten Kuntman
Turkish Journal of Electrical Engineering and Computer Sciences
Tracking is the main factor which limits the safe working electric stress of insulation in power system applications. Polymer samples have been tested in laboratory conditions according to ASTM D2303 on accelerated inclined plane tracking test. In this paper, a model based on improved Weibull statistics is proposed for estimating the breakdown time of polymeric insulating materials with borax. The confidence intervals of the Weibull shape parameter and the Weibull scale parameter are determined for the borax concentration values using the Weibull 7++ program.