Physical Sciences and Mathematics Commons^™

A Review Of Pesticide Fate And Transport Simulation At Watershed Level Using Swat: Current Status And Research Concerns, Ruoyu Wang

Ruoyu Wang

Nitrate Runoff Contributing From The Agriculturally Intensive San Joaquin River Watershed To Bay-Delta In California, Ruoyu Wang

Ruoyu Wang

Environmental Fate And Impact Assessment Of Thiobencarb Application In California Rice Fields Using Ricewq, Ruoyu Wang

Ruoyu Wang

Modeling Pesticide Fate And Transport At Watershed Scale Using The Soil & Water Assessment Tool: General Applications And Mitigation Strategies, Ruoyu Wang

Ruoyu Wang

Call For Abstracts - Resrb 2019, July 8-9, Wrocław, Poland, Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Integrating Multimedia Models To Assess Nitrogen Losses From The Mississippi River Basin To The Gulf Of Mexico, Ruoyu Wang

Ruoyu Wang

Input Uncertainty On Watershed Modeling: Evaluation Of Precipitation And Air Temperature Data By Latent Variables Using Swat, Ruoyu Wang

Ruoyu Wang

Predication Of The Sources Of Particulate Polycyclic Aromatic Hydrocarbons In China With Distinctive Characteristics Based On Multivariate Analysis, Ruoyu Wang

Ruoyu Wang

Resilience Is A Property Of A System And A Network, Igor Linkov, Benjamin D. Trump, Jeffrey Keisler

Jeffrey Keisler

Internet Enabled Remote Driving Of A Combat Hybrid Electric Power System For Duty Cycle Measurement, Jarrett Goodell, Marc Compere, Wilford Smith, Mark Brudnak, Mike Pozolo, Et Al.

Marc Compere

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware, both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1,7]. This paper is written in the context of [1,7] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Energy System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

Harnessing Wastewater For Renewable Energy (2013-2), Aaron Adalja, Chalida U-Tapao

Aaron Adalja

This case study explores the options for using wastewater to produce renewable energy in the context of a public wastewater treatment plant. It provides an opportunity for students to synthesize knowledge from resource economics, engineering, environmental science, agriculture, and public policy to develop a transdisciplinary approach to a socio-environmental issue. The case is designed for upper division undergraduate courses in resource economics or environmental engineering, but several modifications are provided graduate course applications. Students assume the role of a newly hired analyst at a consulting firm in Washington, DC, that specializes in renewable energy solutions. They are charged with proposing …

Assessing Public Health Burden Associated With Exposure To Ambient Black Carbon In The United States, Ying Li, Daven K. Henze, Darby Jack, Barron H. Henderson, Patrick L. Kinney

Ying Li

Black carbon (BC) is a significant component of fine particulate matter (PM2.5) air pollution, which has been linked to a series of adverse health effects, in particular premature mortality. Recent scientific research indicates that BC also plays an important role in climate change. Therefore, controlling black carbon emissions provides an opportunity for a double dividend. This study quantifies the national burden of mortality and morbidity attributable to exposure to ambient BC in the United States (US). We use GEOS–Chem, a global 3-D model of atmospheric composition to estimate the 2010 annual average BC levels at 0.5 x 0.667° resolution, and …

Mathematical Model Of The Shell With The Infill For Retaining Structures, Alexander T. Bekker, Nikita Ya. Tsimbelman, Dmitriy A. Potyanikhin, Andrey I. Mamontov, Ömer Bilgin, Tatiana I. Chernova

Ömer Bilgin

A description of finite element model and analysis of a shell with an infill is performed. A large diameter thin cylindrical shell structure with the edge leaning against compressible foundation soil is analyzed. Different materials are considered individually for the models of each structure shell and infill component (metal or reinforced concrete shell, and granular or elastic infill in a shell and foundation soil loaded by the structure). Contact conditions between 1) the infill and the shell’s inner surface and 2) between the foundation material and the shell edge are analyzed. An example of calculating strain conditions in the shell …

How To Establish Successful Cooperative Student Learning Centers For Stem Courses, Ronald James Bieniek, Douglas R. Carroll, Cesar Mendoza, Oran Allan Pringle, Ekkehard Sinn, Kai-Tak Wan, Donald C. Wunsch

Oran Pringle

Students learn more if they are actively involved in the learning process, particularly in a cooperative manner. Several UMR faculty have operated course-based learning centers (LCs) as part of the campus-wide Learning Enhancement Across Disciplines (LEAD) Program of student learning assistance and enhancement. LCs are designed to assist large numbers of students in a cost- and time-efficient manner that promotes student engagement without requiring undue amounts of faculty time. Course instructors spend time in the open learning environment of the LC, in lieu of office hours, guiding students to master course material and skills in their evolution from novice to …

The Quasi-Static Deformation, Failure, And Fracture Behavior Of Titanium Alloy Gusset Plates Containing Bolt Holes, Therese Hurtuk, Craig Menzemer, Anil Patnaik, Tirumalai Srivatsan, Kannan Manigandan, T. Quick

Craig Menzemer

In this article, the influence of bolt holes, specifically their number and layout on strength, deformation, and final fracture behavior of titanium alloy gusset plates under the influence of an external load is presented and discussed. Several plates having differences in both the number and layout of the bolt holes were precision machined and then deformed under quasi-static loading. The specific influence of number of bolt holes and their layout on maximum load-carrying capability and even fracture load was determined. The conjoint influence of bolt number, bolt layout pattern, nature of loading, contribution from local stress concentration, and intrinsic microstructural …

An Adaptive Level Set Approach For Modeling Damage Due To Galvanic Corrosion, Joseph Wilder, Curtis Clemons, Dmitry Golovaty, Kevin Kreider, Gerald Young, R. Lillard

Gerald W Young

This article presents an approach to solving problems related to galvanic corrosion that involve moving boundaries (due to preferential corrosion of one of the metals in the system). The method incorporates an adaptive (node based, finite difference) grid technique for the treatment of boundary-related singularities that arise in the calculation of the electric potential. Simulation of the time evolution of the damage done by the corroding interface is performed using of a level set formulation. An analysis of the convergence of the method and a comparison with experimental data from the literature are included.

An Adaptive Level Set Approach For Modeling Damage Due To Galvanic Corrosion, Joseph Wilder, Curtis Clemons, Dmitry Golovaty, Kevin Kreider, Gerald Young, R. Lillard

Kevin L. Kreider

This article presents an approach to solving problems related to galvanic corrosion that involve moving boundaries (due to preferential corrosion of one of the metals in the system). The method incorporates an adaptive (node based, finite difference) grid technique for the treatment of boundary-related singularities that arise in the calculation of the electric potential. Simulation of the time evolution of the damage done by the corroding interface is performed using of a level set formulation. An analysis of the convergence of the method and a comparison with experimental data from the literature are included.

An Adaptive Level Set Approach For Modeling Damage Due To Galvanic Corrosion, Joseph Wilder, Curtis Clemons, Dmitry Golovaty, Kevin Kreider, Gerald Young, R. Lillard

Curtis B. Clemons

This article presents an approach to solving problems related to galvanic corrosion that involve moving boundaries (due to preferential corrosion of one of the metals in the system). The method incorporates an adaptive (node based, finite difference) grid technique for the treatment of boundary-related singularities that arise in the calculation of the electric potential. Simulation of the time evolution of the damage done by the corroding interface is performed using of a level set formulation. An analysis of the convergence of the method and a comparison with experimental data from the literature are included.

The Quasi-Static Deformation, Failure, And Fracture Behavior Of Titanium Alloy Gusset Plates Containing Bolt Holes, Therese Hurtuk, Craig Menzemer, Anil Patnaik, Tirumalai Srivatsan, Kannan Manigandan, T. Quick

Anil Patnaik

In this article, the influence of bolt holes, specifically their number and layout on strength, deformation, and final fracture behavior of titanium alloy gusset plates under the influence of an external load is presented and discussed. Several plates having differences in both the number and layout of the bolt holes were precision machined and then deformed under quasi-static loading. The specific influence of number of bolt holes and their layout on maximum load-carrying capability and even fracture load was determined. The conjoint influence of bolt number, bolt layout pattern, nature of loading, contribution from local stress concentration, and intrinsic microstructural …

Bioactive Surface Modification Of Metal Oxides Via Catechol-Bearing Modular Peptides: Multivalent-Binding, Surface Retention, And Peptide Bioactivity, Wen Tang, Gina Policastro, Geng Hua, Kai Guo, Chrys Wesdemiotis, Gary Doll, Matthew Becker

Gary L. Doll

A series of multivalent dendrons containing a bioactive osteogenic growth peptide (OGP) domain and surface-binding catechol domains were obtained through solid phase synthesis, and their binding affinity to hydroxyapatite, TiO2, ZrO2, CeO2, Fe3O4 and gold was characterized using a quartz crystal microbalance with dissipation (QCM-d). Using the distinct difference in binding affinity of the bioconjugate to the metal oxides, TiO2-coated glass slides were selectively patterned with bioactive peptides. Cell culture studies demonstrated the bioavailability of the OGP and that OGP remained on the surface for at least 2 weeks under in vitro cell culture conditions. Bone sialoprotein (BSP) and osteocalcein …

Bringing Football Back To Los Angeles, Gabriel Leiner

Gabriel Leiner

Identifying a suitable parcel for a large scale professional football stadium in the greater Los Angeles, CA area, which does not conflict with current uses, environmental protection codes, or airspace rights, and also has adequate transportation access and nearby populated neighborhoods.

Dis And Distributed Watershed Models I, Jurgen Garbrecht, Fred L. Ogden, Paul A. Debarry, David R. Maidment

Fred L. Ogden

The increasing proliferation of spatial data, geographic information systems (GIS), and models for hydrologic applications provide many new investigation opportunities but also present a number of challenges for the uninitiated water resources practitioner. This two-part paper is intended for the practicing engineer who wants to expand into the arena of spatial data and distributed watershed modeling. It provides an integrated overview of the multiple facets of data-GIS-modeling issues and a source of background information for selection and application of GIS in watershed modeling. This first paper addresses selected spatial data issues, data structures and projections, data sources, and information on …

Zespół Energii Odnawialnej I Zrównoważonego Rozwoju (Eozr), Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Driver Dynamics And The Longitudinal Control Model, Gabriel Leiner

Gabriel Leiner

Driver psychology is one of the most difficult phenomena to model in the realm of traffic flow theory because mathematics often cannot capture the human factors involved with driving a car. Over the past several decades, many models have attempted to model driver aggressiveness with varied results. The recently proposed Longitudinal Control Model (LCM) makes such an attempt, and this paper offers evidence of the LCM's usefulness in modeling road dynamics by analyzing deceleration rates that are commonly associated with various levels of aggression displayed by drivers. The paper is roughly divided into three sections, one outlining the LCM's ability …

Wastewater Treatment And Management At Oil Shale Plants, R. E. Hicks, R. F. Probstein, I. Wei, D. S. Farrier, J. Lotwala, T. E. Phillips

Irvine W. Wei

Laboratory tests have shown that the major wastewater streams produced during oil shale retorting can in principle be treated to a quality suitable for reuse within the plant. The wastewater stream condensed from the retort gases, here called the gas condensate, contains primarily dissolved gases (NH3, CO2 and some H2S) and organics as contaminants. In batch stripping tests it was found that the organics, which may be present at concentrations of up to 5,000 mg/l measured as COD, are volatile and can be stripped along with the ammonia down to about 500 mg/l COD. Retort waters, or wastewater streams that …

Dynamics Of Breakpoint Chlorination, Irvine Wei, J. Carrell Morris

Irvine W. Wei

No abstract provided.

Advanced Chemical Oxidation And Toxicity Reduction Of 2,4,6-Trichlorophenol By Using Fenton's Reagent: Part Ii, Dechlorination Kinetics, Somnath Basu, Venkat Sreenivasan, Irvine W. Wei

Irvine W. Wei

Laboratory investigation has shown that Fenton's Reagent is a very effective oxidant for 2,4,6-Trichlorophenol (TCP). The authors reported the first phase of this research, consisting of five different reactions of Fenton's Reagent on TCP, at the 1995 AIChE Summer National Meeting in Boston as Part I of this paper. The results demonstrated total removal of TCP, with almost complete release of aromatic ring bound chlorine atoms into chloride ions, significant reduction of TOC, and very importantly, significant toxicity reduction compared to the original substrate. These results suggested that Fenton's Reaction can be considered as a candidate process for treatment of …

Advanced Chemical Oxidation And Toxicity Reduction Of 2,4,6-Trichlorophenol By Using Fenton's Reagent: Part Iv, Reaction Mechanism And Kinetics, Somnath Basu, Irvine W. Wei

Irvine W. Wei

No abstract provided.

Evaluation Of Chlorine Emission Potential At The New Deer Island Wastewater Treatment Plant, Somnath Basu, Kenneth Shilinsky, Irvine Wei

Irvine W. Wei

The Massachusetts Water Resources Authority (MWRA) is currently constructing a 1,200 million gallon per day secondary wastewater treatment facility on Deer Island, in Boston Harbor. Chlorine, in the form of sodium hypochlorite solution, is purchased and barged to Deer Island for use in both effluent disinfection and odor scrubbing. The Process Engineering Department of Deer Island, as part of its on-going cost effectiveness program, is currently evaluating on-site generation of sodium hypochlorite. The technical analysis includes a thorough examination of the chemistry of production and storage, including potential losses to atmosphere. This paper presents an overview of that examination, defines …

Uv Disinfection Of Treated Wastewater Effluent: Influence Of Color, Reactivation And Regrowth Of Coliform Bacteria, Somnath Basu, Jack Page, Irvine Wei

Irvine W. Wei

Disinfection is a very important unit process to deactivate coliform bacteria in treated wastewater. However, regrowth potential of coliform bacteria raises human health and safety concerns associated with reuse of treated wastewater in various applications. Both post chlorination and post UV disinfection regrowth have been reported in the literature. In view of increasing use of recycled wastewater for reuse, it is necessary to address this phenomenon from both technical and regulatory standpoints. A case study of fecal coliform regrowth in a full scale operating plant is reported here. This is expected to aid in further understanding of the phenomenon and …