Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 30 of 57

Full-Text Articles in Physical Sciences and Mathematics

Decoding Usage And Adoption Behavior Of The Low-Carbon Transportation Market: An Ai-Driven Exploration, Vuban Chowdhury Dec 2023

Decoding Usage And Adoption Behavior Of The Low-Carbon Transportation Market: An Ai-Driven Exploration, Vuban Chowdhury

Graduate Theses and Dissertations

The transportation sector stands as a significant contributor to greenhouse gas emissions in the United States, with its environmental impact steadily escalating over the past few decades. This has prompted government agencies to facilitate the adoption and usage of low-carbon transportation (LCT) options as alternatives to fossil-fuel-powered transportation. LCTs include modes of transportation that minimize the overall carbon footprint of the transportation sector by relying on energy sources that are environmentally sustainable. These sustainable transportation options have also garnered significant interest in the transportation research community. For government agencies and researchers alike, a comprehensive understanding of the adoption and usage …


Verification Of Astm Centrifugation Equations For Soil Suction Determination, Esteban Maclein Miranda Pinzon Aug 2023

Verification Of Astm Centrifugation Equations For Soil Suction Determination, Esteban Maclein Miranda Pinzon

Graduate Theses and Dissertations

The unit correction constant (B) in the ASTM D6836 standard needs to be evaluated. The B-value was proposed to be 0.00548 instead of 0.00553. This apparent discrepancy led to an investigation comparing the predicted and measured suction values for high air entry (HAE) ceramic disks. A Beckman-Coulter Model J6-MI six-bay centrifuge and a WP4C Dewpoint Potentiameter were used in the testing program. HAE ceramic disks rated with bubbling pressures of 3-bar and 5-bar were used as analogue soil specimens. The HAE ceramic disks were spun in the small-scale centrifuge to apply prescribed suction amounts and then placed in the WP4C …


Sustainability And Health Impacts Of Pulse Crops In The United States Using Life Cycle Assessment, Prathamesh A. Bandekar Dec 2022

Sustainability And Health Impacts Of Pulse Crops In The United States Using Life Cycle Assessment, Prathamesh A. Bandekar

Graduate Theses and Dissertations

Environmental sustainability and human health impact of pulses produced and consumed in the United States was assessed using life cycle assessment (LCA). The study included three objectives 1) to estimate environmental impact of current production and consumption practices in the United States using attributional LCA; 2) to estimate environmental and human health impact of iso-caloric diets containing varying amounts of pulses using Hybrid-LCA and Combined Nutritional and Environmental-LCA (CONE-LCA); and 3) to estimate environmental impact of increased demand for pulses using consequential LCA. Scope of the study varied for each objective with system boundary encompassing cradle-to-grave activities for objective 1 …


Development Of Deep Shear Wave Velocity Profiles And An Approach To Generate Site Signature Consistent Pseudo Shear Wave Velocity Profiles In The Mississippi Embayment, Ashraf Kamal Himel Aug 2022

Development Of Deep Shear Wave Velocity Profiles And An Approach To Generate Site Signature Consistent Pseudo Shear Wave Velocity Profiles In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

This dissertation details the development of a surface wave method (SWM) technique to generate deep shear wave velocity profiles (VS profiles), applying this technique at 24 sites across the Mississippi embayment and developing an approach to generate pseudo site signature consistent VS profiles from velocity functions and fundamental frequency. In the presented SWM technique, active and passive source surface wave measurements are inverted along with fundamental frequency to develop a site signature consistent VS profile. Multiple transformation methods, including MSPAC, HRFK and FK are used to resolve experimental dispersion data from surface wave measurements. SWM VS profile at the Central …


Formation Of Reactive Nitrogen Species During Dichloramine Decay And Their Impact On N Nitrosodimethylamine Formation Under Drinking Water Conditions, Huong Thu Pham Dec 2021

Formation Of Reactive Nitrogen Species During Dichloramine Decay And Their Impact On N Nitrosodimethylamine Formation Under Drinking Water Conditions, Huong Thu Pham

Graduate Theses and Dissertations

NDMA occurrence and formation pathways in drinking water systems are reviewed and NDMA yields are compared on the basis of disinfectant type, water chemistry, and precursor category. In chloramination, despite monochloramine being the predominant species between pH 7-9, evidence suggests that dichloramine is the primary species involved in NDMA formation. This is somewhat confounding as NDMA yields are maximal at pH 9, yet at pH 9 dichloramine decays faster than it forms and hence is present at trace levels; additionally, the proposed mechanism involves a spin-forbidden incorporation of dissolved oxygen as a triplet, which is presumably kinetically slow. This review …


Evapotranspiration In Mid-South Rice Production, Colby Wade Reavis Dec 2021

Evapotranspiration In Mid-South Rice Production, Colby Wade Reavis

Graduate Theses and Dissertations

Rice provides much needed sustenance to a large portion of the global population, particularly in the developing world. With stress placed on food production systems under the reality of climate change and an increasing global population, rice production systems require solutions to a number of issues, including a limited water supply. As producers explore new strategies for conserving local water resources to continue to maintain yields, new irrigation strategies and technologies are being developed and validated for use at commercial production scales. Alternate wetting and drying (AWD) is an irrigation practice that provides water savings through the capture of rainfall …


Signal Processing And Data Analysis For Real-Time Intermodal Freight Classification Through A Multimodal Sensor System., Enrique J. Sanchez Headley Jul 2021

Signal Processing And Data Analysis For Real-Time Intermodal Freight Classification Through A Multimodal Sensor System., Enrique J. Sanchez Headley

Graduate Theses and Dissertations

Identifying freight patterns in transit is a common need among commercial and municipal entities. For example, the allocation of resources among Departments of Transportation is often predicated on an understanding of freight patterns along major highways. There exist multiple sensor systems to detect and count vehicles at areas of interest. Many of these sensors are limited in their ability to detect more specific features of vehicles in traffic or are unable to perform well in adverse weather conditions. Despite this limitation, to date there is little comparative analysis among Laser Imaging and Detection and Ranging (LIDAR) sensors for freight detection …


A Machine Learning Approach To Understanding Emerging Markets, Namita Balani Jul 2021

A Machine Learning Approach To Understanding Emerging Markets, Namita Balani

Graduate Theses and Dissertations

Logistic providers have learned to efficiently serve their existing customer bases with optimized routes and transportation resource allocation. The problem arises when there is potential for logistics growth in an emerging market with no previous data. The purpose of this work is to use industry data for previously known and well-documented markets to apply data analytic techniques such as machine learning to investigate the uncertainty in a new market. The thesis looks into machine learning techniques to predict miles per stop given historical data. It mainly focuses on Random Forest Regression Analysis, but concludes that additional techniques, such as Polynomial …


Shallow 3d Shear Wave Velocity Model And Revised Site Period Prediction Map For The Mexico City Basin, Rendon Martin Rieth May 2021

Shallow 3d Shear Wave Velocity Model And Revised Site Period Prediction Map For The Mexico City Basin, Rendon Martin Rieth

Graduate Theses and Dissertations

The goal of this study was to revise the existing site period prediction map and to develop a shallow 3D shear wave velocity model of the Mexico City Basin. To accomplish this goal, an extensive literature review was performed to compile as much pertinent shear wave velocity and site period data for the region. In total, 75 sites were used to revise the site period prediction map and 40 sites were used to develop the shear wave velocity model. The 2004 Complementary Technical Standards of Mexico site period prediction map was adjusted with new site period measurements across the basin …


When It Rains, It Pours: A Case Study Of Spatio-Temporal Variations In High-Intensity Precipitation Events In Arkansas, Deanna Mantooth-Hendrix May 2021

When It Rains, It Pours: A Case Study Of Spatio-Temporal Variations In High-Intensity Precipitation Events In Arkansas, Deanna Mantooth-Hendrix

Graduate Theses and Dissertations

Climate change is having an impact on weather systems and ecosystems worldwide. Glaciers are receding, oceans are acidifying, hurricanes are stronger, and extreme precipitation is increasing in frequency. Even with the wealth of data and knowledge about the threat of climate change, some places are slow to adapt because they think that the impact to their ecosystem will not be severe. The goal of this project was to determine if climate change is having an impact on extreme precipitation in the top urban areas of Arkansas. The major concern with an increase in extreme events in urban areas is flooding. …


Effect Of Citric Acid On Slump, Compressive Strength, And Setting Time Of Belitic Calcium Sulfoaluminate Concrete, Israel Aguilar Rosero Dec 2020

Effect Of Citric Acid On Slump, Compressive Strength, And Setting Time Of Belitic Calcium Sulfoaluminate Concrete, Israel Aguilar Rosero

Graduate Theses and Dissertations

Belitic calcium sulfoaluminate (BCSA) cement has well established advantages related to fast setting time, fast strength gain, long-term strengths, shrinkage, and sustainability. Due to its fast setting and hardening, this type of cement has historically been used to repair concrete structures, highways, and runways. This work provides much needed guidance on establishing mix design criteria for BCSA cement. Guidance is also given on the effects of set retarders on strength, slump, and setting times. Citric acid and a phosphonic acid-based admixture were tested as retarders for different concrete mixtures. Three studies were performed. In the slump study five different water …


Seismic Loading Effects Within Orthogonally Connected Steel Lateral Force Resisting Systems, Alhussin Faraj Aliwan Dec 2020

Seismic Loading Effects Within Orthogonally Connected Steel Lateral Force Resisting Systems, Alhussin Faraj Aliwan

Graduate Theses and Dissertations

Steel buildings located within seismically active regions require special design considerations to ensure public safety and prevent collapse during an extreme seismic event. Two commonly used steel systems are special moment frames (SMFs) and buckling-restrained braced frames (BRBFs). When two seismic systems share a common column in an orthogonal configuration (such as at a building corner), design specifications currently consider a 100+30 rule wherein the shared column is designed for 100% fuse demand in one direction, plus 30% fuse demand from the other direction. While this rule has been shown to be reasonable for elastic building response, a few studies …


On The Seismic Performance Of Skewed Special Moment Frame Reduced Beam Section Connections, Damaso Daniel Dominguez May 2020

On The Seismic Performance Of Skewed Special Moment Frame Reduced Beam Section Connections, Damaso Daniel Dominguez

Graduate Theses and Dissertations

Special Moment Frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs, as they provide lateral system stiffness without the use of braces which often obstruct views and architectural features. Reduced beam section (RBS) connections are popular SMF connection details developed following the Northridge earthquake to limit brittle fractures within connection welds. Current American Institute of Steel Construction (ASIC) provisions (i.e. AISC 341-16) provide prequalified SMF RBS connection details (including welding requirements); however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF RBS connections …


Development Of Vs Profiles And Site Periods In The Mexico City Basin, Landon Joel Woodfield May 2020

Development Of Vs Profiles And Site Periods In The Mexico City Basin, Landon Joel Woodfield

Graduate Theses and Dissertations

This study presents dynamic site characterization measurements at 25 sites within the Mexico City Basin. The primary focus of the testing was along the western edge of the Mexico City Basin. At each site, active source Multi-channel Analysis of Surface Waves (MASW) arrays and passive source Microtremor Array Measurements (MAM) L-arrays and circular arrays were used to acquire dispersion data. Horizontal to Vertical Spectral Ratio (HVSR) data was collected to determine site periods at each location. These experimental dispersion data and site periods were fit using a joint inversion of Rayleigh and Love wave dispersion data and HVSR site period …


Surface Modified Polypropylene Membranes For Treating Hydraulic Fracturing Produced Waters By Membrane Distillation, Tharaka Hawpe Gamage May 2020

Surface Modified Polypropylene Membranes For Treating Hydraulic Fracturing Produced Waters By Membrane Distillation, Tharaka Hawpe Gamage

Graduate Theses and Dissertations

Membrane distillation is an emerging technology for treating hydraulic fracturing flowback and produced waters. Suppression of membrane fouling by inorganic and polar and non-polar organic compounds is a challenge. Here polyhydroxyethyl methacrylate, polyacrylic acid, polvinylallyl imidazolium bromide and polyvinylhexyl imidazolium bromide chains have been grafted from the membrane surface. Fouling is initially due to adsorption of organic compounds followed by scale formation. When challenged with produced water, membranes modified with polvinylallyl imidazolium bromide chains provided the greatest resistance to fouling. For EC pretreated produced water and synthetic produced water that contained mainly inorganic species, the flux decline was much less.


Cytotoxicity And Mutagenicity Of Disinfection Byproduct Mixtures Formulated Using Free Chlorine And Monochloramine, Yonas Ghebremedhin Dec 2019

Cytotoxicity And Mutagenicity Of Disinfection Byproduct Mixtures Formulated Using Free Chlorine And Monochloramine, Yonas Ghebremedhin

Graduate Theses and Dissertations

Bioassays have been used extensively to assess various toxicity endpoints of drinking water disinfection byproducts (DBPs), but an emphasis on single compounds prevails. In this research, DBP mixtures were assessed using a cytotoxicity test with Chinese Hamster Ovary (CHO) cells and an Ames fluctuation test with Salmonella typhimurium TA-98 and TA-100 with and without S9 rat liver homogenate. Seven whole mixture DBP concentrates were formulated using reconstituted natural organic matter (NOM) extracts from the Upper Mississippi River using scaled disinfectant dosing protocols with free chlorine and monochloramine in the presence and absence of added bromide. DBPs were identified by gas …


Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow Dec 2019

Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow

Graduate Theses and Dissertations

Slope failures in the United States alone cause millions of dollars in damage to infrastructure, threaten national monuments, create environmental hazards, and take an average of 25-50 lives a year. With the inevitable construction that occurs on slopes, it is imperative that the slopes be properly designed which requires a thorough understanding of slope grade, subsurface soil conditions, soil strength parameters, water table locations, and depth to bedrock across the entire site. The preferred method of data collection would be to use borings and other in-situ methods; however, sometimes due to cost constraints or site accessibility only a very limited …


Surface Modification Of Pvdf Membranes For Treating Produced Waters By Direct Contact Membrane Distillation, Zahra Anari Dec 2019

Surface Modification Of Pvdf Membranes For Treating Produced Waters By Direct Contact Membrane Distillation, Zahra Anari

Graduate Theses and Dissertations

Direct contact membrane distillation is a promising unit operation for treating hydraulic fracturing flow back and produced water. However, while a hydrophobic membrane is essential to prevent the passage of water from the feed to the permeate side, fouling by dissolved organic species can compromise membrane performance and result in wetting of the membrane pores. Here four monomers, hydroxyethylmethacrylate, acrylic acid, 1-vinyl-3-allylimidazolium bromide, and 1-vinyl-3-hexylimidazolium bromide have been grafted from the surface of a PVDF membrane. The modified and base membranes were tested in a direct contact membrane distillation system. All membranes were challenged with real produced water. In addition, …


Suitability Assessment For Integrated Urban Development In Makkah City Of Saudi Arabia, Mislat Alotaibi Dec 2019

Suitability Assessment For Integrated Urban Development In Makkah City Of Saudi Arabia, Mislat Alotaibi

Graduate Theses and Dissertations

Makkah – the third most populated city in Saudi Arabia with a population of 1,684,408 according to the 2010 demographic survey conducted by the Saudi General Authority for Statistics – is experiencing urban sprawl, which can be defined as an unplanned urban expansion that might degrade the environment and diminish the aesthetic view. This is a persisting problem in Makkah driven by multitude of processes involving the random expansion in its undeveloped land and the removal of its historic mountains surrounding Al-Masjid Al-Haram (the Holy Mosque) in an attempt to push the city limit of urban capacity within its administrative …


Development Of A Multimode Instrument For Remote Measurements Of Unsaturated Soil Properties, Sean Elliott Salazar Aug 2019

Development Of A Multimode Instrument For Remote Measurements Of Unsaturated Soil Properties, Sean Elliott Salazar

Graduate Theses and Dissertations

The hydromechanical behavior of soil is governed by parameters that include the moisture content, soil matric potential, texture, and the mineralogical composition of the soil. Remote characterization of these and other key properties of the soil offers advantages over conventional in situ or laboratory-based measurements: information may be acquired rapidly over large, or inaccessible areas; samples do not need to be collected; and the measurements are non-destructive. A field-deployable, ground-based remote sensor, designated the Soil Observation Laser Absorption Spectrometer (SOLAS), was developed to infer parameters of bare soils and other natural surfaces over intermediate (100 m) and long (1,000 m) …


Utilizing The Hvsr Second Peak For Surface Wave Inversions In The Mississippi Embayment, Ashraf Kamal Himel Dec 2018

Utilizing The Hvsr Second Peak For Surface Wave Inversions In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

Ambient noise data from 24 sites within the Mississippi Embayment were analyzed to estimate the fundamental frequency using the horizontal to vertical spectral ratio (HVSR) method. The fundamental frequency ranged from 0.17 to 3.43 Hz for the tested sites. At seventeen of the sites, a second higher frequency HVSR peak, which ranged from 0.617 Hz to 2.154 Hz, was observed in addition to the fundamental HVSR peak. The second peak frequency in the HVSR curve has been attributed by previous researchers as either an odd harmonic of the fundamental peak or a shallow impedance contrast from the Memphis sand layer …


Fatigue Performance And Shear Demand Distributions Of Clustered Shear Connectors In Composite Bridge Girders, Brian David Hillhouse Dec 2018

Fatigue Performance And Shear Demand Distributions Of Clustered Shear Connectors In Composite Bridge Girders, Brian David Hillhouse

Graduate Theses and Dissertations

The current American Association of State Highway and Transportation Officials (AASHTO) Bridge Specifications assumes uniform shear flow demands at the steel-concrete interface of composite bridge girders. As stud pitch increases to beyond 24 in or as studs become clustered to account for pre-cast concrete decks, this assumed shear demand distribution may be unrepresentative. Understanding shear transfer and resulting demands on headed studs in composite beams are important for ensuring adequate composite design. This study investigates stud demands in composite bridge girders using large-scale fatigue testing and direct pressure measurements for stud force calculations. In this study, two large-scale composite beam …


Assessing Biofiltration Without Ozonation For Removal Of Trihalomethane Precursors In Drinking Water At The Beaver Water District Drinking Water Treatment Plant, Sana Ajaz Dec 2018

Assessing Biofiltration Without Ozonation For Removal Of Trihalomethane Precursors In Drinking Water At The Beaver Water District Drinking Water Treatment Plant, Sana Ajaz

Graduate Theses and Dissertations

Biofiltration without pre-ozonation has the capability to remove natural organic matter (NOM) fractions that serve as precursors of disinfection byproducts (DBPs), which include the four regulated trihalomethanes (THMs) and dichloroacetonitrile (DCAN). Rapid small-scale column tests (RSSCTs) and Pilot Plant filters operated at empty-bed contact times (EBCTs) of 4, 8, and 16 minutes were used to evaluate the performance of nutrient-amended (free ammonia and phosphorus) biofiltration for THM and DCAN precursor removal, as measured using formation potential (FP) tests. NOM surrogates – which include dissolved organic carbon (DOC), specific ultraviolet absorbance (SUVA254) and fluorescence-PARAFAC components – were measured weekly throughout the …


Geophysical Assessment Of Subsurface Soil Conditions Using Capacitively Coupled Resistivity, Folaseye Coker Aug 2018

Geophysical Assessment Of Subsurface Soil Conditions Using Capacitively Coupled Resistivity, Folaseye Coker

Graduate Theses and Dissertations

The purpose of this research is to explore the applicability of Capacitively-Coupled Resistivity (CCR) as an improvement on traditional drilling and sampling methods for subsurface soil investigations. The CCR method could be used to identify critical locations for drilling and sampling such as expansive clay layers and anomalies (sinkholes, unknown landfills, etc.) rather than uniformly sampling across a site. CCR surveys were performed at Alpena, Arkansas along a highway expansion project changing US 62 from a two lane to four lane highway, and at Alton, Illinois along the Mel Price Levee, a 5.2 mile levee along a portion of the …


Proposed Astm Standard For The Stokoe-Type Resonant Column Torsional Shear Device, Anh Tuan Tran Aug 2018

Proposed Astm Standard For The Stokoe-Type Resonant Column Torsional Shear Device, Anh Tuan Tran

Graduate Theses and Dissertations

Resonant Column Torsional Shear (RCTS) testing has become one of the most commonly used methods for determining laboratory soil stiffness and soil damping. The RCTS test has been accepted and is commonly utilized during the permitting of new nuclear facilities. However, there is still no available public standard for performing RCTS tests using the Stokoe-type device. Therefore, an ASTM standard for calibration and performance of RCTS tests using the Stokoe-type RCTS device is presented herein. Data collected using the Stokoe-type RCTS devices at the University of Arkansas (UofA) and at the Norwegian Geotechnical Institute (NGI) also aided in the development …


Liquefaction-Induced Dragload And/Or Downdrag On Deep Foundations Within The New Madrid Seismic Zone, Ishimwe Elvis May 2018

Liquefaction-Induced Dragload And/Or Downdrag On Deep Foundations Within The New Madrid Seismic Zone, Ishimwe Elvis

Graduate Theses and Dissertations

Deep foundation elements are typically used to transfer structural loads for multi-story buildings and large-span bridges to a competent soil layer when 1) the soil close to the ground surface has no sufficient bearing capacity, and when 2) liquefiable soils are encountered. The majority of the bridges constructed within seismic zones rely upon the stability of earthen embankments and deep foundation that are installed above or within liquefiable soil deposits. Despite large factor of safety values or different load and resistance factors being used to adequately design deep foundations within seismic areas, soil liquefaction may cause extensive damage to the …


An Evaluation Of Borehole Hydraulic Conductivity Equations And Field Determined Soil Water Characteristic Curves, Johnathan Dale Blanchard Dec 2017

An Evaluation Of Borehole Hydraulic Conductivity Equations And Field Determined Soil Water Characteristic Curves, Johnathan Dale Blanchard

Graduate Theses and Dissertations

The methods utilized to determine the hydraulic conductivity of compacted clay liners (CCLs) are of importance for safe guarding the environment from landfill leachate. Therefore, the methods utilized in the analysis of the Two Stage Borehole (TSB) test, as described in the ASTM D6391-11 (Method A, B, and C) standard, were evaluated. Data from hydraulic conductivity tests, as performed on three test pads, were utilized to review the ASTM D6391-11 equations. Additionally, two test pads were instrumented with volumetric water content and soil water matric potential sensors to facilitate the determination of field-obtained soil water characteristic curves (SWCCs) and hydraulic …


Evaluation Of Water Resources And Hydraulic Influences In The Restoration Of The Western Part Of The Mesopotamian Marshlands, Ali Kareem Al-Quraishi Dec 2017

Evaluation Of Water Resources And Hydraulic Influences In The Restoration Of The Western Part Of The Mesopotamian Marshlands, Ali Kareem Al-Quraishi

Graduate Theses and Dissertations

The purpose of this study is to assess the water resources and water conveyance system of the western part of the Mesopotamian marshes (Al-Hammar marsh) as well as develop a water conveyance system to distribute water throughout the western Al-Hammar marsh. These processes are significant to identify the current restoration problems and help to create restoration strategies for the marsh. Also, proper management strategy to the Al-Hammar marsh is necessary to preserve the marsh ecosystem, irrigate lands, and provide domestic necessities in the villages.

The overall project is divided into three main chapters which address the current ecological and hydrological …


Soil-Structure Interaction Effects On The Seismic Response Of Low-Rise Eccentrically Braced Frames, Luis Gerardo Buitrago Goyez Aug 2017

Soil-Structure Interaction Effects On The Seismic Response Of Low-Rise Eccentrically Braced Frames, Luis Gerardo Buitrago Goyez

Graduate Theses and Dissertations

The importance of soil-structure interaction (SSI) effects on the seismic response of

buildings has been long recognized and has been researched for over 40 years. However, SSI

analysis has only been applied in a few building projects because the fixed base condition is

considered to provide a conservative estimation for the response of buildings under seismic loads.

This assumption of a fixed base condition adopted by practitioners is not always conservative or

cost-effective, especially for rigid buildings over soft soils. Additionally, for the case of ductile

steel frames with eccentric configurations, the influence of SSI on their seismic performance has …


Laboratory Resistivity Measurements For Soil Characterization, Behdad Mofarraj Kouchaki Aug 2017

Laboratory Resistivity Measurements For Soil Characterization, Behdad Mofarraj Kouchaki

Graduate Theses and Dissertations

Field based electrical resistivity measurements, such as electrical resistivity tomography (ERT) and capacitively coupled resistivity (CCR), are geophysical methods that offer a non-destructive and rapid means to collect continuous data. As such, ERT and CCR are becoming increasingly popular tools for geotechnical engineers; however, it is challenging to derive geotechnical information such as soil type, density, and water content from the data. A laboratory geophysical investigation was carried out to gain a better understanding of the parameters that affect the electrical resistivity of soils and devise a relationship between resistivity and soil type or classification. In this study, a soil …