Physical Sciences and Mathematics Commons^™

High Resolution Mass Spectrometry As A Platform For The Analysis Of Polyoxometalates, Their Solution Phase Dynamics, And Their Biological Interactions., Daniel T. Favre

Doctoral Dissertations

Polyoxometalates (POMs) are a class of inorganic molecule of increasing interest to the inorganic, bioinorganic and catalytic communities among many others. While their prevalence in research has increased, tools and methodologies for the analysis of their fundamental characteristics still need further development. Decavanadate (V10) specifically has been postulated to have several unique properties that have not been confirmed independently. Mass spectrometry (MS) and its ability to determine the composition of solution phase species by both mass and charge is uniquely well suited to the analysis of POMs. In this work we utilized high-resolution mass spectrometry to characterize V10 in aqueous …

Development Of Novel Protein Digestion And Quantitation Methods For Mass Spectrometic Analysis, Yongling Ai

Dissertations

Proteins are the workhorses of biology, playing multifaceted roles in maintaining cellular function, signaling, and response to environmental cues. Understanding their abundance and dynamics is pivotal for unraveling the complexities of biological processes, which underpins the foundations of molecular and cellular biology. Accurate measurement of protein quantities provides insights into cellular homeostasis, facilitates the discovery of biomarkers, and sheds light on the molecular mechanisms of diseases, bridging the gap between the molecular intricacies of proteins and their functional consequences in health and disease. The evolution of protein quantitation methodologies, from classical colorimetric assays to sophisticated mass spectrometry-based approaches, has expanded …

Designing And Studying Redox-Active Molecules For Energy Storage And Desalination, Wenda Wu

All Graduate Theses and Dissertations, Fall 2023 to Present

Since the fast growth of the global population, energy scarcity has become a new threat to modern society. Those commonly seen resources like fossil, coal, and natural gas are nonrenewable energies, which cannot be replenished by human-scale time. In contrast, wind, solar, and hydropower are the three main renewable green energies under development with great efforts around the world. However, the intermittent character of these powers raises a new question: how to store them properly on large scales? By 2021, more than 90% of the electricity storage was taken by Lithium-ion batteries (LIBs). The usage of lithium brings concerns about …

A Computational Approach For Mapping Electrochemical Activity Of Multi-Principal Element Alloys, Jodie A. Yuwono, Xinyu Li, Tyler D. Dolezal, Adib J. Samin, Javen Qinfeng Shi, Zhipeng Li, Nick Birbilis

Faculty Publications

Multi principal element alloys (MPEAs) comprise an atypical class of metal alloys. MPEAs have been demonstrated to possess several exceptional properties, including, as most relevant to the present study a high corrosion resistance. In the context of MPEA design, the vast number of potential alloying elements and the staggering number of elemental combinations favours a computational alloy design approach. In order to computationally assess the prospective corrosion performance of MPEA, an approach was developed in this study. A density functional theory (DFT) – based Monte Carlo method was used for the development of MPEA ‘structure’; with the AlCrTiV alloy used …

Electrochemical Approaches To Life-Support Resources In Space Missions And Nuclear Technologies: Hydrogen Peroxide And Uranium Films, Armando Manuel Pena-Duarte

Open Access Theses & Dissertations

Space race has developed several technological advances that have achieved and continue to achieve the success of space missions in the aerospace timeline. Currently, the number of space technical and scientific innovations is still growing––demanding new materials and developments for extreme performing applications of fuel cells, batteries, supercapacitors, and systems of nuclear energy. Space missions require life-support solutions, auto-sustainable closed-loop living environments, cleaning and sanitizing solutions against pathogens, and safe nuclear-based resources of energy––with fissile materials with well-controlled dimensions within the core fuel elements. Likewise, to guarantee safety conditions, reduce costs, and facilitate operational logistics, space missions must reduce their …

Electrochemical Hydrogen Gas Production And Carbon Dioxide Sequestration Via In Situ Formation Of Nickel (Ii) Tris-(Pyridinethiolate) Derivatives, Dayalis S.V. Brown

Dissertations and Theses

In the research presented, we use electrochemical techniques, such as cyclic voltammetry and controlled potential electrolysis, to study in situ formation of hydrogen evolution catalysts which also reduce carbon dioxide. Using pyridinethiol-based ligands and a nickel (II) precursor, both homo- and heteroleptic complexes were investigated as catalysts to produce alternative fuels while mitigating greenhouse gas emissions. Existing synthetic procedures to obtain these Ni(II) catalysts lead to low yields of the complexes and difficulties in crystallizing samples for further analysis, limiting sample size and restricting the number of studies. While current research is heavily focused on photochemically-driven experiments, given that solar …

Band Alignments Of Metal/Oxides-Water Interfaces Using Ab Initio Molecular Dynamics, Yong-Bin Zhuang, Jun Cheng

Journal of Electrochemistry

Band alignments of electrode-water interfaces are of crucial importance for understanding electrochemical interfaces. In the scenario of electrocatalysis, applied potentials are equivalent to the Fermi levels of metals in the electrochemical cells; in the scenario of photo(electro)catalysis, semiconducting oxides under illumination have chemical reactivities toward redox reactions if the redox potentials of the reactions straddle the conduction band minimums (CBMs) or valence band maximums (VBMs) of the oxides. Computational band alignments allow us to obtain the Fermi level of metals, as well as the CBM and VBM of semiconducting oxides with respect to reference electrodes. In this tutorial, we describe …

Electrochemical Scanning Tunneling Microscopy: Taking The Initial Stage Of Cu Electrodeposition On Au(111) As An Example, Zhuo Tan, Kai-Xuan Li, Bing-Wei Mao, Jia-Wei Yan

Journal of Electrochemistry

Electrochemical scanning tunneling microscopy (ECSTM) plays an important role in the field of electrochemistry, which can obtain potential-dependent structural information of electrode surface with high spatial resolution and observe some reaction processes in electrolyte solutions, and provide a powerful way to understand the interfacial structure and electrode processes from the perspective of high spatial resolution. In this article, the study of electrodeposition of Cu on Au (111) by ECSTM is taken as an example to introduce the experimental methods required for ECSTM and share our experience with other electrochemical groups. Firstly, the working principle of STM is introduced so that …

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Carbon Dioxide Reduction On Large Area Liquid Metal Gallium-Indium Electrocatalysts, Thomas Hollis

Chemistry & Biochemistry Undergraduate Honors Theses

Carbon dioxide (CO₂) is widely known as a greenhouse gas that contributes to global warming due to the burning of fossil fuels. The carbon dioxide reduction reaction (CO₂RR) is widely studied to reutilize CO₂ to useful products, including methane, ethane, and carbon monoxide. This project studies the use of liquid metal gallium-indium as an electrocatalyst to perform CO₂ reduction to carbon monoxide (CO) or possibly solid carbon in various solutions. Gallium-indium is characterized and studied through its “wetting” properties and adhesion to substrate foil through the measurement of contact angles inside solution. These liquid …

Use Of Electrochemical Techniques And Statistical Analysis To Investigate The Pitting Probability Of Copper, Sina Matin

Electronic Thesis and Dissertation Repository

The development of a safe permanent disposal plan is essential for the long-term disposal of used fuel bundles. Nuclear Waste Management Organization (NWMO) has been investigating the deep geologic disposal of nuclear waste which offers the optimum passive safety system with a negligible probability of release of radionuclides into the environment.

The proposed used fuel containers (UFC) for the permanent disposal of high-level nuclear waste in Canada is comprised of a carbon steel vessel coated with a 3 mm corrosion-resistant copper layer deposited using a combination of electrodeposition and cold spray deposition. Although copper is often considered to be thermodynamically …

Characterization Of Deposited Copper Oxide Films On Copper Substrates, Millicent Castillo

Electronic Thesis and Dissertation Repository

The deposition of copper oxide films on copper substrates was investigated by the electrochemical, thermal, and hydrothermal oxidation of copper. The formed oxides were characterized using various surface analytical techniques to determine the film’s morphology, composition, and thickness. The results show that by growing oxides electrochemically, a duplex layer composing of CuO and Cu₂O film was formed on the copper surface, having characteristics of being porous and possessing needle-like structures. An oxide film composed of CuO and Cu₂O, which shows minimal porosity and possess mixtures of crystalline and non-crystalline structures, is formed on the copper surface …

Intergranular And Pitting Corrosion Mechanisms Of Sensitized Aluminum Alloy Aa5083, Clayton Egleston

Williams Honors College, Honors Research Projects

The motivation and objectives of this project is to examine the mechanisms of intergranular corrosion (IGC) and pitting corrosion of sensitized AA5083. In this regard, different characterization techniques were used, including optical analysis of microstructure, cyclic potentiodynamic polarization with Tafel fitting, electrochemical impedance spectroscopy with electrical equivalent circuit (EEC) fitting, and potentiostatic current transient monitoring. The transition from IGC to pitting corrosion occurs when the grain boundaries become saturated with the β-phase (Mg₂Al₃). It was found that AA5083 becomes more vulnerable to pitting corrosion as the degree of sensitization increases.

Study On New Strategy Toward Gold(I/Iii) Redox Catalysis, Shuyao Zhang

USF Tampa Graduate Theses and Dissertations

This dissertation mainly contains three parts: 1) the study of ligand assisted gold oxidative addition toward aryl iodide to achieve the alkene difunctionalization. 2) The selective arylation reaction via electrochemical anode oxidation promoted gold redox chemistry. 3) The π acid reactivity of gold redox chemistry under electrochemistry conditions.

In the first part, the gold-catalyzed intermolecular oxyarylation of alkene is reported. This work employed the oxidative addition of aryl iodide to Me-DalphosAu+ for the formation of Au(III)-Ar intermediate. The better binding ability of alkene over O nucleophiles ensured the success of intermolecular oxyarylation, giving desired products with broad substrate scope and …

Contact Angle & Electrochemical Measurements Of Metallic Atmospheric Corrosion On Copper And Carbon Steel, Jacob J.M. Bunting, Jiju M. Joseph, Heng-Yong Nie, Samantha M. Gateman

Undergraduate Student Research Internships Conference

Understanding atmospheric corrosion has been incredibly challenging due to the complex interplay between surface microstructures, environmental variables, and electrochemical processes. The methodology presented is being developed to apply to atmospheric corrosion models of metals and other advanced materials by observing the change in contact angle in situ as a function of corrosion parameters. Performed contact angle measurements on two industrially relevant metals (copper and carbon steel) over a 1 min to 30-day time span to track the change in wettability due to the formation of an air-formed oxide layer (aged) as a function of surface roughness.

Simple And Fast Fabrication Methodology For Platinum And Carbon Ultramicroelectrodes (Ume) In Scanning Electrochemical Microscopy (Secm), Emma Mae Lord, Jiju Joseph, Samantha M. Gateman, Zhifeng Ding

Undergraduate Student Research Internships Conference

Scanning electrochemical microscopy (SECM) is a highly versatile method for measuring and imaging a wide range of systems. When paired with an intricately made ultramicroelectrode (UME) probe, SECM becomes an even more powerful tool for imaging microscale features in a system. However, purchasing these UME’s comes at a high cost with less ability for modification. Having high quality UME’s expands the ability of SECM and enables precise measuring and imaging in a wide range of applications such as solar cells in Dr. Ding’s lab, and corroding metals in Dr. Gateman’s lab. To combat this issue of high cost and set …

Dissolution And Electrochemical Recovery Of Uo2, Uo3, And U3o8 In Ionic Liquids, Katherine Iolani Thornock Luebke

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research explores a novel method of increasing the solubility of uranium oxides and other actinide oxides in room temperature ionic liquids (IL) using direct dissolution. The goal is to further expand our knowledge of actinide dissolution and possible nuclear fuel cycle material applications using ionic liquids. The novelty of the methods is focused on the use of oxidizing gas generated using air passed through an ozone generator. While examples of dissolution exist in IL using acidic functionalized ionic liquids, the solubility of all possible oxide species was not demonstrated. Also, the addition of aqueous acid to IL containing actinide …

Introduction Of Development And Application Technology Of Organic Additives For Acid Copper Electroplating, Hao-Bin Zou, Chao-Li Tan, Wei Xiong, Dao-Lin Xi, Bin-Yun Liu

Journal of Electrochemistry

Acid copper electroplating is one of the key technologies in buildup multilayer PCB (BUM-PCB) manufacture process and the most important technique to achieve electrical interconnection between any layer and high-density interconnection in a substrate. This article introduces the research focus of organic additives used in acid copper electroplating, and developing different kinds of micro-via filling copper electroplating technique applied in various scenarios, and some other technical problems from applications. First of all, according to the chronopotentiometric (CP) experiment results, the levelers with different polymeric molecular structures exhibited various responses of cupric deposition potential along with their increased concentrations, which is …

Development Of Novel Mass Spectrometric Methods For Reaction Screening, Oligosaccharide Detection, And Nitrosamine Quantitation, Qi Wang

Dissertations

Benefitting from its high detection sensitivity and specificity, mass spectrometry (MS) has become a powerful technique in academia and industry. The aim of this dissertation study is to develop new mass spectrometric methods for organic reaction screening, detection of oligosaccharide/glycan in complex matrices, and nitrosamine absolute quantitation.

First, an electrochemistry/mass spectrometry (EC/MS) platform is built to generate an N-cyclopropylaniline radical cation electrochemically and to monitor its reactivity toward alkenes, which leads to the discovery of a new redox neutral reaction of intermolecular [3 + 2] annulation of N-cyclopropylanilines and alkenes. Net redox neutral electrosynthesis is quite rare in synthetic organic …

Nitro-Aromatic Polymers For Conversion-Style Battery Cathodic Materials, Brady P. Samuelson

Honors Thesis

The development of organic electrode materials in rechargeable batteries has seen a resurgence in recent decades. This spike in interest is mostly due to the increased investments in renewable energy sources, grid-scale energy storage, and the rapid transition to electric vehicles. Current lithium battery cathode materials typically use some form of lithium metal oxide (specific capacity: 272 mAh g^-1 which has problems with limited capacity, thermal runaway, and an unreliable supply chain. Our research group’s solution involves investigating new lightweight, organic redox groups combined with a conductive polymer backbone to serve as a possible replacement for the cathode in …

Investigating Ionic Current Rectification As A Means Of Controllable Drug Delivery Using Silica Nanoparticles And Nano Porous Membranes, Katie L. Nolan

Honors College Theses

This project investigates a novel ionic current rectification (ICR) phenomenon created by the opening and closing of nanopores by charged silica nanoparticles (SNPs) under electrophoretic flow. This voltage-controlled opening and closing of the pores can be exploited to allow delivery of nicotine through the pores at programmable intervals. The ICR phenomenon was thoroughly investigated by varying pH, buffer concentration, SNP concentration, and applied voltage range. The mechanism was also verified by testing with a 2-, 3-, and 5-electrode system. Potential cake layer formation was demonstrated in a longer ICR test, and the implications of this on the drug delivery mechanism …

Efficient Capture Of Co2 And Its Selective Reduction To Formic Acid Using Tin-Based Nanomaterials, Emmanuel Oluwaseun Abdul

Dissertations and Theses

CO₂ emissions from the combustion of fossil fuels and other anthropogenic sources have become the main contributing factors to global warming. Chemical methods of absorbing/capturing CO₂ from combustion flue gases have made it a sought-after approach in engineering emission solutions because of its simplistic and convenient operation and high absorption efficiency. The conversion of CO₂ into renewable fuels and high energy density chemicals by clean and economic processes has drawn scientists' attention over the decades. The electrocatalytic conversion of CO₂ using Sn-based materials has been demonstrated to be a promising method for producing formate, an important …

A Biomimetic Model For Oxidative Metabolism Of Thiopurine Drugs, Oluyemi Oludare Alo

Dissertations and Theses

Type B hepatotoxicity has been reported for thiopurines, and this has limited their clinical uses. Although a lot of research has been done on thiopurines, the precise mechanism of their hepatotoxicity is still unclear. The results of the in vitro and in vivo experiments aimed at assessing the products of their CYP450-mediated bioactivation have been contradictory. Although it has been theorized that the hepatic toxicity of this class of drug is caused by their bioactivation to electrophilic reactive metabolite (RM) and concomitant protein binding to form immunogenic adducts, resulting in direct cellular dysfunction or an immune response via the formation …

Electrochemistry Of Bubbles: Developing New Sensors, Promoting Gas Evolution Reactions, And Extraction Of Rare Earth Elements, Ruchiranga R. Ranaweera

Wayne State University Dissertations

This dissertation presents new analytical, electrocatalysis, and separation strategies that utilize bubble behaviors in different electrochemical systems. The first part of this dissertation focuses on the method development for PFAS preconcentration and detection. First, we present the bubble-nucleation-based electrochemical method for the selective and sensitive detection of surfactants. Our method utilizes the high surface activity of surfactant analytes to affect the electrochemical bubble nucleation and then transduces the change in nucleation condition to an electrochemical signal for determining the surfactant concentration. Using this method, we demonstrate the quantitation of perfluorinated surfactants in water, a group of emerging environmental contaminants, with …

Electrochemical And Mass Spectrometry Methods For Identification Of Gunshot Residues (Gsr) In Forensic Investigations, Kourtney A. Dalzell

Graduate Theses, Dissertations, and Problem Reports

Gun violence continues to be one of most significant challenges straining the USA society causing thousands of human lives lost every year. In 2020 alone, firearm-related incidents including homicide, accidents, and suicides, reached a staggering number of over 43,000.^1,2 With the increase in these types of incidents, several service areas in crime laboratories are heavily impacted by the number of cases run on a yearly basis. These include firearm examinations, gunshot residue (GSR) analysis, bullet hole identification, and shooting distance determination, which are crucial to support a criminal investigation and, overall, the justice system in our country. These areas …

Analysis Of Forensically Relevant Evidence Using Electrochemistry, Spectroscopy, And Mass Spectrometry Tools, Colby Edward Ott

Graduate Theses, Dissertations, and Problem Reports

Forensic science relies on the use of multiple techniques in the assessment of evidence to increase the accuracy and reliability of the results. However, with the rapidly changing drug landscape due to the introduction of novel psychoactive substances, many traditional screening methods are no longer sensitive or selective enough for use. Additionally, many screening methods such as chemical color tests are prone to false positive and negative results and are subjective. Therefore, the goal of this dissertation was to develop a novel analytical scheme that can provide a more efficient, rapid, and sensitive method that will facilitate adoption in the …

Electrodeless Electrochemistry Enabled By Nonthermal Plasma, Harold Oldham

McKelvey School of Engineering Theses & Dissertations

The increasing availability and decreasing cost of electricity generated by renewable resources have motivated research into electrified chemical processing, whereby electrical energy is used to drive chemical transformations. Electricity-intensive processing techniques such as electrochemistry using solid electrodes has attracted attention in this context for the synthesis of organic compounds, such as high-value pharmaceuticals and renewable chemical production. Selective chemical transformations are achieved in conventional aqueous electrochemical systems by using external circuitry to bias solid electrodes, allowing for the preferential transfer of electrons between the electrode-liquid interface. Despite having the ability to promote controlled electrochemical reactions, configurations using solid electrodes are …

Electrochemical Studies Of Organic And Organometallic Compounds In The Pursuit Of Electrocatalytic Carbon Dioxide Reduction, Joshua J. Ludtke

College of Science and Health Theses and Dissertations

Carbon dioxide is the main contributor to the greenhouse effect in the world today; developing renewable energy sources and addressing anthropogenic CO₂ release into the atmosphere are two key ways of addressing its increasing impact. Electrocatalytic reduction to products like methanol or carbon monoxide is one useful path to address the rapid increase of carbon dioxide, and the fac-M(bpy-R)(CO)₃X family of complexes (M = Mn or Re; bpy-R = substituted 2,2’-bipyridine; X = Cl, Br, etc.) is one class of effective CO₂ reduction catalysts. Although the capability of the rhenium complex Re(PyBimH)(CO)₃Cl (PyBimH …

Electrochemical Studies Of Poly 3-(4-Methoxyphenyl)[5] Ferrocenophane-1,5-Dimethylene And Copolymers With Styrene And N-Phenylmaleimide, Niyati Arora

Electronic Theses & Dissertations

Ferrocene is an organometallic compound in which an iron atom is sandwiched between two cyclopentadienyl rings. Ferrocene containing polymers receive a considerable amount of research because of their known chemistry, stable redox reactions and useful electrical systems. Noteworthy are their uses as electrode coatings, electro-catalysts and as an anode in battery applications. In this research, the synthesis and polymerization of a ferrocenophane diene is reported. Using a Wittig reaction 3-(4-methoxyphenyl)[5]ferrocenophane-1,5-dimethylene was synthesized from 3-(4-methoxyphenyl)[5]ferrocenophane-1,5-dione. The homopolymer and copolymers with styrene and N-phenylmaleimide were synthesized via free radical polymerization from 3-(4-methoxyphenyl)[5]ferrocenophane-1,5-dimethylene using AIBN as the initiator. These polymers were characterized using …