Physical Sciences and Mathematics Commons^™

From Waste To Energy: The Electrochemical Reduction Of Co2 Using Recycled Nanostructured Catalysts, Ibrahim Badawy

Theses and Dissertations

The reduction of carbon dioxide (CO₂RR) using electrochemistry is a promising solution for the burgeoning global energy crisis. The overall vision of its implementation relies on renewable energy sources to power the reaction creating carbon neutral products and effectively closing the carbon cycle. Research in this field has come a long way since its inception in the mid-1900s. However, there remain significant hurdles and important considerations to overcome in order to reach full commercialization. Most electrocatalysts tested for CO₂RR have been designed solely for maximum performance while ignoring the environmental consequences if such a material were …

Carbon Dioxide Reduction On Large Area Liquid Metal Gallium-Indium Electrocatalysts, Thomas Hollis

Chemistry & Biochemistry Undergraduate Honors Theses

Carbon dioxide (CO₂) is widely known as a greenhouse gas that contributes to global warming due to the burning of fossil fuels. The carbon dioxide reduction reaction (CO₂RR) is widely studied to reutilize CO₂ to useful products, including methane, ethane, and carbon monoxide. This project studies the use of liquid metal gallium-indium as an electrocatalyst to perform CO₂ reduction to carbon monoxide (CO) or possibly solid carbon in various solutions. Gallium-indium is characterized and studied through its “wetting” properties and adhesion to substrate foil through the measurement of contact angles inside solution. These liquid …

Surface Modification Of Carbon-Based Electrodes For Electrochemical Conversion Processes: Oxygen Reduction Reaction And Bicarbonate Conversion, Udari Shyamika Kodithuwakku Arachchige

Theses and Dissertations--Chemistry

Oxygen reduction reaction (ORR) and conversion of bicarbonate into value-added chemicals are two significant electrochemical processes for energy storage and conversion. ORR is an important electrochemical reaction in fuel cells and metal-air batteries that provide power conversion and storage capacity, respectively, for portable electronics, and electric vehicles. However, the performance of catalysts (e.g., platinum-based) is critically limited by slow kinetics, inefficient four-electron pathway, and surface deactivation. This limited performance of platinum-based catalysts, the scarcity of platinum, and vulnerable supply chains for critical minerals require the development of alternative electrocatalysts now more than ever. Carbon-based materials possess several key properties that …

Molecularly Inspired Organic Macrocycles Catalyzed Water Splitting Reaction For Sustainable Fuel Production, Yulu Ge

Open Access Theses & Dissertations

Hydrogen fuel generation through electrochemical water splitting is considered as an advanced energy conversion technology driven by sustainable energy. High activity and cost effective electrocatalysts that are able to drive down the energy cost needed for both two half reactions, namely, hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are required to fulfill the energy transfer process. Exploring new electrocatalysts with enhanced OER and HER activity and stability is crucial for renewable energy applications. Porphyrin and macrocycle derivatives are versatile and can electrochemically catalyze water splitting efficiently. In our work, we use porphyrin as platform for both HER and …

Structural, Charge Transport, Gas Sensing, Magnetic, Pseudocapacitive, And Electrocatalytic Properties Of Perovskite Oxides., Surendra Bahadur Karki

Electronic Theses and Dissertations

Perovskites are functional materials with the general formula ABO₃ (A = alkali, alkaline earth or lanthanoid cations and B = transition metal or main group cations). These materials are marked by a variety of crystal structures and interesting properties such as colossal magnetoresistance, ferroelectricity, multiferroicity, superconductivity, pseudocapacitance, gas sensing, charge transport, and electrocatalytic properties. The formula of perovskite can be written as AA’BB’O₆, when there is ordering between two cations over A and B-sites. Such compounds are called double perovskite oxides. Some amount of oxygen could be lost from crystal structure without decomposition of the phase. Such …

Rational Design Of Multifunctional Nanocatalysts For Environmental Remediation And Energy Conversion Technologies, Md Ariful Ahsan

Open Access Theses & Dissertations

The discovery of efficient and sustainable carbon-based nanotechnologies to solve both the scarcity of drinking water and global energy crisis has become a paramount task in the last decades. Owed to the fast population growth and industrialization of the modern society, access to potable water and clean energy technologies is becoming very hard around the globe. Water pollutants have become a serious threat to the environment and ecology because of their toxic nature. Parallelly, the current hydrocarbon-based fuel industries are generating high levels of contamination across the planet, making imperative the development of cleaner energy technologies. In this regard, the …

Facile Nitrogen-Doping Of Screen-Printed Carbon Electrodes For Detection Of Hydrogen Peroxide, Emmanuel Nkyaagye

Electronic Theses and Dissertations

Screen-printed carbon electrodes (SPCEs) have garnered much attention as sensors due to their simplicity and relatively low cost. However, to impart necessary selectivity and sensitivity for specific applications, modification of the SPCE surface, which can involve time-consuming procedures or costly equipment/materials, is typically required. Here, a simple nitrogen-doping process based on NH₄OH was used to modify SPCEs prepared from commercially available ink for electrochemical detection of H₂O₂, a common target for biosensing strategies and indicator of cell stress. XPS studies showed that NH₄OH treatment of SPCEs led to a nearly 5-fold increase …

Electrochemical Studies Of Organic And Organometallic Compounds In The Pursuit Of Electrocatalytic Carbon Dioxide Reduction, Joshua J. Ludtke

College of Science and Health Theses and Dissertations

Carbon dioxide is the main contributor to the greenhouse effect in the world today; developing renewable energy sources and addressing anthropogenic CO₂ release into the atmosphere are two key ways of addressing its increasing impact. Electrocatalytic reduction to products like methanol or carbon monoxide is one useful path to address the rapid increase of carbon dioxide, and the fac-M(bpy-R)(CO)₃X family of complexes (M = Mn or Re; bpy-R = substituted 2,2’-bipyridine; X = Cl, Br, etc.) is one class of effective CO₂ reduction catalysts. Although the capability of the rhenium complex Re(PyBimH)(CO)₃Cl (PyBimH …

Synthesis, Characterization, And Catalytic Activity Of Functionalized Metal Bis(Thiosemicarbazones)., Caleb Aaron Calvary

Electronic Theses and Dissertations

Bis-(thiosemicarbazones) are a class of ligands that have found a wide range of uses from electrocatalysts to medicinal and diagnostic reagents. These ligands contain a diimine backbone, N₂S₂ chelating core, and pendent amines. In order to further explore this class of ligands, the previously underreported transamination reaction, which exchanges one pendent amine group for another, was utilized to create several derivatives using aliphatic and aromatic amines. The transamination reaction is appealing alternative to making the desired thiosemicarbazide. Further appeals come from the fact that it is a one-pot reaction that gives highly pure products in good yields. …

Advancements Toward Sustainable Solar Fuel Production Utilizing Reductive Homogeneous Electro- And Photocatalysis, Hunter Pratt Shirley

Electronic Theses and Dissertations

Molecular CO2 and H+ reductive catalysts, whether they be electro- or photocatalytic, have been shown to be possible routes of harnessing solar energy in a clean, renewable manner. There are few electrocatalysts operating at reasonable overpotentials to prove useful in artificial photosynthetic systems, and there are a number of environmental factors within these systems that have yet to be evaluated. Photo-driven catalysis is rare, difficult to control, and rarely provides high-value CO2 reduction products. I report herein an exceptionally low overpotential H+ reduction catalyst, a method of modulating electrocatalysts in-situ to improve performance, a first-of-its-kind mononuclear proton reduction photocatalyst, a …

Immobilization Of Electrocatalytically Active Gold Nanoparticles On Nitrogen-Doped Carbon Fiber Electrodes, Daniel Mawudoku

Electronic Theses and Dissertations

Studies of single, isolated nanoparticles provide better understanding of the structure-function relationship of nanoparticles since they avoid complications like interparticle distance and nanoparticle loading that are typically associated with collections of nanoparticles distributed on electrode supports. However, interpretation of results obtained from single nanoparticle immobilization studies can be difficult to interpret since the underlying nanoelectrode platform can contribute to the measured current, or the immobilization technique can adversely affect electron transfer. Here, we immobilized ligand-free gold nanoparticles on relatively electrocatalytically inert nitrogen-doped carbon ultramicroelectrodes that were prepared via a soft nitriding method. Sizes of the particles were estimated by a …

Deposition Of Platinum Particles On Surface-Modified Carbon Ultramicroelectrodes, Caitlin Millsaps

Undergraduate Honors Theses

Nanoparticles are used as electrocatalysts due to their large surface area-to-volume ratios. Most studies of nanoparticle electrocatalysis are performed on collections of particles on a support, which represent ensemble average behavior influenced by spatial distribution of the nanoparticles. Therefore, recent emphasis has been placed on analyzing electrocatalytic behavior of single particles. The focus here is to develop carbon ultramicro- and nanoelectrode platforms for studying the electrocatalytic properties of single metal nanoparticles. Ultramicroelectrodes were prepared using chemical vapor deposition of carbon in pulled quartz capillaries. Electrode diameters were determined by cyclic voltammetry. Electrodes were modified using a soft nitriding technique to …

Carbon Quantum Dots: Bridging The Gap Between Chemical Structure And Material Properties, Timothy J. Pillar-Little Jr.

Theses and Dissertations--Chemistry

Carbon quantum dots (CQDs) are the latest generation of carbon nanomaterials in applications where fullerenes, carbon nanotubes, and graphene are abundantly used. With several attractive properties such as tunable optical property, edge-functionalization, and defect-rich chemical structure, CQDs have the potential to revolutionize optoelectronics, electro- and photocatalysis, and biomedical applications. Chemical modifications through the addition of heteroatoms, chemical reduction, and surface passivation are found to alter the band gap, spectral position, and emission pathways of CQDs. Despite extensive studies, fundamental understanding of structure-property relationship remains unclear due to the inhomogeneity in chemical structure and a complex emission mechanism for CQDs.

This …

Multiscale Modeling Approach To Understand Active Sites In Non-Conventional Catalyst Layers For Fuel Cell Applications, Diana Constanza Orozco Gallo

Doctoral Dissertations

Fuel cells development required stable, active and more abundant catalytic materials. Oxygen reduction reaction (ORR) is the key process to enhance better activity and reduce the fabrication costs. Pt-based has proven to be the best catalyst for ORR and greater efforts has been made in terms of reducing the Pt content in the electrodes, reduce electrode thickness and enhance better catalytic activities. To overcome many of the challenges present, the catalyst layer studies are the great importance in the fuel cell community. Understanding catalyst layer with new catalytic materials, and configurations requires the development of methodological approach to relate structure, …

Metal-Organic Frameworks And Mof-Derived Carbon Materials For Fuel Cell Applications, Kia Williams

USF Tampa Graduate Theses and Dissertations

Rapid industrial globalization and technological development and energy consumption across the globe has significantly increased in response to mounting energy needs. The necessity for alternative and sustainable energy conversion devices has become apparent with the growth of energy utilization. In recent years, many research efforts have been made in the development of low-cost, efficient, environmentally friendly energy conversion devices. One type of energy conversion device, polymer electrolyte membrane fuel cells (PEMFCs), uses hydrogen oxidation at the anode and oxygen reduction at the cathode, with a solid-state proton conducting membrane between to generate energy with water as a by-product. PEMFCs use …

Homogeneous Ligand-Centered Hydrogen Evolution And Hydrogen Oxidation : Exploiting Redox Non-Innocence To Drive Catalysis., Andrew Z. Haddad

Electronic Theses and Dissertations

Hydrogen is a promising carbon-free fuel / energy carrier and is an essential building block for many industrial and agricultural processes. Rising energy demands have ignited interest in the development of carbon-free and carbon neutral energy sources. In this context, hydrogen is an attractive candidate—being energy-dense, carbon-free—and easily accessible through a two-electron reduction of water. Accordingly, many electrochemical homogeneous catalyst systems have been studied, with a focus on understanding the mechanism of hydrogen evolution proceeding through metal-hydride intermediates. However, there has been a renaissance in hydrogen evolution reaction (HER) catalyst design, with many groups implicating ligand redox non-innocence as a …

Electrochemical Nanoprobes For Electron Transfer Kinetics And Electrocatalysis Study, Yun Yu

Dissertations, Theses, and Capstone Projects

The studies of electrochemical processes on the nanoscale have led to a significant progress in understanding of electrochemical mechanisms and characterization of nanomaterials in the fields of energy, catalysis, and biological research. Electrochemical experiments at nanoscale require the fabrication and characterization of nanometer-sized electrochemical probes. The main advantages of the nanoprobes include very fast mass-transfer rate, high signal-to-noise ratio and extremely fine spatial resolution of electrochemical imaging. In the course of my Ph.D. research, different types of electrochemical probes were developed for measuring electron-transfer kinetics, probing single catalytic nanoparticles and sampling ultra-small volume of liquids.

We developed methodologies to fabricate …

Robust Nickel Catalysts Supported By Biaryl-Bridged Pyridyl-N-Heterocyclic Carbenes For Carbon Dioxide Reduction To Value-Added Products, Hunter Allen Dulaney

Electronic Theses and Dissertations

Carbon dioxide is a greenhouse gas, but also represents a readily accessible C1 feedstock for conversion to solar fuels and value-added chemicals. However, CO2 is relatively inert and very negative voltages or strong chemical reductants are comfor its conversion. An additional challenge lies in achieving these reactions in water where aqueous protons are utilized selectively for CO2 reduction rather than hydrogen generation. Our strategy for CO2 reduction involves the design of new homogeneous catalysts with tunable geometries and polyaromatic frameworks with increased delocalization to lower overpotentials for catalysis. We report a family of biaryl-bridged pyridyl-N-heterocyclic carbene-based ligands and their corresponding …

Synthesis Of Palladium And Palladium-Copper Nanostructures As Electrocatalysts, Haibin Wu

Graduate Theses and Dissertations

Pd and its alloys are alternatives of Pt as promising catalysts and electrocatalysts for many reactions. Size controlled synthesis of nanoparticles remains a major research subject, since smaller size particles show better catalytic performance. In this work, we developed a modified chemical wet method to prepare Pd and Pd-Cu nanostructures with uniform small size. Different sizes and shapes of Pd nanostructures were successfully synthesized by using the two reducing agents (i.e., L-ascorbyl-6-palmitate or phenylphosphinic acid). The reducing agents play a role to control the final morphologies and sizes of particles. The use of L-ascorbyl-6-palmitate favors to form irregular branch shapes …

Investigation Of New Ligand Architechtures Towards Proton And Water Reduction Catalysis By Cobalt Complexes, Debashis Basu

Wayne State University Dissertations

We designed several redox-active ligand architectures to optimize and understand the redox, electronic, and catalytic properties of their respective cobalt complexes. Ligand design was varied from pentadentate donor phenolate to tetradentate acceptor oxime in order to reduce the overpotential of hydrogen generation in organic solvents. We altered the substitution, axial ligands and axial ligand substitutions to vary electronic and catalytic properties for such tetra- or pentadentate ligand systems. Knowledge of the nature of the active species for catalysis enabled us to design the pentadentate oxime ligand which exhibited rich reaction chemistry along with suitable catalytic property in organic solvent. Presence …

Model Pt- And Pd-Based Electrocatalysts For Low Temperature Fuel Cells Applications, Selasi Ofoe Blavo

USF Tampa Graduate Theses and Dissertations

In the search for alternative energy technologies, low temperature fuel cells continue to feature as technologies with the most promise for mass commercialization. Among the low temperature fuel cells, alkaline and proton exchange membrane fuel cells are the most popular. Alkaline fuel cells have typically been used for water generation as well as auxiliary power for space shuttles. Their bulkiness however makes them undesirable for other applications, especially in automobiles, where there is a great demand for alternative technologies to internal combustion engines. Proton exchange membrane fuel cells on the other hand possess numerous qualities including their compact size, high …

Synthesis Of Palladium-Based Electrocatalysis—From Pure Metal To Bimetallic Nanoparticles, Haijun Gao

Masters Theses

This thesis focuses on synthesis and characterization of palladium-based nanoparticles. Background information of the research in this thesis is provided in Chapter 1. Preparation and characterization of pure palladium nanoparticles are presented in Chapter 2. A fast and convenient method to prepare ultra small Pd nanoparticles via Pluronic P123 reduction is discussed in detail. Impregnation method and poly method are also studied in this chapter. Chapter 3 reports the studies of these methods to prepare ultra small bimetallic (bimetallic means a mixture of two metals) palladium-based nanoparticles. Oleylamine-mediated method used Pd nanoparticles prepared via P123 reduction as precursor. Ultra small …

New Generation Of Electrochemical Sensors For Nitric Oxide;Ruthenium/Carbon-Based Nanostructures And Colloids As Electrocatalytic Platforms, W. Pubudu M. Peiris

ETD Archive

Nitric oxide (NO) is an important intercellular messenger that acts in many tissues to regulate a diverse range of physiological and pathological processes. The physiologically implications of NO function are far from being completely understood. The multifaceted reactivity of NO prompted the need for accurate determination of the concentration of this molecule. However, it is difficult to detect nitric oxide, particularly in biological media and near live cells due to its short half-life, a result of its reactivity and the low levels of NO produced in vivo. As a result, the accurate and reliable detection of NO under varying experimental …

Nitric Oxide Synthase In Confined Environments;Detection And Quantification Of Nitric Oxide Released From Cells And Modified Liposomes Using A Sensitive Metal Catalyst-Pedot Modified Carbon Fiber Electrode, P. A. Reshani H. Perera

ETD Archive

Nitric oxide (NO) is a freely diffusible, gaseous free radical, associated with many physiological and pathological processes that include neuronal signaling, immune response, and inflammatory response. NO is produced from L-arginine in an NADPH-dependent reaction catalyzed by a family of nitric oxide synthase (NOS) enzymes. A deficiency in NO plays a role in hypertension, hyperglycaemia, and arteriosclerosis, among other pathological states. Conversely, increased NO levels contribute to arthritis, septic shock, and hypotention. Therefore, measuring and quantifying NO production in biological systems and matrices may be vital in elucidating physiological and pathological processes. The goal of this work is to develop …