Physical Sciences and Mathematics Commons^™

Air-Processed Polymer Photovoltaics: Advanced Morphological Characterization And Synthesis Of New Materials For Increased Light Absorption, Levi Moore

Dissertations

Organic photovoltaics (OPVs) have undergone intense development in recent years due to their potential to produce inexpensive, flexible, lightweight, and portable solar cells utilizing organic photoactive materials. Polymer-based OPVs have recently surpassed the 10 % in laboratory-scale devices, but require strict processing conditions in inert environments. Materials and processing methods that are workable in air are therefore desired. In addition to the light-absorbing and charge transport properties of the active layer materials, the morphology, crystallinity and orientation of the components of the phase-separated blend are paramount in determining OPV device performance This dissertation explores the processing of the model polymer …

Barrier Properties Of Polymer Nanocomposites With Graphene Oxide And Its Derivatives: Mechanism And Applications In Anticorrosive Coatings, Yidan Guan

Dissertations

Metallic devices made from steel or aluminum are subjected to deterioration by environmental contaminants over time. As one of the corrosion control methods, organic coatings show many advantages due to their low cost, versatility, decoration aesthetics and effective protections. Corrosion protection theories and failure modes of organic coatings are still not fully understood due to complicated interactions in the coating-metal-environment system, however, it is widely agreed that the barrier nature of polymeric materials towards aggressive species, such as oxygen, water, electrolyte, plays a key role. Improved barrier property of polymer nanocomposites (PNCs) with two-dimensional (2D) carbon filler, graphene and graphene …

Electrophilic Cleavage And Functionalization Of Polyisobutylenes Bearing Unsaturations In The Backbone And Synthesis Of Polymers For This Process, Christopher Campbell

Dissertations

In the first project, we demonstrated a new reaction, which is a subset of the Friedel‑Crafts alkylation reaction, in which the alkylating carbocation undergoes a cleavage reaction prior to reaction with the aromatic substrate. This reaction was discovered by the observation that when a PIB containing a large amount of coupled fraction was subjected to a mixture of protic and Lewis acids (HCl/TiCl₄) in the presence of an alkoxybenzene compound, the coupled fraction was quantitatively converted to its constituent monofunctional chains, which became functionalized by the alkoxybenzene.

In the second project, a commercial polymer, poly(isobutylene-co-isoprene) (butyl …

Synthesis And Catalytic Evaluation Of Novel C-Alpha-Methyl-Beta-Proline Analogues, And Concise Synthetic Approach To Nh-Fmoc-S-Trityl-C-Alpha-Methyl Cysteine, Hari Kiran Kotapati

Dissertations

In the field of chemistry there is a growing demand for small molecule organocatalysts such as amino acids, more specifically proline and its analogues, which could catalyze various key chemical reactions in the synthesis of several biologically important molecules. Even though natural proline is reported to catalyze various chemical reactions, its use as organocatalyst is limited mainly due to the solubility issues in the reaction media and high catalyst loadings, which is not very ideal for bulk scale manufacturing. To address these limitations we planned to develop unnatural analogues of proline that could catalyze the reactions with lower catalyst loadings …

Electrogenerated Chemiluminescent Studies Of 9,10-Diphenylanthracene, Rubrene, Tris(2,2'-Bipyridine)Ruthenium(Ii) Species, And Their Derivatives For Sensitive Detection Of Biomolecules, Pradip Bastola

Dissertations

This dissertation explored and investigated the coreactant electrogenerated chemiluminescent (ECL) properties of unmixed and mixed systems of highly efficient ECL emitters, such as 9,10-diphenylanthracene (DPA), rubrene (RUB), and tris(2,2′-bipyridine)ruthenium(II) [(Ru(bpy)₃²⁺)] species as well as their water-soluble derivatives, which can serve as ECL labels for sensitive bioanalysis of single or multiple analytes. The screening of most favorable common ECL coreactants, their concentration effects along with the effect of working electrode materials on ECL behavior, and energy transfer related interactions between ECL emitters were systematically investigated. In addition, a strategy for improvement of ECL signals with the use of …

Anodic Nanocatalysts For Formic Acid Fuel Cells: An Electrochemical Study, Tamanna F. Shanta Mcfarland

Dissertations

Direct formic acid fuel cells (DFAFCs) have been reported as a prominent source of alternative green energy and solution to imminent energy crisis for the last two decades. The challenge to commercialize DFAFCs is primarily the utilization of cost effective, high performance and durable anodic catalyst for formic acid oxidation (FAO). Consequently, this dissertation addresses the extensive electrochemical study of a number of nanomaterials towards the potential use as electrocatalysts for FAO. Morphology and elemental analyses of the prepared nanomaterials were obtained using electron microscopy techniques.

After a general introduction and overall review of this dissertation (Chapter I), studies of …

Cellulose Reinforced Thermoplastic Composites By In-Situ Ring-Opening Polymerization, Shahab Kashani Rahimi

Dissertations

Over the past two decades, the increasing concern about the negative environmental impacts of synthetic materials has led to rising interests in utilizing renewable natural resources to develop polymer materials with comparable properties and performance to their synthetic counterparts. One of the major fields of interest is polymer composites where the replacement of synthetic fibers with bio renewable natural fibers is of great potential. However, the processing difficulties, in terms of fiber dispersion and thermal stability have limited the application of cellulosic fibers to polymers with low processing temperatures which are mostly hydrophobic polymers. As a result, the true reinforcing …

Property Morphology Correlations Of Organic Semiconductor Nanowires, Frederick Marshall Mcfarland

Dissertations

Chemically doped and non-doped P3HT nanoaggregates are studied to establish a comprehensive understanding of the interplay between their morphology and various optoelectronic properties. One-dimensional nanoaggregates of P3HT are chosen as the model systems here due to their high surface/volume ratio and suitability for microscopic investigations.

Atomic force microscopy (AFM) and kelvin probe force microscopy (KPFM) are used to correlate property/morphology characteristics of non-doped P3HT nanowhiskers. Topographical measurements indicate that individually folded P3HT motifs stack via interfacial interactions to form nanowhiskers in solution. Further aging leads to multi-layered nanowhiskers with greater stability and less instances of π-π sliding of interfacial edge-on …

An Investigation Of The Use Of Cerium And Polyhedral Oligomeric Silsesquioxanes For The Protection Of Polymeric Epoxy Compounds In The Low Earth Orbit Environment, Jessica Miriam Piness

Dissertations

Low Earth orbit presents many hazards for composites including atomic oxygen, UV radiation, thermal cycling, micrometeoroids, and high energy protons. Atomic oxygen and vacuum ultraviolet radiation are of concern for space-bound polymeric materials as they degrade the polymers used as matrices for carbon fiber composites, which are used in satellites and space vehicles due to their high strength to weight ratios. Epoxy-amine thermosets comprise a common class of matrix due to processability and good thermal attributes. Polyhedral oligomeric silsesquioxanes (POSS) have shown the ability to reduce erosion in polyimides, polyurethanes, and other polymers when exposed to atomic oxygen. The POSS …

Formation Of Nanostructured Epoxy Networks Containing Polyhedral Oligomeric Silsesquioxane (Poss) And Silica Nanoparticles, Amit K. Sharma

Dissertations

This dissertation is focused on structure-property-processing relationship studies based on well-defined polyhedral oligomeric silsesquioxane (POSS) modified epoxy networks to present a comprehensive understanding of hybrid network behavior. In this research, a monoamine functional POSS molecule is incorporated into the epoxy monomer as pendant unit to mimic common epoxy structures and then crosslinked to form well-defined epoxy hybrid networks. The POSS cages behave as nanosized pendant unit in the epoxy matrices, while the mass fraction of POSS cages is varied and the effects on physical properties are examined with respect to changes in network architecture.

A novel continuous reactor method is …

Design And Synthesis Of Polymer Brush Surfaces With Complex Molecular Architectures And Morphologies, Wei Guo

Dissertations

The combination of surface-initiated polymerization (SIP) and postpolymerization modification (PPM) is a powerful technique for the fabrication of functional soft surfaces. Better understanding the influence of the aforementioned factors on the PPM effectiveness is valuable for fulfilling the potential of the PPM approach for the fabrication of functional soft surfaces. Specifically, by carefully balancing modification reactivity and limitation of mass transport, polymer brush with composition heterogeneity and gradient along the normal direction of the surface otherwise unattainable by methods of direct polymerization can be fabricated via the PPM approach which opens doors to new routes to polymer brush with complex …

Advancing Structure-Property Relationships In Functional Materials Via Thiol-Ene Photopolymerization, Brian Richard Donovan

Dissertations

Thiol-ene photopolymerizations provide a robust and versatile synthetic pathway to functional materials, and owing to the radical step-growth nature of polymerization and the resulting homogenous network structure, provide non-convoluted insight into how network chemistry influences and dictates macromolecular properties.

The first facet of this dissertation focuses on the design and synthesis of bio-inspired, thin film adhesives for dry and aqueous adhesion. Drawing inspiration from the intertidal marine mussel, Chapter II details the synthesis of adhesive networks containing a monofunctional catechol-based monomer. The inclusion of a catechol group resulted in significant improvements in adhesion on a variety of substrates. In Chapter …

Effect Of Chain Rigidity On Network Architecture And Deformation Behavior Of Glassy Polymer Networks, Kyler Reser Knowles

Dissertations

Processing carbon fiber composite laminates creates molecular-level strains in the thermoset matrix upon curing and cooling which can lead to failures such as geometry deformations, micro-cracking, and other issues. It is known strain creation is attributed to the significant volume and physical state changes undergone by the polymer matrix throughout the curing process, though storage and relaxation of cure-induced strains remain poorly understood. This dissertation establishes two approaches to address the issue. The first establishes testing methods to simultaneously measure key volumetric properties of a carbon fiber composite laminate and its polymer matrix. The second approach considers the rigidity of …

Polyisobutylene Telechelic Prepolymers By In Situ End-Quenching And Post-Polymerization Modifications, Bin Yang

Dissertations

This volume focuses on the development of telechelic polyisobutylene (PIB) prepolymers by combining end-capping of living carbocationic polymerization of isobutylene (IB) with suitable reactants and post-polymerization modifications. Alkylation kinetics of PIB tert-chloride with alkoxybenzenes using either TiCl₄ or AlCl₃ were investigated. Quantitative para-position end-capped products were only achieved if the alkoxybenzene/AlCl₃ molar ratio was greater than unity; while no such molar ratio is required for TiCl₄, but the alkylation rate was slower than AlCl₃ under the same conditions. Photopolymerization kinetics analysis of PIB triphenol tri(meth)acrylates with low and high M_ns, …

Influence Of Multiwall Carbon Nanotubes On Corrosion Performance And Water Hydrogen Bonding Of Epoxy-Amine Thin Films, Greg William Curtzwiler

Dissertations

This dissertation research sought to provide a fundamental basis of understanding to commence the systematic investigation of developing economically viable fully formulated epoxy-amine coating systems containing multiwall carbon nanotubes (MWCNT). Namely, a facile and rapid method for multiwall carbon nanotube surface modification and molecular structure interpretation was developed to assist in designing MWCNT-polymer interactions and achieving high levels of dispersion. Additionally, a rapid and quantitative method was developed to investigate the dispersibility potential of MWCNTs possessing a given surface modification in combination with a dispersion protocol which can further be utilized as a quality control metric in commercial applications. It …

Bioinspired Design Of Wetting And Anti-Wetting Surfaces Via Thiol-Ene Photopolymerization, Li Xiong

Dissertations

Surface wettability is known to have a profound influence in both academic study and industrial application of materials. Superhydrophobic surfaces, with a static contact angle higher than 150° and a contact angle hysteresis lower than 10°, have received continued attention for their broad applications, such as self-cleaning, antifogging and frosting, and drag reduction. The continuous development of materials and approaches that used to create superhydrophobic surfaces has led to further exploration of coatings with other desirable properties such as superamphiphobicity, mechanical robustness and thermal stability.

In this work, coatings with super wetting and super anti-wetting properties were designed and fabricated …