Physical Sciences and Mathematics Commons^™

The Effect Of Curing And Zirconium Content On The Wettability And Structure Of A Silicate Hybrid Sol-Gel Material, Emma Machugh, Maikki Cullen, Alicja Kaworek, Brendan Duffy, Mohamed Oubaha

Articles

Functional hybrid sol-gel coatings have been developed for numerous applications with a wide range of wettabilities. This study proposes to investigate the relationship between the structure and the wetting properties of a zirconium modified silicate hybrid sol-gel coating. The structures of the coatings were altered by varying the content of zirconium, and the curing process, while keeping the sol-gel preparation conditions identical. The structure of the materials was characterized by FTIR, 29Si NMR and SEM. The thermal properties and the wettability are identified by DSC and contact angle measurements, respectively. By corroborating the structural and wettability analyses, it is shown …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

Sol-Gel Characteristics For Corrosion Resistance Of Anodised Aluminium, Michael Whelan, John Cassidy, Brendan Duffy

Articles

Conventional anodising electrolytes based on sulphuric acid, oxalic acid and phosphoric acid have been used to form nanoporous layers on AA3003-H14 and sealed with silane based sol-gel sealers. It is shown that the sol-gel chemistries have varying levels of pore penetration depending on the synthesis conditions. The extent of sol-gel penetration and pore sealing is analysed by electron microscopy and energy dispersive x-ray spectroscopy. To describe the sealing phenomena observed a sol-gel penetration and sealing rating has been proposed to explain the interactions of the sol-gels with the pores of the anodised layers. The corrosion resistance of the sol-gel sealed …

A Systematic Study Of The Effect Of Silver On The Chelation Of Formic Acid To A Titanium Precursor And The Resulting Effect On The Anatase To Rutile Transformation Of Tio2, Nicholas Nolan, Michael Seery, Steve Hinder, Linda Healy, Suresh Pillai

Articles

Anatase to rutile transition in an unmodified synthetic titania usually occurs at a temperature range of 600 – 700 °C. Various methods such as addition of metallic and non-metallic dopants and modifying the precursor have previously been reported to influence the anatase to rutile transition temperature. In the current study, the effect of addition of increasing amounts of silver to the extent of chelation of a formate group to a titanium precursor and the resulting effects on the transformation of anatase to rutile has been studied. The addition of silver (0, 1, 3 and 5 mol %) on the anatase …

Spectroscopic Investigation Of The Anatase-To-Rutile Transformation Of Sol-Gel Synthesised Tio2 Photocatalysts, Nicholas Nolan, Suresh Pillai, Michael Seery

Articles

Among the three major phases in titania, anatase is reported to be a better photocatalytically active phase. Anatase to rutile transformations, under normal conditions, usually occurs at a temperatue range of 600- 700 °C. Various chemical additives have previously been employed to extend the anatase transition to higher temperatures. Effect of employing various concentrations of formic acid and water on phase transition has systematically been studied by XRD, FTIR and Raman spectroscopy. A considerably higher anatase phase (41%) has been obtained at 800 ºC and 10% anatase composition is retained after annealing the materials at 900 ºC for the optimised …

A Novel Processing Route For The Production Of Nanoparticulate Zinc Oxide Using An Isophthalate Precursor, Grainne Duffy, Declan Mccormack, Suresh Pillai

Articles

Zinc oxide nanoparticles have been processed from a novel isophthalate precursor. In contrast to those processed from an oxalate precursor, this material exhibits three-dimensional, non-directional aggregation behaviour.

Such non-directional aggregation of uniaxial crystallites may allow for the production of structures with a higher proportion of catalytically active surfaces than can be prepared through conventional sol–gel methods. XRD,

FTIR, TEM and SEM were used to characterize the synthesized materials.

Zinc oxide particles synthesized by using isophthalic acid (C6H4-1,3-(COOH)2) are found to be slightly smaller than the previously reported materials prepared through chelation with oxalic acid (H2C2O2・2H2O).