Physical Sciences and Mathematics Commons^™

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …

Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel

Masters Theses

"The Tuscaloosa Marine Shale (TMS) is an unconventional shale reservoir located in southeast Louisiana and southwest Mississippi. Limited mineralogical and geochemical data for the TMS have been published. The data that do exist indicate that the formation is heterogeneous. Consequently, previous investigators and oil and gas companies have not managed to effectively link mineralogical and chemical changes to oil and gas production in the TMS. These linkages are critical to establish for future exploration efforts. In this study, we attempt to establish these relationships by gathering all existing mineralogical and chemical data in the TMS, including newly acquired data from …

An Integrated Wellbore Stability Study To Mitigate Expensive Wellbore Instability Problems While Drilling Into Zubair Shale/Sand Sequence, Southern Iraq, Ahmed Khudhair Abbas

Doctoral Dissertations

”The Zubair Formation is the most prolific reservoir in Iraq, which is comprised of sandstones interbedded with shale sequences. Due to the weak nature of the shale sequence, the instability of a wellbore is one of the most critical challenges that continuously appears during drilling across this formation. Historically, over 90% of wellbore problems in the Zubair Formation were due to wellbore instability. Problems associated with wellbore instability, such as tight hole, shale caving, stuck logging tools along with subsequent fishing, stuck pipe, and sidetracking result in increasing the non-productive time. This non-productive time has cost an enormous amount of …

Continuous-Flow Synthesis Of Fine Chemicals And Pharmaceutical Compounds Over Intelligent Organocatalysts With Bifunctional Reactivity, Abdo-Alslam Alwakwak

Doctoral Dissertations

“Many biological systems that utilize organic active sites to catalyze reactions under mild conditions invoke cooperative catalytic pathways, whereby two or more active sites work together to activate the reactant(s). The use of cooperative (bifunctional) catalysts and continuous flow chemistry (a reaction within the narrow channels of a micro‐ or microfluidic reactor) are commonplace in sustainable chemical transformation and attract a great deal of interest with respect to economic and environmentally-sustainable production of fine chemicals, pharmaceuticals, and agrochemicals, water treatment, as well as upgrading of biomass feedstocks. Although, some methods have been developed for immobilization of bifunctional catalysts for cooperative …

Enhanced Electrochemical Performance Of Li-Ion Battery Cathodes By Atomic Layer Deposition, Yan Gao

Doctoral Dissertations

”Li-ion battery now plays an irreplaceable role in supplying green and convenient energy. In this work, atomic layer deposition (ALD) was used to modify Li-ion battery cathode particles for performance enhancement.

An ultrathin and conductive CeO₂ ALD film was deposited on Li-rich layered cathode particles, of which the specific capacity and cyclic stability were significantly improved. On the same cathode particles, FeO_x ALD and post-annealing resulted in a stable and conductive surface spinel phase to improve the performance.

Synergetic TiN coating and Ti doping were performed on a LiFePO₄ (LFP) cathode and extended its cycle life. The …

Characterization Of A Green Electric Solid Propellant For Electric Propulsion, Matthew Scott Glascock

Doctoral Dissertations

"Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled and extinguished) through the application and removal of an electric current. These propellants are also being considered for use in ablative pulsed plasma thruster and multimode systems. In this work, the behavior and performance of a novel green electric solid propellant operating in an electrothermal ablation-fed pulsed plasma thruster was investigated. Using an inverted pendulum micro-Newton thrust stand, the impulse bit and specific impulse of the device using the electric solid propellant were measured for short-duration and long-duration runs to end-of-life, at energy levels of …

Development Of Functional Ionic Liquids For Separation And Recovery Of Rare Earth Elements, Mostafa Khodakarami

Doctoral Dissertations

“This research focused on the design and synthesis of task-specific ionic liquids for enhanced extraction and separation of rare earth elements (REEs). Two novel ammonium-based functional ionic liquids (FILs) with oxygen donating groups: trioctyl(2-ethoxy-2-oxoethyl)ammonium dihexyl diglycolamate, [OcGBOEt][DHDGA], and tricaprylmethylammonium dihexyl diglycolamate, [A336][DHDGA] were synthesized and tested for the recovery and separation of selected REEs from aqueous solutions. Functionalities with different denticities were incorporated into both anionic and cationic parts of ionic liquids, which are solely composed of incinerable atoms including C, H, O, and N. The structural, physical, and chemical properties of the synthesized FILs were studied using nuclear magnetic …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Integrated Study On The Applicability Of Co₂-Eor In Unconventional Liquids Rich Reservoirs, Dheiaa Khafief Khashan Alfarge

Doctoral Dissertations

"Unconventional Liquids Rich Reservoirs (ULR) such as Bakken, Niobrara, and Eagle Ford have become the main target for oil and gas investors as conventional formations started to deplete and diminish in number. These unconventional plays have a huge oil reserve; however, the predicted primary oil recovery is still low as an average of 7.5 %. Unconventional Improved Oil Recovery (UIOR) techniques are still a new concept in the oil industry because there is no commercial project for any IOR technique so far. Injecting carbon dioxide (CO₂) might be the most potential strategy to improve oil recovery in such complex plays. …

Characterization Of The Cylinderical Split Internal-Loop Photobioreactor With Scenedesmus Microalgae: Advanced Culturing, Modeling, And Hydrodynamics, Laith S. Sabri

Doctoral Dissertations

"Microalgae are fast growing photoynthetic microorganisms and it have very wide range of industrial applications such as biofuels and wastewater treatment. These cells can be grown in a wide variety of systems ranging from open culture systems (e.g., ponds) to closed culture systems of photobioreactor (e.g., airlift). The open culture systems exist in the external environment, and hence, are not intrinsically controllable. However, the microalgae production in enclosed photobioreactors faces prohibitively high production costs with special difficulty in reactor design and scale-up. The light availability and utilization efficiency in the photobioreactor in terms of design and scale-up consider as the …

Overview Of Co₂ Leakage Problems And Sealants For Co₂ Leakage Remediation, Shudai Peng

Masters Theses

"Excessive Carbon Dioxide (CO₂) emission has become a serious issue and caused lots of environmental problems. Carbon Capture and Storage (CCS) program has been developed to reduce the CO₂ content in the atmosphere. CO₂ storage has been targeted mainly on depleted oil or gas reservoirs and deep saline aquifers. However, leakage could occur through wellbores, cap rocks, formation faults, and fractures during and after CO₂ injection. To minimize the risk, different types of sealants have been investigated to prevent CO₂ leaks. The aim of this thesis is to provide a comprehensive review of the materials which could be used as …

Deformation Processes At The Leading Edge Of The Sevier Fold And Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Masters Theses

"Deformation processes leading to formation and abandonment of 'triangle zones' along the leading edge of the Sevier fold and thrust belt are investigated near Kanarraville, Utah through construction of a detailed geologic map and cross-section along Spring Creek. Here the eastern limb of the Kanarra fold, a Sevier structure, is well exposed along the Hurricane Cliffs due to uplift and erosion of the footwall of the Hurricane Fault. The east-verging Kanarra fold changes from upright to overturned within Spring Creek. Within the fold limb, parasitic folds, minor thrust faults, and duplex structures result in local tectonic overthickening of units and …

Evaluation Of Swelling And Re-Swelling Of Preformed Particle Gels (Ppg) When Exposed To Co₂, Sujay Suresh

Masters Theses

"Long term water/gas flooding induces high permeability channels in reservoirs. Reservoir heterogeneity becomes the most prominent challenge faced in mature oil fields. Gel treatment has been a proven solution to counter the problem of reservoir heterogeneity, to provide in-depth treatment and improve the sweep efficiency for reservoirs. Preformed particle gels (PPGs) were developed as an alternative to in-situ gels as they preferentially penetrate and shutoff high permeability zones, leaving the low permeability zones undamaged. These gels have been predominantly used in water flooding projects, but have not been employed in carbon dioxide (CO₂) flooding projects. CO₂ Resistant …

Study Of Surface Complexation And Mineral Dissolution During Water-Rock Interaction In High Salinity Waterflooding At Elevated Temperatures, Sameer Salasakar

Masters Theses

"High salinity waterflooding for carbonate reservoirs is efficient and cheap method used for improved oil recovery. Various mechanisms have been proposed including adsorption/desorption on rock surface, mineral dissolution and precipitation, multicomponent ion exchange, interfacial tension reduction, fine migration and double layer expansion. These all process alter the wettability which leads to improved oil recovery.

Objective of this study was to understand processes that occur during water-rock interaction when high salinity water is flooded into the reservoir. In this work, effect of temperature on water-rock interaction is studied along with effect of pH and specific surface areas of calcite at normal …

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …

Characterization Of Fracture Initiation In Non-Cylindrical Buckle Folds Using 3d Finite Element Analysis, Eli Jacob Steinbeck

Masters Theses

"The spatial distribution of fracture sets associated with buckle folds has been well documented in field studies. There are difficulties, however, in placing accurate constraints on the timing of the initiation of individual fracture sets during the deformation history of the fold under in-situ conditions. This study investigates specific conditions that give rise to the initiation of various fracture sets in the hinge and limb of a pericline, based on an analysis of the effective stress evolution during the processes of buckling and erosional unloading. A 3D finite element modeling approach is used to simulate the effective stress evolution in …

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …

Oxidative Dehydrogenation Of Light Alkanes With Carbon Dioxide, Marktus A. Atanga

Masters Theses

”Most experts studying the global ecosystem and climate suggest that rising anthropogenic CO₂ emissions have contributed to significant global climate change in the last half-century. The development of effective strategies that convert CO₂ into energy, fuels, and chemicals are greatly preferable to oceanic or geologic sequestration options because they offer the potential to create new commercially-viable products from renewable carbon feedstock. On the other hand, the selective oxidative dehydrogenation of light alkanes (C₂-C₄) to corresponding olefins, methane reforming, and methane coupling are the major challenges for producing valuable and versatile feedstocks. The oxidative dehydrogenation …

Synthesis Of Different Sizes & Functions Nanoparticles, Jiaming Geng

Masters Theses

"Nanogels, whose size range from 1 to 100nm, have been interested in many research areas: cosmetics, pharmaceuticals, catalysts, photochemistry, and in optical switches or sensors. In Petroleum Engineering area, nanogels can be used as conformance control agent and emulsion stabilizer. And after grafting functional groups or hybrid, nanogels can be used as tracer for the visual modeling.

Though nanoparticles have been studied for more than 20 years, few of them are about nanogels. In the thesis, stirring rate, surfactant type and concentration were found have a large impact on the synthesis of nanogels. And cationic nanogels have salt and acid …

Process Design, Dynamics, And Techno-Economic Analysis Of A Sustainable Coal, Wind, And Small Modular Nuclear Reactor Hybrid Energy System, Kyle Lee Buchheit

Doctoral Dissertations

"The availability of cheap electricity is one of the biggest factors for improving quality of life. With the debate on the effects of carbon dioxide emissions continuing, several countries have either implemented or are considering the reduction of emissions through various economic means. The inclusion of a monetary penalty on carbon emissions would increase the prices of electricity produced by carbon-based sources. The push for large-scale renewable sources of energy has met problems with regards to energy storage and availability. The proposed coal, wind, and nuclear hybrid energy system would combine a renewable energy source, wind, with traditional and stable …

Steam Flooding Screening And Eor Prediction By Using Clustering Algorithm And Data Visualization, Na Zhang

Masters Theses

"Enhanced Oil Recovery (EOR) techniques are vitally important in the oil industry because these techniques could not only extend the life of wells, but also produce 10% to 30% additional oil from the reservoir. However, selecting the most suitable EOR techniques for unknown reservoirs is not easy for decision making. Based on literature, EOR screening criteria could help to find the best candidates for unknown projects, which is classified into two categories: conventional EOR screening and advanced EOR screening. In this research, an artificial intelligent (AI) method, hierarchical clustering algorithm, is adapted to analyze both steam flooding projects and worldwide …

Degradable Nanocomposite Preformed Particle Gel For Chemical Enhanced Oil Recovery Applications, Paul Tongwa

Doctoral Dissertations

”This work presents two new materials that can be potentially used in conformance control to increase ultimate oil recovery from mature oilfields.

The first product is a degradable nanocomposite preformed particle gel for enhanced in-depth mobility control. Three different types of degradable nanocomposite preformed particle gels were synthesized. These three nanocomposite hydrogels were made using Laponite XLG, Calcium Montmorillonite, and Sodium Montmorillonite nanomaterials. It was observed that after degradation, Laponite XLG nanocomposite hydrogels had the highest post-degradation viscosity (4437 cp), followed by sodium nanocomposite hydrogels (129 cp), and lastly calcium nanocomposite hydrogels (75.5 cp). Thus, degradable Laponite XLG nanocomposite hydrogels …

Gold-Magnetite Nanoparticle-Biomolecule Conjugates: Synthesis, Properties And Toxicity Studies, Akshay Pariti

Masters Theses

"This thesis study focuses on synthesizing and characterizing gold-magnetite optically active magnetic nanoparticle and its conjugation with biomolecules for biomedical applications, especially magnetic fluid hyperthermia treatment for cancerous tissue. Gold nanoparticles have already displayed their potential in the biomedical field. They exhibit excellent optical properties and possess strong surface chemistry which renders them suitable for various biomolecule attachments. Studies have showed gold nanoparticles to be a perfect biocompatible vector. However, clinical trials for gold mediated drug delivery and treatment studied in rat models identified some problems. Of these problems, the low retention time in bloodstream and inability to maneuver externally …