Physical Sciences and Mathematics Commons^™

An Intelligent Attitude Determination And Control System Concept For A Cubesat Class Spacecraft, Jeremy Straub

Jeremy Straub

An attitude determination and control system (ADCS) is used to orient a spacecraft for a wide variety of purposes (e.g., to keep a camera facing Earth or orient the spacecraft for propulsion system use). The proposed intelligent ADCS has several key features: first, it can be used in multiple modes, spanning from passive stabilization of two axes and unconstrained spin on a third to three-axis full active stabilization. It also includes electromagnetic components to ‘dump’ spin from the reaction wheels. Second, the ADCS utilizes an incorporated autonomous control algorithm to characterize the effect of actuation of the system components and, …

Software Design For An Intelligent Attitude Determination And Control System, Matthew Russell, Jeremy Straub

Jeremy Straub

Space exploration and satellite missions often carry equipment that must be accurately pointed towards distant targets, therefore making an effective attitude determination and control system (ADCS) a vital component of almost every spacecraft. However, the effectiveness of the ADCS could decrease drastically if components shift during launch, degrade in efficiency over the course of the mission, or simply fail. Prior work [0] has presented a concept for a adaptive ADCS which can respond to changing spacecraft conditions and environmental factors. This poster presents an implementation for a lazy learning ADCS is presented that uses past maneuver data to construct and …

Improving Satellite Security Through Incremental Anomaly Detection On Large, Static Datasets, Connor Hamlet, Matthew Russell, Jeremy Straub, Scott Kerlin

Jeremy Straub

Anomaly detection is a widely used technique to detect system intrusions. Anomaly detection in Intrusion Detection and Prevent Systems (IDPS) works by establishing a baseline of normal behavior and classifying points that are at a farther distance away as outliers. The result is an “anomaly score”, or how much a point is an outlier. Recent work has been performed which has examined use of anomaly detection in data streams [1]. We propose a new incremental anomaly detection algorithm which is up to 57,000x faster than the non-incremental version while slightly sacrificing the accuracy of results. We conclude that our method …

Scheduling Algorithm Development For An Open Source Software And Open Hardware Spacecraft, Calvin Bina, Jeremy Straub, Ronald Marsh

Jeremy Straub

The efficacy of each type of scheduler is assessed rela-tive to the goal of having a time and resource efficient scheduling algorithm. The scheduler must ensure suc-cessful spacecraft operations and maximize the perfor-mance of tasks relative to performance constraints and their respective due dates.

An Onboard Distributed Multiprocessing System For A Cubesat Spacecraft Created From Gumstix Computer-On-Module Units, Michael Wegerson, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter Small Spacecraft Development Initiative at the University of North Dakota [1] aims to make ac-cess to space for research and educational purposes easier by enabling the creation of low-cost CubeSats. It is creating the Open Prototype for Educational Nanosats (OPEN), a framework for developing a 1-U CubeSat space-craft with a parts cost of less than $5,000 [2]. The designs [3], documentation and computer code from this will be made publically available to enable the development of programs at other institutions.

Considering Scheduling Algorithms For An Open Source Software Spacecraft, Calvin Bina, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter Small Satellite Development Initiative at the University of North Dakota [1] is working make space research and education more accessible world-wide [2], through the design and public release of a complete set of plans, software and other documents (see [3]) for a 1-U CubeSat. This design targets a parts cost of no more than $5,000 [4]. These lowered costs, combined with the efficiencies of the CubeSat form fac-tor [5] and free-to-qualified-developer launch services [6, 7] should facilitate greater access to space for the ed-ucational, research and other communities.

Work Done On The Operating Software For Openorbiter, Dayln Limesand, Timothy Whitney, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter Program aims to develop a tem-plate for a CubeSat spacecraft that can be used world-wide to reduce spacecraft development costs1. Unlike other approaches, which may require $50,000 in upfront hardware costs2 or $250,000 in design expenses2, an OPEN-class spacecraft can be built with a parts budget of under $5,0003. This aims to enable low-cost educa-tional missions and missions in developing regions4.

Scheduling Algorithm Development For An Open Source Software Spacecraft, Calvin Bina, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter project at the University of North Dakota is working to develop a set of designs for a CubeSat class spacecraft as well as a working, modular collection of open source code that can be used by other CubeSat projects as a starting point for development. The availability of these designs and this codebase should foster accelerated development for other CubeSat projects, allowing those projects to focus their effort on their own application area, instead of reinventing the proverbial wheel. One aspect of this is to implement a task scheduler which will run on a Raspberry Pi flight computer …

An Overview Of The Openorbiter Autonomous Operating Software, Dayln Limesand, Timothy Whitney, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter spacecraft aims to demonstrate the efficacy of the Open Prototype for Educational Nanosats (OPEN) framework. Software is an important part of this framework. This paper discusses the operating software for the spacecraft (which runs on top of the Linux operating system to command spacecraft operations). It presents an overview of this software and then pays particular attention to the aspects of software design that enable onboard autonomy. It also discusses the messaging scheme that is used onboard and the testing and validation plan. Finally, it discusses system extensibility, before concluding.

Swarm Intelligence, A Blackboard Architecture And Local Decision Making For Spacecraft Command, Jeremy Straub

Jeremy Straub

Control of a multi-spacecraft constellation is a topic of significant inquiry, at present. This paper presents and evaluates a command architecture for a multi-spacecraft mission. It combines swarm techniques with a decentralized / local decision making architecture (which uses a set of shared blackboards for coordination) and demonstrates the efficacy of this approach. Under this approach, the Blackboard software architecture is used to facilitate data sharing between craft as part of a resilient hierarchy and the swarm techniques are used to coordinate activity. The paper begins with an overview of prior work on the precursor command technologies and then presents …

The Critical Role Of Cubesat Spacecraft In A Multi-Tier Mission For Mars Exploration, Jeremy Straub

Jeremy Straub

A multi-tier architecture is under development (with similar craft heterogeneity to Fink's work on ‘tier scalable’ missions) which will facilitate autonomous local control of multiple heterogeneous craft. This mission architecture has been developed with a Mars mission in mind and has included CubeSats in a variety of critical mission roles.

Two concepts will be presented: the addition of CubeSats to a larger-scale multi-tier mission, where the CubeSats serve a supporting role and a mission driven by CubeSat orbital capabilities. In the first, CubeSats are utilized to augment the area of spatial coverage that can be obtained and the temporal coverage …

Update On The Operating Software For Openorbiter, Dayln Limesand, Christoffer Korvald, Jeremy Straub, Ronald Marsh

Jeremy Straub

The operating software team of the OpenOrbiter project has been tasked with developing software for general spacecraft maintenance, performing mission tasks and the monitoring of system critical aspects of the spacecraft. To do so, the team is developing an autonomous system that will be able to continuously check sensors for data, and schedule tasks that pertain to the current mission and general maintenance of the onboard systems. Development in support of these objectives is ongoing with work focusing on the completion of the development of a stable system. This poster presents an overview of current work on the project and …

Scheduling For A Small Satellite For Remote Sensed Data Collection, Donovan Torgerson, Christoffer Korvalnd, Jeremy Straub, Ronald Marsh

Jeremy Straub

Small satellites, such as CubeSats, serve as excellent platforms for the collection of data that can be supplied to a geographic information system. To serve this need, they require a robust and lightweight task scheduler due to their limited onboard power production capabilities as well as internal space restrictions. Because of these constraints, schedules must be optimized; however, the scheduling optimization process must be performed using limited processing (CPU) power.

Several considerations must be taken into account in order to make a scheduler for these systems. This poster highlights requirements such as inter-dependency of onboard systems, and limited windows of …

Roofsat: Teaching Students Skills For Software Development For Gis Data Collection And Other Activities, Jeremy Straub, Ronald Marsh, Donovan Torgerson, Christoffer Korvald

Jeremy Straub

Small Spacecraft provide an excellent platform for the collection of geospatial data. In order to enable the low-cost creation of small remote sensing space-craft in a university environment, a training pathway for students is required. The Realistic Operational Ob-ject for Facilitating Software Assessment and Testing (RoofSat) serves to provide students with experience developing software for a small satellite platform typi-cal of those used for remote sensing missions. It al-lows software to be tested with hardware that re-sponds in a similar manner to that found on the satel-lite for a fraction of the cost of development. This poster details the goals …

Enabling Interplanetary Small Spacecraft Science Missions With Model Based Data Analysis, Jeremy Straub

Jeremy Straub

Small spacecraft operating outside of Earth orbit are significantly constrained by the communica- tions link available to them. This is particularly true for stand-alone craft that must rely on their own antenna and transmission systems (for which gain and available power generation are limited by form factor); it is also applicable to ‘hitchhiker’-style missions which may be able to utilize (quite likely very limited amounts of) time on the primary spacecraft’s communications equip- ment for long-haul transmission.

This poster presents the adaptation of the Model-Based Transmission Reduction (MBTR) frame- work’s Model-Based Data Analysis (MBDA) component for use on an interplanetary …

A Review Of Online Collaboration Tools Used By The Und Openorbiter Program, Jeremy Straub, Christoffer Korvald

Jeremy Straub

The OpenOrbiter program at the University of North Dakota is a student-initiated, student-run effort to design, develop, test, launch and operate a CubeSat-class spacecraft to validate the designs of the Open Prototype for Educational NanoSatellites (a framework that will be made publically-available to allow faster and lower-cost missions at other educational institutions worldwide). OpenOrbiter involves (at various participation levels) over 200 faculty and students spanning five colleges and ten departments. To coordinate this large group of participants who comprise over seventeen teams and work at disjoint hours in a plethora of locations, online project management, software source control and hardware …

Payload Processing Aboard An Open Source Software Cubesat, Jon Sand, Kyle Goehner, Christoffer Korvald, Josh Berk, Jeremy Straub

Jeremy Straub

The Open Prototype for Educational NanoSats (OPEN) is a system that focuses on reducing spacecraft mission costs. It provides a set of designs that is freely available to anyone online. The OpenOrbiter CubeSat provides designs to create a small satellite using economical materials available allowing a parts budget of under $5,000. One aspect of this design is CubeSat payload processing software. This is the process of taking a single image, or multiple images taken at the same time, and manipulate them. This manipulation an include compression, mosaicing, super resolution, or any combination thereof. The first step in this process is …

The Development Of Payload Software For A Small Spacecraft, Kyle Goehner, Christoffer Korvald, Jeremy Straub, Ronald Marsh

Jeremy Straub

The OpenOrbiter project is a multi-department effort to design and build a small spacecraft which will demonstrate the feasibility of the Open Prototype for Educational NanoSats (OPEN) framework. This framework will reduce cost of small spacecraft creation by providing design plans for free. The focus of the payload software group is to design and implement an onboard task processing and image processing service. Currently the project is in the development phase and most large design decisions have been made. This poster presents the major design decisions that have been made for the payload software and how they will affect the …

Sensor And Computing Resource Management For A Small Satellite, Abhilasha Bhatia, Kyle Goehner, John Sand, Jeremy Straub, Atif Mohammad, Christoffer Korvald

Jeremy Straub

A small satellite in a low-Earth orbit (e.g., approximately a 300 to 400 km altitude) has an orbital velocity in the range of 8.5 km/s and completes an orbit approximately every 90 minutes. For a satellite with minimal attitude control, this presents a significant challenge in obtaining multiple images of a target region. Presuming an inclination in the range of 50 to 65 degrees, a limited number of opportunities to image a given target or communicate with a given ground station are available, over the course of a 24-hour period. For imaging needs (where solar illumination is required), the number …

Exposing Multiple User-Specific Data Denominated Products From A Single Small Satellite Data Stream, Atif F. Mohammad,, Emanuel Grant, Jeremy Straub, Ronald Marsh, Scott Kerlin

Jeremy Straub

This paper presents a research work on small satellite data stream and related distribution to associated stakeholders, which is a field that needs to get explored in more detail. The algorithm that is presented to extract USDDP (User-Specific Data Denominated Products) is a self managing body, which will be within as Open Space Box environment or OSBE as a novel idea. It contains an individual stream transmitted by the small satellite, which later is to be converted into USDDP. The context defined here deals with area in detail. Contexts are vitally important because they control, influence and affect everything within …

Model-Based Software Engineering For An Imaging Cubesat And Its Extrapolation To Other Missions, Atif Mohammad, Jeremy Straub, Christoffer Korvald, Emanuel Grant

Jeremy Straub

Small satellites with their limited computational capabilities require that software engineering techniques promote efficient use of spacecraft resources. A model-driven approach to software engineering is an excellent solution to this resource maximization challenge as it facilitates visualization of the key solution processes and data elements.

The software engineering process utilized for the OpenOrbiter spacecraft, which is a remote sensing technology demonstrator, is presented. Key challenges presented by the Open Orbiter project included concurrent operation and tasking of five computer-on-module (COM) units and a flight computer and the associated data marshaling between local and general storage. The payload processing system (consisting …

Open Space Box Model: Service Oriented Architecture Framework For Small Spacecraft Collaboration And Control, Atif F. Mohammad, Jeremy Straub

Jeremy Straub

A Cubesat is a small satellite with very less competence to compute, it requires software engineering techniques, which can enhance the computational power for this small box. A model-driven approach of software engineering, which is called OSBM or Open Space Box Modeling technique, is an excellent solution to this re-source maximization challenge. OSBM facilitates apparition of the key solution pro-cesses computation and satellite related data elements using Service Oriented Ar-chitecture 3.0 (SOA 3.0) as base to work on to design services. The key challenges that can be handled by utilizing OSBM include concurrent operation and tasking of few as five …