Occupational Health and Industrial Hygiene Commons^™

Implementación De Políticas De Prevención Y Control De La Obesidad Infantil En Estados Unidos Y Latinoamérica: Lecciones Para La Investigación Y La Práctica Transfronterizas, Mireya Vilar-Compte, Rafael Perez-Escamilla, Elizabeth Rhodes, Olga L. Sarmiento, Camila Corvalan, Rachel Sturke, Susan Vorkoper

Department of Public Health Scholarship and Creative Works

Aunque se han hecho avances en el desarrollo y aplicación a gran escala de inter-venciones eficaces contra la obesidad infantil, los retos siguen siendo importantes. Nuestro objetivo era comprender las causas del éxito de Estados Unidos y los países latinoamericanos en la implementación de políticas y programas (PYP) contra la obe-sidad e identificar oportunidades de mejora aplicando los principios de la ciencia de la implementación. Seleccionamos tres estudios de comparación de casos: (1) el etique-tado frontal en los envases de alimentos (México y Chile), (2) los programas de calles abiertas y calles para el juego (Colombia y Estados Unidos) y …

Classification Des Sols Et Sélection Des Systèmes D’Étançonnement Pour L’Excavation Des Tranchées : Résultats Des Essais Réalisés Au Laboratoire De Géotechnique De L’Université Laval – Annexe, Bertrand Galy, Denis Lebœuf, Omar Chaallal, André Lan

Rapports de recherche scientifique

Dans le cadre du projet « Classification des sols et sélection des systèmes d’étançonnement pour l’excavation des tranchées », des tranchées et des excavations de pleine grandeur ont été réalisées dans une argile sensible typique du Québec, à Louiseville. Ces aménagements ont permis d’évaluer et de valider la résistance et le comportement de systèmes d’étançonnement, grâce aux essais suivants :

• Une excavation non soutenue de 5 m de profondeur à paroi verticale;
• Une excavation non soutenue de 4,2 m de profondeur, à paroi talutée (pente de 1,6:1);
• Une tranchée de 6 m de profondeur soutenue avec une boîte de tranchée …

Évaluation Des Méthodes D’Essai Pour Déterminer La Résistance Au Glissement Des Chaussures Sur Des Surfaces Glacées : Document Synthèse, Chantal Gauvin, Atena Roshan Fekr, Yue Li, Gordon Wong, Wayne Cheng, David Pearsall, Tilak Dutta

Rapports de recherche scientifique

En saison hivernale, glisser sur la glace est l’un des principaux risques inhérents aux activités professionnelles exercées à l’extérieur. Alors que de nombreux travailleurs comptent sur leurs chaussures de travail pour les empêcher de glisser, ces derniers se retrouvent souvent devant un choix difficile quand vient le temps de sélectionner les meilleures bottes antidérapantes pour l’hiver. Des méthodes d’essai normalisées existent déjà pour évaluer le coefficient de friction (CdF) des chaussures sur des surfaces autres que la glace. Bien que l’appareil utilisé pour ces tests puisse être utilisé en tandem avec une machine qui permet de fabriquer des surfaces glacées …

Evaluation Of Test Methods For Determining Footwear Slip Resistance On Ice Surfaces, Chantal Gauvin, Atena Roshan Fekr, Yue Li, Gordon Wong, Wayne Cheng, David Pearsall, Tilak Dutta

Rapports de recherche scientifique

Slipping on ice is one of the main risks of outdoor occupational activities during winter. Ice and freezing rain were involved in 14% of slip, trip and fall (STF) accidents from 2014 to 2016 in Quebec. Many workers who perform outdoor activities rely on their boots to prevent them from slipping. However, choosing the best slip resistant footwear is challenging. Currently, there is no standard test method for evaluating slip resistance of footwear on ice surfaces. The SATRA STM 603 whole shoe tester is used in standard test methods (ASTM International, 2019b, F2913-19; International Organization for Standardization [ISO], 2019, 13287:2019) …

Transferts Interorganisationnels De Connaissances Issues D’Enquêtes D’Accident Du Travail, Cheikh Faye

Rapports de recherche scientifique

La Commission des normes, de l'équité, de la santé et de la sécurité du travail (CNESST) est chargée de la gestion du régime québécois de la santé et sécurité du travail (SST). Elle a pour fonctions, notamment l’élaboration, la proposition et la mise en œuvre des politiques dans le domaine de la SST en vue de protéger les travailleurs et d’assurer une meilleure qualité des milieux de travail. À ce titre, la CNESST diligente systématiquement une enquête lorsque survient un accident du travail mortel ou grave à l’exception des accidents de la route et ceux concernant les travailleurs des entreprises …

Improving The Accuracy Of Occupational Hygiene Models Used To Estimate Worker Exposure To Solvent Vapours, Spéro Abattan, Stéphane Hallé, Daniel Drolet, Ali Bahloul, Patrick Eddy Ryan, Wejden Chouchene, Carlos Castro Ruiz, Jérôme Lavoué, Maximilien Debia

Rapports de recherche scientifique

Chaque année, des travailleurs québécois subissent des effets sur leur santé après avoir été exposés à des substances chimiques, notamment à des solvants. La modélisation des expositions professionnelles occupe une place importante dans la prévention des risques. Cette recherche vise à étudier différents aspects de la modélisation pour estimer des expositions professionnelles à des vapeurs de solvants dans le but d’en améliorer la justesse de prédiction. Le travail de recherche a été effectué en deux volets. Grâce à la mise en œuvre de tests à petite échelle (volet I) et à échelle humaine (volet II), les travaux présentés dans cette …

Les Lésions Professionnelles De La Coiffe Des Rotateurs De L'Épaule : Optimiser La Prise En Charge Des Travailleurs Et Favoriser Le Retour Au Travail, François Desmeules, Jean-Sébastien Roy, Joseph-Omer Dyer, Pierre Frémont, Clermont Dionne, Joy C. Macdermid, Michel Tousignant, Annie Rochette

Rapports de recherche scientifique

Les atteintes musculosquelettiques de l’épaule sont fréquentes chez les travailleurs. En plus d’affecter leur qualité de vie, elles entraînent une augmentation de l’absentéisme et une diminution de la productivité, et peuvent conduire à une retraite anticipée. Pour l’année 2017, la province de Québec a enregistré 2,1 milliards de dollars en prestations en lien avec des lésions professionnelles. Environ 8 % de ces réclamations étaient dues à une lésion touchant l’articulation de l’épaule (CNESST, 2018).

Les lésions de la coiffe des rotateurs (CR) sont les affections les plus rencontrées chez les travailleurs présentant une atteinte à l’épaule. Présentement, les cliniciens ne …

Les Lésions Professionnelles De La Coiffe Des Rotateurs De L'Épaule : Optimiser La Prise En Charge Des Travailleurs Et Favoriser Le Retour Au Travail : Matériel Supplémentaire, François Desmeules, Jean-Sébastien Roy, Joseph-Omer Dyer, Pierre Frémont, Clermont Dionne, Joy C. Macdermid, Michel Tousignant, Annie Rochette

Rapports de recherche scientifique

Voir également :

• Les lésions professionnelles de la coiffe des rotateurs de l'épaule : optimiser la prise en charge et en favoriser le retour au travail, RA-1119-fr

• Les lésions professionnelles de la coiffe des rotateurs de l’épaule : optimiser la prise charge et en favoriser le retour au travail : guide de pratique clinique, RG-1119-fr

Développement, Validation Et Application D’Une Méthode Quantitative Pour Évaluer Les Déplacements Des Pieds Des Manutentionnaires, André Plamondon, Antoine Muller, Xavier Robert-Lachaîne, Jasmin Vallée-Marcotte, Denys Denis, Christian Larue, Hakim Mecheri, Philippe Corbeil

Rapports de recherche scientifique

Les troubles musculosquelettiques lors d’activités de manutention manuelle (MM) sont encore très présents dans nos milieux de travail. Les facteurs de risque biomécanique les plus souvent associés aux douleurs au dos incluent la manutention manuelle, les répétitions excessives, les torsions du tronc et les levers de charges lourdes. Plusieurs déterminants d’une tâche de MM ont été étudiés pour déterminer leur importance sur l'exposition physique des travailleurs. Par exemple, la hauteur de la charge, la distance initiale de la charge par rapport au corps, la masse soulevée et la vitesse du soulèvement sont tous des déterminants liés à la …

Confort Thermique Et Mobilité Des Policiers Motards Lors Du Port Du Gilet Pare-Balles : Une Analyse Ergonomique, Steve Vezeau, Alain S. Comtois, Victoria Budico

Rapports de recherche scientifique

Plusieurs études démontrent une diminution importante des risques de décès chez les agents de police qui portent un gilet pare-balles (GPB). Cependant, certains patrouilleurs demeurent réticents à le revêtir à cause des inconforts qu’il engendre sur les plans thermiques et de la mobilité; ceux-ci représentent 8 % de l’ensemble des agents de police et 47 % des agents motards, ce qui accroît les risques pour leur sécurité. Les agents des unités motocyclistes seraient donc parmi les plus exposés, notamment en raison de conditions particulières telles que le travail à l’extérieur, la proximité d’une source de chaleur (moteur), le port de …

Mise Au Point D’Une Méthode De Mesure Objective De L’Effet D’Occlusion Basée Sur La Voix, Hugues Nélisse, Hugo Saint-Gaudens, Franck Sgard, Olivier Doutres

Rapports de recherche scientifique

Lors de l’utilisation de protecteurs auditifs ou de prothèses auditives, le fait d’obstruer le canal auditif peut engendrer un effet indésirable et désagréable, appelé « effet d’occlusion », qui se manifeste notamment par la sensation que notre propre voix sonne différemment, avec de basses fréquences amplifiées, qu’elle est distordue. L’effet d’occlusion est souvent considéré comme une source d’inconfort qui entraîne parfois les utilisateurs de protecteurs ou de prothèses à mal les utiliser ou encore à simplement les retirer. Dans le cas des travailleurs, par exemple, le retrait des protecteurs auditifs peut les exposer à des niveaux de bruits potentiellement dangereux, …

Safety Of Mine Hoists Controlled By Electronic Programmable Systems: Appendix, Laurent Giraud, Bertrand Galy, Louis Germain, Réal Bourbonnière

Rapports de recherche scientifique

Avec l’évolution rapide des nouvelles technologies et la recherche de rentabilité des investissements, les systèmes électroniques programmables (PES) ont été implantés progressivement dans toutes les industries. Le secteur minier n’échappe pas à cette tendance et au fil du temps presque toutes les mines du Québec ont équipé leurs machines d’extraction de tels systèmes. Toutefois, l’introduction de ces nouvelles technologies, requises pour l’amélioration de la productivité minière au Québec, doit aller de pair avec la santé et la sécurité des travailleurs.

Une recension des machines d’extraction en service en 2016 au Québec a montré que le portrait général de l’industrie a …

Qualitative Fitting Characteristics Of Elastomeric Half Face-Piece Respirators Using Isoamyl Acetate Agent, Anahita Fakherpour, Mehdi Jahangiri, Sean Banaee

Community & Environmental Health Faculty Publications

To examine the fitting testing of elastomeric half face-piece respirators (EHRs), a total of 41 candidates were randomly assigned into seven EHRs equipped with organic vapor (OV) cartridges which were commonly used in the Iranian industrial workplaces. The qualitative fitting into the facial dimensions was assessed using the Allegro Isoamyl Acetate fit test kit. While the studied EHRs showed very low passing fit testing rates, the 3M, AoSafety (Medium), and AoSafety (Large) had the highest passing rates with 22.0%, 14.60%, and 9.76%, respectively. The AoSafety ‎(All sizes) delivered a higher passing fit test rate than the 3M brand (29.30 vs. …

Toward A More Perma(Nent) Conceptualization Of Worker Well-Being? A Cross-Cultural Study Of The Workplace Perma Profiler, William P. Jimenez, Xiaoxiao Hu, Rebecca Garden, Xiaofei Xie

Psychology Faculty Publications

We examined the factor structure of the recently developed worker well-being measure the Workplace PERMA Profiler and relationships between PERMA dimensions (i.e., positive emotions, engagement, positive relationships, meaning, accomplishment) and job performance (viz., task performance, organizational citizenship behaviors benefiting individuals and the organization at large). The measure exhibited metric (i.e., weak) invariance across samples of participants from the U.S. (N = 284) and China (N = 420). Additionally, for participants who responded to both the Workplace PERMA Profiler and the performance measures, there was a general pattern of positive PERMA–performance relationships across both …

Evaluating The Incidence Of Melanoma And Lung Cancer Of Current And Former Active-Duty U.S. Military Who Were Deployed In Support Of Operation Enduring Freedom And Operation Iraqi Freedom, Brian Kovacic

Theses and Dissertations--Epidemiology and Biostatistics

The incidence of melanoma and lung cancer has been gradually increasing in the United States over the past three decades with the reputed causes due to etiological and environmental exposures, and tobacco usage. There has been concern that melanoma and lung cancer incidence among military personnel may be associated with deployment to environments with intense sun exposure and increased smoking rates due to post-traumatic stress disorder. The aim of this study was to examine associations between deployment in support of Operation Enduring Freedom (OEF) or Operation Iraqi Freedom (OIF), from 2001 through 2015, with subsequent melanoma and lung cancer incidence. …

Development And Characterization Of An Adaptable Aerosolized Methylene Diphenyl Diisocyanate Generation System, Simon Aubin, Loïc Wingert, Sébastien Gagné, Livain Breau, Jacques Lesage

Études primaires

Reactive semivolatile contaminants, such as isocyanates, can be particularly difficult to assess in occupational environments. While standard methods exist for isocyanates, there are still significant differences between the results they provide for various occupational environments or processes. This study presents the validation of a laboratory system for the generation of controlled atmospheres of isocyanates. A system consisting of different modules generated airborne methylene diphenyl diisocyanate (MDI) by nebulizing a solution into mixing and exposure chambers with control of flow rate, temperature, and relative humidity. Sampling was performed through an eight-port flow splitter that allowed only very slight within-test variability. MDI …

Professional Fishing Industry Fatality, Incident And Injury Data Project, Greg Penney, Bill Byrne, Marcus Cattani

Research outputs 2014 to 2021

Analysis of occupational injuries and fatalities within the wild-catch Australian Commercial Fishing Industry (ACFI) is complicated by fishing crew (masters, deckhands etc) classification as workers being dependent upon the applicable occupational health and safety, and worker’s compensation legislation of the relevant State or Territory. While fishing vessels are considered a workplace consistently across all State’s and Territories Work Health and Safety (WHS) / Occupational Health and Safety (OHS) jurisdiction’s legislation, the people who work on them may not be deemed to be workers or employees as per state and territory workers compensation legislation. The exclusion of fishing crew as workers …

Electromyographical Assessments Of Recommended Neck And Trunk Positions For Dental Hygienists, Margaret F. Lemaster, Kyle J. Kelleran, Maryam Moeini, Daniel M. Russell

Rehabilitation Sciences Faculty Publications

Purpose: Dental professionals are recommended to limit neck and trunk flexion to within 20° of a neutral (0°) body posture, however empirical support for the recommendations is lacking. The purpose of this study was to determine whether there are differences in muscle workload between a range of neck and trunk postures in a population of dental hygiene students.

Methods: Fifteen first semester senior dental hygiene students with no history of neck and trunk injury volunteered to participate. Surface electromyography was used to record muscle activity from two neck extensors muscles, cervical erector spinae (CES) and upper trapezius (UT), and two …

An Investigation Into Employee Exposure To Environmental Tobacco Smoke Within Designated Smoking Areas In The Hospitality Industry, With An Analysis Of Legislative Compliance Of Said Designated Smoking Areas, Hannah Byrne

Masters

Background: Occupational exposure to environmental tobacco smoke (ETS) is still occurring in the hospitality industry and the instance of non-compliant smoking areas required investigation. A designated smoking area covered by a roof where more than 50% of the perimeter of that part is surrounded by one or more walls is deemed a non-compliant smoking area. This study aimed to gather evidence of non-compliances across Dublin, determine current employee exposure whilst also measuring PM2.5 concentrations within smoking areas as well as providing insight into possible immediate health effects of ETS exposure.

Methods: Seventy-five smoking areas (41 located in high, 27 in …

Aerosol Sampling Strategy: Effect Of Particle Transfer To Sampler Covers And Estimation Of Conversion Factors Between The United States And German Methods For Quartz Sampling, Godwin Akpevwe Erekaife

Graduate Theses, Dissertations, and Problem Reports (ETD)

ABSTRACT

AEROSOL SAMPLING STRATEGY: Effect of Particle Transfer to Sampler Covers and Estimation of Conversion Factors between the United States and German Methods for Quartz sampling

GODWIN A. EREKAIFE

In many countries, communities of experts, including industrial hygienists, have developed unique sampling strategies to determine workers’ exposure to aerosolized particles (e.g., metals, wood dust etc.). However, using different sampling and analytical methods for the same chemical often results in different exposure levels for a similar exposure group (SEG). The exposure discrepancies among different countries that are caused by using different measurement strategies are not always systematically defined. Therefore, this study …

Injuries Among Distillery Workers: Workers' Compensation First Reports Of Injury, 2010-2019, Mira Hali Mirzaian

Theses and Dissertations--Public Health (M.P.H. & Dr.P.H.)

AIMS: To identify the most frequent type, nature, and cause of work-related injury amongst distillery workers as well as contributing factors to the injurious event in an effort to inform potential intervention.

METHODS: Workers’ Compensation First Reports of Injury (FROI) from the years 2010-2019 (N=974) were obtained. Variables were created for ‘occupational category’ and ‘accident description’ to assist in the elucidation of the injurious event. The Ratchet Circular Scan Test was used to assess seasonal variation in injury. Kernal Density Analysis was conducted to assess rates of injury by calendar year.

RESULTS: Amongst injured distillery workers, 908 of the injuries …

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

How Effective Is The Filtration Of ‘Kn95’ Filtering Facepiece Respirators During The Covid-19 Pandemic?, Clothilde Brochot, Mohamed Nejib Saidi, Ali Bahloul

Études primaires

Objectives

The high demand of filtering facepiece respirators (FFRs) worldwide during the period of the COVID-19 pandemic has led to a critical situation for decision-makers regarding their supply. After authorizing the use of FFRs certified by other regions of the world, decision-makers in many countries have published alerts, particularly concerning the ‘KN95’ type.

Methods

This paper investigated the filtration performance of different FFRs using an experimental setup already employed during several studies on FFRs filtration performance. Its high-resolution measuring devices permit to determine filtration performance according to the normative criteria: the pressure drop and the filtration efficiency. Eight different FFRs …

Safety In The Quebec Construction Industry: An Overview Of And Possible Improvements In Hazardous Energy Control Using Lockout On Construction Sites By Electricians, Pipefitters, Refrigeration Mechanics And Construction Millwrights, Damien Burlet-Vienney, Yuvin Chinniah, Ayoub Nokra, Abdallah Ben Mosbah

Études primaires

Lack of proper energy control on construction sites leads to numerous worker fatalities every year. Energy control refers to the concept of lockout and other methods used in particular in North America. The aim of this exploratory research project was to achieve a better understanding of energy control practices in the Quebec construction industry for four trades: electricians, pipefitters, refrigeration mechanics and construction millwrights. For each trade, 10 or so semistructured interviews were conducted by means of an open-ended questionnaire, developed with reference to the current provincial regulatory requirements. The 95 experiences described by the 38 participants were compiled by …

Assessing The Comfort Of Earplugs: Development And Validation Of The French Version Of The Coprod Questionnaire, Jonathan Terroir, Nellie Perrin, Pascal Wild, Olivier Doutres, Franck Sgard, Chantal Gauvin, Alessia Negrini

Études primaires

Earplugs are a common form of protection for workers exposed to hazardous noise levels. Their comfort directly impacts the effective protection by influencing their consistent and correct use. Nevertheless, comfort definition may vary according to the studies. Thus, a previous review of the literature has shown that to improve our understanding of perceived comfort and to reduce measurement variability, it is advisable to consider comfort through a multidimensional construct (physical, acoustical, functional and psychological). On this basis, the COPROD (COnfort des PROtections auDitives/COmfort of hearing PROtection Devices) questionnaire was developed. It is intended for people working in noisy environments. Nine …

The Effects Of The Traditional Scaling Technique Versus A Modified Scaling Technique On Muscle Activity And Pinch Force Generation: A Pilot Study, Jessica R. Suedbeck, Cortney Armitano-Lago

Dental Hygiene Faculty Publications

Purpose: Dental hygienists perform precision instrumentation tasks repetitively throughout the workday, placing them at increased risk for developing a musculoskeletal disorder. The purpose of this pilot study was to determine differences in muscle activity and pinch force generation between the traditional scaling technique and a modified scaling technique.

Methods: A convenience sample of dental hygienists (n=12) acted as their own controls in this counterbalance-designed pilot study. Muscle activity and pinch forces were assessed while participants performed traditional and modified scaling techniques with designated instruments on artificial calculus applied to the lower left quadrant of a typodont, for a period of …

Promote Ergonomic Health, Amber W. Hunt, Kimberly B. Lintag-Nguyen

Dental Hygiene Faculty Publications

A wide array of interventions and therapies is available to help dental hygienists stay healthy and reduce pain.

New Taxonomy For Assessing Manual Material Handlers’ Footstep Patterns, Jasmin Vallée-Marcotte, Antoine Muller, Xavier Robert-Lachaine, Véronique Fecteau, Denys Denis, André Plamondon, Philippe Corbeil

Études primaires

Current taxonomies for assessing foot strategies in manual material handling lack exhaustive classification of foot movements and foot positioning. They also fail to consider different instants of the task as checkpoints to relate foot strategies. The goal of the study was first to develop a new taxonomy to assess foot positions and motions considering those limitations. The second goal was to assess reliability and reproducibility using raw agreement percentages, Cohen's kappa, prevalence-adjusted, bias-adjusted kappa and Gwet's AC1. A filmed task consisted of transferring boxes from one pallet to another. Intra- and inter-rater reliability were assessed reviewing 23% and 10%, respectively, …

Comparing Melatonin Use To Bright Light Therapy In Mitigating Cardiovascular Effects Due To Shift Work Disorder In Shift Working Adults, Alexandra Hirt

Capstone Showcase

Introduction: Circadian Misalignment is a term used to describe a mismatch in one’s physiologically determined sleep patters and their actual sleep wake behaviors. Shift workers often end up in a vicious cycle of being in a state of chronic circadian misalignment, which then can lead to health problems, extreme fatigue, and insomnia, known as Shift Work Disorder (SWD).This has been studied in night shift workers who, when compared to daytime workers, have an increased risk of developing metabolic syndrome, type 2 diabetes, and coronary heart disease.These results are not dependent on any behavioral risk factors, such as smoking and poor …

Principle Of An Acoustical Method For Estimating The Centroid Position Of The Earcanal Wall Normal Velocity Induced By Bone-Conducted Stimulation: Numerical Evaluation, Kevin Carillo, Olivier Doutres, Franck Sgard

Études primaires

The occlusion effect is commonly experienced as the altered perception of one’s own physiological noise when the earcanal entrance is blocked. Objectively, this phenomenon corresponds to an acoustic pressure increase in the occluded earcanal. The occlusion effect originates from the earcanal wall normal vibration and depends on the spatial distribution of the latter. At low frequencies, this spatial distribution can be characterized by the position of its centroid along the earcanal middle axis. This paper describes the principle of an acoustical method for estimating this centroid position at low frequencies. The proposed method consists in measuring the eardrum acoustic pressure …