Occupational Health and Industrial Hygiene Commons^™

Seafarers’ Experiences During The Covid-19 Pandemic, B. Pauksztat, M. Grech, M. Kitada, R.B. Jensen

Reports

This report provides an overview of preliminary findings of a study on the experiences of seafarers during the COVID-19 pandemic. The purpose was to examine the impact of the pandemic on seafarers’ work and life on board as well as on their mental health and exhaustion, and identify factors that may mitigate the negative impact of the pandemic

Is Postural Control During Unstable Sitting A Proxy Measure For Determinants Associated With Lumbar Stability?, Christian Larivière, Richard Preuss, Daniel Ludvig, Sharon M. Henry

Études primaires

Abstract

The aim of this study was to test whether determinants associated with lumbar stability can predict performance during unstable sitting (trunk postural control - TPC). If confirmed, unstable sitting could be viewed as a proxy measure for these determinants. Wobbling chair motion was measured in 58 subjects with an inertial sensor, and six outcomes were computed (mean frequency and velocity, frequency dispersion, two variables from the sway density analysis and Lyapunov exponent - short interval) to represent TPC performance. Subjects also performed five other trunk neuromuscular tests to quantify the thickness of back and abdominal muscles and …

Subject-Specific Regression Equations To Estimate Lower Spinal Loads During Symmetric And Asymmetric Static Lifting, F. Ghezelbash, A. Shirazi-Adl, Z. El Ouaaid, A. Plamondon, N. Arjmand

Études primaires

Workplace safety assessment, personalized treatment design and back pain prevention programs require accurate subject-specific estimation of spinal loads. Since no noninvasive method can directly estimate spinal loads, easy-to-use regression equations that are constructed based on the results of complex musculoskeletal models appear as viable alternatives. Thus, we aim to develop subject-specific regression equations of L4-L5 and L5-S1 shear and compression forces during various symmetric/asymmetric tasks using a nonlinear personalized finite element musculoskeletal trunk model. Kinematics and electromyography (EMG) activities of 19 young healthy subjects were collected during 64 different symmetric/asymmetric tasks. To investigate the reliability and accuracy of the musculoskeletal …

Theoretical Investigation Of The Low Frequency Fundamental Mechanism Of The Objective Occlusion Effect Induced By Bone-Conducted Stimulation, Kevin Carillo, Olivier Doutres, Franck Sgard

Études primaires

The objective occlusion effect induced by bone-conducted stimulation refers to the low frequency acoustic pressure increase that results from occluding the ear canal opening. This phenomenon is commonly interpreted as follows: the bone-conducted sound “leaks” through the earcanal opening and is “trapped” by the occlusion device. This instinctive interpretation misrepresents the fundamental mechanism of the occlusion effect related to the earcanal impedance increase and already highlighted by existing electro-acoustic models. However, these models simplify the earcanal wall vibration (i.e., the origin of the phenomenon) to a volume velocity source which, in the authors' opinion, (i) hinders an exhaustive comprehension of …

The Impact Of Covid-19 On Worksite Wellness Programs, Marilyn S. Campbell

Theses and Dissertations--Public Health (M.P.H. & Dr.P.H.)

Introduction: Worksite wellness programs are popular employer offerings as of the last few decades. The COVID-19 pandemic has caused major shifts in behavior since these programs have been implemented. The purpose of this study was to see how the pandemic has affected various offerings within a university worksite wellness program.

Methods: This study is a secondary analysis of a university worksite wellness program, and it compares participation in the various offerings in response to the COVID-19 pandemic by evaluating 2019 participation (pre-pandemic) to 2020 participation (including onset of the pandemic and after). This worksite wellness program, which is available to …

Overlapping Vulnerabilities In Workers Of The Electronics Recycling Industry Formal Sector: A Commentary, Diana M. Ceballos, Daniel Côté, Bouchra Bakhiyi, Michael A. Flynn, Joseph Zayed, Sabrina Gravel, Robert F. Herrick, France Labrèche

Éditoriaux, lettres à l'éditeur

No abstract provided.

Workplace Cleaning For Covid-19: Guidance Document, David Krause,, Cheri Marcham, John Springston, Alex Lebeau, Robert Rottersman, Timothy Froehlig, George (Jerry) Mccaslin

Publications

Critical and essential workplaces operating during this pandemic need to implement procedures to reduce the risk of workers, contractors, vendors, customers, and members of the community becoming infected on their premises. Outside of healthcare and paramedical facilities, the infrastructure and standard practices of infection prevention and control have not been commonplace. Establishing enhanced routine cleaning and disinfection procedures in offices, factories, warehouses, call centers, grocery stores, and other non-healthcare workplaces is a critical step in reducing exposures and infections.

Human Skills Assessment As A Support To Human Factor Management, Lorenzo Comberti, Micaela Demichela, Maria Chiara Leva

Conference papers

Automatization, robotics and Industry 4.0 are deeply modifying the working condition with an expected reduction of the number of workers employed in traditional job and an increasing request of new professions. Despite these technologies could limit the involvement of workers, in some sectors humans are still widely employed, as in assembly line of manufacturing companies. As a consequence of this, the Human Factor (HF) will still have relevant influence in term efficiency, quality and safety performances.

This paper approached the HF analysis into the manufacturing field in an assembly line. This study was focused on the analysis of those human-skills …

Respiratory Flow Characteristics Of Intensive Care Healthcare Workers Performing Patient Care Activities, Shawn R. Williamson

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the United States, under OSHA regulations, all respirators used in the workplace must be certified by the National Institute of Occupational Safety and Health (NIOSH). Under current NIOSH standards, loose-fitting powered air-purifying respirators (PAPR) must provide a minimum operational flow of 170 liters per minute. The objective of this study was to characterize the breathing flow rates of nine health care workers during patient care activities typically performed in a hospital's intensive care unit. This characterization will be used to determine the feasibility of lowering the minimum operational flow rate of PAPRS used in health care settings.

Each participant …

Arsenic Exposure And Methylation Efficiency In Relation To Oxidative Stress In Semiconductor Workers, Chih-Hong Pan, Ching-Yu Lin, Ching-Huang Lai, Hueiwang Anna Jeng

Community & Environmental Health Faculty Publications

This study examined associations between oxidative stress and arsenic (As) exposure and methylation efficiency in semiconductor workers. An As-exposed group (n = 427) and a control group (n = 91) were included. The As-exposure group (n = 427) included 149 maintenance staff members and 278 production staff members representing high As exposure and low As exposure, respectively. The control group included 91 administrative staff members with no or minimal As exposure. An occupational exposure assessment was conducted to assess personal As exposure by measuring As concentrations in urine, hair, and fingernails of the subjects. Urinary As(III), As(V), monomethylarsonic (MMA), and …

Assessment Of Aloe Vera For Qualitative Fit Testing Of Particulate Respirators: A Logistic Regression Approach, Anahita Fakherpour, Mehdi Jahangiri, Saeed Yousefinejad, Mozhgan Seif, Sean Banaee

Community & Environmental Health Faculty Publications

Fit testing procedure is required for filtering facepiece respirators (FFRs) to ascertain an acceptable fit between the skin and facepiece sealing surface. The present study seeks to compare the efficacy of Aloe vera (A. vera) and commercial Bitrex^TM as challenge agents of qualitative fit testing of particulate respirators. An herbal solution consisting of A. vera at seven different concentrations was developed. Threshold Screening Tests (TSTs) of A. vera solutions were compared to Bitrex^TM. To do so, solutions were administered randomly on a total of 62 participants. A placebo was also tested to ensure the taste response being …

Performance Of Mechanical Filters Used In General Ventilation Against Nanoparticles, Clothilde Brochot, Pooya Abdolghader, Fariborz Haghighat, Ali Bahloul

Études primaires

With an equal mass, nanoparticles (NP) have a higher toxicity than particles with the same chemical composition but with larger surface area. However, the toxicological knowledge concerning NP is still insufficient to establish limit values of exposure. To seek the lowest exposure level, filtration is a simple and effective way to capture particles, including NP. According to ANSI/ASHRAE 52.2 standard, ventilation filters efficiency is tested for particles ranging from 0.3 to 10.0 μm. Performances of entire filters for NP are still very limited and particle size of 300 nm (0.3 μm) is commonly used as the most penetrating particle size …

A Validated Uplc-Ms/Ms Method For The Determination Of Aliphatic And Aromatic Isocyanate Exposure In Human Urine, Maggy Lépine, Lekha Sleno, Jacques Lesage, Sébastien Gagné

Études primaires

4,4′-Methylenediphenyldiisocyanate (MDI), toluenediisocyanate (2,4-TDI and 2,6-TDI), and 1,6′-hexamethylenediisocyanate (HDI) are all commonly used in the production of polyurethane-containing materials in different application areas. Workers exposed occupationally to these compounds may develop sensitization with the potential to lead to asthma. Isocyanates are metabolized in vivo by conjugation to macromolecules and/or by acetylation prior to being eliminated in urine. The hydrolysis of urine samples releases free amine compounds from these metabolites as biomarkers of exposure, specific to each parent isocyanate: 4,4′-methylenedianiline (MDA), toluenediamine (2,4-TDA and 2,6-TDA), and hexamethylenediamine (HDA). To address the need for a validated method that could be used for …

Development Of A Method For Quantification Of Toluene Diisocyanate And Methylenediphenyl Diisocyanate Migration From Polyurethane Foam Sample Surface To Artificial Sweat By Hplc-Uv-Ms, Aleksandra Donchenko, Simon Aubin, Sébastien Gagné, Mark Spence, Livain Breau, Jacques Lesage

Études primaires

The US Environmental protection agency (EPA) has published guidance that includes test procedures for evaluating indoor exposure to chemicals from products. One of the test procedures represents the migration test for evaluating potential dermal exposure from home furniture. Such an evaluation involves the chemical measurement of the sweat which is currently unavailable in the literature. The objective of this project was to develop and validate an analytical method for quantification of migration of 4,4′-methylenediphenyl diisocyanate (MDI), 2,6-toluene diisocyanate (2,6-TDI) and 2,4-toluene diisocyanate (2,4-TDI) from a polyurethane (PU) flexible foam to artificial sweat that meets the recommendations of the EPA test …

Evaluation Of Control Strategies For Overhead Work Using Electromyography Of Rotator Cuff Muscles, Hossein Motabar

Graduate Theses, Dissertations, and Problem Reports (ETD)

Work-related musculoskeletal disorders (MSDs) of shoulder have a significant impact on overall health and economics in the industrialized nations. Rotator cuff is the most frequently injured region in the shoulder complex. Overhead work is considered as one of the most predominant causes of rotator cuff injuries. The workers in construction, automotive, and aerospace industries are routinely exposed to overhead exertions. Elimination of overhead work is nearly impossible due to various task and technology constraints. Therefore, appropriate intervention strategies based on the engineering and administrative controls opt to be used to prevent the hazardous impact of overhead exertions. The objective of …

Performance Study Of Five Different Cabin Air Filters In The Laboratory And On-Road Drive, Fahad Alqahtani

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the aims of installing ventilation filters in a car is to prevent vehicle occupants from inhaling potentially harmful aerosols emanating from the environment. Vehicle cabin filters are essential in ensuring that a vehicle's air conditioning system provides clean air to its occupants. The purpose of the cabin filter is to improve air quality inside the car to provide better comfort and better protect occupants from experiencing unwanted respiratory problems. Using cabin filters in air conditioning systems is a common practice in modern vehicle manufacturing. Scientists and engineers are continually seeking new ways of improving the efficiency and effectiveness …

Green Completion As A Mitigation For Btex Exposure In Gas Flaring: Nigeria Case Study (Exposure Assessment And Cost Model), Akintunde S. Akinyemi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Gas flaring is an essential part of the oil and gas industry safety and waste management procedures; however, it presents a potential exposure to BTEX compounds, a group of Non-Methane Volatile Organic Compounds (NMVOC), within up to a 10-mile radius of the flare point. The physical and the psychological cost of the journey to work, make employees live close to the workplace. This study examined the perceived exposure of oil and gas industry workers to possible carcinogenic emissions outside the workplace. It looked at the outcomes of the exposure to BTEX through gas flaring drawing on archival data and using …

Adherence To A Home Exercise Programme Following A Clinical Programme For Non-Acute Non-Specific Low Back Pain: An Exploratory Study, Judith L'Heureux, Marie-France Coutu, Djamal Berbiche, Christian Larivière

Études primaires

Purpose:Lack of adherence to home exercise programmes is hypothesised to partially explain the modest clinical effects seen in patients with low back pain. This study explored the association between the main biopsychosocial factors and adherence using a theory-driven approach including the fear-avoidance model, the common-sense model and the working alliance concept.

Methods: A repeated measures design was used. During and after an eight-week clinical exercise programme, 48 participants with non-acute and disabling low back pain followed a home exercise programme. Questionnaires assessed home exercise adherence and biopsychosocial factors at baseline, after the eight-week clinical programme and at the six-month follow-up. …

Comparative Performance Of The Nanoscan And The Classic Smps In Determining N95 Filtering Facepiece Efficiency Against Nanoparticles, Clothilde Brochot, Fariborz Haghighat, Ali Bahloul

Études primaires

Nanoparticles are defined as particles with at least one dimension in the range of 1–100 nm. Due to the special properties of nanoparticles, they are used in many workplaces, thus leading to occupational exposure. Filtering facepieces (FFPs) are generally used in these workplaces to reduce the exposure. Many studies have measured FFP efficiency in laboratories using a scanning mobility particle sizer (SMPS). The aim of this study was to determine whether a NanoScan could be used to measure FFP efficiency against nanoparticles in workplaces for one type of N95 FFP. The results showed that the NanoScan gave maximum penetration and …

On Site Comparison Of The Osha 42, Asset Ez4-Nco, Iso-Chek, Dan And Cip10 Methods For Measuring Toluene Diisocyanate (Tdi) At A Polyurethane Foam Factory, Simon Aubin, El Mekki Hamdi, Audrey Joly, Philippe Sarazin, Jacques Lesage, Livain Breau, Mark Spence, Sébastien Gagné

Études primaires

Because of the semi-volatile nature of diisocyanates (being airborne in both physical vapor and particulate phases), their high reactivity and low occupational exposure limits, diisocyanate exposure evaluation has been challenging for industrial hygienists and laboratories. The objective of this study was to compare the toluene diisocyanate (2,4 and 2,6 isomers, TDI) concentration measured by five methods in a flexible polyurethane foam factory using different collection or derivatization approaches. The methods used were: OSHA 42 modified (filter, 1-(2-pyridyl)piperazine) (OSHA), Asset EZ4-NCO (denuder and filter, dibutylamine) (Asset), Iso-Chek (double-filter, 9-(N-methylaminomethyl) anthracene and 1,2-methoxyphenylpiperazine), DAN (filter, 1,8-diaminonaphthalene), and CIP10 (centrifugation, 1,2-methoxyphenylpiperazine). Particle real-time …

On-Site Comparison Of The Osha 47, Asset Ez4-Nco, Iso-Chek, Dan, And Cip10 Methods For Measuring Methylene Diphenyl Diisocyanate (Mdi) At An Oriented-Strand Board (Osb) Factory, Simon Aubin, El Mekki Hamdi, Audrey Joly, Philippe Sarazin, Jacques Lesage, Livain Breau, Mark Spence, Sébastien Gagné

Études primaires

Diisocyanates are occupational contaminants and known sensitizers causing irritation (skin and respiratory tract) as well as occupational asthma. Because of their physicochemical properties (semi-volatile and high reactivity) and low occupational limits, diisocyanate exposure evaluation is still a challenge nowadays for industrial hygienists and laboratories. The objective of this study was to compare the methylene diphenyl diisocyanate (MDI) concentrations measured by five methods using different collection or derivatization approaches in an oriented-strand board (OSB) factory. The methods used were: OSHA 47 (filter, 1-(2-pyridyl)piperazine) (OSHA), Asset EZ4-NCO (denuder and filter, dibutylamine) (Asset), Iso-Chek (double-filter, 9-(N-methylaminomethyl) anthracene and 1,2-methoxyphenylpiperazine), DAN (filter, 1,8-diaminonaphthalene), and …

Qualitative Knowledge Of Filtering Facepiece Respirators For Filtration Performance Tests During The Covid-19 Pandemic, Clothilde Brochot, Mohamed Nejib Saidi, Ali Bahloul

Études primaires

Background: During the COVID-19 pandemic, the pressure on health centers to obtain certified N95 filtering facepiece respirators (N95 FFRs) and the pressure on the FFRs production sector led to a diversification of FFRs’ supply chains, with the approval of several government authorities.

Objective: The main issue then becomes whether these purchased FFRs are as effective as the FFRs commonly used in the pre-COVID-19 period.

Methods: The most efficient way is to test these FFRs under normative conditions. The setup used here allows to measure the pressure drop Δp (mbar) and the filtration efficiency E (%) of FFRs with a constant …

Structural Remodelling Of The Lumbar Multifidus, Thoracolumbar Fascia And Lateral Abdominal Wall Perimuscular Connective Tissues: A Cross-Sectional And Comparative Ultrasound Study, Christian Larivière, Richard Preuss, Dany H. Gagnon, Hakim Mecheri, Sharon M. Henry

Études primaires

Introduction

With low back pain (LBP), remodelling of the lumbar soft tissues involves both trunk muscles and neighbouring passive connective tissues. The aim of the present study was to compare three quantitative measures of these tissues, using ultrasound imaging (USI), among healthy controls and individuals with LBP.

Methods

USI measures from 30 healthy subjects and 34 patients with non-acute LBP were compared between groups and sexes. The measures employed were (1) lumbar multifidus echogenicity (fatty/fibrosis infiltration) at three vertebral levels; (2) posterior layer thickness of the thoracolumbar fascia, and (3) thickness of the perimuscular tissues surrounding the external oblique, internal …

Three-Month Efficacy Of Three Knee Braces In The Treatment Of Medial Knee Osteoarthritis In A Randomized Crossover Trial, Xavier Robert-Lachaine, Yoann Dessery, Étienne L. Belzile, Sylvie Turmel, Philippe Corbeil

Études primaires

Immediate biomechanical and functional effects of knee braces are often reported, however, the duration and type of knee brace treatment for knee osteoarthritis (KOA) remain unclear. The objective was to evaluate usage, comfort, pain, and knee adduction moment (KAM) of three knee braces each worn 3 months by patients. Twenty-four patients with KOA were assigned in a randomized crossover trial a valgus three-point bending system brace (V3P-brace), an unloader brace with valgus and external rotation functions (VER-brace) and a stabilizing brace used after ligament injuries (ACL-brace). Functional questionnaires and gait assessment were carried out before and after each brace wear …

Validation Of A Low-Cost Inertial Motion Capture System For Whole-Body Motion Analysis, X. Robert-Lachaine, H. Mecheri, A. Muller, C. Larue, A. Plamondon

Études primaires

While some low-cost inertial motion capture (IMC) systems are now commercially available, generally, they have not been evaluated against gold standard optical motion capture (OMC). The objective was to validate the low-cost Neuron IMC system with OMC. Whole-body kinematics were recorded on five healthy subjects during manual handling of boxes for about 32 min while wearing 17 magnetic and inertial measurement units with Optotrak clusters serving as a reference. The kinematical model was calibrated anatomically for OMC and with poses for IMC. Local coordinate systems were aligned with angular velocities to dissociate differences due to technology or kinematical model. Descriptive …

Occupational Burnout Among Healthcare Professionals In Obstetrics And Gynecology Department Of A Public Hospital In Islamabad, Pakistan, Kashif Sabin

Student Works (2020-2029)

The general purpose of this study was to investigate the extent of burnout experienced by healthcare professionals working in obstetrics & gynaecology units in public hospital of Islamabad, Pakistan. Specifically, this research attempted to explore the contributing factors of burnout, by correlating the burnout scores of exhaustion and disengagement, with the sociodemographic variables. The main objectives of the study were: (i) to assess the levels of burnout as determined by the extent of exhaustion and disengagement among the study participants, and (ii) to compare the mean scores of exhaustion and disengagement among healthcare professionals based on different demographic characteristics: (a) …

Feasibility Of Quantifying The Physical Exposure Of Materials Handlers In The Workplace With Magnetic And Inertial Measurement Units, Xavier Robert-Lachaine, Christian Larue, Denys Denis, Alain Delisle, Hakim Mecheri, Philippe Corbeil, André Plamondon

Études primaires

Handling tasks can expose workers to risk factors. The objective was to describe the feasibility of using magnetic and inertial measurement units (MIMUs) to quantify the physical exposure of materials handlers in the workplace. Full-body kinematics were obtained with MIMUs on 10 handlers gathering products ordered by retailers with a pallet truck. An observer classified the visual difference (VD) of segment orientation between a MIMUs avatar and video recordings in three categories (none, minor and major) for each product transfer. The feet, arms, shoulders and head were considered similar for ≥97% of observations. The trunk segment obtained the most differences …