Occupational Health and Industrial Hygiene Commons^™

Les Lésions Professionnelles De La Coiffe Des Rotateurs De L'Épaule : Optimiser La Prise En Charge Des Travailleurs Et Favoriser Le Retour Au Travail, François Desmeules, Jean-Sébastien Roy, Joseph-Omer Dyer, Pierre Frémont, Clermont Dionne, Joy C. Macdermid, Michel Tousignant, Annie Rochette

Rapports de recherche scientifique

Les atteintes musculosquelettiques de l’épaule sont fréquentes chez les travailleurs. En plus d’affecter leur qualité de vie, elles entraînent une augmentation de l’absentéisme et une diminution de la productivité, et peuvent conduire à une retraite anticipée. Pour l’année 2017, la province de Québec a enregistré 2,1 milliards de dollars en prestations en lien avec des lésions professionnelles. Environ 8 % de ces réclamations étaient dues à une lésion touchant l’articulation de l’épaule (CNESST, 2018).

Les lésions de la coiffe des rotateurs (CR) sont les affections les plus rencontrées chez les travailleurs présentant une atteinte à l’épaule. Présentement, les cliniciens ne …

Les Lésions Professionnelles De La Coiffe Des Rotateurs De L'Épaule : Optimiser La Prise En Charge Des Travailleurs Et Favoriser Le Retour Au Travail : Matériel Supplémentaire, François Desmeules, Jean-Sébastien Roy, Joseph-Omer Dyer, Pierre Frémont, Clermont Dionne, Joy C. Macdermid, Michel Tousignant, Annie Rochette

Rapports de recherche scientifique

Voir également :

• Les lésions professionnelles de la coiffe des rotateurs de l'épaule : optimiser la prise en charge et en favoriser le retour au travail, RA-1119-fr

• Les lésions professionnelles de la coiffe des rotateurs de l’épaule : optimiser la prise charge et en favoriser le retour au travail : guide de pratique clinique, RG-1119-fr

Développement, Validation Et Application D’Une Méthode Quantitative Pour Évaluer Les Déplacements Des Pieds Des Manutentionnaires, André Plamondon, Antoine Muller, Xavier Robert-Lachaîne, Jasmin Vallée-Marcotte, Denys Denis, Christian Larue, Hakim Mecheri, Philippe Corbeil

Rapports de recherche scientifique

Les troubles musculosquelettiques lors d’activités de manutention manuelle (MM) sont encore très présents dans nos milieux de travail. Les facteurs de risque biomécanique les plus souvent associés aux douleurs au dos incluent la manutention manuelle, les répétitions excessives, les torsions du tronc et les levers de charges lourdes. Plusieurs déterminants d’une tâche de MM ont été étudiés pour déterminer leur importance sur l'exposition physique des travailleurs. Par exemple, la hauteur de la charge, la distance initiale de la charge par rapport au corps, la masse soulevée et la vitesse du soulèvement sont tous des déterminants liés à la …

Confort Thermique Et Mobilité Des Policiers Motards Lors Du Port Du Gilet Pare-Balles : Une Analyse Ergonomique, Steve Vezeau, Alain S. Comtois, Victoria Budico

Rapports de recherche scientifique

Plusieurs études démontrent une diminution importante des risques de décès chez les agents de police qui portent un gilet pare-balles (GPB). Cependant, certains patrouilleurs demeurent réticents à le revêtir à cause des inconforts qu’il engendre sur les plans thermiques et de la mobilité; ceux-ci représentent 8 % de l’ensemble des agents de police et 47 % des agents motards, ce qui accroît les risques pour leur sécurité. Les agents des unités motocyclistes seraient donc parmi les plus exposés, notamment en raison de conditions particulières telles que le travail à l’extérieur, la proximité d’une source de chaleur (moteur), le port de …

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

Safety In The Quebec Construction Industry: An Overview Of And Possible Improvements In Hazardous Energy Control Using Lockout On Construction Sites By Electricians, Pipefitters, Refrigeration Mechanics And Construction Millwrights, Damien Burlet-Vienney, Yuvin Chinniah, Ayoub Nokra, Abdallah Ben Mosbah

Études primaires

Lack of proper energy control on construction sites leads to numerous worker fatalities every year. Energy control refers to the concept of lockout and other methods used in particular in North America. The aim of this exploratory research project was to achieve a better understanding of energy control practices in the Quebec construction industry for four trades: electricians, pipefitters, refrigeration mechanics and construction millwrights. For each trade, 10 or so semistructured interviews were conducted by means of an open-ended questionnaire, developed with reference to the current provincial regulatory requirements. The 95 experiences described by the 38 participants were compiled by …

Critères De Stabilité Des Échelles Et Des Escabeaux, Bertrand Galy

Rapports de recherche scientifique

Les chutes de hauteur sont encore aujourd’hui une des principales causes d’accident au Québec, et la deuxième cause en termes de coûts sur la période 2010 – 2012, avec une moyenne de 397 millions de dollars par année. Selon la CNESST, les statistiques de lésions impliquant les échelles, que ce soit en construction ou en établissement, montrent une augmentation au fil des ans (période de 2007 à 2012) et sur la période 2009 à 2013, 20 % des lésions dues à une chute de hauteur ont été causées par une chute à partir d’une échelle.

Un des principaux critères affectant …

Trainer Appropriation And Transfer Of A New Prevention Approach In Material Handling Based On Action Principles, Denys Denis, Maud Gonella, Marie Comeau, Martin Lauzier

Rapports de recherche scientifique

Mise en contexte et objectif

Prenant acte du constat d’échec des formations à la manutention axées sur l’enseignement exclusif de la technique sécuritaire « dos droit – genoux fléchis », une nouvelle approche d’intervention dite « stratégie intégrée de prévention en manutention » (SIPM) a été proposée en 2011. Son originalité repose, entre autres, sur l’utilisation de neuf principes d’action permettant de comprendre et de commenter la richesse des techniques de manutention utilisées naturellement par les manutentionnaires dans leur milieu de travail. L’étude a pour objectif central d’évaluer l’appropriation et le transfert de la SIPM par un groupe d’intervenants formés …

Survey Of Airflow Around A Heated Manikin As A Simulated Aeromedical Evacuation Patient On A Litter With Computational Fluid Dynamics Models, George P. Lemmer

Theses and Dissertations

Aeromedical Evacuations remain the predominant method used to transport patients from forward deployed areas of operations to secure locations with more robust medical infrastructure. Transportation of chemical warfare casualties and infectious patients require additional attention to prevent cross contamination. Specific airflow characteristics paired with environmental control system settings are a gap in scholarly literature. Based on the available literature computational fluid dynamics models were created to simulate the airflow around a patient represented by human geometry using commercially available software. In order to compare simulated and experimental results a heated manikin was placed in the MURPHEE aerosol exposure chamber and …

Développement D’Outils Pour L’Évaluation Du Processus D’Implantation Et L’Analyse Économique D’Une Intervention Ergonomique : Le Cas D’Une Intervention De Prévention Des Troubles Musculosquelettiques Dans L’Industrie De L’Abattage Et De La Transformation De La Volaille, Émilie Desjardins, Hélène Sultan-Taïeb, France St-Hilaire, Nicole Vézina, Élise Ledoux, Patricia Bélanger, Rita Naji

Rapports de recherche scientifique

Depuis les années 1990, Nicole Vézina et son équipe ont réalisé des travaux de recherche qui ciblent l’apprentissage de l’affilage et de l’aiguisage des couteaux dans un objectif de prévention des troubles musculosquelettiques (TMS). Le cas à l’étude est une intervention implantée dans le département d’éviscération d’une usine d’abattage et de transformation de la volaille située au Québec. Il s’agit d’une intervention ergonomique de prévention des TMS avec plusieurs types de transfert d’apprentissage dans un contexte de travail à la chaîne à cadence élevée. L’objectif général de cette étude était de développer des outils de collecte de données adaptés aux …

Effet De L’Expertise Et Du Sexe Sur Les Contraintes À L’Épaule En Manutention, Etienne Goubault, Romain Martinez, Najoua Assila, Jennifer Dowling-Medley, Élodie Monga-Dubreuil, Sophie-Anne Scherrer, André Plamondon, Mickaël Begon

Rapports de recherche scientifique

L’atteinte de troubles musculosquelettiques (TMS) parmi les travailleurs et travailleuses au Québec était récemment estimée à 732 000 cas (Stock et al., 2014). Ces TMS sont associés aux activités professionnelles impliquant des efforts physiques prolongés, intenses et/ou répétitifs, telles que des tâches d’assemblage, de manutention, d’aide à la personne ou encore de maintien de posture prolongée sur un poste de travail. Les membres supérieurs, qui représentaient 30,1 % des cas de TMS déclarés et acceptés au Québec de 1998 à 2007 (Michel et al., 2010), sont les plus touchés après le dos. Plus particulièrement, l’épaule figure comme l’articulation …

Evaluation Of Control Strategies For Overhead Work Using Electromyography Of Rotator Cuff Muscles, Hossein Motabar

Graduate Theses, Dissertations, and Problem Reports (ETD)

Work-related musculoskeletal disorders (MSDs) of shoulder have a significant impact on overall health and economics in the industrialized nations. Rotator cuff is the most frequently injured region in the shoulder complex. Overhead work is considered as one of the most predominant causes of rotator cuff injuries. The workers in construction, automotive, and aerospace industries are routinely exposed to overhead exertions. Elimination of overhead work is nearly impossible due to various task and technology constraints. Therefore, appropriate intervention strategies based on the engineering and administrative controls opt to be used to prevent the hazardous impact of overhead exertions. The objective of …

Performance Study Of Five Different Cabin Air Filters In The Laboratory And On-Road Drive, Fahad Alqahtani

Graduate Theses, Dissertations, and Problem Reports (ETD)

One of the aims of installing ventilation filters in a car is to prevent vehicle occupants from inhaling potentially harmful aerosols emanating from the environment. Vehicle cabin filters are essential in ensuring that a vehicle's air conditioning system provides clean air to its occupants. The purpose of the cabin filter is to improve air quality inside the car to provide better comfort and better protect occupants from experiencing unwanted respiratory problems. Using cabin filters in air conditioning systems is a common practice in modern vehicle manufacturing. Scientists and engineers are continually seeking new ways of improving the efficiency and effectiveness …

Étude Exploratoire Sur Les Pratiques Des Fabricants De Machines Au Québec En Lien Avec L’Intégration De La Sécurité Des Machines Dès Leur Conception, Yuvin Chinniah, François Gauthier, George Abdul-Nour, Sabrina Jocelyn, Barthélemy Aucourt, Guy Bordeleau

Rapports de recherche scientifique

Le présent rapport est destiné principalement à tout organisme québécois œuvrant en matière de prévention des lésions professionnelles (ex. : la Commission des normes, de l’équité, de la santé et de la sécurité du travail (CNESST), les associations sectorielles paritaires (ASP)), pour un ou plusieurs secteurs industriels donnés. Il porte sur une étude exploratoire concernant l’intégration de la sécurité dès la conception des machines et qui a été réalisée auprès de fabricants. Ce rapport intéressera également les concepteurs et fabricants désireux de se renseigner sur la manière dont la sécurité est prise en compte dans la mise en œuvre de …

Performance Study Of An Unconventional Breathresponse Papr Against A N95 Ffr And Conventional Paprs, Huihui Yang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Healthcare workers (HCWs) are the first responders when infectious pathogens occur. Powered air-purifying respirators (PAPRs) are one of the most widely used personal protective equipment for healthcare workers. Currently, few studies have been performed with HCWs in the actual healthcare work environments to assess discomforts, acceptance and protective efficiency towards wearing and use of PAPRs. The main purpose of this dissertation was to introduce and assess a brand new unconventional PAPR (Koken breath-response PAPR). The protection performance and user preferance of this unconventional PAPR were studided and compared to that of a N95 FFR and traditional PAPRs.

Firstly, a laboratory …

Analysis Of User Preference With N95 And Powered Air-Purifying Respirators In A Healthcare Work Environment, Brittany Renee Carver

Graduate Theses, Dissertations, and Problem Reports (ETD)

For those working in the healthcare field, personal protective equipment is vital. Healthcare workers are often first responders when it comes to dealing with patients who are infected or when a disease outbreak occurs. The Occupational Safety and Health Administration (OSHA) requires all healthcare operations to provide employee protection against blood borne pathogens. With the increase of life-threatening disease outbreaks, such as SARS in 2003 and Ebola in 2014, it is of the upmost importance to make sure respirators are best suited for users and acceptable for long term use. It has been shown through previous studies that due to …

Assessment Of Ergonomics In Indian Dental Practice: A Workplace Analysis, Divya Gadde

Masters Theses & Specialist Projects

Dental practice requires unique working conditions such as prolonged working hours, strained body postures and laborious, high finesse dental techniques. However, it can be more efficiently performed by the application of ergonomics, rather than physically forcing the worker's body to fit the job. Posture is highly influenced by factors such as inadequate working level, incorrect patient positioning, and poor visual comfort. In order to eliminate musculoskeletal disorders it is necessary to control these and other factors, and design the human work environment to be more ergonomic. The aim of this study was to assess ergonomics within Indian dental practice and …

Effects Of Motion Segment Simulation And Joint Positioning On Spinal Loads In Trunk Musculoskeletal Models, F. Ghezelbash, A. H. Eskandari, A. Shirazi-Adl, N. Arjmand, Z. El Ouaaid, A. Plamondon

Études primaires

Musculoskeletal models represent spinal motion segments by spherical joints/beams with linear/nonlinear properties placed at various locations. We investigated the fidelity of these simplified models (i.e., spherical joints with/without rotational springs and beams considering nonlinear/linear properties) in predicting kinematics of the ligamentous spine in comparison with a detailed finite element (FE) model while considering various anterior-posterior joint placements. Using the simplified models with different joint offsets in a subject-specific musculoskeletal model, we computed local spinal forces during forward flexion and compared results with intradiscal pressure measurements. In comparison to the detailed FE model, linearized beam and spherical joint models failed to …

The Effect Of Magnification Loupes On Dental Hygienists' Posture While Exploring, Emily Ludwig, Gayle B. Mccombs, Susan L. Tolle, Daniel M. Russell

Dental Hygiene Faculty Publications

Purpose: The purpose of this study was to determine the effects of dental magnification loupes on posture during instrumentation.

Methods: A convenience sample of 27 right-handed dental hygienists, with no prior history of injuries or disabilities of the head, neck, or trunk region, enrolled in the study. Baseline posture calibration was taken and tri-axial accelerometers were placed on four locations of the head and trunk (occipital region of head; cervical vertebrae C5; thoracic vertebrae T5; lumbar vertebrae L1) to measure acceleration and the orientation of the body to gravity. Participants were randomly assigned to wear self-supplied magnification loupes during either …

Accuracy And Repeatability Of Single-Pose Calibration Of Inertial Measurement Units For Whole-Body Motion Analysis, Xavier Robert-Lachaine, Hakim Mecheri, Christian Larue, André Plamondon

Études primaires

Portable inertial measurement units (IMUs) are suitable for motion analysis outside the laboratory. However, IMUs depend on the calibration of each body segment to measure human movement. Different calibration approaches have been developed for simplicity of use or similarity to laboratory motion analysis, but they have not been extensively examined. The main objective of the study was to determine the accuracy and repeatability of two common single-pose calibrations (N-pose and T-pose) under different conditions of placement (self-placement and passive placement), as well as their similarity to laboratory analysis based on anatomical landmarks. A further aim of the study was to …

Difference Between Male And Female Workers Lifting The Same Relative Load When Palletizing Boxes, André Plamondon, Christian Larivière, Denys Denis, Hakim Mecheri, Iuliana Nastasia

Études primaires

A few biomechanical studies have contrasted the work techniques of female and male workers during manual material handling (MMH). A recent study showed that female workers differed from males mostly in the strategy they used to lift 15-kg boxes from the ground, especially regarding task duration, knee and back postures and interjoint coordination. However, the lifting technique difference observed in females compared to males was perhaps due to a strength differences. The objective of this study was to test whether female workers would repeat the same lifting technique with a load adjusted to their overall strength (females: 10 kg; males: …

Effect Of Local Magnetic Field Disturbances On Inertial Measurement Units Accuracy, Xavier Robert-Lachaine, Hakim Mecheri, Christian Larue, André Plamondon

Études primaires

Inertial measurement units (IMUs), a practical motion analysis technology for field acquisition, have magnetometers to improve segment orientation estimation. However, sensitivity to magnetic disturbances can affect their accuracy. The objective of this study was to determine the joint angles accuracy of IMUs under different timing of magnetic disturbances of various durations and to evaluate a few correction methods. Kinematics from 12 individuals were obtained simultaneously with an Xsens system where an Optotrak cluster acting as the reference system was affixed to each IMU. A handling task was executed under normal laboratory conditions and imposed magnetic disturbances. Joint angle RMSE was …

A Biomechanical Comparison Between Expert And Novice Manual Materials Handlers Using A Multi-Joint Emg-Assisted Optimization Musculoskeletal Model Of The Lumbar Spine, Denis Gagnon, André Plamondon, Christian Larivière

Études primaires

Expertise is a key factor modulating the risk of low back disorders (LBD). Through years of practice in the workplace, the typical expert acquires high level specific skills and maintains a clean record of work-related injuries. Ergonomic observations of manual materials handling (MMH) tasks show that expert techniques differ from those of novices, leading to the idea that expert techniques are safer. Biomechanical studies of MMH tasks performed by experts/novices report mixed results for kinematic/kinetic variables, evoking potential internal effect of expertise. In the context of series of box transfers simulated by actual workers, detailed internal loads predicted by a …

Subject-Specific Biomechanics Of Trunk: Musculoskeletal Scaling, Internal Loads And Intradiscal Pressure Estimation, F. Ghezelbash, A. Shirazi-Adl, N. Arjmand, Z. El-Ouaaid, A. Plamondon

Études primaires

Development of a subject-specific computational musculoskeletal trunk model (accounting for age, sex, body weight and body height), estimation of muscle forces and internal loads as well as subsequent validation by comparison with measured intradiscal pressure in various lifting tasks are novel, important and challenging. The objective of the present study is twofold. First, it aims to update and personalize the passive and active structures in an existing musculoskeletal kinematics-driven finite element model. The scaling scheme used an existing imaging database and biomechanical principles to adjust muscle geometries/cross-sectional-areas and passive joint geometry/properties in accordance with subjects’ sex, age, body weight and …

Injury Prevention With Physical Therapy, Karen Kott, Margaret F. Lemaster

Rehabilitation Sciences Faculty Publications

(First paragraph) Ergonomics is the study of human performance (positioning and movement) and workplace design, such as equipment, ambience, and placement. The purpose of ergonomics is to maximize productivity by increasing safety, improving work quality, reducing operator fatigue and discomfort, and decreasing the risk of work -related musculoskeletal disorders (MSDs).^1-3

Adequate Ventilation: How Is It Defined And Does It Adequately Warn Consumers?, Christopher Blankenship

Theses, Dissertations and Capstones

The purpose of this research was to clarify and define the term “adequate ventilation.” Upon looking at regulations, court cases, and other elements, it is clear that the term is inadequate to inform consumers and does not instruct consumers on how to achieve proper ventilation. To find out if consumers understand this, random persons were asked to define it. The answers were given a numerical value to show the knowledge trend. The outcome showed that most people do not understand how to achieve proper ventilation. Conclusion: Diagrams showing how to set up a room with ventilation and new instructions are …

Assessment Of Neck And Shoulder Muscle Coactivations And The Effect On The Musculoskeletal System, Regina Derria Pope-Ford

Dissertations

Musculoskeletal disorders (MSDs) constitute one of the most important occupational health issues in healthcare workers who are susceptible to upper extremity disorders. Yet MSDs in the healthcare professions have not been studied extensively beyond the lower back. The focus population for this research is the field of dentistry where neck and shoulder disorders have been documented to have a high prevalence. Though quantitative data has been collected, many prior studies have focused on self-reported information. The goal of this research is to provide insight into the inter-relationship of muscles in the upper extremities. One way to accomplish this is to …

Apparent Total Evaporative Resistance Values From Human Trials Over A Range Of Metabolic And Heat Stress Levels, Matthew David Dooris

USF Tampa Graduate Theses and Dissertations

Failure to maintain thermal equilibrium can cause uncontrollable increases in body core temperature beyond critical upper limits. In selecting clothing, consideration must be given to the heat transfer properties of clothing that may restrict the cooling capacity of the human body under heat stress conditions, most importantly, apparent total evaporative resistance (R_e,T,_a). This study calculated and compared R_e,T,_a for five clothing ensembles under varying heat stress conditions, including three relative humidity (RH) levels and three stages of heat stress to determine if R_e,T,_a values varied or remained the same with …

Hazard Identification, Risk Assessment And Risk Control (Hirarc) In A Corrugated Box Manufacturer., Fraziel Barahim

Student Works (2010-2019)

Packaging is one of the biggest industries in the world. It involves paper, glass,metal, flexible and plastic. The corrugated paper packaging worldwide has been growing at 3% to 4% per annum. In line with the expansion of the corrugated paper packaging manufacturing, the potential hazards to human physical and health, property and the environment posed by its operations and production activities have created an increase in awareness and brought up safety issues amongst industry, government and public. The hazard identification and risk assessment plays a role in a number of areas in the safety management, including regulatory policies and guidelines, …

Manual Handling Workload And Musculoskeletal Discomfort Among Warehouse Personnel, Terrance N. Knox

Walden Dissertations and Doctoral Studies

Work-related musculoskeletal disorders (WRMSD), specifically physical and muscular discomfort in the upper arm, lower arm, thigh, lower leg, wrist, shoulders, back, or neck, are among the most frequently reported workplace injuries in the United States. The dearth of knowledge about the types of workloads that may contribute to the development of WRMSD was the impetus of this research. The study aimed to identify antecedents of WRMSD among warehouse workers in order to reduce WRMSDs and increase productivity as expressed in a systems perspective on industrial health. The research questions examined the prevalence of specific WRMSDs, the relationship of high-risk tasks …