Nanotechnology Commons^™

Securing Body Area Networks With Fingerprint Cryptography And Authentication In Manet, Alaa M. Elbanaa, Roayat Ismail Abdelfatah, Mohamed E. Nasr

Journal of Engineering Research

Standard MANETs face issues like incorrect transmission and vulnerability to unauthorized node access, posing significant security concerns, especially regarding authentication procedures. To address these challenges, researchers are exploring innovative approaches to enhance authentication mechanisms within MANETs. In this paper, we present a novel solution integrating a Body Area Network (BAN) scheme to capture biomedical data from sensors such as ECG and EEG, facilitating data transmission across MANETs. Furthermore, we employ a hybrid Elgamal algorithm for encrypting biomedical data, bolstered by fingerprint biometrics to fortify the cryptographic process, enhancing network security. Additionally, we conduct comparative analyses, exploring different key sizes and …

A Technical Survey On The Impact Of Exhaust Gas Recirculation And Multifuel Blends On Diesel Engine Performance And Emission Characteristics, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mustafa Mohamed Ouda Eng.

Journal of Engineering Research

The increasing demand for fossil fuels poses significant challenges as their reserves gradually deplete over time. Biodiesel is considered one of the most effective alternative fuels to mitigate these issues. Current research focuses on comparing engine performance parameters when blending biodiesel with fossil fuels in Compression Ignition (C.I.) engines. The study demonstrates a comparison of the exhaust emissions produced by biodiesel fuel. In comparison to diesel, biodiesel generally exhibits lower heating value, higher density, increased fuel consumption, and elevated nitrogen oxide levels. To address these challenges, various additives are mixed and blended with biodiesel to meet international fuel standards. These …

Heat And Mass Transfer Characteristics During Vacuum Drying Of Wood, Mohamed Salah Elmetwaly, Lotfy Hassan Rabie Saker, Mohamed Sameh Salem

Journal of Engineering Research

The properties affecting the characteristics of heat and mass transfer during vacuum drying of wood are studied in this paper. The experimental work is carried out in 0.0365 m³ test rig vacuum dryer. The drying chamber dimensions are 0.5 m long and 0.305 m diameter carbon steel cylinder. This drying chamber is internally coated with epoxy paint, also this chamber is detachable closing caps at both ends meaning welded at one end and bolted at the other end to facilitate loading and unloading of the specimen. Two stainless steel heat exchanger plates with dimensions 0.3 m length, 0.15 m …

Prediction Of Noise From A Construction Site, Amira Mostafa Ibrahim Miss, Nashwa Mohamed Yossef Prof, Adel Ibrahim Eldosouky Emeritus Professor

Journal of Engineering Research

Construction activities significantly contribute to environmental noise pollution, affecting workers' health and the surrounding community, posing significant challenges to human well-being and productivity. This paper presents a prediction method and a modelling technique used to assess construction site noise. Various factors influencing noise generation and propagation, such as equipment types, operational conditions, site characteristics, and environmental factors, are discussed. This paper explores the application of Monte Carlo technique as an effective method for predicting construction site noise and planning noise mitigation strategies.

Numerical Investigation Of Liquefaction Mitigation In-Sandy Soils Under Earthquake Loading Using Vertical Gravel Drains., Marawan M. Shahien M. Shahein, Ahmed Nasr, Baher Mohamed Abd El Fattah

Journal of Engineering Research

Liquefaction is one of the most dramatic defects of granular soil. This phenomenon is mostly observed when loose sand is subjected to a dynamic load or earthquake. In this study, the liquefaction that affected the loose soil evaluated, and some recommendations are introduced. (2-D) Numerical analysis using Plaxis (8.2) was conducted to simulate the behavior of the loose soil under dynamic loads. The studied model was carried out on multi-layers soil supported by stone columns subjected to dynamic loads. It was found that stone columns enhanced the soil behavior and reduced the damage that occurred. Liquefaction of the loose soil …

Chemical Kinetic Investigation: Exploring The Impact Of Various Concentrations Of Hho Gas With A 40% Biodiesel/Diesel Blend On Hcci Combustion, Mai H. Aboubakr, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ayman Refat Abd Elbar

Journal of Engineering Research

This study uses the Chemkin software program to evaluate the effect of different quantities of oxyhydrogen gas [HHO] added to 40% biodiesel and diesel mix [B40], including B40, B40+5HHO, B40+10HHO, and B40+15HHO, on the HCCI combustion process's efficiency. The information collected includes cylinder pressure, cylinder temperature, accumulated gas phase heat release, heat loss rate, UHC, and mole fractions of O2, CO, CO2, diesel [NC7H16], biodiesel [C5H10O2], and oxyhydrogen [H2O]. The finding is that, when compared to a blend of biodiesel and diesel, using oxyhydrogen in the biodiesel/diesel mix boosts the properties of the HCCI engine.

Exploring The Influence Of Various Factors, Including Initial Temperatures, Equivalence Ratios, And Different Biodiesel/Diesel Blend Ratios, On Homogeneous Charge Compression Ignition (Hcci) Combustion, Mai H. Aboubakr, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ayman Refat Abd Elbar

Journal of Engineering Research

This paper discusses the impact of three study cases that change with different values: the first case is four initial temperature values [313, 323, 333, and 343 K], the second case is three equivalence ratios [0.2, 0.3, and 0.4], and the third case uses various concentrations of biodiesel and diesel mixes [D100, B20, B40, B60, B80, and B100]. The purpose is to use the Chemkin software program to determine the effectiveness of each case in the HCCI combustion process. The results included cylinder pressure, cylinder temperature, accumulated gas phase heat release, heat loss rate, UHC, and mole fractions of O …

Survey And Analysis Of Safety Components And Costs In Construction Projects In Egypt, Emad E. Etman Prof., Haytham Sanad Prof., Asmaa Ibrahim Khater

Journal of Engineering Research

The difficulty of determining the factors that achieve safety on Egyptian construction sites as a result of multiple and different criteria and different relative weights of the criteria represents a challenge to achieve safety and a secure environment on construction sites. This issue has been of interest for many decades and continues to be a topic of discussion today because of construction project management is rapidly modernizing. The paper aims to identify the safety standards most commonly used on construction sites, and determine their relative weights as seen by the target audience and also estimate the cost of safety measures …

Enhancing Decision In Information System Through Weighted Preliminary Pretopology Analysis, Mustafa Elsayed, Rifet Agassi

Journal of Engineering Research

It is clear from adequate study of the past decades that there has been rapid growth in the information system, which relies mainly on programming systems. This has led to the necessity of dealing with high efficiency with the information system necessary for decision support. Information systems are a mixture of software and hardware to store and process all the data required and are presented in a useful form to extract information by applying topological concepts. In this paper a pretopological space from an information system is to be constructed. The computation of decision accuracy stands as a pivotal stage …

تحسين كفاءه التوازن الحرارى لمستخدمى الفراغات السكنيه, Alamera Kamal Elden Elfeky, Elamira Elfeky, Walaa Ahmed Nour, Lobna Abdallah Agha

Journal of Engineering Research

human belonging to nature Considered innate, and known as Biophilie, it has direct and strong relation with human heath and his welfare which affected by quality of internal environment where we Live and work as we spend most of our time in this environment. Biophelic design Aim to improve heath and welfare of human. natural. and reconnect him with his natural environment beside achieving the aesthetic aspect of his place.

in our present time, gap appeared in relation between human and environment as a result of modern design solution, as it has negative effect on human heath and safety, to …

Towards Environmentally Sustainable Preservation Of Heritage Buildings, Rozal Rozal Yousef Hanna1, Ayman Gamal El-Din Abd El- Tawab2, Walaa Abou El- Haggag Mehanna3

Journal of Engineering Research

The construction industry, characterized by its intricate processes and extensive stakeholder networks, stands at the cusp of a digital revolution. The adoption of blockchain-smart contract (BCSC) technology is at the heart of this transformation. This research delves deep into the BCSC within the construction arena to provide comprehensive insight into its probable applications, inherent challenges, and potential future trajectories. Leveraging the PRISMA analysis technique, a curated collection of relevant academic research articles was assembled, shedding light on the existing body of knowledge regarding the application of BCSC technology in construction. The authors developed an innovative user interface tool customized to …

Review: Protection Of Wooden Structures With Nano-Titanium Dioxide Coating, Zienab Zienab A. Ahmed1*, And M. M. Mosallem2

Journal of Engineering Research

Wood is widely used for various purposes with good performance. Wood works as the main material for furniture, monuments, decorations and constructions. which has the close relationship with human. Durability of wood is important in ensuring an appropriate life for the structure being designed. Wooden construction deteriorates easily due to UV radiation and weather conditions. Many of wood types need a preservative treatment. Several compounds are available for chemical protection, but not all are completely safe for human health. New technologies with low environmental impact and economically feasible are developed, which improves the life cycle of wood. Titanium dioxide is …

Urbanism Strategies For Linking Existing And New Cities, Naglaa J. Q. Mo’Men Abdel-Qader Ebrahim1, Mohsen Bayad2

Journal of Engineering Research

New cities, designed for urban growth outside existing metropolitan regions, face challenges in street infrastructure due to rapid expansion. Efficient control of mobility is crucial as cities grow. Sustainable transportation involves factors like infrastructure, public transit, delivery networks, affordability, efficiency, air quality, health, and reduced emissions. Commuting between established and new urban areas is common, leading to issues like urban sprawl, longer travel times, and congestion in developing countries. The challenge is to improve accessibility while addressing air quality, traffic, congestion, noise, built environment, emissions, and sprawl. This study aims to explore factors influencing mobility choices in Egypt, focusing on …

Manufacturing Of Aligned Electrospun Nanofiber Yarns For Their Enhanced Mechanical And Piezoelectric Properties, Adaugo Mary-Frances Enuka

Theses and Dissertations

Electrospinning is a widely used technique for producing nanofibers with diverse applications. This method uses polymer solutions and strong electric fields to generate nano-sized fibers with unique properties. This study presents a novel manufacturing approach that enables the production of electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofiber yarns using an automated parallel track system and an adjustable roll-to-roll collector. This research examines the impact of an automated post-drawing system on the polymer chain orientation, crystallinity, tensile strength, morphology, and piezoelectric properties of PVDF-HFP nanofiber yarn. The results reveal that the post-drawing process significantly improves molecular alignment, increases tensile strength, and enhances the …

Understanding Nanoparticle-Liver Interactions In Nanomedicine, Yuxin He, Yifan Wang, Lin Wang, Wen Jiang, Stefan Wilhelm

Faculty, Staff and Student Publications

Introduction: Understanding the interactions between administered nanoparticles and the liver is crucial for developing safe and effective nanomedicines. As the liver can sequester up to 99% of these particles due to its major phagocytic role, understanding these interactions is vital for clinical translation.

Areas covered: This review highlights recent studies on nanoparticle-liver interactions, including the influence of nanoparticle physicochemical properties on delivery, strategies to enhance delivery efficiency by modulating liver Kupffer cells, and their potential for treating certain hepatic diseases. Additionally, we discuss how aging impacts the liver's phagocytic functions.

Expert opinion: While liver accumulation can hinder nanomedicine safety and …

Generation And Characterization Of Lipid Nanoparticles For Dna Plasmid Delivery And Pharmacological Characterization, Sahana John

Biotechnology Theses

Lipid nanoparticles (LNPs) have shown promise for delivering nucleic acids like DNA plasmids, but packaging large plasmids remains challenging. The findings and experimental work detailed in this thesis are geared towards providing a proof of concept and providing preliminary confirmation of the guiding principle.

We synthesized LNPs containing cationic lipids (D-Lin-MC3) to encapsulate the large pLVX-ZsGreen and psiCHECK (luciferase) plasmids (~10-14kb) using a microfluidic system. Characterization included size, charge, morphology, plasmid encapsulation efficiency and in vitro/in vivo studies. The LNP-pDNA particles were ~100nm in size with high encapsulation efficiency. The LNPs efficiently transfected 293T cells with low cytotoxicity, enabling strong …

Functionalized Gold Nanoparticles And Halogen Bonding Interactions Involving Fentanyl And Fentanyl Derivatives, Molly M. Sherard, Jamie S. Kaplan, Jeffrey H. Simpson, Kevin W. Kittredge, Michael C. Leopold

Chemistry Faculty Publications

Fentanyl (FTN) and synthetic analogs of FTN continue to ravage populations across the globe, including in the United States where opioids are increasingly being used and abused and are causing a staggering and growing number of overdose deaths each year. This growing pandemic is worsened by the ease with which FTN can be derivatized into numerous derivatives. Understanding the chemical properties/behaviors of the FTN class of compounds is critical for developing effective chemical detection schemes using nanoparticles (NPs) to optimize important chemical interactions. Halogen bonding (XB) is an intermolecular interaction between a polarized halogen atom on a molecule and e−-rich …

Translational Pathways For Ultra Long-Acting Medicines For Chronic Disease: From Hiv To Substance Use Disorders, Suyash Sanjay Deodhar

Theses & Dissertations

Human immunodeficiency virus (HIV) and opioid use disorder (OUD) are among the top global public health challenges, with a significant overlap in the number of cases and higher mortality risks compared to the general population. Treatment and recreational opioid use lead to addictive disorders. Both conditions require repeated dosing of therapy where adherence to a strict lifelong regimen remains a major challenge. Notably, people living with HIV/AIDS (PLWHA) and struggling with opioid use disorders (OUD) show suboptimal adherence to antiretroviral drugs (ARVs). Also, the risk of transmitting HIV and other blood-borne infections through the sharing of needles and other injection …

Development Of Long-Acting Antiviral And Antimicrobial Prodrug Nanoformulations, Srijanee Das

Theses & Dissertations

Over the past decade, the global burden of infectious diseases has increased substantively, underscoring the need for more effective treatment strategies. However, the discovery and development of new drugs with desirable safety, pharmacokinetics, and efficacy is a time consuming and costly process with great uncertainty around success rate. As an alternative to new drug development, prodrugs and novel drug delivery systems have increasingly been explored. Both serve to overcome the drug development challenges. Such drug formulations that permit extended dosing intervals of potent native drugs serve multiple purposes by promoting patient adherence to in improving treatment outcomes. This is especially …

Electrochemical Modulation Of Surface Plasmon Wave To Investigate Dna-Based Sensing Platforms And Detection Of Sars-Cov2., Anil Sharma

Electronic Theses and Dissertations

This study offers a thorough comparative analysis of optical and electrical signaling strategies for assessing the electrochemical properties of different redox-labeled DNA-based biosensing platforms. In addition, it illustrates the development of an optical interrogation technique with electrochemical modulation of surface plasmon waves (ECM-SPW) as a route for analyzing and implementing DNA-based hybridization sensors. For those quantitative analyses, we chose a model sensing platform composed of a methylene blue (MB)-modified single-stranded DNA (ssDNA) signaling probe and an unlabeled capture ssDNA probe that complements the signaling probe. Two types of signaling probes were employed in this work: one with MB attached to …

Synthesis And Characterization Of Polymeric Nanoparticles To Enhance Celleullar Drug Delivery, Rahma Aly

Chemistry Theses

Medicines in the form of nanoparticles called nanomedicines, stand at the forefront of revolutionary advancements in healthcare, offering precise drug delivery and diagnostic capabilities. A recent example of nanomedicine in the clinic is the COVID-19 vaccine, which helped prevent death during the pandemic. While the potential benefits are immense, a myriad of challenges complicate their seamless integration into clinical practice. The design and fabrication of nanoparticles demand meticulous attention to biocompatibility and toxicity. Interactions with biological systems are complex, requiring a delicate balance between therapeutic efficacy and safety. The reticuloendothelial system's rapid clearance of nanoparticles, their instability in physiological environments, …

Chitosan-Based Hydrogels In Drug Delivery, Salma A. Fereig, Mona Mohamed Ahmed Abdelmottaleb

Pharmacy

Hydrogels are three-dimensional cross-linked hydrophilic polymers that are able to absorb large quantities of water and swell. They have various properties like biocompatibility, low toxicity, and mostly biodegradability, which make them attractive for drug delivery applications. Chitosan hydrogels are especially attractive due to the inherent activities of the chitosan itself like the antibacterial, anti-inflammatory, and tissue regeneration enhancement capacity. Therefore, chitosan hydrogels have been proposed for the delivery of various drugs, genes, cytokines, and stem cells via various routes of administration for the treatment of various diseases as well as different forms of degeneration.

Arsenic Contamination Needs Serious Attention: An Opinion And Global Scenario, Abhijnan Bhat School Of Food Science And Environmental Health, Kamna Ravi Health, Engineering & Materials Sciences (Hems) Hub, Furong Tian Nanolab Research Centre, Baljit Singh Micra Biodiagnostics Technology Gateway

Articles

Arsenic (As) contamination is a serious global concern, polluting our natural resources, including water and soil, and posing a danger to the environment and public health. Arsenic is present in the groundwater of several countries and this contaminated water is used for irrigation, drinking, and food preparation, which poses the greatest threat to public health. Nearly 106 countries are affected by groundwater arsenic contamination and an estimated 230 million individuals worldwide are exposed to its adverse health effects, including increased cancer risks, associated cardiovascular disease and diabetes, skin lesions, neurological effects, kidney damage, and foetal or cognitive development-related complications. Arsenic …

Building For Safety: Design Considerations For Refuge Areas In Tall Buildings From Quality Management Perspective, Enass. A. Salama, Heba. M. Gaber, Ahmed. M. Selim

Journal of Engineering Research

New El Alamein City is one of the largest urban projects in Egypt, and the largest project on the north coast. Tall buildings (super high-rise buildings) are considered the prevailing trend by architectural designers to obtain the maximum view of the Mediterranean Sea. The provision of safety evacuation in emergencies for these buildings’ occupants is a crucial challenge from the Quality management point of view. In contrast, there are no sufficient architectural design guidelines for the tall buildings provided by the Egyptian code for protecting buildings from fire, especially the design of the refuge areas. This study aims to investigate …

Effect Of Organic Compounds Additives For Biodiesel Fuel Blends On Diesel Engine Vibrations And Noise Characteristics, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mahmoud Soliman Eng.

Journal of Engineering Research

The extensive consumption of petroleum fuel directly correlates with both hazardous exhaust emissions affecting human health and contributing to global warming. Initially, biodiesel fuels were proposed as a viable alternative to address these issues. This perspective finds support in numerous published studies that highlight how the significant catalytic effect of nanoparticles allows for their integration into biodiesel blends, resulting in improved combustion characteristics, reduced exhaust emissions, and enhanced performance. This study investigates the impact of additives on biodiesel fuel properties and its effects on engine performance metrics such as brake power, brake thermal efficiency, exhaust gas concentration, engine vibration, and …

Investigation Into The Impact Of Ammonia Hydroxide On Performance And Emissions In Compression Ignition Engines Utilizing Diesel/Biodiesel Blends, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

In recent times, there has been a surge in scientific endeavors aimed at combating global warming. Various methods have been employed to address this issue, including the substitution of fossil fuels with more environmentally sustainable alternatives and the combination of different fuel types. This can be achieved through the integration of innovative injection systems and the simultaneous combustion of alternative fuels alongside fossil fuels, or by modifying fuel injection systems such as in the PCCI, RCCI, or HCCI systems. In a particular research investigation, a blend of ammonia hydroxide and diesel, with volume percentages of 7.5% and 92.5% respectively, was …

Enhancing Diesel Engine Performance By Directly Injecting Blends Of Ammonium Hydroxide And Including Liquid Petroleum Gas As A Partially Premixed Charge, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

Recently, scientists have made significant strides in addressing or mitigating environmental issues. Researchers have adopted various approaches to tackle these issues, such as replacing fossil fuels with more environmentally friendly alternatives or blending multiple fuel types. This can be achieved by either integrating these two trends through the use of new injection systems and simultaneous combustion of alternative fuels with fossil fuels or by modifying fuel injection systems, exemplified by the PCCI, RCCI, or HCCI systems. Consequently, these methods have proven effective in reducing environmental pollutants, enhancing thermal efficiency, and decreasing specific fuel consumption. In this study, ammonia hydroxide and …

Experimental Investigation On Combustion And Emission Characteristics Of Co-Combustion Of Pulverized Biomass With Diesel Fuel In An Industrial Burner, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ahmed Abou El-Yazied Prof. Dr., Saad El-Malla Dr. Eng.

Journal of Engineering Research

This study presents the combustion and emission results obtained from a laboratory furnace equipped with a 35 kW industrial burner that utilizes co-combustion of pulverized biomass and diesel fuel. The experiment compared the co-combustion of pulverized biomass and diesel fuel with diesel fuel alone. Three different loading ratios of pulverized biomass from residual beet samples were used. Temperatures were measured at various positions inside the furnace to analyze combustion performance. It was observed that increasing the biomass loading ratios led to higher flame temperatures and improved combustion compared to diesel fuel alone. The concentrations of pollutants such as Co, HC, …

Analyse Permeability And Integration In Architectural Landscapes To Create A Seamless Environment, Ensuring Ease Of Movement And Blending With The Surrounding Environment., Amira Fawzy Helmy Almaz

Journal of Engineering Research

The study explores the understanding of connectedness, integration, and axial route selection in urban parks using space syntax. It uses the Theory of Space Syntax to analyze georeferenced photographs and urban morphology data. The findings suggest that creating rules for integration and linkage that directly influence users' decision-making processes could lead to significant improvements in urban parks.

The study discusses space syntax as an architectural concept that views architecture as an interface between public and private spaces, analyzing landscapes through mirroring and focusing on internal configurations and exteriors. The study proposes a method to measure permeability and integration in urban …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …