Dental Materials Commons^™

Libro De Actividades Por El Mes Nacional De La Salud Dental Infantil [Spanish Language Version: National Children's Dental Health Month Activity Book] (2020), American Dental Association Foundation

National Children's Dental Health Month

No abstract provided.

Effect Of Surface Treatment And Storage Time On Immediate Repair Bond Strength Durability Of Methacrylate- And Ormocer-Based Bulk Fill Resin Composites., Sara Adel Botros

Dentistry

The aim of this study was to evaluate the effect of surface treatment and storage time on immediate repair bond durability of methacrylate- and ormocer-based bulk fill composites. In total, 265 discs were divided into 32 groups (n = 8/group) according to: (1) Material: X-tra fil and Admira Fusion X-tra; (2) Surface treatment: oxygen inhibition; matrix; Futurabond M+; Silane/Futurabond M+; Admira Bond; Silane/Admira Bond; ceramic repair system; and Silane/Cimara bond; and (3) Storage time: 24 h and 6 months. Each disc received three micro-cylinders from the same material. Specimens were subjected to micro-shear bond strength testing either at 24 h …

The Visual And Spectrophotometric Effect Of External Bleaching On Omnichroma Resin Composite And Natural Teeth, Michael Brian Evans

Graduate Theses, Dissertations, and Problem Reports (ETD)

Objective: To determine the visual and spectrophotometric effect external tooth bleaching has on natural tooth structure and OMNiCHROMA composite at various number of treatments. Variables were compared to determine if there is a detectable difference between the composite and the tooth before and after bleaching.

Methods: Preparation and restoration of 25 previously extracted teeth was completed. OMNiCHROMA composite was used. Each tooth was measured visually with a VITA shade guide and a colorimeter. Measurements were recorded before bleaching, after 5 and 10 treatments. Statistical analysis was completed and ΔE values between the composite and tooth were compared between the 3 …

Effect Of Different Scaling Methods And Materials On The Enamel Surface Topography: An In Vitro Sem Study, Mahmoud Al Ankily, Fatma Makkeyah, Mohamed Shamel, Mahmoud Bakr

Dentistry

Aims and Objectives: Scaling is important for maintenance of gingival and periodontal conditions. These procedures have a harmful effect on the dental hard tissues. The aim of this study was to investigate the effects of hand and ultrasonic instruments made of stainless and titanium on the surface properties of enamel. Materials and Methods: Forty extracted premolars were used in this in vitro study and were randomly divided into four groups (n = 10). Group I received ultrasonic scaling with stainless steel tip, group II received ultrasonic scaling with titanium tip, group III hand scaling with stainless steel tip, and group …

Assessment Of Physical Properties Of A Zno/E ~Sealer Modified By Adding Moringa Oleifera: An Experimental In-Vitro Study, Engy M. Kataia, `Maram E. Khallaf, Nada Omar, Yousra Aly, Nancy Elshafei

Dentistry

Aim: In an attempt to move toward exploration of the antibacterial properties of herbal products, this study evaluated the effect of how the addition of Moringa would affect the physical properties of the commercial Endofil sealer. Materials and Methods: An experimental in vitro study was performed using three experimental sealers. There were four groups in this study: Group A (ZnO/E sealer alone), Group B (ZnO/E and Moringa root), Group C (ZnO/E and Moringa leaf), and Group D (ZnO/E and Moringa leaf extract liquid). Measurements were carried out according to International Organization for Standardization (ISO) standardization 6876:2012. Moringa oleifera was added …

Three Dimensional Biometric Guide In Determining Maxillary Tooth Position And Arch Form, Tawfiq Omar Farouq

Student Works (2020-2029)

In complete denture fabrication, when pre-extraction records are lacking, determining the denture teeth positions to where the natural predecessors occupied is essential yet challenging. Although several biometric guides were suggested to position teeth for dentures, none is providing three-dimensional (3D) positions of teeth that can be used in the recently developed computer designed digital dentures. The aim of this study was to develop new biometric guides to determine the original 3D positions of the maxillary teeth and dental arch form individualised for each given dentate or edentulous maxillary cast based on selected intraoral landmarks. The objectives were to investigate the …

Investigation Of Inflammatory Responses Following The Use Of Novel Anisotropic Hydrogel Tissue Expander In The Skin Of Maxillofacial Region, Salim Igdayir Kholoud Mohamed Ali

Student Works (2020-2029)

Background: The purpose of tissue expander is to grow healthy supplementary tissue under the controlled of mechanical force exerted by the tissue expander. In the field of reconstructive and plastic surgery, the use of soft tissue expanders are important for growing healthy supplementary tissue. However, the molecular mechanism associated with the inflammatory response associated with the force generated from the use of tissue expanders is still not characterized. Among the many types of tissue expanders, anisotropic type of hydrogel tissue expander was chosen due to its ability to produce controlled incremental inflation on the tissue that enhance cellular adaptation and …

The Influence Of Fatigue Load To Various Adhesive Resin Luting Agents In A Zirconia-Reinforced Lithium Silicate Ceramic Bonded To Dentin, Ratikorn Watananiyom

Chulalongkorn University Theses and Dissertations (Chula ETD)

Purpose. To examine fatigue failure load value of etch-and-rinse and self-adhesive luting systems used to bond ZLS to dentin. Moreover, this study seeks to evaluate whether the application of unfilled resin on silanated ceramic intaglio surface could improve fatigue failure load value. Methods. Vita Suprinity (VS, Vita Zahnfabrik) blocks were sectioned into cylindrical shape (5 mm in diameter and 1.5 mm in height). All VS were crystallized, and bonded surfaces were treated as followed: Heliobond (HB, Ivoclar Vivadent) application after silanization and non-application of HB. Each VS was cemented to each flat occlusal dentin surface of extracted human molar, following …

The Stains Of Various Lipsticks On Maxillary Anterior Ceramic Veneers, Ratirat Chotipanvidhayakul

Chulalongkorn University Theses and Dissertations (Chula ETD)

This clinical study aims to determine differences in lipstick stains between ceramic veneers and natural teeth. Types of lipsticks affected lipstick stains on ceramic veneers and natural teeth were also investigated. A total of 30 patients were divided into two groups: ceramic-veneer (CV) group and natural-teeth (NT) group with 15 patients in each group. Seven lipstick types: Gloss & Balm, Gloss & Sheer, Cream, Liquid matte, Matte & Frost, Satin, and Matte were applied on patients’ lips. Six labial surfaces of maxillary anterior teeth were evaluated for the frequency of lipstick staining with each type of lipstick. Thus, 90 maxillary …

Effect Of Desensitizing Toothpaste Containing Calcium Sodium Phosphosilicate On Microtensile Bond Strength Of Adhesive Systems, Warin Sittiwaitayaporn

Chulalongkorn University Theses and Dissertations (Chula ETD)

Purpose: To evaluate the effect of a desensitizing toothpaste, containing calcium sodium phosphosilicate, on microtensile bond strength of adhesive systems treated to dentine. Methods: Fifty-two human third molars were embedded into acrylic resin, and cut to expose flat dentin surface. The specimens were randomly divided into two groups, 1) no brushing, and 2) brushing with Sensodyne Repair&Protect (GSK, London, UK) for 10,000 cycles with a V-8 cross brushing machine (Sabri Dental Enterprise, Inc., USA). Subsequently, both groups were divided into three groups for resin composite build-up using different adhesive agents (OptiBond FL® (Kerr, Orange, CA, USA), Clearfil SE Bond® (Kuraray …

Exploring The Use Of Pulsed Erbium Lasers To Retrieve A Zirconia Crown From A Zirconia Implant Abutment, Ahmed Elkharashi

Theses and Dissertations

Removal of zirconia crowns, commonly used as cement-retained implant fixed restorations, can be challenging. Conventional methods of crown removal are time consuming and often leave irreparable damage to the crown, which can be costly to patients and practitioners. This research explored the use of two different types of pulsed erbium lasers, erbium-doped yttrium aluminum garnet laser (Er:YAG) and erbium, chromium-doped yttrium, scandium, gallium and garnet (Er,Cr:YSGG), as non-invasive tools to retrieve cemented zirconia crowns from zirconia implant abutments. Times needed to remove the crowns were recorded and analyzed using ANOVA (��=0.05). No statistical differences between the debond times of each …