Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 357
Full-Text Articles in Dentistry
Evaluation Of Blending Ability Of Single-Shade Composite Relating To Different Cavity Depths And Abrasive Wear From Toothbrushing, Nattaporn Verayangkura
Evaluation Of Blending Ability Of Single-Shade Composite Relating To Different Cavity Depths And Abrasive Wear From Toothbrushing, Nattaporn Verayangkura
Chulalongkorn University Theses and Dissertations (Chula ETD)
Materials and Method: Eighty extracted human premolars were used for the shade‑matching evaluation. The materials tested in this study were Omnichroma (OC), Vittra APS Unique (VU), Charisma Diamond One (CD), and Filtek Z350 XT (FZ, control). The initial tooth shade was determined using a dental spectrophotometer and the reference color parameters (L, C, and H) were recorded with a laboratory spectrophotometer. A 4‑mm‑diameter cylindrical cavity was prepared in each tooth at restoration depths of either 1 mm or 2 mm. The prepared teeth in each restoration depth group were further divided into four subgroups based on the resin composite material …
Efficacy Of 0.3% Cannabidiol (Cbd) Oral Paste For Treatment Of Recurrent Aphthous Ulcers, Fuengboon Talkijkul
Efficacy Of 0.3% Cannabidiol (Cbd) Oral Paste For Treatment Of Recurrent Aphthous Ulcers, Fuengboon Talkijkul
Chulalongkorn University Theses and Dissertations (Chula ETD)
0.1% Cannabidiol (CBD) was reported to be suitable as an alternative management for Recurrent Aphthous Ulcers (RAU) due to its analgesics and anti-inflammatory effects. This study aimed to examine 0.3 % CBD when compared to 0.1% CBD, 0.1% Triamcinolone Acetonide (TA) oral paste and pure oral paste in the treatment of RAU. For safety investigations, 100 healthy subjects were examined for allergic reaction to 0.3% CBD oral paste compared to pure oral paste, then 50 healthy subjects were evaluated for local and systemic effects of 0.3% CBD oral paste in which blood tests were performed before drug application and seven …
Stress And Burnout Level Among Bhutanese Dentists And Medical Officers In Bhutan, Karma Zangmo
Stress And Burnout Level Among Bhutanese Dentists And Medical Officers In Bhutan, Karma Zangmo
Chulalongkorn University Theses and Dissertations (Chula ETD)
Healthcare professionals, particularly dentists and physicians, are at high risk of stress and burnout due to long working hours, heavy workloads, clinical decision-making responsibilities, and the need for continuous knowledge updates. This study aimed to assess stress and burnout levels among Bhutanese dentists and physicians. A cross-sectional survey was conducted using online questionnaires distributed to 85 dentists and 325 physicians, with response rates of 87.7% and 52.6%, respectively. Stress was measured using the 14-item Perceived Stress Scale (PSS), and burnout was assessed with the 22-item Maslach Burnout Inventory (MBI). Among dentists, 97.8% reported stress, with 91.8% at moderate levels. Among …
Effect Of Characteristics Of Titanium Dental Implant And Patient Related Factors On Implant Stability: 2-Year Retrospective Follow-Up Study, Kyaw Zin Thein
Effect Of Characteristics Of Titanium Dental Implant And Patient Related Factors On Implant Stability: 2-Year Retrospective Follow-Up Study, Kyaw Zin Thein
Chulalongkorn University Theses and Dissertations (Chula ETD)
Background: Dental implants offer improvements in oral function and aesthetics for edentulous patients. Thai dental implants have emerged as a cost-effective alternative product. Objective: This study aimed to evaluate factors that influence the success of PRK dental implants over a two-year follow-up period. Methods: This retrospective study included patient records of at least one unit of PRK implant-supported prosthesis with a minimum of two-year of follow-up between 2020 and 2025 at the Dental Innovation Foundation under Royal Patronage, Thailand. Data was extracted on demographics, oral habits, medical history, and periodontal parameters (plaque index, pocket depth, keratinized gingiva width, and gingival …
Influence Of Shade On Color Reproducibility Of Lithium Disilicate Crowns, Naphat Santiworanart
Influence Of Shade On Color Reproducibility Of Lithium Disilicate Crowns, Naphat Santiworanart
Chulalongkorn University Theses and Dissertations (Chula ETD)
Objective: This study aimed to evaluate the influence of nominal shade on the color reproducibility of CAD-CAM lithium disilicate glass ceramic crowns.Materials and Methods: An in vitro study was conducted on 16 CAD-CAM lithium disilicate crowns (IPS e.max CAD LT) fabricated in four VITA Classical shades (A3, B3, C3, D3; N=4 per group). Each crown was cemented on a corresponding polymethylmethacrylate (PMMA) abutment of matching shade. Shade determination was performed using a spectrophotometer and an intraoral scanner under controlled conditions. Color trueness was assessed against the VITA Classical shade guide using exact match and broad acceptance criteria. The L*, a*, …
Effect Of Printing Orientation And Surface Treatment On The Surface Roughness, Shear Bond Strength, And Flexural Strength Of 3d-Printed Provisional Materials, Kornrawee Wiroonsri
Effect Of Printing Orientation And Surface Treatment On The Surface Roughness, Shear Bond Strength, And Flexural Strength Of 3d-Printed Provisional Materials, Kornrawee Wiroonsri
Chulalongkorn University Theses and Dissertations (Chula ETD)
This study aimed to evaluate the influence of printing orientation and surface treatment on the surface roughness, shear bond strength (SBS), and flexural strength of three-dimensional (3D)-printed provisional resin materials. Four printing orientations (0°, 45°, 60°, and 90°) and four surface treatments (no treatment, airborne particle abrasion (APA), tetrahydrofuran (THF), and HC primer) were investigated. A total of 320 specimens were fabricated, post-processed, and tested according to ISO standards. Among these, 240 disk-shaped specimens were utilized for surface roughness assessment, conducted using a non-contact profilometer, and for SBS evaluation through a notched-edge shear test. Additionally, 80 rectangular bar specimens were …
Physico-Mechanical And Antibacterial Properties Of Resin-Based Dental Sealants Modified With Graphene Oxide Nanoparticles, Ploypim Kraisintu
Physico-Mechanical And Antibacterial Properties Of Resin-Based Dental Sealants Modified With Graphene Oxide Nanoparticles, Ploypim Kraisintu
Chulalongkorn University Theses and Dissertations (Chula ETD)
Objectives: This study evaluated the effects of incorporating graphene oxide (GO) nanoparticles at different concentrations (0.1, 0.25, and 0.5 wt%) into resin-based pit and fissure sealants. Mechanical, physical, antibacterial, and cytotoxicity were tested and compared with a commercial reference material.Materials and Methods: An experimental resin-based sealant was formulated and reinforced with GO (G2–G4), while an unmodified resin served as control (G1) and Helioseal® F Plus as commercial comparison (G5). GO morphology was characterized by TEM. Specimens (n=240) were tested for Vickers microhardness, viscosity, surface roughness (DRa) after simulated toothbrushing, and fluorescence (% blue channel). Antibacterial activity against Streptococcus mutans was …
Occlusal Analysis Using A Novel Classification Of Static And Dynamic Articulations In Tmd And Non-Tmd Patients, Uthai Uma
Chulalongkorn University Theses and Dissertations (Chula ETD)
Background: Temporomandibular disorders (TMD) are multifactorial conditions affecting masticatory systems. While occlusal morphology has been suggested as a contributing factor, functional, behavioral, and postural elements may play a more prominent role. This study aimed to evaluate demographic, clinical, occlusal, and functional characteristics associated with TMD in a Thai patient population using a novel articulation classification. Methods: A retrospective analysis of 872 participants (684 TMD, 188 non-TMD) was conducted. Data included demographic characteristics, postural and habitual behaviors, occlusal morphology, articulation classification, articulation ratios, mandibular range of motion, and TMD diagnostic categories. The articulation classification and ratios were designed and tested for …
Protein Expression Of Bone Marrow Mesenchymal Stem Cells Transfected On Green Fluorescent Protein Mrna And Collagen-Coated Titanium Disk, Wasamon Swangvong
Protein Expression Of Bone Marrow Mesenchymal Stem Cells Transfected On Green Fluorescent Protein Mrna And Collagen-Coated Titanium Disk, Wasamon Swangvong
Chulalongkorn University Theses and Dissertations (Chula ETD)
New strategies for surface modification have been explored to promote osseointegration and osteogenesis, which are crucial factors for the success of titanium dental implants. Coating the titanium surface with mRNA encoding therapeutic growth factors may achieve these objectives. In our pilot study, we employed green fluorescent protein (GFP) mRNA as a model. Our investigation focused on determining whether titanium disks coated with GFP mRNA encapsulated with lipid nanoparticles and collagen Type I (GFP mRNA-Col) could enhance transfection in human bone marrow mesenchymal stem cells (hBMSCs), in comparison to titanium disks coated with GFP mRNA alone, without collagen. We tested various …
The Effect Of Systemic Antibiotics On Post-Surgical Complications And Patient-Reported Outcomes In Dental Implant Surgery With Simultaneous Sinus Floor Augmentation, Sutinee Tangamnuay
The Effect Of Systemic Antibiotics On Post-Surgical Complications And Patient-Reported Outcomes In Dental Implant Surgery With Simultaneous Sinus Floor Augmentation, Sutinee Tangamnuay
Chulalongkorn University Theses and Dissertations (Chula ETD)
Unnecessary antibiotic prescriptions can raise healthcare costs and affect the quality of life due to their related side effects. Objectives: Aim to assess the impact of antibiotic prophylaxis (AP) on the prevalence of postoperative complications in patients undergoing simultaneous implant placement with lateral sinus floor augmentation. Materials and Methods: A randomized, triple-blind, placebo-controlled trial was conducted involving 30 healthy patients. Participants were divided into two groups: one received 2g of amoxicillin before surgery and 500mg three times daily for three days post-surgery (antibiotic group, N=15), while the other received a placebo (N=15). Postoperative complications were evaluated at 2, 4, and …
The Influence Of Implant Thread Designs On The Secondary Stability Of Dental Implant, Rujira Charoenniwassakul
The Influence Of Implant Thread Designs On The Secondary Stability Of Dental Implant, Rujira Charoenniwassakul
Chulalongkorn University Theses and Dissertations (Chula ETD)
Objective: This study aimed to evaluate the secondary stability of aggressive thread design implant (BLX) comparing to nonaggressive thread design implant (BL) using Implant Stability Quotient (ISQ) values and Implant stability test (IST) values. Materials and Methods: Forty-five patients with healed edentulous areas were included and randomly allocated into test and control groups. Thirty-two BLX implants and thirty-two BL implants were used in the test and control groups, respectively. Dental implant stability was assessed using IST and ISQ values. IST values were measured immediately (T1), on day 2 (T2), and at 1 (T3), 2 (T4), 3 (T5), 4 (T6), 5 …
การศึกษาการสึกระหว่างโคบอลต์โครเมียมและวัสดุเซรามิกที่ใช้ในงานทันตกรรมดิจิตอล, มรกต ไทยรัตน์
การศึกษาการสึกระหว่างโคบอลต์โครเมียมและวัสดุเซรามิกที่ใช้ในงานทันตกรรมดิจิตอล, มรกต ไทยรัตน์
Chulalongkorn University Theses and Dissertations (Chula ETD)
วัตถุประสงค์: ทำการศึกษาสภาวะจำลองเพื่อวัดการสูญเสียปริมาตรจากการสึกหลังจากจำลองการขัดถู 250,000 รอบของโลหะผสมโคบอลต์โครเมียม (CoCr) กับวัสดุที่ใช้ทำการบูรณะฟันหลักห้าชนิด วัสดุและวิธีการ: เตรียมตัวอย่างทดสอบตัดเป็นสี่เหลี่ยมจำนวนชนิดละ 8 ชิ้น (5 x 5 x 2 มิลลิเมตร) จากโลหะผสมที่ไม่มีทองผสม (NP), ลิเธียมไดซิลิเกต (EM) เธียมไดซิลิเกตเสริมความแข็งแรง (TR) เซรามิคที่มีเรซินเป็นฐาน (CM) และเซอร์โคเนีย (ZR) ตัวอย่าง EM TR และ ZR ได้รับการเผาตามคำแนะนำของผู้ผลิต แท่งโลหะผสมโคบอลต์โครเมียมสร้างขึ้นโดยการหล่อโลหะแบบไล่ขี้ผึ้ง จำลองการสึกแบบสององค์ประกอบด้วยเครื่องจำลองการสึกจากการขัดถู จำนวน 250,000 รอบ วัดการสูญเสียปริมาตรของชิ้นงานทดสอบโดยใช้เครื่องวัดความหยาบพื้นผิว การสูญเสียปริมาตรของแท่งโลหะผสมคำนวณโดยการความยาวที่ลดลงและรัศมีของพื้นที่ที่เกิดบริเวณที่สึก วิเคราะห์ข้อมูลทางสถิติโดยใช้ MANOVA (pNP>ZR) การสูญเสียปริมาตรของแท่งโลหะหลังการสึกในกลุ่ม CM น้อยกว่าในกลุ่ม EM และ NP ในขณะที่กลุ่มอื่น ๆ ไม่มีความแตกต่างกันอย่างมีนัยสำคัญ
การประเมินการต้านทานการแตกหักในฟันหน้าที่ผ่านการเหนี่ยวนำให้ปลายรากฟันปิดด้วยเอ็มทีเอและได้รับการเสริมความแข็งแรงของคลองรากฟัน: การศึกษาในห้องทดลอง, ธัญพฤฒ อุตมวาทิน
การประเมินการต้านทานการแตกหักในฟันหน้าที่ผ่านการเหนี่ยวนำให้ปลายรากฟันปิดด้วยเอ็มทีเอและได้รับการเสริมความแข็งแรงของคลองรากฟัน: การศึกษาในห้องทดลอง, ธัญพฤฒ อุตมวาทิน
Chulalongkorn University Theses and Dissertations (Chula ETD)
การแตกของรากฟันเป็นความล้มเหลวที่พบได้บ่อยในฟันที่ได้รับการเหนี่ยวนำให้ปลายรากฟันปิดด้วยเอ็มทีเอ งานวิจัยนี้จึงมีวัตถุประสงค์เพื่อศึกษาวัสดุเสริมความแข็งแรงที่เหมาะสมภายหลังการเหนี่ยวนำให้ปลายรากฟันปิดด้วยเอ็มทีเอภายใต้สภาวะจำลองในช่องปาก โดยแบ่งการศึกษาออกเป็น 2 ตอน ตอนที่ 1: เพื่อศึกษาผลของความหนาของเนื้อฟัน ฟันจำนวน 24 ซี่ (n=8) ถูกแบ่งเป็น 3 กลุ่ม ได้แก่ กลุ่มควบคุมที่มีรากฟันสมบูรณ์ กลุ่มที่จำลองให้มีความหนาเนื้อฟัน 2.0 มม. และ 1.5 มม. โดยใช้ Peeso reamer ขยายโพรงรากจนได้ความหนาตามที่กำหนด ตอนที่ 2: เพื่อศึกษาผลของวัสดุเสริมความแข็งแรง รากฟันจำนวน 40 ซี่ถูกเตรียมให้มีลักษณะรากอ่อนแอโดยจำลองความหนาเนื้อฟัน 1.5 มม. และปิดปลายรากด้วยเอ็มทีเอจากนั้นแบ่งเป็น 5 กลุ่ม (n=8) ได้แก่ กลุ่มกัตทาเพอร์ชา, เอ็มทีเอ, เรซินคอมโพสิตชนิดบ่มตัวร่วม, เดือยฟันเสริมเส้นใย และเดือยฟันเสมือนรากฟัน ทุกกลุ่มตัวอย่างผ่านกระบวนการเปลี่ยนอุณหภูมิร้อนเย็นแบบเป็นจังหวะและการลงแรงแบบเป็นวัฏจักร ก่อนทดสอบการรับแรงกดจนแตก บันทึกลักษณะการแตกและแรงสูงสุดก่อนการแตก วิเคราะห์ข้อมูลด้วย one-way ANOVA และ Tukey’s test รวมถึง Weibull regression เพื่อวิเคราะห์ความน่าจะเป็นของการอยู่รอด พบว่ากลุ่มที่มีความหนาเนื้อฟัน 1.5 มม. มีความทนต่อแรงแตกหักต่ำกว่ากลุ่มควบคุมและกลุ่มที่มีความหนา 2.0 มม. อย่างมีนัยสำคัญ พบการแตกของรากในแนวเฉียงในตัวอย่างทั้งหมด สำหรับกลุ่มเดือยฟันเสริมเส้นใย พบการแตกบ่อยที่บริเวณรอยต่อระหว่างเอ็มทีเอกับเดือยฟัน ขณะที่กลุ่มเรซินคอมโพสิตชนิดบ่มตัวร่วมมีค่าความทนต่อแรงแตกหักและความน่าจะเป็นในการอยู่รอดใกล้เคียงกับกลุ่มควบคุมที่มีรากฟันสมบูรณ์ ดังนั้นภายใต้ขอบเขตของการศึกษานี้ พบว่าสามารถใช้เรซินคอมโพสิตแบบบ่มตัวร่วมในการเสริมความแข็งแรงของฟันที่ได้รับการเหนี่ยวนำให้ปลายรากฟันปิดด้วยเอ็มทีเอได้อย่างมีประสิทธิภาพ
การเพาะเลี้ยงเซลล์ 3 มิติด้วยแม่เหล็กของเซลล์ต้นกำเนิดจากเซลล์เนื้อเยื่อในฟันมนุษย์และศักยภาพในการนำไปใช้ในทันตกรรมฟื้นฟู, นิก้า จอร์เจีย ซาลาซ่าร์
การเพาะเลี้ยงเซลล์ 3 มิติด้วยแม่เหล็กของเซลล์ต้นกำเนิดจากเซลล์เนื้อเยื่อในฟันมนุษย์และศักยภาพในการนำไปใช้ในทันตกรรมฟื้นฟู, นิก้า จอร์เจีย ซาลาซ่าร์
Chulalongkorn University Theses and Dissertations (Chula ETD)
การศึกษานี้พัฒนาระบบไฮโดรเจลอัลจิเนตที่ถูกออกซิไดซ์ เพื่อส่งผ่านปัจจัยกระตุ้นการเจริญของเซลล์ประสาททั้งแบบต่อเนื่องและทางอ้อม เพื่อส่งเสริมการเปลี่ยนแปลงไปเป็นเซลล์ประสาทของสเต็มเซลล์ที่ได้จากจากเนื้อเยื่อในฟันของมนุษย์ โดยได้ทำการวิเคราะห์ลักษณะของไฮโดรเจลในด้านระดับการออกซิไดซ์ การดูดซับน้ำ การย่อยสลาย และการปลดปล่อยโปรตีน ผลแสดงให้เห็นถึงการปลดปล่อยโปรตีนต้นแบบและ ปัจจัยกระตุ้นการเจริญของเซลล์ประสาทได้ตามช่วงเวลา ในการเพาะเลี้ยงเซลล์แบบ สองมิติ การร่วมเลี้ยงแบบทางอ้อมกับไฮโดรเจลที่พัฒนา พบว่าการแสดงออกของยีนและโปรตีนของตัวบ่งชี้เซลล์ประสาท (เนสติน, ดีซีเอกซ์และ เบต้าทรี ทุบูลิน) เพิ่มขึ้นอย่างมีนัยสำคัญ ความมีชีวิตของเซลล์ยังคงสูงตลอดการทดลอง แสดงถึงความเข้ากันได้ทางชีวภาพของไฮโดรเจลนี้ สำหรับการเปลี่ยนแปลงเป็นเซลล์ประสาทในระบบ สามมิติ ได้มีการสร้างสเฟียร์รอยด์ที่มีชีวิตและมีโครงสร้างแน่นหนาสำเร็จด้วยเทคนิค การปรินต์สามมิติด้วยแม่เหล็กผลการทดลองพบว่าสเฟียร์รอยด์ที่ใช้จำนวน10,000 เซลล์จะมีรูปร่างและความมีชีวิตที่เหมาะสมที่สุด นอกจากนี้ผลการทดลองปัจจุบันแสดงให้เห็นว่ามีศักยภาพของไฮโดรเจลในฐานะเป็นแพลตฟอร์มในการส่งผ่านโปรตีนเพื่อกระตุ้นการพัฬนาไปเป็นเซลล์ประสาทโดย ไม่ต้องใช้โครงร่างและสนับสนุนการประยุกต์ใช้งานในอนาคตกับงานวิจัยสเต็มเซลล์ระดับสามมิติและในระดับคลินิกในเชิงเวชศาสตร์ฟื้นฟูในสาขาทันตกรรมเอนโดดอนต์
The Comparison Of Learning Outcome Between Implant Placement Training With Xguide Vs Iris100 Navigation In Different Anatomical Situations, Supichaya Thanasanpaiboon
The Comparison Of Learning Outcome Between Implant Placement Training With Xguide Vs Iris100 Navigation In Different Anatomical Situations, Supichaya Thanasanpaiboon
Chulalongkorn University Theses and Dissertations (Chula ETD)
This study aimed to evaluate the learning outcomes, accuracy, efficiency, and user perceptions of two dynamic navigation systems, X-Guide and IRIS-100, in implant placement training for novice dentists across varying anatomical complexities.Fourteen novice dentists were initially recruited, with 12 completing the full training program. Participants underwent implant placement training on models representing straightforward and advanced cases using two training sequences: X-Guide followed by IRIS-100, and IRIS-100 followed by X-Guide. Accuracy was assessed by measuring angular, coronal, and apical deviations, as well as operation time, across pre-test, post-test 1, and post-test 2 phases using the freehand technique, followed by repeated measures …
Biological Effects Of Photobiomodulation On C2c12 Cell Culture Under Inflammatory Environment, Duong Le Dai
Biological Effects Of Photobiomodulation On C2c12 Cell Culture Under Inflammatory Environment, Duong Le Dai
Chulalongkorn University Theses and Dissertations (Chula ETD)
Backgrounds: In the last decade, photobiomodulation (PBM) has been utilized as a complementary therapeutic option for the management of musculoskeletal disorders such as temporomandibular disorders (TMD). However, its mechanism of action in skeletal muscle cells like the C2C12 myoblasts remains poorly understood. Thus, this study aimed to investigate the effects of PBM, using low-level light therapy (LLLT), on the proliferation and differentiation capacity of C2C12 cells cultured under normal media and compared with cells under proinflammatory environments. Materials and Methods: PBM treatment consisted of the following LLLT dose regimens: 1-day of 3, 5, and 7 J/cm2/day single doses and 2-day …
ความแตกต่างของความต้านทานความสึกของเฝือกสบฟันที่ใช้มุมการพิมพ์แบบสามมิติที่ต่างกัน, จรินทร์ทิพย์ สุวรรณบุตร
ความแตกต่างของความต้านทานความสึกของเฝือกสบฟันที่ใช้มุมการพิมพ์แบบสามมิติที่ต่างกัน, จรินทร์ทิพย์ สุวรรณบุตร
Chulalongkorn University Theses and Dissertations (Chula ETD)
เนื่องจากแนวโน้มในปัจจุบันของวัสดุทางทันตกรรมมุ่งเน้นไปที่การนำกระบวนการทางดิจิทัลมาใช้ในทางคลินิกอย่างเป็นรูปธรรม ตัวอย่างเช่น การใช้เทคโนโลยีการพิมพ์สามมิติในการผลิตอุปกรณ์ต่าง ๆ การศึกษาครั้งนี้จึงมุ่งเน้นการประเมินความทนต่อการสึกหรอของชิ้นงานที่ผลิตจากวัสดุสำหรับอุปกรณ์เฝือกสบฟัน (occlusal splint) โดยการพิมพ์สามมิติที่มุมการพิมพ์ต่างกัน เพื่อตรวจสอบมุมที่เหมาะสมที่สุดในการต้านทานการสึกหรอ เนื่องจากความทนต่อการสึกหรอและความแข็งของผิววัสดุเป็นปัจจัยสำคัญที่มีผลต่ออายุการใช้งานของอุปกรณ์เฝือกสบฟัน อย่างไรก็ตาม งานวิจัยที่ผ่านมาเกี่ยวกับการพิมพ์สามมิติมักมุ่งเน้นไปที่คุณสมบัติอื่น เช่น ความหยาบผิวขณะพิมพ์ (as-built surface roughness) หรือชนิดของวัสดุที่ใช้เป็นหลัก ดังนั้น การศึกษาครั้งนี้จึงให้ความสนใจในประเด็นดังกล่าว ตัวอย่างการทดลองจำนวน 6 ชิ้นต่อกลุ่มถูกสร้างขึ้นภายใต้ข้อกำหนดของมาตรฐาน ISO 14569-2 โดยชิ้นงานแต่ละชิ้นถูกกดด้วยเครื่องไฮดรอลิกด้วยแรงประมาณเท่ากับแรงบดเคี้ยวสูงสุดของผู้ป่วย bruxism (225 นิวตัน) ที่ความถี่ 1 เฮิรตซ์ จำนวน 840 ครั้ง ความหยาบผิวของชิ้นงานก่อนและหลังการทดสอบวัดด้วยเครื่องโปรฟิโลมิเตอร์แบบสัมผัส (contact profilometer) จากนั้นจึงทำการทดสอบความแข็งผิวด้วยเครื่องทดสอบไมโครฮาร์ดเนส (microhardness testing machine) ผลการทดลองแสดงให้เห็นว่าชิ้นงานที่พิมพ์ด้วยมุม 90 องศามีค่าความลึกของการสึกหรอต่ำที่สุด โดยค่าการสึกหรอเพิ่มขึ้นตามลำดับที่มุม 60, 30 และ 0 องศา ซึ่งมีความสัมพันธ์กับผลการทดสอบความแข็งของผิววัสดุ อย่างไรก็ตาม ในการนำผลการศึกษานี้ไปประยุกต์ใช้จริง ควรพิจารณาคุณสมบัติอื่น ๆ ที่อาจส่งผลต่อการใช้งานในแต่ละมุมการพิมพ์ร่วมด้วยอย่างรอบคอบ
Evaluation Of Cytotoxicity And Gene Expression Of Primary Human Periodontal Ligament Cells Against The Newly-Developed Bioceramic Sealer, Chanathip Chatphatthanasiri
Evaluation Of Cytotoxicity And Gene Expression Of Primary Human Periodontal Ligament Cells Against The Newly-Developed Bioceramic Sealer, Chanathip Chatphatthanasiri
Chulalongkorn University Theses and Dissertations (Chula ETD)
This study aimed to compare the biological properties of a newly developed cockle shell-derived bioceramic sealer (NDBS) with those of iRoot SP in relation to human periodontal ligament (hPDL) cells. NDBS was prepared according to previous study, and both sealers were extracted in complete medium and diluted into four concentrations (non-diluted, 1:2, 1:4, and 1:8). Biocompatibility testing followed ISO 7405 standards, using the MTT assay to assess cytotoxicity and proliferation at 1, 3, and 7 days. pro-inflammatory (IL-6, IL-8, TNF-α) and mineralization (ALP and OCN) gene expression analysis were performed using RT-qPCR on cells treated with 1:4 diluted extracts. MTT …
Inflammatory Responses Of Peri-Implant Crevicular Fluid On Different Dental Implant Abutment Materials After 6-Months Functional Loading: A Randomized Clinical Controlled Trial, Penkamol Wongrattanapasson
Inflammatory Responses Of Peri-Implant Crevicular Fluid On Different Dental Implant Abutment Materials After 6-Months Functional Loading: A Randomized Clinical Controlled Trial, Penkamol Wongrattanapasson
Chulalongkorn University Theses and Dissertations (Chula ETD)
Different abutment materials induce different immune responses in peri-implant soft tissues. Previous study showed that Ti base abutments without loading demonstrated comparable soft tissue-reaction to titanium abutments (Sampatanukul et al., 2018). Inflammatory responses after functional loading had not been elucidated in the previous study. This study investigates the inflammatory responses of peri-implant crevicular fluid around two abutment materials; titanium and titanium base (Ti base) after 6-months functional loading and identifies suitable abutment material which can induce stable inflammatory response in the peri-implant soft tissue. Sixteen implants of either Neodent or Straumann single implants were placed in sixteen patients in anterior …
Effects Of Fluocinolone Acetonide Treatment On Lps-Stimulated Human Dental Pulp Cells: An In Vitro Study, Supphachart Chayawatto
Effects Of Fluocinolone Acetonide Treatment On Lps-Stimulated Human Dental Pulp Cells: An In Vitro Study, Supphachart Chayawatto
Chulalongkorn University Theses and Dissertations (Chula ETD)
The inflammatory status of pulp tissue is one of the factors influencing the outcome of vital pulp therapy. Corticosteroids are well known for their anti-inflammatory properties and their role in promoting mineralization-related differentiation in human dental pulp cells (HDPCs). However, studies investigating the effects of corticosteroids under inflammatory conditions in HDPCs remain limited. This study aimed to compare the effect of fluocinolone acetonide (FA), mineral trioxide aggregate (MTA), and their combination on inflamed HDPCs, focusing on cell viability, expression of inflammatory and mineralization-related genes, and mineralization-related differentiation. HDPCs were treated with 20 µg/mL lipopolysaccharide (LPS) alone or in combination with …
Effect Of Different Surface Characterizations On Color Stability And Surface Roughness Of Provisional Materials After Toothbrushing, Sarasinee Sattawatthamrong
Effect Of Different Surface Characterizations On Color Stability And Surface Roughness Of Provisional Materials After Toothbrushing, Sarasinee Sattawatthamrong
Chulalongkorn University Theses and Dissertations (Chula ETD)
This study aimed to evaluate the surface roughness of 5 provisional materials with different surface characterization methods after simulating 1 year of toothbrushing. Specimens were fabricated from autopolymerized polymethyl methacrylate (UNIFAST Trad), autopolymerized bis-acryl composite resin (Protemp 4), light-activated composite resin (REVOTEK LC), milled polymethyl methacrylate block (DD provi P HI), and 3-dimensionally printed methacrylate oligomer (Nextdent C&B MFH). Each material was divided into 3 groups: polishing, application of Lite Art and Resin Glaze, and application of OPTIGLAZE color. After 5,000 and 10,000 toothbrushing cycles, surface roughness was measured. A 3-way repeated measures ANOVA was conducted to analyze the effects …
P2x7r And P2x4r Expression Of Mice Submandibular Gland In High‑Fat Diet/Streptozotocin‑Induced Type 2 Diabetes, Jiratchaya Srisutha
P2x7r And P2x4r Expression Of Mice Submandibular Gland In High‑Fat Diet/Streptozotocin‑Induced Type 2 Diabetes, Jiratchaya Srisutha
Chulalongkorn University Theses and Dissertations (Chula ETD)
Type 2 diabetes mellitus (T2DM) is a chronic inflammatory disease that can compromise the functioning of various organs, including the salivary glands (SG). The purinergic system is one of the most important inflammatory pathways in T2DM condition, and P2X7R and P2X4R are the primary purinergic receptors in SG that regulate inflammatory homeostasis. This study aimed to evaluate P2X7R and P2X4R expression, and morphological changes in the submandibular gland (SMG) in T2DM. Twenty‑four 5‑week‑old mice were randomly assigned to control (CON) and diabetes mellitus (DM) groups (n = 12 each). Body weight, diet, and blood glucose levels were monitored weekly. The …
Roles Of B-Cell Lymphoma 6 In Orthodontic Tooth Movement Of Rat Molars, Wasupol Sodsook
Roles Of B-Cell Lymphoma 6 In Orthodontic Tooth Movement Of Rat Molars, Wasupol Sodsook
Chulalongkorn University Theses and Dissertations (Chula ETD)
B-cell lymphoma 6 (Bcl6) inhibits osteoclast differentiation in vitro; however, its role in orthodontic tooth movement (OTM) remains unclear. This study aimed to investigate the role of Bcl6 in OTM of rat molars.Materials and Methods: OTM was performed on the maxillary first molars of male rats using nickel-titanium coil springs (25 gf) for 14 days with or without local injection of FX1 (50 mg/kg), a Bcl6 inhibitor (n = 10 per group). Micro-computed tomography (CT) images were used to analyse OTM distance and bone morphometric parameters. Immunohistochemistry (IHC) determined Bcl6 expression and tartrate-resistant acid phosphatase staining (TRAP)staining assessed osteoclast differentiation. …
The Effect Of Cement Thickness On Shear Bond Strength Of Zirconia With Three Different Self-Adhesive Resin Cements, Thofun Ieamsuwantada
The Effect Of Cement Thickness On Shear Bond Strength Of Zirconia With Three Different Self-Adhesive Resin Cements, Thofun Ieamsuwantada
Chulalongkorn University Theses and Dissertations (Chula ETD)
Objective: This study aimed to evaluate the influence of resin cement thickness on the shear bond strength (SBS) to zirconia using different self-adhesive resin cements (SAC). Materials and Methods: One hundred twenty irconia specimens were prepared, air abraded with 50 μm aluminium oxide particles and divided into 12 groups (n = 10), according to the cement thickness (50, 100, 150, and 200 μm) and SAC (RelyXTM U200, PANAVIATM SA LUTING Multi, MaxcemTM Elite Chroma). The specimens were cemented to resin composite blocks with SAC, stored in water at 37°C for 24 hours and subjected to the SBS test. Mode of …
Clinical Outcomes, Patient-Reported Outcomes, And Efficiency Of Static Computer-Assisted Sinus Floor Augmentation: A Randomized Controlled Trial, Nattakarn Narongchai
Clinical Outcomes, Patient-Reported Outcomes, And Efficiency Of Static Computer-Assisted Sinus Floor Augmentation: A Randomized Controlled Trial, Nattakarn Narongchai
Chulalongkorn University Theses and Dissertations (Chula ETD)
Objective: To investigate the patient-reported ,clinical outcomes and efficacy of static computer-assisted sinus floor augmentation (SCA-SFA), compared to freehand approach. Material and methods: 40 patients underwent lateral sinus augmentation (20 freehand-SFA + 20 SCA-SFA). Patient-reported outcomes were recorded in Visual Analog Scale (VAS) on days 1-7, 14 and intra- and post-operative complications were recorded on week 2,4 after surgery. Duration and operators’ assessment of SCA-SFA efficacy were recorded. Results: No statistically significant difference was found between the two groups with regards to PROMs and intra-, post-operative complications, apart from higher level of swelling for SCA-SFA patients on day 2 after …
Association Between Ageing Perception And Oral Health Dimensions In Thai Older People, Nattapat Khongsirisombat
Association Between Ageing Perception And Oral Health Dimensions In Thai Older People, Nattapat Khongsirisombat
Chulalongkorn University Theses and Dissertations (Chula ETD)
Background: Maintaining good oral health as people age is just as important as overall health. Ageing perception, how individuals perceive their ageing process, has been shown to affect health outcomes. However, the relationship between ageing perception and oral health, including oral health-related quality of life (OHRQoL), remains underexplored. Objective: This study explores the associations between ageing perception, oral health dimensions, and OHRQoL among older Thai people. Methods: The study was conducted in two phases. Phase I translated and validated the Thai version of the short-form Attitudes to Ageing Questionnaire (Thai AAQ-SF). Phase II focused on hypothesis testing through structured interviews …
The Effect Of Surface Treatments And Coffee Thermocycling On Color Stability And Translucency Of Cad-Cam Polychromatic High-Translucent Zirconia Compared With Lithium Disilicate Glass Ceramic, Ratchaphat Khomprang
The Effect Of Surface Treatments And Coffee Thermocycling On Color Stability And Translucency Of Cad-Cam Polychromatic High-Translucent Zirconia Compared With Lithium Disilicate Glass Ceramic, Ratchaphat Khomprang
Chulalongkorn University Theses and Dissertations (Chula ETD)
Objectives: To evaluate effects of surface treatments on the color stability (ΔE) and translucency parameter (TP) of Gradient Multilayered yttria-stabilized Zirconia (GMZ), Ultra-translucent multilayered Zirconia (UTML) and lithium disilicate glass ceramic (LD) under coffee thermocycling. Methods: 27 samples from each material were classified into 3 groups (polished, glazed, and glazed+pumice). A dental spectrophotometer was utilized to measure the color coordinates before and after thermocycling. The color and translucency differences (ΔE and ΔTP) measurements were determined using the CIELAB formula, and their corresponding 50%:50% perceptibility and acceptability thresholds (PT and AT) were used for analysis. One-way ANOVA and Two-way ANOVA was …
Effect Of Chairside Silicone Polishing Systems On The Surface Roughness Of Cad/Cam Milled And Conventional Denture Base Materials, Sarita Apiromwijit
Effect Of Chairside Silicone Polishing Systems On The Surface Roughness Of Cad/Cam Milled And Conventional Denture Base Materials, Sarita Apiromwijit
Chulalongkorn University Theses and Dissertations (Chula ETD)
Purpose: The objective of this study was to evaluate the effect of two commercial chairside polishing systems compared with conventional laboratory polishing on the surface roughness of two types of denture base materials. Methods: Square-shaped specimens (8x8x5 mm) were fabricated from CAD/CAM milled and heat-polymerized denture base materials. Each specimen was ground with tungsten carbide and then divided into three groups according to polishing techniques(n=8): Exa technique, AcryPoint, and conventional laboratory polishing. The roughness (Ra) values were measured using a non-contact profilometer after finishing with tungsten carbide bur, every 30 seconds with each subsequent polisher (rough, medium, and fine) of …
Analysis Of The Soft Tissue Chin Profile In Acceptable Aesthetic Profiles Using A 3-Dimensional Camera Facial Scan System Compared To Normative Values Based On 2-Dimensional Radiographic Analysis, Sasawat Putpinij
Chulalongkorn University Theses and Dissertations (Chula ETD)
Chin profile plays a critical role in determining lower facial aesthetics, significantly affects perceptions of facial balance and attractiveness. Conventional assessment methods, which primarily rely on two-dimensional cephalometric norms, are limited by projection errors and a reduced capacity to accurately evaluate soft tissue contours. The development of three-dimensional facial scanning technology has facilitated more accurate assessment of facial morphology; nevertheless, aesthetic evaluation in acceptable aesthetic profile using 3-dimensional camera facial scan remains no evidence. Hence, this study aimed to investigate soft tissue chin profiles in clinically acceptable facial aesthetics using a three-dimensional camera system, comparing with traditional two-dimensional cephalometric values. …
Oral Health-Related Quality Of Life, Patient’S Satisfaction And The Clinical Performance Of Anterior Ceramic Veneers Criteria In 10 Years Clinical Cross-Section Study, Thitiorn Panayong
Oral Health-Related Quality Of Life, Patient’S Satisfaction And The Clinical Performance Of Anterior Ceramic Veneers Criteria In 10 Years Clinical Cross-Section Study, Thitiorn Panayong
Chulalongkorn University Theses and Dissertations (Chula ETD)
Objectives: The purpose of this study was to evaluate the clinical performance of ceramic veneers after 9-10 years, assess oral health-related quality of life and patient’s satisfaction, and examine the associations between them. Materials and Methods: 30 patients who treated with ceramic veneers aged 9 to 10 years were recalled for a clinical examination. Each participant completed a questionnaire on satisfaction and oral health-related quality of life, using the Oral Impact on Daily Performance (OIDP) scale. The Chi-square or Fisher Exact test was used to assess associations between tooth position and professional evaluations of veneer success and individual items. Consistency …