Dentistry Commons^™

Evaluation Of A No-Code Ai Model For Detecting Periapical Radiolucencies: Impact Of Anatomical Region On Diagnostic Performance, Manal Hamdan, Kevin W. Yu, Marguerite Miller, Stephanie J. Sidow, Zaid Badr, Sergio E. Uribe

School of Dentistry Faculty Research and Publications

Background

To develop a no-code artificial intelligence (AI) model for the detection of apical radiolucent lesions and to assess how lesion location influences the model’s diagnostic performance.

Methods

312 periapical radiographs were retrospectively collected, each accompanied by a corresponding cone-beam computed tomography (CBCT) scan obtained within six months and a radiology report authored by board-certified oral and maxillofacial radiologists. These reports served as the reference standard, and all findings were cross-verified by the primary investigator through CBCT review. The dataset included 181 images with at least one apical radiolucent lesion and 131 lesion-free controls. Using the no-code AI platform LandingLens …

The Accuracy Of Occlusal Splint Fabricated By The Different Materials With Different 3d Printers., Supisara Thamrongsak

Master's Theses (2009 -)

Aim: The purpose of this study is to evaluate the accuracy of occlusal splints fabricated by the different materials with different 3D printers in four different orientations (0°, 15°, 25°, 40°) using surface matching software. Materials and Methods: Occlusal splints were printed in 4 different orientations including 0°, 15°, 25°, and 40° based on the STL file of the designed occlusal splint with 3 different printers (Carbon® M3Max, SprintRay Pro S, Asiga Pro4K). A total of 120 occlusal splints were printed for the present study, 10 occlusal splints were printed for each group. Then all occlusal splints were scanned using …

Patient Perception Of Pain Following Extraction And Bone Graft With Or Without Preemptive Ibuprofen: A Randomized Clinical Trial, Samah Rady

Master's Theses (2009 -)

Objective: The purpose of this randomized clinical trial is to investigate the effects of preemptive analgesia on postoperative pain following extraction and ridge preservation and to evaluate the association between dental care-related fear and anxiety, health literacy, fear of pain, and pain catastrophizing with post-operative pain and swelling perception as well as Oral Health Impact Profile-14 (OHIP-14). Materials and Methods: Ibuprofen 600mg (test; n=9) or placebo (n=13) were randomly given one hour prior to extraction and ridge preservation. Preoperatively, patients completed the following questionnaires: Modified Dental Anxiety Scale (MDAS), Oral health-related quality of life (OHIP-14), Fear of Pain (FPQ-III), Pain …

The Influence Of The Timing Of Definitive Restoration Placement After Root Canal Completion: A 22-Year Retrospective Study, Shikha Gupta

Master's Theses (2009 -)

Objective: To evaluate how the time interval between root canal obturation and the placement of a definitive restoration impacts the incidence of tooth failure, defined as non-surgical retreatment, apical surgery, or extraction. Methods: This 22-year-retrospective cohort study utilized electronic health records from the Marquette University School of Dentistry (MUSoD) axiUm database, analyzing 11,002 teeth treated between 2004 and 2026. Inclusion criteria required patients to be at least 18 years of age, categorized as established patients of record, with all non-surgical root canal treatments (NSRCT) meeting the 2020 AAE quality standards. The interval between obturation and restoration was categorized into seven …

Occupational Therapy And Periodontics Collaboration To Improve Hand Health And Fine Motor Skills In Dental Student, Zainab Alsuwaiyan

Master's Theses (2009 -)

Background: A study conducted in 2023 by the Occupational Therapy (OT) Department and Marquette University school of dentistry (MUsoD) demonstrated that many student participants scored below average on hand function testing, indicating a need for occupational therapy intervention. Objective: The purpose of this study was to evaluate the effectiveness of occupational therapy–led training for periodontics and registered dental hygienist faculty on the performance of dental students in the Introduction to Clinical Practice course (DEIN 7114). Methods: Faculty teaching in DEIN 7114 were recruited for this study. They participated in educational sessions led by occupational therapy faculty focusing on musculoskeletal disorders …

Long-Term Effect Of Ammonia- And Water-Based Silver Fluoride On Dentin Collagen Matrix, Merve Uctasli, Roda Seseogullari-Dirihan, Thiago Henrique Scarabello Stape, Mustafa Murat Mutluay, Arzu Tezvergil-Mutluay

School of Dentistry Faculty Research and Publications

Objective

To evaluate the long-term effect of ammonia- and water-based silver fluoride treatments on the degradation of the dentin collagen matrix.

Methods

Dentin beams (0.3x3x7mm) were demineralized (10 % H₃PO₄), rinsed and randomly distributed into six groups. Groups (n = 10 beams/group) were treated with (1) ammonia-based silver fluoride = SDF; (2) SDF + potassium iodide = KI (3) water-based silver fluoride = SF (4) SF + KI (5) KI (6) untreated demineralized dentin beams served as control. Following treatments, dry mass, modulus of elasticity and enzymatic activity were assessed. Dentin beams were incubated in calcium- …

Three-Dimensional Displacement Of Upper Cervical Vertebrae In Severe Mandibular Deviation Caused By Condylar Hyperplasia: A Tomographic Segmentation Study, Claudia Milena Ramírez, Rodrigo Cárdenas-Perilla, Luis Eduardo Almeida, Diego Fernando López

School of Dentistry Faculty Research and Publications

Objective: To evaluate the three-dimensional (3D) angular displacement (Roll, Yaw, and Pitch) of the upper cervical vertebrae (C1, C2, and C3) in patients with severe mandibular deviation (MD) due to condylar hyperplasia (CH), utilizing a computed tomography (CT)-based segmentation approach. Methods: This retrospective cross-sectional study included 50 patients with MD ≥ 6 mm caused by hemimandibular elongation (HE) or a hybrid form (HF) of CH. The skull, mandible, and cervical vertebrae (C1–C3) were segmented using 3D Slicer software. Angular deviations (Pitch, Yaw, Roll) were measured relative to the Frankfurt plane. Patients were categorized by the side of CH (right or …

Cytotoxicity Of Ammonia- And Water-Based Silver Fluoride Treatments, Merve Uctasli, Roda Seseogullari-Dirihan, Mustafa Murat Mutluay, Arzu Tezvergil-Mutluay

School of Dentistry Faculty Research and Publications

This study aims to investigate the trans-dentinal and direct cell viability of ammonia- and water-based silver fluoride treatments. Deep dentin discs were prepared, balanced for permeability and autoclaved. Three-dimensional cultures of odontoblast-like cells were transferred to the pulpal aspect of the dentin slices inside perfusion split chambers designed for dentin-barrier cytotoxicity test, following ISO 7405. An experimental resin-based glass ionomer cement and a polyvinylsiloxane impression material served as positive and negative controls, respectively. The experimental treatments included: (i) ammonia-based silver fluoride = SDF, (ii) SDF + potassium iodide = KI, (iii) water-based silver fluoride = SF, and (iv) SF + …

Impacts Of Artificial Intelligence On Computed Tomography In Endodontics: An Integrative Review, Camila Da Silva Fagundes, Ana Ligya Monteiro Soares, Fabiofederal University Of Paraíba Luiz Cunha D'Assuncao, Elsbeth Kalenderian, Claudia Batista Melo

School of Dentistry Faculty Research and Publications

Background. Artificial Intelligence (AI), defined as systems capable of replicating human tasks aimed at performing complex tasks and supporting decision-making, is entering the field of Dentistry, standing out with its application in research and clinical practices, such as diagnosis using Cone Beam Computed Tomography. The objective of this study is to identify and organize scientific evidence related to the use of Artificial Intelligence in computed tomography as an advanced resource in Endodontics.

Materials and methods. This study is an integrative review, structured in well-defined steps, namely: formulation of the guiding question, selection of inclusion and exclusion criteria, identification of descriptors …

Structure-Activity Relationships Of A–And B-Type Proanthocyanidins In Long-Term Dentin Biomodification And Biocompatibility, Yvette Alania, Mariana Reis-Havlat, Shu-Xi Jing, Fahimeh Tabatabaei, James B. Mcalpine, Shao-Nong Chen, Guido F. Pauli, Ana K. Bedran-Russo

School of Dentistry Faculty Research and Publications

Objective

To explore the structure-activity relationships of plant-based proanthocyanidins (PACs) with dental pulp stem cells (DPSCs) and the long-term biomechanical stability of PAC-modified dentin extracellular matrix (ECM).

Methods

Mid-coronal dentin ECM (n= 8) was treated with eight PAC tetramers and trimers with varying A-/B-type linkages. Chemo-mechanical analyses included dynamic mechanical analysis and ATR-FTIR spectroscopy. Viscoelastic components were calculated after PAC biomodification, 18-month incubation, and protein destabilization. Collagen structure was assessed via IR amide absorbance ratios. DPSCs were cultured with PACs at different concentrations (100, 10, and 1 μg/mL) to measure proliferation. ANOVA and post-hoc tests were used for …

Evaluating Dental Ai Research Papers: Key Considerations For Editors And Reviewers, Sergio E. Uribe, Manal H. Hamdan, Nicola Alberto Valente, Satoshi Yamaguchi, Fahad Umer, Antonin Tichy, Ruben Pauwels, Falk Schwendicke

School of Dentistry Faculty Research and Publications

Objective

Artificial intelligence (AI) is increasingly used in dental research for diagnosis, treatment planning, and disease prediction. However, many dental AI studies lack methodological rigor, transparency, or reproducibility, and no dedicated peer-review guidance exists for this field.

Methods

Editors and reviewers from the ITU/WHO/WIPO AI for Health – Dentistrygroup participated in a structured survey and group discussions to identify key elements for reviewing AI dental research. A draft of the recommendations was circulated for feedback and consensus.

Results

The consensus from editors and reviewers identified four key indicators of high-quality AI dental research: (1) relevance to a real clinical …

Color Change In Commercial Resin Composites With Different Photoinitiators, Feng Gao, David W. Berzins

School of Dentistry Faculty Research and Publications

The yellowing effect of camphorquinone (CQ) has led manufacturers to add alternative initiators into resin composites (RCs) to reduce the amount of CQ used. The aim of this study was to investigate the color change in commercial RCs with alternative photoinitiators besides CQ. Color change upon polymerization and aging in air and artificial saliva for up to 3 months was tested for seven commercial RCs (traditional and bulk-fill) with either CQ only or CQ and additional photoinitiators (CQ+). Color measurements were obtained with a spectrophotometer. Color change (ΔE) was calculated using the CIELab and CIEDE2000 formulae. ANOVA and a post …

Corrigendum To “A Compound Of Concentrated Growth Factor And Periodontal Ligament Stem Cell-Derived Conditioned Medium” [Tissue Cell 65 (2020) 101373], Z. Aghamohammadi, M. Kadkhodazadeh, M. Torshabi, Fahimeh Tabatabaei

School of Dentistry Faculty Research and Publications

No abstract provided.

Pre-Emptive Analgesia For Periodontal And Implant-Related Surgery: A Systematic Review And Meta-Analysis, Christos Gousias, Zainab Alsuwaiyan, Alissa Fial, Shengtong Han, Dimitris N. Tatakis, Vrisiis Kofina

Library Faculty Research and Publications

Objective

This systematic review aimed to answer the question: In patients undergoing periodontal and peri-implant surgery, gingival augmentation, implant site development or placement, are pre-emptive analgesics effective in controlling post-operative pain compared with patients not receiving pre-emptive medications?

Materials and Methods

After comprehensive electronic and manual literature searches, randomised placebo-controlled clinical trials on adults undergoing the aforementioned surgeries were included. A meta-analysis was performed comparing pain (standardised mean difference) between pre-emptive medication and placebo at post-operative hours 1, 3, 6, 8, 24 and 72.

Results

Two reviewers screened 1995 titles, included 18 studies in the systematic review (open flap debridement, …

Genotoxicity Assessment Of Conventional And Cad/Cam Denture Base Materials, Alanood Aldubayan

Master's Theses (2009 -)

Aim: In prosthodontics, polymethyl methacrylate (PMMA) has been widely used. Their biocompatibility and potential genotoxicity remain a concern due to the residual monomer release. Computer-aided design and manufacturing (CAD/CAM) denture base materials have emerged and offered some improved mechanical and physical properties compared to the standard conventional heat-cured denture base material. However, their long-term biocompatibility remains unstudied. Therefore, this study evaluates the genotoxicity effects of conventional and CAD/CAM denture base materials on human gingival fibroblasts (HGFs). Methodology: Disk-shaped samples were fabricated of six denture base resins, including heat-cured PMMA, milled PMMA, and four 3D-printed resins. HGFs were exposed to the …

Comparing The Mechanical Properties Of Conventional, Milled, And 3d-Printed Occlusal Splint Materials: An In Vitro Study, Sadeem Alzaghran

Master's Theses (2009 -)

Aim: Evidence on the mechanical properties of digitally manufactured occlusal splint materials remains scarce. The aim of this study was to evaluate and compare the mechanical properties of CAD/CAM fabricated occlusal splint materials versus conventionally heat-cured acrylic resin materials. Materials and Methods: A total of 100 specimens were manufactured for the present study. One CAD-CAM milled (ProArt CAD Splint), one heat-polymerized (SR IVOcap Clear), and three 3D-Printed (KeySplint Hard, NightGuard Firm2 and RoDIN Splint 2.0) resin materials were evaluated. Flexural strength, flexural modulus and surface hardness were measured. The three-point flexure test was used for the determination of flexural strength …

Comparison Of Leveling A Deep Curve Of Spee With Extractions Versus Non-Extraction: A Biomechanical Perspective, Mitchell James Muller

Master's Theses (2009 -)

Introduction: This study evaluated and compared orthodontic forces from different archwire designs and materials used to correct a deep curve of Spee. Methods: A three-dimensional orthodontic force tester (OFT) was used to measure forces and moments exerted by archwires on brackets from central incisors to first molars. Two setups were tested: one with a full dentition from central incisor to first molar, and another simulating bicuspid extractions with the first premolar removed. Dentoform models representing a deep curve of Spee were created using cone-beam computed tomography (CBCT) data. The setup employed 0.022 × 0.028-inch zero-prescription brackets secured with elastomeric ligatures. …

Low-Magnitude High-Frequency Mechanical Vibration Enhances Osteogenesis In Human Pdl Cells Through Piezo1 Ion Channel, Mina Oh

Master's Theses (2009 -)

ABSTRACT LOW-MAGNITUDE HIGH-FREQUENCY MECHANICAL VIBRATION ENHANCES OSTEOGENESIS IN HUMAN PDL CELLS THROUGH PIEZO1 ION CHANNEL Mina Oh, D.M.D Marquette University, 2025 Introduction: Low-magnitude high-frequency (LMHF) mechanical vibration has been shown to enhance osteogenesis in various osteogenic tissues and cells, including periodontal ligament (PDL) cells, however its effectiveness remains relatively low. The Piezo1 mechanosensitive ion channel plays a critical role in mechanotransduction, however its specific involvement in the LMHF-induced osteogenesis is unknown. This study aims to elucidate the role of Piezo1 in mediating osteogenic responses in human PDL cells subjected to LMHF mechanical vibration. Materials and Methods: Human PDL cells were …

Electrochemical Properties Of Rhodium-Plated Esthetic Orthodontic Archwires, Michael Hoy

Master's Theses (2009 -)

Objective: Esthetics are becoming more important to patients with increased desire for ceramic brackets as they go through orthodontic treatment. Despite ceramic brackets offering an esthetic option for patients, traditional metal wires are still most commonly being used. Very little research on rhodium plated wires, specifically the American Orthodontics Iconix Aesthetic Arch Wire, exists in the literature with no tests of corrosion through electrochemical testing. The objective of this research is to analyze how rhodium plating affects the electrochemical properties of nickel-titanium (NiTi) orthodontic wires. Methods: Rhodium-plated NiTi orthodontic wires (Iconix Aesthetic; American Orthodontics) and non-plated NiTi orthodontic wires (NT3 …

Comparison Of Shear Bond Strength Of New And Rebonded Symetri™ Clear Ceramic Brackets, Ciara Schwarz

Master's Theses (2009 -)

Objective: The purpose of this study was to compare the shear bond strength of the Symetri™ Clear brackets bonded initially to enamel versus after rebonding. An additional aim was to see how a generic debond pliers compares to the Symetri™ Debonding pliers in terms of shear bond strength and bracket morphology after debond. Methods: Sixty extracted premolars and nine extracted canines were collected and stored in 1% Chloramine T solution. The canines were used for a pilot study to test methodology. The premolars were randomly assigned to one of three Groups: Group 1 (single bond), Group 2A (debond with Symetri™ …

Quality Of Life Outcomes Following Total Temporomandibular Joint Replacement: A Systematic Review Of Long-Term Efficacy, Functional Improvements, And Complication Rates Across Prosthesis Types, Luis Eduardo Almeida, Samuel Zammuto, Louis G. Mercuri

School of Dentistry Faculty Research and Publications

Introduction:

Total temporomandibular joint replacement (TMJR) is a well-established surgical solution for patients with severe TMJ disorders. It aims to relieve chronic pain, restore jaw mobility, and significantly enhance quality of life. This systematic review evaluates QoL outcomes following TMJR, analyzes complication profiles, compares custom versus stock prostheses, explores pediatric applications, and highlights technological innovations shaping the future of TMJ reconstruction.

Methods:

A systematic search of PubMed, Embase, and the Cochrane Library was conducted throughout April 2025 in accordance with PRISMA 2020 guidelines. Sixty-four studies were included, comprising 2387 patients. Results: Primary outcomes assessed were QoL improvement, pain reduction, and …

Evaluating Artificial Intelligence Chatbots For Patient Education In Oral And Maxillofacial Radiology, Dilek Helvacioglu-Yigit, Husniye Demirturk, Kamran Ali, Dania Tamimi, Lisa J. Koenig, Abeer Almashraqi

School of Dentistry Faculty Research and Publications

Objective

This study aimed to compare the quality and readability of the responses generated by 3 publicly available artificial intelligence (AI) chatbots in answering frequently asked questions (FAQs) related to Oral and Maxillofacial Radiology (OMR) to assess their suitability for patient education.

Study Design

Fifteen OMR-related questions were selected from professional patient information websites. These questions were posed to ChatGPT-3.5 by OpenAI, Gemini 1.5 Pro by Google, and Copilot by Microsoft to generate responses. Three board-certified OMR specialists evaluated the responses regarding scientific adequacy, ease of understanding, and overall reader satisfaction. Readability was assessed using the Flesch-Kincaid Grade Level (FKGL) …

Ensuring Integrity In Dental Education: Developing A Novel Ai Model For Consistent And Traceable Image Analysis In Preclinical Endodontic Procedures, Mohamed Ibrahim, Meisam Omidi, Arndt Guentsch, Joseph Gaffney, Jennifer Talley

School of Dentistry Faculty Research and Publications

Aim

Academic integrity is crucial in dental education, especially during practical exams assessing competencies. Traditional oversight may not detect sophisticated academic dishonesty methods like radiograph substitution or tampering. This study aimed to develop and evaluate a novel artificial intelligence (AI) model utilizing a Siamese neural network to detect inconsistencies in radiographic images taken for root canal treatment (RCT) procedures in preclinical endodontic courses, thereby enhancing educational integrity.

Methododology

A Siamese neural network was designed to compare radiographs from different RCT procedures. The model was trained on 3390 radiographs, with data augmentation applied to improve generalizability. The dataset was split into …

Periodontal Diseases In Africa, Mojisola Olujitan, Patricia O. Ayanbadejo, Kehinde Umeizudike, Afolabi Oyapero, Christopher Okunseri, Azeez Butali

School of Dentistry Faculty Research and Publications

Periodontal diseases, a group of complex conditions marked by an excessive immune response and periodontal tissue destruction, are a global health concern. Since 1990, the incidence of these diseases has doubled, with Western sub-Saharan Africa experiencing the highest burden. Accurate diagnosis and case identification are crucial for understanding the etiology, features of disease, research, treatment and prevention. Modern perspectives on periodontal disease classification are based on commonality among those affected. However, current literature is often plagued by methodological inconsistencies and focused on disease mechanisms in European populations. Health inequalities in low- and middle-income countries (LMICs) are exacerbated by these challenges, …

Comparison Of Hand-Wrist And Cvms Methods For Craniofacial Growth Spurt Assessment, Ardita Ajvazi

Master's Theses (2009 -)

Objective: Hand-wrist (HW) radiographs are considered the most accurate method for assessing pubertal growth spurts in orthodontics but have declined in use due to added radiation exposure and the expertise required. Cervical vertebral maturation staging (CVMS) is now commonly used, given the routine availability of lateral cephalograms. However, the validity of CVMS remains uncertain. A recent study reported only 66% inter-observer reliability across time periods (Ingersoll, 2024). This follow-up study aims to evaluate CVMS as a predictor of growth to guide clinical decision-making. Methods: With protocol approval (MU HR-4695), this retrospective study followed a design modeled after a prior study …

Exploring The Potential Of No-Code Artificial Intelligence In Identifying Periapical Radiolucent Lesions, Marguerite Miller

Master's Theses (2009 -)

ABSTRACT EXPLORING THE POTENTIAL OF NO-CODE ARTIFICIAL INTELLIGENCE IN IDENTIFYING PERIAPICAL RADIOLUCENT LESIONS Marguerite Miller, D.M.D. Marquette University, 2025 Title: Exploring the Potential of No-Code Artificial Intelligence in Identifying Periapical Radiolucent Lesions. Objective: To employ a no-code platform for the development of an AI model designed to identify periapical radiolucent lesions using periapical radiographs. Methods: Three hundred twelve periapical radiographs were retrospectively collected, along with corroborating cone-beam computed tomography (CBCT) volumes and radiology reports obtained within six months. Radiology reports from board-certified oral and maxillofacial radiologists, were used as the reference standard for labeling the periapical radiographs. Among these, 180 …

Long-Term Bone Changes At Edentulous Sites, Teerarat Neal Phuatrakoon

Master's Theses (2009 -)

BACKGROUND: Tooth loss is a debilitating occurrence that may affect the patient’s emotional and mental well-being. Delays in necessary restorative treatment may occur dependent on the patient’s finances or other elaborate dental treatment plans. Prosthetically guided implants have become the standard of care regarding definitive treatment, however there is a lack of evidence discussing the stability of edentulous sites if deferment of treatment is required. OBJECTIVE: The aim of this study is to measure long-term changes of the edentulous alveolar ridge (height and width) and anatomical structures (e.g. sinus floor, inferior alveolar canal). METHODS: Charts of patients with at least …

Comparison Of Hand-Wrist And Cvms Methods For Craniofacial Growth Spurt Assessment, Ardita Ajvazi

Master's Theses (2009 -)

Objective: Hand-wrist (HW) radiographs are considered the most accurate method for assessing pubertal growth spurts in orthodontics but have declined in use due to added radiation exposure and the expertise required. Cervical vertebral maturation staging (CVMS) is now commonly used, given the routine availability of lateral cephalograms. However, the validity of CVMS remains uncertain. A recent study reported only 66% inter-observer reliability across time periods (Ingersoll, 2024). This follow-up study aims to evaluate CVMS as a predictor of growth to guide clinical decision-making. Methods: With protocol approval (MU HR-4695), this retrospective study followed a design modeled after a prior study …

Long-Term Assessment Of Skeletal And Dental Asymmetry After Conventional And Mini-Implant-Assisted Rapid Palatal Expansion, Brett Barton, Shea Jamieson, Marinho Del Santo Jr, Manuel Lagravere Vich, Dawei Liu, Sumit Yadav, Shivam Yogesh Mehta

School of Dentistry Faculty Research and Publications

Introduction

This study aimed to evaluate the short-term and long-term skeletal and dental asymmetry with miniscrew-assisted rapid palatal expansion (MARPE), rapid palatal expansion (RPE), and control group using cone-beam computed tomography (CBCT) analysis.

Methods

A total of 180 CBCT scans were analyzed for 60 patients divided into 3 groups: MARPE (mean age 13.7 ± 1.74 years), RPE (mean age 13.9 ± 1.14 years), and control (mean age 13.3 ± 1.49 years). CBCT scans were recorded at 3 points: pretreatment (T1), postexpansion (T2), and posttreatment (T3). The anterior nasal spine, posterior nasal spine, zygomaticomaxillary point, anterior nasal cavity width, posterior nasal …

Effect Of Surface Conditioning On The Adhesive Bond Strength Of 3d-Printed Resins Used In Permanent Fixed Dental Prostheses, Marco Dederichs, Zaid Badr, Stephanie Viebranz, Sandor Nietzsche, Ulrike Schulze-Spate, Anne-Sophie Schmelzer, Thomas Lehmann, Arndt Guentsch

School of Dentistry Faculty Research and Publications

Objectives

Although pre-treatment parameters for subtractive computer-aided design/computer-aided manufacturing (CAD/CAM) materials have been thoroughly investigated, data regarding additive restorative materials designed for permanent use in the oral cavity are scarce. This study investigated the effects of abrasive materials and blasting pressure on the bond strength of 3D-printed resins used in permanent restorations.

Methods

A total of n = 44 test specimens additively manufactured from Formlabs’ `Permanent Crown Resin' were prepared. Three groups with n = 11 specimens were airborne-particle abraded with 50 µm aluminium oxide at 1 bar, 2 bar or 3 bar. The control group did not receive any …