Medicine and Health Sciences Commons^™

Virginia Dental Journal (Vol. 95, No. 4, 2018)

Virginia Dental Journal

No abstract provided.

Accuracy Of A Smartphone-Based Orthodontic Treatment Monitoring Application, Heather Moylan

Theses and Dissertations

Objectives: Dental Monitoring® (“DM,” Dental Monitoring, Paris, France), is a cloud-based software that allows orthodontists to track patients’ treatment remotely. The purpose of this study was to investigate the accuracy of the software in making linear measurements.

Methods: Patients took intraoral photographs using the DM application, immediately followed by impressions for plaster models. Intercanine and intermolar width and arch depth measurements were made by DM and compared to measurements made on the plaster models. Data was analyzed using two one-sided t-tests for equivalence with equivalence bounds of

+/-0.5mm. Significance level was set at 0.05.

Results: Thirty sets of measurements were …

Evaluation Of Micro Leakage Of Root Canals Filled With Different Obturation Techniques: An In Vitro Study, Maham Muneeb Lone, Farhan Raza Khan

Section of Dental-Oral Maxillofacial Surgery

Background: Despite a plethora of studies done comparing different obturation techniques using gutta-percha, there is no consensus as to which obturation technique results in a 'better' sealing of root canal space. Aims of the study are to compare mean apical micro leakage in root canals of extracted teeth obturated with cold laterally compacted gutta-percha and thermoplasticised injectable gutta-percha using calcium hydroxide based sealer.
Methods: It was an in-vitro experimental study carried out using extracted teeth. After access cavity preparation and canal preparation in 70 teeth, they were randomly divided into 2 groups and filled with two different obturation …

Factors Affecting Treatment Duration - A Dilemma In Orthodontics, Saman Faruqui, Mubassar Fida, Attiya Shaikh

Section of Dental-Oral Maxillofacial Surgery

Background: One of the first concerns of new orthodontic patients, apart from the outcome, is the duration of treatment. A better understanding of orthodontic treatment duration as well as factors affecting the treatment duration is useful for efficient patient counselling and improved clinical practice. Hence, the objectives of this study are to compare the treatment durations of subjects with Class I and Class II division 1 (II/1) malocclusions, and to identify the factors affecting the treatment duration of these malocclusions.

Methods: This was a chart review conducted in the orthodontic department of the Aga Khan University Hospital, Karachi. …

Evaluation Of Micro Leakage Of Root Canals Filled With Different Obturation Techniques: An In Vitro Study, Maham Muneeb Lone, Farhan Raza Khan

Section of Dental-Oral Maxillofacial Surgery

Background: Despite a plethora of studies done comparing different obturation techniques using gutta-percha, there is no consensus as to which obturation technique results in a 'better' sealing of root canal space. Aims of the study are to compare mean apical micro leakage in root canals of extracted teeth obturated with cold laterally compacted gutta-percha and thermoplasticised injectable gutta-percha using calcium hydroxide based sealer.
Methods: It was an in-vitro experimental study carried out using extracted teeth. After access cavity preparation and canal preparation in 70 teeth, they were randomly divided into 2 groups and filled with two different obturation …

Dentin Microshear Bond Strength Of Various Luting Agents To Zirconia-Reinforced Lithium Silicate Ceramics, Natthapong Itthipongsatorn

Chulalongkorn University Theses and Dissertations (Chula ETD)

Statement of problem. Performance of adhesive and resin luting cements used to bond zirconia-reinforced lithium silicate ceramics (ZLS) to dentin has not been well established. Purpose. To examine microshear bond strength (µSBS) of etch-and-rinse adhesive system, universal adhesive and self-adhesive resin cement that were used to bond ZLS to dentin. Material and Methods. Vita Suprinity® (VS, Vita Zahnfabrik) and Celtra® Duo (CD, Dentsply Sirona) blocks were sectioned into 36 and 72 microbars (1×1×3 mm3) respectively. All VS were crystallized, while half of CD were additionally fired and defined as fired-Celtra® Duo (FCD). The others were defined as unfired-Celtra® Duo (UCD). …

The Peri-Implant Soft Tissue Reactions And Cytokine Expressions Around Different Abutment Materials : Randomized Controlled Clinical Trial, Prapaphan Jaikla

Chulalongkorn University Theses and Dissertations (Chula ETD)

Objectives : Stable peri-implant soft tissue around transmucosal zone are the crucial factor for long-term success and survival of dental implants. The aim of this study was to evaluate the expression of proinflammatory cytokines and chemokine around 3 types of abutment materials : titanium (Ti), zirconium oxide (Zr) and gold alloy (Au). Methodology : 15 dental implants were enrolled in this study. Clinical parameters and peri-implant crevicular fluid (PICF) were collected at weeks 4, 6, 8 and 10. The soft tissue characteristics were demonstrated using plaque assessment score and mucosal condition score. Cytokine levels were determined by enzyme-linked immunosorbent assay …

Effect Of Different Polishing Systems, Forces, And Durations On Surface Roughness And Phase Transformation Of Monolithic Zirconia, Songsak Munkongsujarit

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study aimed to determine the effect of polishing systems, forces and durations on the surface roughness and phase transformation of zirconia. 72 pieces of fully sintered zirconia size 7 x 5 x 4 mm were fabricated with CAD/CAM, then divided into nine groups depending on the polishing systems and forces. All specimens were ground with fine diamond bur as the control, and initial surface roughness (Ra) was measured. The samples were then polished with one of the zirconia polishing systems (Diazircon or Komet ZR) or porcelain polishing system (Ceramaster), with forces at 1, 2 and 3 newtons. The polishing …

Gene Expression Of Bcl2a1 และ Cxcl9 In Soft Tissue Covering Bone Grafting Materials, Borwonluk Taveedach

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study was to assess the expression of Bcl2a1 and Cxcl9 genes in soft tissues covering bone grafted with demineralized freeze-dried bone allograft (DFDBA) and deproteinized bovine bone mineral (DBBM) in comparison with ones covering without grafting. The animals were randomly separated into three groups of treatment. Calvarial defect models were created on parietal bones. Bare defect models without bone graft as a control group. After one and three months, animals were sacrificed. Soft tissues covering the defected area were collected by punch technique. RNA was isolated and proceeded to Real-time reverse transcription quantitative polymerase chain reaction (RT-qPCR). Statistical analysis …

Fracture Resistance Of Non-Ferruled Endodontically Treated Teeth Restored With Different Fiber Post And Core Methods After Five Years Fatigue Loading, Puriwat Malakorn

Chulalongkorn University Theses and Dissertations (Chula ETD)

The aim of this study was to compare the fracture resistance and failure mode of non-ferruled ETT restored with different fiber post and core methods after five years in vitro fatigue loading. Forty-eight uniradicular lower first premolar teeth were decoronated, endodontically treated and prepared for the post space. The prepared specimens were divided into four groups (n=12): single fiber-reinforced composite (FRC) post and flowable resin composite core (Group I), FRC post with an accessory fiber post and flowable resin composite core (Group II), resin composite relined FRC post and resin composite core (Direct anatomic post)(Group III), and resin composite relined …

Fracture Resistance Of Occlusal Ceramic And Composite Molar Onlay Comparing To Lithium Disilicate Molar Crown, Jatuporn Luekiatpaisarn

Chulalongkorn University Theses and Dissertations (Chula ETD)

Purpose: This in vitro study evaluated fracture strengths and failure modes of thin occlusal onlays fabricated from direct resin composite, CAD/CAM polymer-infiltrated ceramic-network, and CAD/CAM lithium-disilicate glass ceramic under compressive loading. Materials and Methods: Forty extracted maxillary molars were prepared, including occlusal enamel and dentin removal, leaving two dentin slopes with peripheral enamel. Thirty teeth were restored with 0.6-mm-thick occlusal onlays using direct resin composite (Premise), CAD/CAM polymer-infiltrated ceramic-network (Vita Enamic), and CAD/CAM lithium-disilicate glass ceramic (IPS e.max CAD). Others were restored with IPS e.max CAD crowns. All restored teeth were loaded vertically by means of a universal testing machine. …

The Dislodgement Of The Sponge Head Of Novel Thai-Produced Sponge Brushes, Nawachat Meechumna

Chulalongkorn University Theses and Dissertations (Chula ETD)

Objective. To perform an in vitro investigation on the dislodgement of sponge head of different manufactured sponge brushes (Sakura shape, Sunstar BUTLER, Japan, and 4 novel Thai-produced sponge brushes; combination of two shapes (round and Leelawadee) and two textures (soft and hard), King Dental Innovation Foundation; KDIF , Thailand. Methods. In order to evaluate the dislodgement of sponge head, strength test measurement was performed according to ISO 20126:2012(E). Five types of polyurethane foam were characterized using Fourier transform infrared spectroscopy (FTIR). The density of the foam was evaluated as the weight of foam in the air per unit volume of …

Clinical And Histomorphometric Outcomes Following The Use Of Small Versus Large Particle Sized Bone Allografts In Ridge Preservation Procedures: A Randomized Clinical Trial, Gentiane Valiquette

All ETDs from UAB

Alveolar ridge preservation at the time of tooth extraction is a commonly performed procedure as it significantly minimizes ridge resorption and allows for more optimal implant placement. The amount of new vital bone has been shown to vary with the use of different types of bone replacement grafts, however, the effect of bone graft particle size on the outcomes following ridge preservation has not been elucidated in the scientific literature. The present randomized clinical trial compared clinically, radiographically and histomorphometrically the use of small- (0.25-1.0mm) versus large- (1.0- 2.0mm) sized particle mineralized cortico-cancellous bone freeze-dried bone allografts (FDBAs) in ridge …

Fracture Strength Of Translucent Zirconia Crowns, Carlos Alberto Jurado

All ETDs from UAB

ABSTRACT Objectives: To measure and compare crown fracture load of a new translucent zirconia. Methods: 72 Standarized crown preparations were designed with AutoCAD software with a 0.8mm shoulder margin and 1 mm incisal-cervical marginal curvature. A stylized crown with a 1mm thickness and 0.8mm minimum thickness in the central pit was designed in 3shape software. Tooth dies were milled out of a resin composite (Crystal Ultra) that has a similar modulus as dentin (Modulus 10 GPa). Crowns were fabricated and prepared into the following groups: 24 crowns of translucent zirconia (Lava Esthetic, 3M), 8 bonded with resin cement (Group 1), …

The Effect Of Primary Palatal Repair On Growth In Cleft Lip And Palate Patients, Nadia Abou Kheir

All ETDs from UAB

Cleft lip and palate (CLP) is a facial defect that is represented as a split in the mouth, palate or both. In the United States approximately 4440 babies are born with CLP annually. More than US$600 million are spent on their treatment and mostly on surgical interventions. Considering the high expenses of primary palatal repair, its effect on growth has been controversial. Surgical scaring is postulated as the cause of maxillary hypoplasia. However, this operation has been considered necessary for function and development of speechHowever, this operation has been considered as necessary for better functional and speech outcomes. Materials and …

Evaluation And Comparison Of Child And Adolescent Mallampati Scores, Diana Bozner

All ETDs from UAB

Objectives: The purpose of this study is to investigate clinical assessments that may help to predict pediatric obstructive sleep apnea (OSA). These clinical tools include the Mallampati and Brodsky classifications, as well as the Epworth Sleepiness Scale for Children and Adolescents (ESS-CHAD). The specific aims of this study are to: 1.) Compare the Mallampati scores, Brodsky scores, and results of the ESS-CHAD of children versus adolescents in order to observe how these criteria change with age. 2.) Compare the Mallampati scores derived by a dental student, an orthodontic resident and a pediatric otorhinolaryngologist (ENT) to determine the accuracy of this …

A Comparison Of The Antimicrobial Efficacy Of Silver Diamine Fluoride And Silver Nitrate: An Ex Vivo Study, Reham M. Alnajjar

Theses and Dissertations

A comparison of the antimicrobial efficacy of silver diamine fluoride and silver nitrate on various cariogenic bacteria: an ex vivo study By: Reham AlNajjar, D.D.S.

A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Dentistry at Virginia Commonwealth University. Virginia Commonwealth University, 2019

Thesis Advisor: William Dahlke, D.M.D., Associate Professor and Chair of Pediatric Dentistry, School of Dentistry

Purpose: The use of silver-based antimicrobials is an emerging method for the treatment of dental caries. In this study, the authors compare the efficacy of the two most prominent silver- based therapeutics, silver diamine …

Aadej Comm 49 2 2018

AADEJ - The Communicator

The Communicator is the official journal of the American Association of Dental Editors and Journalists (AADEJ). It is published quarterly, distributed digitally via email to members, and posted on the Association’s website, AADEJ.org. Each issue includes regular updates from the editorial team and AADEJ board, as well as feature articles on current issues in the field.

Endodontic Post Retention With Resin Cements (Ilumi Fiber Post), Faimeena Farheen

All ETDs from UAB

Objectives: Loss of post retention is the leading cause in the cemented post. There is no good method of bonding a fiber post in a post space with resin cements because adhesive cementation into a prepared post space is difficult- due to an inability to place, dry and light cure the adhesive and the cement. A new post system (iLumi) that transmits light to the apex of the post has recently been developed. We want to know if this system will improve post retention in each section (coronal, middle and apical) of the prepared post space and if this curing …

A Randomized Trial To Evaluate The Effect Of Allograft Bone Particle Size On Histomorphometric And Clinical Outcomes Following Ridge Augmentation Procedures, Hussein Basma

All ETDs from UAB

Ridge deficiency is an unfortunate obstacle that obviates the placement of dental implants or results in placing them at an angle that compromises the prosthetic restoration. An ideal volume is essential for implant placement in an optimal three-dimensional position. Several methods for augmenting the alveolar ridge in preparation for implant placement have been described. Autogenous bone grafts, considered to be the “gold standard”, are associated with significant morbidity and require a second surgical site. Guided bone regeneration (GBR), is an alternative technique that use bone-substitute materials as adjuncts to or replacements for autografts in bone augmentation procedures to overcome the …

Assessment Of Head Asymmetry In Prematurely Born Children During Early Childhood Using 3d Photography, Panagiotis Kyteas

All ETDs from UAB

The aim of this study is to assess the course of plagiocephaly during early childhood in preterm and fullterm children and determine any differences throughout the given timeframe between the two groups. Materials and Methods: 34 preterm and 34 fullterm children born in the Oulu University Hospital, Finland attended the clinical study at the age of 3 (T1), 6 (T2), (T3) months and 3 years (T4). At each visit, 3D images of the head were obtained using a 3dMD head 5-pod camera system (3dMD, Atlanta, GA). Nine outcome variables including 2D and 3D measurements were calculated. Results: At T1, 26.47% …

The Effect Of Novel Antibiotic Compounds On Endodontic Biofilms, Steven Rhodes

All ETDs from UAB

Purpose: To investigate the effects of three novel experimental antibiotics on monospecies (Enterococcus faecalis) and polymicrobial (mixed) endodontic biofilms. Materials and Methods: Biofilms containing pure Enterococcus faecalis, as well as biofilms derived from mixed bacterial samples aspirated from inside the pulp spaces of necrotic human teeth, were grown onto slices of human dental in vitro. Biofilm formation capability was verified with SEM. The treatment groups consisted of 3 novel experimental antibiotics. 8.25% sodium hypochlorite and sterile saline were used as the controls. The biofilms were investigated with live/dead fluorochrome staining and confocal laser scanning microscopy. Results: The full strength sodium …

Development Of Graphene Oxide/Silver Nanocomposite Coating On Niti Alloy For Biomedical Applications, Dinesh Rokaya

Chulalongkorn University Theses and Dissertations (Chula ETD)

The study aimed to evaluate the surface, mechanical, and biological properties of graphene oxide/silver nanocomposite (GO/Ag) coated NiTi alloy. Substrates were coated using the electrophoretic deposition at 30 V for 1, 5, and 10 min, and were characterized by scanning electron microscope, Raman spectroscopy, energy dispersive spectroscopy, surface profilometer, and atomic fluoroscope force microscopy (AFM). Hardness, modulus of elasticity, and friction were done and surface adhesion was measured from AFM. Biocompatibility testing was done on human gingival fibroblasts using 3-[4,5-dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide (MTT) assay. Data were analyzed using SPSS 16; One-way ANOVA with post hoc Scheffe Test (P = 0.05). …

Effects Of Blood Contamination On Chemical Composition And Ion Releasing Of Calcium Silicate-Based Materials, Nareerat Thanavibu

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study assessed the effects of blood contamination on the chemical composition and ion release of calcium silicate-based materials. ProRoot MTA (WMTA), Biodentine and TotalFill BC RRM putty (TRRM) were investigated. Materials were exposed to blood (blood-contaminated condition) or normal saline (non-blood-contaminated condition) for 24 hours. Three samples of each group were analysed for chemical composition using X-ray diffractometer and an energy-dispersive X-ray spectoscope with a scanning electron microscope after immersed in phosphate-buffered saline for 1, 7, 14 and 28 days. Five samples of each group were used to measure pH and ion release using a pH meter and inductively …

Effectiveness Of Different Root Canal Disinfection Protocols On The Reduction Of Bacteria In Large Root Canals, Parnwad Sasanakul

Chulalongkorn University Theses and Dissertations (Chula ETD)

Introduction: The aims of this study were to evaluate the effectiveness of disinfection methods and determine the most promising irrigation protocol for regenerative endodontics in teeth with large root canals. Methods: Sterilized root samples with 0.8-mm wide apical foramen (n=94) were prepared from human mandibular premolars. Ninety-two samples were infected with E. faecalis for 21 days and biofilm formation was verified using scanning electron microscopy (n=2). The 90 infected samples were randomly assigned into 9 groups: no intervention (initial), 1.5% NaOCl irrigation (1.5N), 2.5% NaOCl irrigation (2.5N), 1.5N + intermittent passive ultrasonic irrigation (PUI), 1.5N + intermittent canal brushing with …

Comparison Of The Accuracy Between Digital And Conventional Impression In Different Multiple Implant Angles At Posterior Mandibular Region Using Innovation 3d Super Imposition Software Program; In Vitro Study, Arisa Hongsopa

Chulalongkorn University Theses and Dissertations (Chula ETD)

Statement of problem: This study aims to compare the accuracy of three-dimensional changes in position and angulation between digital and conventional impression techniques in different angulated implants at the mandibular partial edentulous area with the use of a mandibular partial edentulous reference model with 4 dental implants in different angulations (15 degrees buccally,lingually, mesially, and distally). Conventional and digital impression techniques were used for master model and fabricated 15 conventional master casts and 15 three dimensional printing models. Each scan body was connected with implant or analog to transfer implant positions. All of the master model, master casts, and printing …

Using Of Low Modulus Of Elasticity Base In High C-Factor Resin Composite Restoration: An In Vitro Study, Jomnang Yoohun

Chulalongkorn University Theses and Dissertations (Chula ETD)

This in vitro study aims to investigate whether or not using a resin modified glass ionomer as a base or intermediate layer would improve marginal integrity of a high C-factor class V resin composite restoration. Eighty non-carious human third molars were used. A box-shaped, 5x3x2.5 mm3, Class V cavity preparation was placed on buccal surface at the cementoenamel junction. Teeth were then randomly assigned to 8 experimental groups (n=10): group 1, Resin composite (FiltekTM Z350 XT); group 2, FiltekTM Bulkfill; groups 3 and 4, resin composite with FiltekTM Z350 XT Flowable as base; groups 5 and 6, resin composite with …

Comparison Of Three Dimensional Accuracy For Surgical Guided Template Fabrication Using Two Different Implant Planning Software Programs, Natchaya Thitaphanich

Chulalongkorn University Theses and Dissertations (Chula ETD)

Statement of problem: Static computer-assisted implantation system (s-CAIS) has been introduced to implant dentistry for decades. According to previous studies, they were recognised the inaccuracies of actual implant position placed via using static computer-assisted implantation system. These inaccuracies result from an accumulation of every step in the workflow from planning to accuracy assessment. Recently, there are multiple implant planning softwares available. coDiagnostiXTM software and Implant StudioTM software are widely used third-party implant planning softwares which claimed to provide predictable implant placement outcome. However, the effect of softwares used on accuracy of guided surgery in anterior maxilla region has not been …

Fracture Resistance Of Endodontically Treated Premolars With Deep Cervical Lesion Restored With And Without Post In Different Restorations, Phrohphrim Suebsawadphatthana

Chulalongkorn University Theses and Dissertations (Chula ETD)

Objectives: The purpose of this study was to evaluate the effects of fiber posts and different restorations on the fracture resistance of endodontically treated maxillary premolars with cervical cavities. Methods: In forty extracted human first maxillary premolars, cervical cavities were prepared simulating cervical lesions and randomly divided into four groups (n=10): COM-NP, endodontically treated teeth (ETT) restored with resin composite without fiber posts; ON-NP, ETT restored with CAD/CAM ceramic onlays without fiber posts; COM-P, ETT restored with resin composite and fiber posts; and CR-P, ETT restored with CAD/CAM ceramic crowns and fiber posts. After the fiber posts and restorations had …

Comparison Of Microtensile Bond Strength Of Universal Adhesives Utilizing Various Application Methods: An In Vitro Study, Suthatta Jeansuwannagorn

Chulalongkorn University Theses and Dissertations (Chula ETD)

Purpose: To investigate microtensile bond strength (μTBS) of a conventional three-step etch and rinse, and universal adhesive systems with etch and rinse mode utilizing various application methods at 24 hour and after 6 month water-­storage. Material and methods: Seventy-­two extracted human third molars were cut to expose a flat dentin surface. Optibond FL (OFL; Kerr, USA), Single Bond Universal (SU; 3M ESPE, USA), Clearfil Universal Bond Quick (CU; Kuraray Noritake Dental Inc., Japan), G-­Premio BOND (GP; GC Corporation, Japan), Prime&Bond Universal (PB; Dentsply, Germany) were used in etch and rinse mode following the manufacturers' instruction and double application method. Subsequently, …