Life Sciences Commons^™

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Effects Of Period And Temperature On Quality And Shelf-Life Of Cucumber And Garden-Eggs Packaged Using Cassava Starch-Zinc Nanocomposite Film, Adeshina Fadeyibi, Zinash Delebo Osunde, Mohammed Gana Yisa

Journal of Applied Packaging Research

Nanocomposite film can be used to prolong the shelf-life of fruits and vegetables. This research was undertaken to investigate the effects of packaging period and temperature on the quality and self-lives of cucumber and garden-eggs packaged using cassava starch-zinc nanocomposite film. Hundred grams each of cucumber and garden-eggs were wrapped in a 200× 350 mm size nanocomposite film and low density polyethylene (LDPE) of 2.240± 1.076 × 10^-10 gm^-1Pa^-1s^-1 water vapor and 1.568± 0.084× 10^-10 gm^-1Pa^-1s^-1 oxygen gas permeability. The products were stored at 10−27^oC temperatures …

Application Of Active And Edible Films Of Sodium Caseinate To Extend The Shelf-Life Of Argentine Pategrás Cheese, Brenda S. Álvarez, Natalia Damiani, Marina Czerner, Josefa F. Martucci, Liesel B. Gende

Journal of Applied Packaging Research

Argentine Pategrás cheese is one of the most popular types of cheese in Argentina. The main spoilage causes in these products are microbiological contamination and lipid rancidity. Semi-hard cheeses are usually covered with a paraffin wax that favors its preservation. When pieces are stored, cutting faces must be protected to prevent desiccation and contamination. Active biodegradable films are an alternative to the traditional materials, in particular, casein-based edible films are attractive for food applications. In the present work, active films of sodium caseinate with oregano (Origanum vulgare) and laurel (Laurus nobilis) essential oils were produced for …

Evaluation Of Biodegradability Characteristics Of Cellulose-Based Film As Per Is/Iso 14855-1, Narayan C. Saha Dr, Gaurav Madhu Dr, Diksha B. Kadu Ms

Journal of Applied Packaging Research

Biodegradable polymers (especially those derived from plant sources) begin their lifecycle as renewable resources, usually in the form of starch or cellulose. In this paper, the evaluation of biodegradability of cellulose-based polymer film under controlled composting conditions as per the guidelines of IS/ISO 14855 (Part-1) standard has been described. Microcrystalline cellulose (MCC) powder was taken as positive-control polymer. The apparatus used to analyse the degree and rate of biodegradation was developed indigenously. The validation of the biodegradability testing apparatus was also performed as per the prescribed test method given in IS/ISO 14855-1.

The Influence Of Different Packaging Materials And Atmospheric Conditions On The Properties Of Pork Rinds, Kristi Kõrge, Katrin Laos

Journal of Applied Packaging Research

Rancidity development in high fat content products is a common off-flavor flaw in snack foods. Packaging is often used to avoid spoilage and extend shelf-life. The properties of pork rinds packaged in four different packaging materials with and without nitrogen were studied during 120 days of storage (22 °C, RH 60%, absence of light). The influence of different packaging materials and atmospheric conditions on pork rinds’ water activity, hardness, crispness and rancidity development was determined. The PET/PE packaging material had lower barrier properties for the product in both atmospheric conditions compared with PP/metPP (40 and 50 μm) and PET/PETmet/PE. PP/metPP …

Comparison Of Organic Food Packaging In Denmark, Finland, Germany, Great Britain And Italy, Sara Paunonen, Marja Pitkänen, Mika Vähä-Nissi, Ville Leminen, Mika Kainusalmi

Journal of Applied Packaging Research

The objective of this study was to provide a snapshot of organic food assortments in supermarkets in Denmark, Finland, Germany, Great Britain, and Italy, and compare the packages used for five organic food products (eggs, meat, fish, mushrooms, berries). In addition, a comparison was made between packaging for regular and organic whole eggs. The highest number of organic products was found in the Danish supermarket. The main difference between the countries was in the use of national organic logos. Of the different food products, egg cartons had the most variation in materials and visual design. In all countries the product …

Morphological, Thermal And Oxygen Barrier Properties Plasticized Film Polylactic Acid, Kurniawan Yuniarto, Bruce A. Welt, Foliatini -, Hanafi -, Candra Irawan

Journal of Applied Packaging Research

Introducing plasticizer poly(ethylene glycol) (PEG400) was applied into poly(lactic acid) (PLA) to produce film matrix packaging by direct casting. Non mechanical properties were carried out plasticized PLA including morphology, crystallinity structure and degree, thermal properties and oxygen barrier properties. Plasticized PLA revealed improving surface structure of PLA film matrix form fractures and homogenous film were achieved at 5% PEG 400. Chromatogram PLA and plasticized PLA were categorized crystal structure an α-form crystal. Intercalated and exfoliated structure did not occur significantly due to dispersion PEG 400 in the matrix but indicated dispersion structure. Thermal properties did not improve plasticized PLA significantly …

Development Of Starch-Polyvinyl Alcohol (Pva) Biodegradable Film: Effect Of Cross-Linking Agent And Antimicrobials On Film Characteristics, Aniket Satish More, Chandani Sen, Madhusweta Das

Journal of Applied Packaging Research

To satisfy the need of developing eco-friendly flexible antimicrobial packaging film with minimum use of synthetic chemical ingredients, the present study examined the efficacy of citric acid (CA) as cross-linking agent and essential oils (EOs), viz., cinnamon essential oil (CEO) and oregano essential oil (OEO) as natural antimicrobials in corn starch-polyvinyl alcohol (CS-PVA) film. Compared to film prepared from filmogenic solution (FS) containing 75 kg CS+8.75 kg PVA+24.6 kg glycerol per m³ FS, film additionally containing CA at 0.07 kg/kg CS indicated 95% higher ultimate tensile strength (UTS) and 27% lower water vapor permeability (WVP). Film developed with incorporation …

Developments And Properties Of Plastic Mimicking Biopolymers For Food Packaging Application, Daniel I. Hefft

Journal of Applied Packaging Research

Sustainability takes an ever increasing importance in the food industry. Here not only the selection of raw materials plays a role, but also packaging materials. Nowadays there is an increasing number of biodegradable and bio-compostable packaging materials available.

However, these materials are still not able to replace mineral oil based packaging materials completely, nevertheless they are becoming increasingly important, since there must be solutions to problems such as pollution of the oceans by plastic waste, growing piles of rubbish from growing population, etc.

The following literature review shows briefly recent developments on plastic mimicking biopolymers, as these materials guarantee great …

Efficacy Of Natural Plant Extracts In Antimicrobial Packaging Systems, Kofi Jocelyn Brobbey, Jarkko J. Saarinen Adj. Prof., Hanna-Leena Alakomi Dr., Baoru Yang Prof., Martti Toivakka Prof.

Journal of Applied Packaging Research

Antimicrobial plant extracts used in food packaging provide a healthy packaging alternatives. They contain aromatic and phenolic compounds that are responsible for their antibacterial properties. In this study, we report the antibacterial effects of extracts obtained from sea buckthorn (Hippophaë rhamnoides L.) leaves, and inner bark of pine trees (Pinus silvestris) that were applied as coatings on paper suitable for packaging application. Extracts from sea buckthorn leaves exhibited antibacterial effect both as a solvent extract and as a coating on paper against Pseudomonas aeruginosa as test bacteria. However, coatings of pine bark extract did not exhibit …

Producing Food Packaging Printing Ink Via Green Emulsion Aggregation Method, Maryam Ataeefard, Shohre Rouhani

Journal of Applied Packaging Research

Digital printing will become more and more important in the packaging industry. Digital printing technology is growing because it allows the print suppliers to improve the level of service they offering to their customers, as well as, it opens new opportunities and helps them to make more money. Additives, dyestuffs, resin and other chemicals in packaging printing ink may influence safety of the food. Therefore, choosing suitable materials are very important in food packing ink. Over the last years, many printing ink manufacturers moved toward more sustainable inks. Drivers for this development, besides the resource scarcity and a higher legislative …

Effects Of Transportation Hazards On High Barrier Flexible Packaging Films, Kyle Dunno

Journal of Applied Packaging Research

Two flexible food packaging barrier material film structures were employed for this research study to evaluate the effects of over-the-road truck transport. The films containing different barrier materials, ethylene-vinyl alcohol (EVOH) or aluminum oxide (AlOx), were selected based on their abundant use within the flexible food packaging arena. Pouches were formed and filled with tomato paste before being thermally processed then palletized for shipment. Pouches were shipped over-the-road via truck transport a distance of 2,500 miles. After transport, the oxygen transmission rate (OTR) of the pouches located on the bottom and top layers of the palletized loads were obtained and …

Predictive Modeling Of Oxygen Transmission Through Micro-Perforations For Packaging Applications, Ayman Abdellatief, Bruce A. Welt, Jason Butler, Eric Mclamore, Arthur Teixeira, Sanjay Shukla

Journal of Applied Packaging Research

Methods for creating precise perforations in respiring produce packaging are being increasingly adopted. Knowledge of oxygen transfer through perforated packaging and oxygen distribution in packages is necessary for successful packaging design of fresh produce. An approach to modeling perforated packaging performance was developed using a cylindrical chamber with precision perforations using Fick’s second law. The model was simulated using two techniques including Finite Element Method (FEM) using commercially available software and Finite Volume Method (FVM) through programming. Perforations were approximated as a source term in the second method. Both simulation techniques showed trends similar to experimental data.

Effect Of Plasticizer On Oxygen Permeability Of Cast Polylactic Acid (Pla) Films Determined Using Dynamic Accumulation Method, Kurniawan Yuniarto, Bruce A. Welt, Aris Purwanto, Hadi Karia Purwadaria, Ayman Abdellatief, Titi C. Sunarti, Setyo Purwanto

Journal of Applied Packaging Research

Polylactic acid (PLA) is becoming an increasingly important biopolymer for packaging applications. PLA brittleness limits its applicability. This study evaluated PLA properties with increasing amounts of added polyethylene glycol (PEG) plasticizer. Oxygen transmission rate (OTR) of cast films was determined using the newly available Dynamic Accumulation (DA) method. Arrhenius temperature sensitivity of OTR and polymer Permeability was also determined. Permeability of neat PLA is 4.848 ml mm (STP)/m² s kPa; hence, 4.84 ml mm (STP)/m² s kPa, 4.07 ml mm (STP)/m² s kPa and 5.42 ml mm (STP)/m² s kPa by adding PEG 1 %, 5% …