Life Sciences Commons^™

Effects Of The Inclusion Of Rice Hull Derived Bio-Oil On Wood Pellet Production, Tyler E. Lowe

Theses and Dissertations

Wood pellet production has become an advancing industry for the sake of reducing greenhouse emissions into the atmosphere especially, in European Union countries. Researchers and industry executives seek new methods and materials to improve the pelletization process. Rice hulls or husks has the potential to aid in wood pelletization as they possess high calorific values. This study focuses on using rice hull derived bio-oil from pyrolysis, which will also decrease ash content, as an additive to aid in the wood pelletization process. Using two groups of rice hull derived bio-oil as an additive in wood pelletization: Group 1 uses heavy …

Field Durability Test Of Clt Wall Envelope Using Physical Barriers Against Termites And Structural Performance Of Nailed Hold-Down Brackets Connected To Fungus-Exposed Clt Walls, Kamal Neupane

Theses and Dissertations

The effectiveness of using commercial polyethylene flashing and stainless-steel mesh in CLT wall systems as the termite barriers were evaluated in a short-term field test. American Wood Protection Association (AWPA) E21's visual ratings ranged from 10 to 9 in the specimens showing little damage when no physical barriers were used. Termites were able to crawl beyond the physical barriers in few specimens showing the necessity of further research on height and installation method of physical barriers. On the second part, the effect of decay caused due to Postia placenta, a brown-rot fungus, on the structural performance of hold-down brackets connected …

Effects Of Seat And Axle Position On Pain, Pathology, And Independence In Pediatric Manual Wheelchair Users With Spinal Cord Injury, Hannah Frank

Theses and Dissertations

Manual wheelchair (MWC) users with spinal cord injury (SCI) rely heavily on their upperextremities to complete daily occupations. Due to repetitive shoulder use during wheelchair mobility and propulsion, MWC users are at greater risk of shoulder pain and shoulder pathology, and thus decreased independence, and lower quality of life. The relative fit of the wheelchair and its parameters are critical and can further impact the user’s propulsion biomechanics. Parameters such as seat angle and axle position may put the user in detrimental shoulder positions for longer periods of time, impacting health outcomes even more. Although the effects of wheelchair setup …

A Gis-Based Model To Assess On-Site Sewage Facility (Ossf) Contamination Risk To Local Water Resources, Alvaro Garcia

Theses and Dissertations

In a collaborative effort between Texas Water Resources Institute (TWRI), Cameron County Public Health (CCPH), Texas A&M AgriLife Extension (TAMAE), and the University of Texas Rio Grande Valley (UTRGV), a GIS database that includes relevant OSSF information, such as location, system age, lot size, and other important parameters was created.

This OSSF database, along with publicly available GIS data, was used to create an integrative GIS-based risk assessment model where OSSF risk parameters were assigned a risk factor and combined into a spatial contamination risk for surrounding areas and their receiving waterbodies. Parameters were broken down into two categories: environmental …

The Effect Of Low Dose Penicillin On Tumor Development In ApcMin/+ Mice, Kinsey Ann Sierra Meggett

Theses and Dissertations

Antibiotics have been our most effective weapon against bacterial infections since their discovery in the early 1900s. Their use has been critical in reducing mortality rate from infectious diseases. However, in the last few decades, the overuse of antibiotics, beginning at an early age and into adulthood, has become a growing concern globally. Penicillin is one of many extensively used antibiotics in early childhood that has been used to treat childhood infections. Recent studies showed that exposure to low dose penicillin can have adverse effects leading to chronic illness such as diabetes, allergies, inflammation, and susceptibility to obesity, with the …

Investigating Mechanisms Of Nanotoxicity Of A Next-Generation Lithium Cobalt Oxide Nanomaterial, Nicholas Joseph Niemuth

Theses and Dissertations

Commercial use of engineered nanomaterials (ENMs; materials in the range of 1-100 nm) has grown dramatically since the discovery of the means to observe, characterize, and controllably synthesize these materials at the end of the 20th century. Today, ENMs represent a global market valued in the trillions of dollars, incorporated into products because of the unique properties they confer, including increased strength, catalytic activity, and interactions with light. In this time, ENMs have also grown from relatively simple first-generation materials, such as Au, Ag, and carbon ENMs, to complex next-generation materials incorporating numerous elements into materials with complex secondary structures, …

Exploration Of Antimicrobial And Cell Proliferation Properties Of Nanofibers Incorporating Nopal (O. Cochenillifera) Extract, Cristobal Rodriguez

Theses and Dissertations

This study focused on the fabrication of Forcespinning® nanofibers composed of Opuntia cochenillifera, ‘nopal’, mucilage (N) extract, chitosan (CH), and pullulan (PL) (N/CH/PL) were developed with an optimum fiber average diameter of 406±127 nm, and studied for their ability to sustain adhesion and proliferation of mouse embryonic fibroblast (NIH 3T3) cells. After a 6-day incubation period, N/CH/PL nanofibers displayed robust cell proliferation, while also exhibiting inhibitory properties through an N extract dip-coating process against gram-negative bacteria Escherichia coli in a 24 h bacterial growth study. A demonstration of integrated natural bioactive compounds with combined biodegradable polymers, provide an enhanced …

A Mechanism Behind The Mechanotransduction Of Surface Characteristics In Osteoblasts, Otto J. Juhl Iv

Theses and Dissertations

Biomaterials for use in bone regeneration and healing range from metal and metal alloy implants to hydrogel-based solutions. These materials can be optimized to increase bone healing and integration by improving the mechanical and biological properties. Regardless of the material itself, the cell-substrate interaction is key to the success of the biomaterial once implanted. Substrate surface characteristics such as roughness, wettability, and particle density are well-known contributors to a substrate’s overall osteogenic potential, and therefore the substrate's overall success. Unfortunately, it is still unknown how these substrate surface characteristics are transduced into intracellular signals by cells, preventing specific tailoring of …

Computational Analysis And Prediction Of Intrinsic Disorder And Intrinsic Disorder Functions In Proteins, Akila I. Katuwawala

Theses and Dissertations

COMPUTATIONAL ANALYSIS AND PREDICTION OF INTRINSIC DISORDER AND INTRINSIC DISORDER FUNCTIONS IN PROTEINS

By Akila Imesha Katuwawala

A dissertation submitted in partial fulfillment of the requirements for the degree of Engineering, Doctor of Philosophy with a concentration in Computer Science at Virginia Commonwealth University.

Virginia Commonwealth University, 2021

Director: Lukasz Kurgan, Professor, Department of Computer Science

Proteins, as a fundamental class of biomolecules, have been studied from various perspectives over the past two centuries. The traditional notion is that proteins require fixed and stable three-dimensional structures to carry out biological functions. However, there is mounting evidence regarding a “special” class …

Nature-Inspired Material Strategies Towards Functional Devices, Sayantan Pradhan

Theses and Dissertations

Naturally sourced, renewable biomaterials possess outstanding advantages for a multitude of biomedical applications owing to their biodegradability, biocompatibility, and excellent mechanical properties. Of interest in this dissertation are silk (protein) and chitin (polysaccharide) biopolymers for the fabrication of functional biodevices. One of the major challenges restricting these materials beyond their traditional usage as passive substrate materials is the ability to combine them with high-resolution fabrication techniques. Initial research work is directed towards the fabrication of micropatterned, flexible 2D substrates of silk fibroin and chitin using bench-top photolithographic techniques. Research is focused on imparting electrochemical properties to silk proteins using conducting …

Evaluating Neuromuscular Function Of The Biceps Brachii After Spinal Cord Injury: Assessment Of Voluntary Activation And Motor Evoked Potential Input-Output Curves Using Transcranial Magnetic Stimulation, Thibault Roumengous

Theses and Dissertations

Activation of upper limb muscles is important for independent living after cervical spinal cord injury (SCI) that results in tetraplegia. An emerging, non-invasive approach to address post-SCI muscle weakness is modulation of the nervous system. A long-term goal is to develop neuromodulation techniques to reinnervate (i.e. resupply nerve to) muscle fiber and thereby increase muscle function in individuals with tetraplegia. Towards this goal, developing monitoring techniques to quantify neuromuscular function is needed to better direct neurorehabilitation. Assessment of voluntary activation (VA) is a promising approach because the location of the stimulus can be applied cortically using transcranial magnetic stimulation (TMS) …

Nebulizer-Based Systems To Improve Pharmaceutical Aerosol Delivery To The Lungs, Benjamin M. Spence

Theses and Dissertations

Combining vibrating mesh nebulizers with additional new technologies leads to substantial improvements in pharmaceutical aerosol delivery to the lungs across therapeutic administration methods. In this dissertation, streamlined components, aerosol administration synchronization, and/or Excipient Enhanced Growth (EEG) technologies were utilized to develop and test several novel devices and aerosol delivery systems. The first focus of this work was to improve the poor delivery efficiency, e.g., 3.6% of nominal dose (Dugernier et al. 2017), of aerosolized medication administration to adult human subjects concurrent with high flow nasal cannula (HFNC) therapy, a form of continuous-flow non-invasive ventilation (NIV). The developed Low-Volume Mixer-Heater (LVMH) …