Other Engineering Commons^™

Helmholtz Reciprocity In Bidirectional Y-Junction Couplers, Hosuk Lee

Optical Science and Engineering ETDs

This thesis explores the light propagation characteristics in Y-junction couplers based on the Helmholtz reciprocity principle. The Helmholtz reciprocity principle is a crucial concept in optical system design, and it has primarily been understood based on input-output symmetry. However, this study emphasizes reciprocity needs to consider the entire system, beyond the traditional input-output symmetry reciprocity interpretation. For this study, we specifically examined the direction-dependent asymmetrical outputs, in the Whistle-geometry Ring Laser (WRL) structure. And the WRL results cannot be fully explained by simple input-output symmetry for reciprocity. The Y-junction coupler in the WRL structure makes different output characteristics based on …

Volumetric Imaging Of Cellular Dynamics Using Light-Sheet Microscopy: From Subcellular Structures To Whole Organisms, Md Nasful Huda Prince

Optical Science and Engineering ETDs

Advancing biomedical imaging requires platforms that combine high-resolution, speed, and stability across biological scales. This dissertation presents three innovations designed to address limitations of conventional light-sheet and oblique plane imaging. First, we introduce Reflected Inline Detection in Epi-Oblique Plane Microscopy (RIDE-OPM), a compact and drift-resistant system that eliminates a tertiary detection path while maintaining alignment flexibility, enabling robust long-term live imaging. Second, we present a high-speed Axially Swept Light-Sheet Microscopy (ASLM) platform for cleared tissues, using dual foci and synchronized sweeping to achieve isotropic sub-micron resolution at up to 40 frames-per-second, a fourfold improvement over standard ASLM. Integrated with a …

Phase Nanoscopy With Correlated Frequency Combs, Xiaobing Zhu

Optical Science and Engineering ETDs

In this dissertation a sensing method applying to any physical quantity that modifies optical phase is developed. Two pulses are produced inside a synchronously pumped Optical Parametric Oscillator, generating two identical, undistinguishable frequency combs. The physical quantity to be measured applies a small phase shift/round trip to one of the pulses, resulting in a frequency shift of the corresponding comb. The latter frequency is measured as a beat by interfering the two combs on a detector. A world record resolution, close to the quantum limit, of 0.033 nanoradian (corresponding to 0.006 fm in displacement) is achieved. A detailed analysis of …

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Fabrication And Characterization Of A Monolithic Photonic Integrated Circuit With High-Aspect Ratio Photonic Device Structures, Sami A. Nazib

Optical Science and Engineering ETDs

The focus of this work was to create a process to fabricate an InP-based Photonic Integrated Circuit (PIC). The design of the PIC required the photonic components of this device to be created by deep etching of an epitaxially-grown multilayer structure. Therefore, a novel dry etching process was developed to produce very high aspect- ratio (HAR) features. This process not only involved the development of dry etch chemistry but also the engineering of a metal mask structure. The next step of the challenge was to use a polymer-based material that would have two functions: cladding for the etched photonic components …

Optical Responses Of Hybrid Electromagnetic Nanostructures, Dominic Bosomtwi

Optical Science and Engineering ETDs

Fano resonances result from the interference between a broad background and a narrow state, producing asymmetric scattering profiles. Under specific conditions, destructive interference collapses the Fano resonance width, leading to bound states in the continuum (BICs) that localize light within a nanostructure while maintaining an infinitely high-quality factor (Q-factor).

This dissertation explores the design of nanostructures with multilayer hybrid plasmonic-dielectric metasurfaces using full-wave numerical simulations, facilitating multiple Fano resonances and BICs. By adjusting nanoantenna dimensions, multiple modes are excited at plasmonic-dielectric interfaces, leading to strong interactions and hybridization of energy levels, manifested as Rabi splitting.

These findings enable advancements in …

Mbe Growth Of Sb Based Alloys Using Interfacial Misfit Arrays For Mwir Devices, Fatih Furkan Ince

Optical Science and Engineering ETDs

This thesis explores the monolithic integration of antimonide based narrow bandgap semiconductors on commercially available substrates for mid-wave infrared (MWIR) devices. The research focuses on the integration and growth of antimonide based alloys using the interfacial misfit dislocation (IMF) arrays to enhance the cost efficiency, manufacturability and performance. The study particularly investigates the relaxation mechanisms of antimonide alloys on InAs and InP substrates, assessing the impact of mismatch strain on the quality of epilayers. The IMF arrays are examined using high-resolution transmission electron microscopy (HR-TEM) and x-ray diffraction (XRD), revealing information about the effective strain relief mechanisms behind IMF arrays …

Volumetric Imaging Using The Pupil-Matched Remote Focusing Technique In Light-Sheet Microscopy, Sayed Hassan Dibaji Foroushani

Optical Science and Engineering ETDs

ABSTRACT

The dissertation explores innovative techniques in light sheet microscopy, a pivotal tool in biomedical imaging, to enhance its speed, resolution, and efficiency in capturing dynamic biological processes. Light sheet microscopy allows for quick 3D imaging of biological specimens ranging from cells to organs with high spatiotemporal resolution, large field-of-view, and minimal damage, making it vital for in vivo imaging.

The first project introduces a novel optical concept designed to optimize Axially Swept Light Sheet Microscopy (ASLM). This technique is crucial for imaging specimens ranging from live cells to chemically cleared organs due to its versatility across different immersion media. …

High-Power Laser Cooling And Temperature-Dependent Fluorescence Studies Of Ytterbium Doped Silica, Brian Topper

Optical Science and Engineering ETDs

Experimental observation of optical refrigeration using ytterbium doped silica glass in recent years has created a new solution for heat mitigation in high-power laser systems, nonlinear fiber experiments, integrated photonics, and precision metrology. Current efforts of different groups focus on compositional optimization, fiber fabrication, and investigating how much silica can be cooled with a laser. At the start of this work, the best effort in laser cooling ytterbium doped silica saw cooling by 6 K from room temperature. This dissertation follows the experimental efforts that culminated in the increase of this initial record by one order of magnitude. Comprehensive spectroscopic …

Filaments And Their Application To Air Lasing, Spectroscopy, And Guided Discharge, Ali Rastegari

Optical Science and Engineering ETDs

Laser filamentation is a fascinating phenomenon that occurs when an intense laser beam travels through transparent materials, in particular air. At sufficiently high power (TW in the near IR, GW in the UV), instead of spreading out like a regular laser beam, something remarkable happens: the laser beam becomes tightly focused, creating a thin and intense column of light called a laser filament. Laser filamentation is characterized by two main properties: (I) a high-intensity core that remains narrow over long distances beyond the Rayleigh range and (II) a low-density plasma channel within the core. In recent years, laser filamentation has …

Investigation Of Gaas Double Heterostructures For Photonic Heat Engines, Nathan Giannini-Hutchin

Optical Science and Engineering ETDs

The creation of a laser cooled semiconductor device has been a long sought achievement. GaAs-based devices have emerged as a promising candidate for the realization of this goal. Efforts to improve the efficiency of such devices have enabled the material to exhibit external quantum efficiencies (EQE, a measure of the probability that an excitation leads to the emission of a photon) of 99.5\%. Despite this impressive feat, a laser coolable device remains elusive.

To investigate the obstacles to such a device, the material characteristics of GaAs-based double heterostructures (DHS) are theoretically and experimentally examined. Through this study, a GaAs $\vert$ …

Investigation Of Laser And Nonlinear Properties Of Anderson Localizing Optical Fibers, Cody Ryan Bassett

Optical Science and Engineering ETDs

In this dissertation, I investigate the possibility of lasing and nonlinear phenomena in completely solid-state transverse Anderson localizing optical fibers (TALOFs). I examine three areas within this range of topics. The research in nonlinear phenomena focuses on four-wave mixing (FWM). FWM is of high interest in TALOFs due to the fact that guided localized modes of the fiber each have different propagation constants, and thus unique possible FWM pairs can be generated from the same input pump beam. I demonstrate the generation of FWM in the TALOF by pumping it with 532 nm light into a localized mode and observing …

Ultrashort Pulse Laser Filamentation Electrical And Optical Diagnostic Comparison, James E. Wymer

Optical Science and Engineering ETDs

Results presented here examine the effect of changing gas pressure on the radio frequency (RF) emissions of an ultrashort pulse laser filament plasma and how those emissions vary longitudinally in the laser focal region. We use a WR284 rectangular waveguide with a 1.5 cm hole that allows the beam through. A 3.2 GHz microwave signal is emitted in the waveguide, and signals are received through a waveguide-to-coax antenna connected to an HP8470B Schottky diode. By enabling and disabling the 3.2 GHz signal, we measure both the self-emitted RF from a USPL filament and subsequently the degree of attenuation a filament …

Integrated Grating Couplers On-A-Chip: Characterizations And Applications, Xuemei Wang

Optical Science and Engineering ETDs

We demonstrate two applications based on grating coupled phase matching to a slab waveguide: lab-on-a-chip spectrometer using a transversely chirped grating and indoor lidar plenoptic sensor array for Time of flight (ToF) position mapping system. In the first application, a chirped grating waveguide coupler serves as a spatially dependent narrow-band filter. The transversely-chirped-input grating is fabricated on a SiO₂-Si₃N₄-SiO₂ waveguide atop a Si substrate by interferometric lithography. Light with wavelength from 400- nm to 700 nm couples into Si₃N₄ waveguide through transversely chirped grating incident at a 33.5⁰ angle and …

Atomic Gradiometry Based On The Interference Of Microwave Optical Sidebands, Kaleb L. Campbell

Optical Science and Engineering ETDs

We describe a novel pulsed magnetic gradiometer based on the optical interference of sidebands generated using two spatially separated alkali vapor cells. The sidebands are produced with high efficiency using parametric frequency conversion of a probe beam interacting with Rubiduim 87 atoms in a coherent superposition of magnetically sensitive hyperfine ground states. First, experimental evidence of the sideband process is described for both steady-state and pulsed operation. Then, a theoretical framework is developed that accurately models sideband generation based on density matrix formalism. The gradiometer is then constructed using two spatially separated vapor cells, and a beat-note is generated. The …

Gamma And Neutron Irradiation Effect On Ga-Polar And N-Polar Gan Based Diodes, Farnood Mirkhosravi

Optical Science and Engineering ETDs

III-nitride material (GaN) shows a lot of potential for next-generation power electronics. This material is advantageous due to its wide bandgap, high electron mobility, high thermal and mechanical stability, small form factor, and higher radiation tolerance. The higher radiation tolerance makes the GaN-based devices more attractive for harsh-environment applications, like aerospace, nuclear reactor, and fusion facilities, particle accelerators, and post-detonation environments applications.

GaN due to its unique crystal structure can be grown in different orientations and can provide specific advantages in electronic and optoelectronic devices. While the Ga-polar orientation of GaN has been widely investigated for its proprieties, there are …

Examination Of Ionization In Cesium Diode Pumped Alkali Lasers With An Ion Chamber Diagnostic, Benjamin Oliker

Optical Science and Engineering ETDs

Diode pumped alkali lasers (DPALs) are leading candidates for future high power applications, with many potential utilities for the military, aerospace, communications, and scientific diagnostics. A critical step in their development is measurement and understanding of unwanted ionization processes that occur inside the laser, which decrease efficiency, reduce the usable alkali population, and increase heat load. In this dissertation, direct measurement of the ionization rate of a cesium DPAL gain medium are made for the first time, via application of an ion chamber diagnostic. Results will demonstrate that the rate of ionization is slow compared to pump absorption, with a …

Intracavity Phase Interferometry Based Fiber Sensors, Luke Jameson Horstman

Optical Science and Engineering ETDs

Intracavity Phase Interferometry (IPI) is a detection technique that exploits the inherent sensitivity of a laser's frequency to the parameters of its cavity. Intracavity interferometry is orders of magnitude more sensitive than its extracavity alternatives. This dissertation improves on previous free-space proof-of-concept designs. By implementing the technique in fiber optics, using optical parametric oscillation, and investigating non-Hermitian quantum mechanics and dispersion tailoring enhancement techniques, IPI has become more applicable and sensitive. Ring and linear IPI configurations were realized in this work, both operating as bidirectional fiber optical parametric oscillators. The benefit of using externally pumped synchronous optical parametric oscillation is …

Ultrafast Spectroscopy Of Air Lasing In Filaments, Brian Robert Kamer

Optical Science and Engineering ETDs

Filamentation in air is a phenomenon that has been extensively investigated for the last two decades. At sufficiently high intensity, even air is a nonlinear medium. These intensities are reached with ultrashort pulses (50 to 100 fs) of more than 1 J energy, which self-focus in air, reach ionizing intensities of oxygen and nitrogen, creating a plasma that defocuses the beam. The air filament is a self-induced waveguide resulting from a balance of focusing and defocusing. In this work new techniques were developed to visualize and analyze this phenomenon through its emission, in particu- lar the UV emission of the …

Interferometric Lithography- An Approach To Large Area And Cost Effective Nanopatterning, Vineeth Sasidharan

Optical Science and Engineering ETDs

In this dissertation interferometric lithography is approached in two different ways to address two important constraints of nanopatterning. One approach solves the problem of scaling up interferometric lithography to wafer scale (4 inch or larger) area. Through the second approach we have developed a nanopatterning technique based on interferometric lithography by using an inexpensive (~$100) diode laser as source, making interferometric lithography a very cost-effective technique.

Wafer-scale large-area nanopatterning was developed using an amplitude grating mask as a grating beam splitter along with spatial averaging of laser intensity by wobbling. The longitudinal and transverse coherence issues both are eased by …

Optimization And Characterization Of Doped Optical Fibers For Radiation Balanced Fiber Laser And Amplifier, Mostafa Peysokhan

Optical Science and Engineering ETDs

Due to the reliability, compactness, low maintenance costs, superior performance, and versatility of fiber lasers and amplifiers, they are commonly employed in scientific and directed energy applications. Among all kinds of fiber lasers and amplifiers, high-power, Yb-dopped fiber lasers and amplifiers have been extensively researched to achieve higher output powers. One of the major hindrances to achieving higher powers with adequate stability and efficiency in high power performance is heat generated in the fiber lasers and amplifiers' core. The Radiation Balanced Laser (RBL) is a viable technique for heat mitigation has been proposed by S.~Bowman in 1995. RBL technique is …

Interaction Of Optomechanical Cavities With Acoustic Waves And Oscillators, Ke Huang

Optical Science and Engineering ETDs

Resonators and oscillators are key elements in a wide variety of natural and manmade systems. As such understanding and exploiting their dynamics both as isolated devices and members of coupled systems has been the subject of intensive investigation for more than a century. The advent of optomechanical resonators (OMRs) that support strong coupling between optical and mechanical modes resulting in self-sustained optomechanical oscillations, has created new opportunities for device development and implementation of coupled oscillatory systems. One aspect of this thesis is focused on exploring some of the unique features of OMRs and optomechanical oscillators (OMOs) that can be exploited …

Generation Of Correlated Dual Frequency Combs With Pm Fiber Lasers For High-Precision Metrology, Hanieh Afkhamiardakani

Optical Science and Engineering ETDs

Intracavity Phase Interferometry (IPI) using two correlated, counter-propagating frequency combs (pulse trains) in mode-locked lasers has evolved into a powerful technique for high-precision metrology. In this method a physical parameter to be measured imparts a phase shift onto a pulse circulating in the laser cavity. Inside a laser cavity, that phase shift becomes a frequency shift (phase shift/round-trip time) applied to the whole frequency comb created by this pulse as it exits the cavity at each round-trip. This frequency shift is measured by interfering this comb with a reference comb created by a reference pulse circulating in the same mode-locked …

Radiation-Balanced Fiber Lasers And Amplifiers, Esmaeil Mobini Souchelmaei Mr

Optical Science and Engineering ETDs

Over the past decades, high-power fiber lasers and amplifiers have been extensively under research to achieve higher output powers. However, temperature rise in the core of fiber lasers and amplifiers has been a big issue in power-scaling. Radiation-balancing is a viable technique introduced for effective heat mitigation in lasers and amplifiers by S. Bowman in 1995. Radiation-balancing relies on solid-state laser cooling as a self-cooling mechanism to mitigate the generated heat in lasers and amplifiers. To implement the mentioned idea in fiber lasers and amplifiers, a set of issues should be scrutinized; (i) the amenability of silica glass (as the …

The Development Of All Solid-State Optical Cryo-Cooler, Junwei Meng

Optical Science and Engineering ETDs

This dissertation describes the development of an all solid-state optical cryo-cooler. Crystals of 10% wt. ytterbium-doped yttrium lithium fluoride (Yb³⁺:YLF) are used to cool an infrared HgCdTe sensor payload to an absolute temperature below 135 K, equivalent to delta T equal 138 K below ambient. This record level of cooling is accomplished with a single stage, in a completely vibration-free environment, with a corresponding cooling power of 190 mW. This milestone is made possible by the design and fabrication of an undoped YLF thermal link that efficiently shields the payload with a non-right angle kink from intense anti-Stokes …

Applications Of The Negatively-Charged Silicon Vacancy Color Center In Diamond, Forrest A. Hubert

Optical Science and Engineering ETDs

The spatial resolution and fluorescence signal amplitude in stimulated emission depletion (STED) microscopy is limited by the photostability of available fluorophores. Here, we show that negatively-charged silicon vacancy (SiV) centers in diamond are promising fluorophores for STED microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. A home-built pulsed STED microscope was used to image shallow implanted SiV centers in bulk diamond at room temperature. We performed STED microscopy on isolated SiV centers and observed a lateral full-width-at-half-maximum spot size of 89 ± 2 nm, limited by the low available STED laser pulse energy (0.4 nJ). For a …

Mid-Ir Optical Refrigeration And Radiation Balanced Lasers, Saeid Rostami

Optical Science and Engineering ETDs

This dissertation reports recent advances in mid-infrared (mid-IR) optical refrigeration and Radiation Balanced Lasers (RBLs). The first demonstration of optical refrigeration in Ho:YLF and Tm:YLF crystals as promising mid-IR laser cooling candidates is reported. Room temperature laser cooling efficiency of Tm- and Ho-doped crystals at different excitation polarization is measured and their external quantum efficiency and background absorption are extracted. Complete characterization of laser cooling samples is obtained via performing detailed low-temperature spectroscopic analysis, and their minimum achievable temperature as well as conditions to achieve laser cooling efficiency enhancement in mid-IR are investigated. By developing a Thulium-doped fiber amplifier, seeded …

Integrated Chirped-Grating Spectrometer-On-A-Chip, Shima Nezhadbadeh

Optical Science and Engineering ETDs

In this dissertation we demonstrate a new structure based on waveguide coupling atop a silicon wafer using a chirped grating to provide the dispersion that leads to a high-resolution, compact, fully integrable and CMOS-compatible spectrometer. Light is both analyzed and detected in a single, completely monolithic component which enables realizing a high-resolution portable spectrometer with an extremely compact footprint. The structure is comprised of a SiO₂/Si₃N₄/SiO₂ waveguide on top of a silicon wafer. Grating regions are fabricated on the top cladding of the waveguide. The input light is incident on a chirped grating …

Tailored Frequency Comb Structures And Their Sensing Applications, James Hendrie

Optical Science and Engineering ETDs

The focus of this dissertation is the development and investigation of nested cavity mode-locked lasers and their resultant tailored frequency combs. A nested cavity is made up of two cavities, known as parents. One parent is a larger, active, 100MHz Ti:Saph oscillator and the other is a smaller, passive, 7GHz Fabry-Perot Etalon (FPE). Unlike standard frequency combs that are continuous, a tailored comb’s teeth are distributed in equally spaced groups where the center of each group corresponds to the resonance of the FPE and the side bands are determined by the resonances of the Ti:Saph. This unique coupling of the …

Reducing Threading Dislocation In Gasb Epilayer Grown On Gaas Substrate For Photovoltaic And Thermophotovoltaic Application, Ahmad Mansoori

Optical Science and Engineering ETDs

GaSb based photovoltaic devices have been demonstrated on GaAs substrates by an inducing interfacial array of 90° misfit dislocations. Despite the beneficial qualities of the highly stable 90° misfit dislocation, there is a significant density of residual threading dislocations in the GaSb layer, resulting in the degradation of the electrical performance of such photovoltaic cells compared to lattice matched devices. We aim to reduce threading dislocation density by optimizing growth temperature and by using an AlSb dislocation filtering layer. The growth temperature optimization results in a reduction of the threading dislocation density to 1.3 × 10⁸ cm⁻². …