Other Engineering Commons^™

Techno-Economic Analysis Of Implementing Carbon Capture And Storage (Ccs) At The Punagaya 2×100 Mw Coal Power Plant, Ricky Andreas Kristianto Siringoringo, Rahma Muthia, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The increase in greenhouse gases due to the combustion of fossil fuels is one of the major drivers of global warming and consequently drives the development of low-carbon technologies such as Carbon Capture and Storage (CCS). The aim of this study is to evaluate the technical and economical feasibility of the implementation of CCS technology in the Punagaya Subcritical Coal-Fired Power Plant (CFPP) 2×100 MW as a part of the energy transition strategy towards Net Zero Emissions (NZE) 2060. The simulation was carried out using Aspen HYSYS software, including coal combustion, CO₂ capture through MDEA-PZ solvent, dehydration, transportation, and storage …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Somatic Prosthetics For Planetary Resonance, Disha Dharesh Kumar R

Masters Theses

This thesis investigates how industrial design can transcend extractive technological paradigms in favor of relational interfaces that foster planetary attunement. Framing the climate crisis as a 'crisis of imagination', the research challenges the Western bifurcation of nature and culture by drawing on Indic cosmologies- which recognize stones, plants, and ecosystems as conscious at different levels and participants in a shared cosmic field. By synthesizing research in Biosemiotics, Quantum Information Pansycishm, and Neuroscience, the project redefines intelligence as a distributed, more-than-human phenomenon.

The research materializes as a speculative design artifact: a device that functions as a somatic prosthetic for planetary resonance. …

Monitoring Groundwater Flow At Old Works Using Anisotropy, 3-D Electrical Geophysics, And Dem-Based Terrain Analysis, Yihaun Gao

Honors Theses

Groundwater flow in shallow heterogeneous environments is often difficult to characterize using a single geophysical method. This study applies an integrated approach combining azimuthal resistivity anisotropy, self-potential (SP) measurements, DEM-derived terrain indices, and three-dimensional electrical resistivity tomography (3-D ERT) to delineate preferential groundwater pathways at the Old Works Golf Course in Anaconda, Montana. Azimuthal anisotropy analysis from eighteen 2-D ERT profiles revealed a dominant directional dependence in electrical conductivity, indicating a structural or sedimentological control on subsurface flow. The anisotropy results indicate a preferred conductivity direction of approximately 200°–210° in azimuth (0° is north), suggesting that groundwater movement is guided …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Downstream Effects Of Post Aerobic Digestion And Divalent Cation Treatment: Dewaterability, Phosphorus Mitigation, And Process Odors, Maya Marisol Quijano Garcia

Civil & Environmental Engineering Theses & Dissertations

This study evaluated post-aerobic digestion (PAD) with aeration, mixing, and divalent cation addition to improve phosphorus capture, dewaterability, and odor control in thermal hydrolysis process (THP)–treated anaerobic digestate at the Hampton Roads Sanitation District’s Atlantic Treatment Plant. A three-day PAD process was operated under constant air flow (5 LPM) and dissolved oxygen (DO)-setpoint (0.2 mg/L) aeration conditions with Ca(OH)₂ or Mg(OH)₂ dosing. Aeration and mixing alone increased polymer demand by 14–46 % relative to untreated influent, indicating enhanced extracellular polymeric substance release. Chemical conditioning partially mitigated this increase but did not restore polymer demand to baseline levels. Dewatered cake total …

Multi-Modal Tensor Fusion For Alzheimer’S Disease Recognition, Mason Li, Tiffany Le, Jiajing Huang, Yuxin Wen

Engineering Faculty Articles and Research

Accurate and early diagnosis of Alzheimer’s disease (AD) is critical for effective intervention, disease monitoring, and patient care. Traditional diagnostic approaches rely on a single modality, such as clinical assessments, neuroimaging, or genetic markers, which may fail to capture the complex, multifaceted nature of AD. Multimodal learning has therefore been explored to integrate complementary information across data sources. However, conventional fusion strategies, including early feature concatenation and late decision-level fusion, often model modalities independently and fail to capture high-order cross-modal interactions. To address these limitations, we propose a multimodal tensor fusion network (MTFN) that integrates heterogeneous data sources, including visual …

Dual-Function Plasmonic Structure For Logic Operations And Circular Polarization Detection, Marjan Bazian, Mark C. Harrison

Engineering Faculty Articles and Research

Many integrated photonic devices have a high potential for dual applications, making them more versatile components in photonic integrated circuits. In this study, we show that a plasmonic XOR gate structure, originally designed to perform logic operations, can also be used as a circular polarization detector. This multi-purpose capability stems from the phase-encoded input mechanism that controls the output response of the structure. We adapted this mechanism to select the output based on the polarization state of light. The design of this structure, utilizing the subwavelength field confinement of plasmonic waveguides, enables the integration of logic and detection functions into …

Computational Modeling Of Enhanced Nonlinear Optical Response In Plasmonic Waveguide Devices With Epsilon-Near-Zero Films, Kevin T. Le, Mark C. Harrison

Engineering Faculty Articles and Research

Silicon photonics faces fundamental limitations in nonlinear applications due to weak Kerr nonlinearity, substantial two-photon absorption, and coupling challenges with subwavelength structures. This work investigates epsilon-near-zero (ENZ) materials integrated into plasmonic waveguide architectures for enhanced nonlinear photonic devices. ENZ materials exhibit nonlinear refractive indices several orders of magnitude higher than conventional materials near their zero-permittivity wavelength, enabling giant optical effects over deeply sub-wavelength interaction lengths. We present finite element method simulations of plasmonic ENZ waveguides, investigating layer thickness optimization for nonlinear enhancement while minimizing optical losses. Initial modal analysis confirms superior field confinement in hybrid plasmonic-ENZ structures compared to conventional …

Machine Learning For Predicting Prosthetic Limb Movements, Jessica Alexandra Cegarra Arraiz

Theses and Dissertations

This thesis develops and evaluates a deep learning-based prediction model capable of identifying intended limb movement from surfaced electromyography (sEMG) signals using sequence learning techniques. sEMG signals change over time due to multiple factors such as muscle fatigue or user variability. Traditional prosthetics control methods rely on static feature extraction, ignoring how signals change over time, thereby limiting their ability to capture the temporal changes of muscle activity. As a result, these approaches often lead to poor accuracy, robustness, and generalization. Limited experimental validation has been conducted on sequence-based machine learning approaches using temporal sEMG data from publicly available datasets …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Spatially Mapped Statewide Estimated Potential Evapotranspiration Using An Efficient Surface Interpolation Method: A Case Study Of South Carolina, Sudhanshu S. Panda, Devendra M. Amatya, Ka Kit Liu, Augustine Muwamba, Timothy J. Callahan

Journal of South Carolina Water Resources

Potential evapotranspiration (PET) exhibits substantial spatial and temporal variability across large landscapes, necessitating site-specific estimation for accurate environmental and water resource assessments. However, obtaining PET or ET data for specific locations across an entire state remains challenging due to the limited number of weather stations and associated environmental datasets. This study aimed to develop an automated geospatial modeling framework to map PET distribution across South Carolina, USA, using PET estimated by the temperature-based Hargreaves–Samani (H–S) method with daily weather data from 59 NOAA stations. Because the accuracy of spatial interpolation depends on both the target variable and the desired spatial …

User Interface And Watchstation Improvements Required For Multi-Vehicle Usv Operations, Val Schmidt, Joshua Bergeron

Faculty Publications

In October 2024, the University of New Hampshire and NOAA’s Uncrewed Systems Office embarked on a mapping mission in the Gulf of Maine, simultaneously operating two DriX Un-crewed Surface Vehicles. Goals of the project were focused on testing hypotheses related to concepts of operation, including the safety of operations, cognitive loading of operators, management of vehicle endurance, vehicle logistics, maintenance and field support, refueling and a host of others.

From The Editors, Rully Karim Dr.

Journal of Project Management & Construction

The Journal of Project Management and Construction (JPMC) is a peer-reviewed publication dedicated to advancing the field of project management and construction, grounded in the principles outlined in the PMBOK 6th Edition. Our focus encompasses the ten knowledge areas essential to successful project management: Integration, Scope, Schedule, Cost, Quality, Resource, Communications, Risk, Procurement, and Stakeholder Management.

JPMC publishes original research papers written in English that provide deeper insights into these knowledge areas and contribute to the development of best practices in project management and construction. Submissions may include theoretical analyses, computational models, experimental observations, or a combination of both theoretical …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto

Journal of Materials Exploration and Findings

This review studying the correlation between microstructural transformations and mechanical properties in reconditioned low-allow steel material, focusing on the impact of Submerged Arc Welding (SAW) parameters, especially current, on microstructure . The study highlights how variation on welding parameters, especially current intensity variation, affecting microstructural transformations, hardness, and wear resistance of hardfaced layers. Key aspects such as dilution effect, phases distribution, and carbide formation are reviewed to understanding their impact on mechanical properties. By reviewing insights from existing literature and experimental findings, this review underscores the role of Submerged Arc Welding in enhancing mechanical properties and microstructural of low-alloy steel …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Assembly Of Non-Close-Packed Poly(N-Isopropylacrylamide) Microgels On Metal Halide Perovskite Films, Amal Alruwaili, Osama M. Alkhudhari, Ran Wang, Zhenyu Jia, Jennifer M. Saunders, Eugenio Picheo, Daniel T.W. Toolan, L. Andrew Lyon, Brian R. Saunders

Engineering Faculty Articles and Research

Hypothesis

Experiments

Volumetric Imaging Of Cellular Dynamics Using Light-Sheet Microscopy: From Subcellular Structures To Whole Organisms, Md Nasful Huda Prince

Optical Science and Engineering ETDs

Advancing biomedical imaging requires platforms that combine high-resolution, speed, and stability across biological scales. This dissertation presents three innovations designed to address limitations of conventional light-sheet and oblique plane imaging. First, we introduce Reflected Inline Detection in Epi-Oblique Plane Microscopy (RIDE-OPM), a compact and drift-resistant system that eliminates a tertiary detection path while maintaining alignment flexibility, enabling robust long-term live imaging. Second, we present a high-speed Axially Swept Light-Sheet Microscopy (ASLM) platform for cleared tissues, using dual foci and synchronized sweeping to achieve isotropic sub-micron resolution at up to 40 frames-per-second, a fourfold improvement over standard ASLM. Integrated with a …

Enhanced Point Cloud Generation From A Novel 360° Underwater Lidar, Olagoke E. Daramola

Dissertations

This dissertation presents novel algorithms to improve the mapping capabilities of a 360-degree underwater Pulsed Laser Line Scanner LiDAR (PLLS-360°). Due to its 360° field-of-view (FOV), the PLLS-360° is a compact full-waveform omnidirectional imager suitable for seafloor mapping, underwater asset inspection, object detection, ice-sheet mapping, and construction progress monitoring. The proposed methodology includes an improved waveform fitting technique for saturated waveform recovery, detection array response correction, radiometric corrections, and fusion of LiDAR and sonar bathymetric datasets. The first part of this dissertation assesses the LiDAR’s performance and describes how the data for this unique 360° FOV architecture is processed. The …