Systems Engineering Commons^™

Manufacturing Systems: Characteristics And Dynamics, Alan J. Fitzmorris

Graduate Theses and Dissertations (2019 - present)

This research answers three basic questions. First, what are the behaviors (dynamics) of a manufacturing system in the context of system performance? Are these dynamics best described as linear deterministic, periodic, nonlinear deterministic, or stochastic? Second, what are the complexity (chaotic) characteristics of a manufacturing system, namely the maximal Lyapunov exponent, correlation dimension, and Kolmogorov-Sinai entropy? Third, is there a relationship between complexity characteristics and manufacturing system performance? This research involves four high level steps: data analysis, system dynamics analysis, system complexity analysis, and correlation analysis. The data analyzed consists of concrete plant and shipbuilding shop time series performance data. …

Harnessing Ml And Iiot For Traceability In Continuous Production Systems: A Conceptual Framework, Kholoud M. Abdelaal

Theses and Dissertations

In the era of rapid technological advancement, the manufacturing sector faces increasing pressure to leverage emerging technologies to enhance operational efficiency and minimize waste. In this context, traceability plays a pivotal role, as it provides complete visibility of processes and products throughout manufacturing systems, enabling them to identify areas for improvement and take corrective actions accordingly. Additionally, traceability ensures compliance, supports product recalls, provides a clear understanding of the system’s performance, and enables fact-driven decision-making in multiple aspects of the manufacturing system. Although the broad spectrum of traceability applications in batch production-based plants, traceability remains challenging to achieve in continuous …

Experiential Learning And The Revitalization Of Manufacturing Education At The University Of Dayton, Sean Cahill

Research and Reflection on Learning and Teaching in Higher Education

This perspective paper explores the role of experiential learning in preparing future-ready manufacturing engineers at the University of Dayton, set against the backdrop of Dayton’s legacy as an industrial innovator and the broader national movement to revitalize domestic manufacturing. As automation, cyber-physical systems, and Industry 4.0 technologies reshape the manufacturing landscape, there is a growing need for engineers who possess both technical fluency and systems-thinking capabilities. To meet this need, the manufacturing engineering technology department implemented hands-on, integrated lab-and-lecture modules through support from the Experiential Learning Innovation Fund for Faculty (ELIFF). Grounded in Kolb’s Experiential Learning Theory and constructivist learning …

Tradespace Exploration With Statistical Modeling Techniques And Immersive Visual Representation In Virtual Environments, Nikhil Raj

All Theses

Statistical modeling techniques combined with virtual reality (VR) visualization offer powerful new approaches to tradespace exploration in engineering design. The research presented addresses the challenge of analyzing and communicating insights from complex multidimensional datasets, particularly for autonomous ground vehicle systems.

Beginning with a review of statistical methods—including Principal Component Analysis (PCA), Analysis of Variance (ANOVA), and correlation analysis—the study examines their applications in tradespace exploration. Building on this foundation, three distinct visualization pathways connecting MATLAB data to virtual environments are developed and evaluated: VRML representation, STL conversion, and Blender integration. Each approach is assessed for its ability to maintain data …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

College of Graduate Studies: Theses & Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Accelerating Manufacturing Decisions Using Bayesian Optimization: An Optimization And Prediction Perspective, Taofeeq Olajire

Graduate Theses, Dissertations, and Problem Reports (ETD)

Manufacturing is a promising technique for producing complex and custom-made parts with a high degree of precision. It can also provide us with desired materials and products with specified properties. To achieve that, it is crucial to find out the optimum point of process parameters that have a significant impact on the properties and quality of the final product. Unfortunately, optimizing these parameters can be challenging due to the complex and nonlinear nature of the underlying process, which becomes more complicated when there are conflicting objectives, sometimes with multiple goals. Furthermore, experiments are usually costly, time-consuming, and require expensive materials, …

The Toyota Production System (Tps) In A Non-Traditional Manufacturing Environment: The Role Of Standardization In The Fast-Food Industry, Kevin Mccracken

Theses and Dissertations--Manufacturing Systems Engineering

The Toyota Production System (TPS), also known as Lean Manufacturing (LM), was founded in the automotive industry and has contributed to Toyota’s decades of success. This has brought much attention to TPS and how this system may be implemented in other industries. Focusing on the TPS foundational element of standardization, this study examines the impact of target cycle time (TCT) on process fluctuation in a fast-food environment. In order to observe the effects of TCT, team members within 3 production lines were timed. Times were measured before and after the addition of a TCT to the Standardized Work (STW) in …

Quantitative Methods For Total Lifecycle Risk Likelihood And Impact Assessment In Sustainable Product Design Decision Making, Christian Enyoghasi

Theses and Dissertations--Mechanical and Aerospace Engineering

Sustainable products promise significant economic, environmental, and societal benefits. Numerous methods are available for use during the new product development process to identify alternate product designs that optimize sustainability performance. Once any such design is selected and the product is launched, many uncertainties are likely to affect its performance over the total lifecycle. Such uncertainties give rise to risks that can influence the overall product sustainability performance. However, comprehensive quantitative methods to evaluate the likelihood or the impact of different risks to enable sustainable product design decision making are lacking.

This research aims to address this gap by developing a …

Handling Of Stealthy Sensor And Actuator Cyberattacks On Evolving Nonlinear Process Systems, Henrique Oyama, Keshav Kasturi Rangan, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Cyberattacks on control systems in the chemical process industries cause concern regarding how they can impact finances, safety, and production levels of companies. A key practical challenge for cyberattack detection and handling using process information is that process behavior evolves over time. Conceivably, changes in process dynamics might cause some detection strategies to flag a change in the dynamics as an attack due to the new data appearing abnormal compared to data from before the dynamics changed. In this work, we utilize several case studies to probe the question of what might be the impacts, benefits, and limitations of cyberattack …

Generic Design Methodology For Smart Manufacturing Systems From A Practical Perspective, Part I—Digital Triad Concept And Its Application As A System Reference Model, Zhuming Bi, Wen-Jun Zhang, Chong Wu, Chaomin Luo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

Rapidly developed information technologies (IT) have continuously empowered manufacturing systems and accelerated the evolution of manufacturing system paradigms, and smart manufacturing (SM) has become one of the most promising paradigms. The study of SM has attracted a great deal of attention for researchers in academia and practitioners in industry. However, an obvious fact is that people with different backgrounds have different expectations for SM, and this has led to high diversity, ambiguity, and inconsistency in terms of definitions, reference models, performance matrices, and system design methodologies. It has been found that the state of the art SM research is limited …

Generic Design Methodology For Smart Manufacturing Systems From A Practical Perspective. Part Ii—Systematic Designs Of Smart Manufacturing Systems, Zhuming Bi, Wen-Jun Zhang, Chong Wu, Chaomin Luo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

In a traditional system paradigm, an enterprise reference model provides the guide for practitioners to select manufacturing elements, configure elements into a manufacturing system, and model system options for evaluation and comparison of system solutions against given performance metrics. However, a smart manufacturing system aims to reconfigure different systems in achieving high-level smartness in its system lifecycle; moreover, each smart system is customized in terms of the constraints of manufacturing resources and the prioritized performance metrics to achieve system smartness. Few works were found on the development of systematic methodologies for the design of smart manufacturing systems. The novel contributions …

An Analysis Of Resistance Spot Weld Quality Based On Acoustic And Electrical Signatures, Ivan Charles Butler

Theses and Dissertations--Manufacturing Systems Engineering

The union of a set of materials by way of Resistance Spot Welding is designed so that once fused together, a substantial amount of intentional, external force must be applied to separate the contents. Therefore, Resistance Spot Welding is often the preferred fusion method in high-volume manufacturing processes. The result of Resistance Spot Welding however is the formation of a weld nugget which is not visible to the naked eye. Destructive and/or ultrasonic methods applied off-line must be used to determine the quality of each weld; both inefficient and expensive processes. The following research analyzes the data fed back during …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports (ETD)

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …

Built-In Bicycle Rack For Cars, Scott A. Hansberry

All Undergraduate Projects

Transporting a bicycle after riding somewhere and then needing to be pickup can be problematic. Bicycles will not fit in most vehicles without removing components. There is also the risk of damaging the inside of the vehicle. Expecting everyone to have a bike rack for their vehicle is unrealistic because the bike rack could be considered unappealing visually, take up to much space in the trunk, or limit the vehicle owner’s access to the trunk. The solution to this problem is a bike rack that mounts onto your car and then mounts your bike onto the rack. Most people don’t …

Creating A User-Friendly Personal Wine Collection Inventory Management System, Peter Loddengaard

Industrial and Manufacturing Engineering

This project set out to create a user-friendly wine collection management software. Existing systems were reviewed and discussions with collectors took place to establish the user requirements for this type of inventory management system. This led to the scope of the project being narrowed to making a wine bottle entry form that was quick and easy to use. The programming language, Ruby on Rails, was used to design this system, and learning the software was a large part of the project itself. It was established that four forms would be designed using combinations of two ergonomic factors: an “F” shaped …

Frito-Lay - Supply Chain Impact Analysis, Kerri Blosch, Vincent Phua, Jeffrey Silva

Industrial and Manufacturing Engineering

The snack food company Frito-Lay relies on Route Sales Representatives (RSRs) to stock and maintain shelves of snack foods in every store. Frito-Lay currently does not have a system which can accurately predict cannibalization, or the effects of a store opening or closing on other stores of the same chain in the area. The goal is to sort through 1900 stores in a given metropolitan area to see the effects of cannibalization. In order to tackle the problem, a Microsoft Access program was created to filter stores based on location or whether the store was open for the full three-year …

Process Testing And Improvement Of Tapping Machinery At Lisi Aerospace, Michael James Hester

Industrial and Manufacturing Engineering

This report documents my senior project for California Polytechnic State University San Luis Obispo. I have chosen to do a senior project with Lisi Aerospace. Lisi would like to compare the manufacturer rated cycle count of taps versus an experimental one based on our machines in house. My goal for this project would be to run an experiment on one tapping machine and report on the achievable cycle count for the taps. I plan to do this in several ways including:

• Running extra cycle counts above tap manufacturer recommendations

• Documenting machine failure modes

• Create a process document to be repeated …

  ---

  Go to article

Improving Advertisement Recognition And User Interface Of Gameofwarrealtips.Com, Chad Kihm, Alexander Meyer

Industrial and Manufacturing Engineering

The purpose of this experiment was to determine which location of advertisement would be the most recognized on the Game of War Real Tips website and to improve the website’s user interface by using both quantitative and qualitative data. To accomplish this, two experiments were created. The first experiment was designed to determine which location of advertisement would be recognized most by users. A screen would flash for 0.5 seconds and the subjects would mark where they believed they recognized an advertisement. A statistical analysis was completed to determine whether the location of the advertisement had an effect on the …

Wine Club Shipment Package Redesign, Emily E. Prescott

Industrial and Manufacturing Engineering

This report shows the design, manufacturing, and testing process for the product development of a wine club shipment package for Niner Wine Estates. Niner has two different shipment sizes, 4 bottles and 6 bottles, and wishes to improve their current package by giving it a more “high-class” feel. After the new package was designed and prototyped, it went through standardized quality testing to be cleared for commercial use. This testing is intended to simulate the distribution cycle the package will experience and subject it to potential hazards such as being dropped and vehicle vibration during transportation.

After the package passed …

A Framework For Sustainable Material Selection For Multi-Generational Components, Ryan T. Bradley

Theses and Dissertations--Mechanical and Aerospace Engineering

The early stages of a product’s design are a critical time for decisions that impact the entire life-cycle cost. Product designers have mastered the first generation; however, they currently do not have the ability to know the impact of their decisions on the multi-generational view. This thesis aims at closing the gap between total life-cycle information and the traditional design process in order to harbor sustainable value creation among all stakeholders involved. A framework is presented that uses a combination of a life-cycle costing methodology and an evolutionary algorithm in order to achieve a sustainability assessment for a true multi-generational …

2d Wireform Process Improvement, Katy Conlin, Carlo Ebora, Jordan Gamble

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

Lean Fire Management: A Focused Analysis Of The Incident Command System Based On Toyota Production System Principles, Jeremiah S. Fugate

Theses and Dissertations--Mechanical and Aerospace Engineering

A primary role of the Incident Command System is to learn from past incidents, as illustrated by its origins in the wildland firefighting community. Successful emergency response operations under the Incident Command System has prompted its nationwide spread, this promulgation critically relies on the system’s capability to stabilize and continuously improve various aspects of emergency response through effective organizational learning. The objective of this study is to evaluate the potential to apply fundamental principles of the Toyota Production System (Lean manufacturing) to improve learning effectiveness within the Incident Command System. An in-depth review of literature and training documents regarding both …

Ground Support Equipment For Northrop Grumman Massive Heat Transfer Experiment, Michael A. Manuel, Christopher J. Sparber, Greg A. Trent

Aerospace Engineering

California Polytechnic State University students designed, built, and certified ground support equipment for the Northrop Grumman Massive Heat Transfer Experiment. The Cal Poly design team built the 10000, 20000, and 30000 assemblies to meet Northrop Grumman requirements. The requirements included interface limitations, design load factors, delivery, and testing specifications. The design process consists of requirements generation, conceptual design, preliminary design, design reviews, manufacturing, and certification. The hardware was successfully completed and is used at the Johnson Space and Kennedy Space Center.

Design For Manufacturing Of Sports Equipment, Cedrick Bit, Christopher L. Head

Industrial and Manufacturing Engineering

The purpose of this project was to validate industrial designs for a product in its conceptual stage and suggest/implement design changes that suit the contracting company’s needs while assuring the product maintains its basic functional requirements. Techniques and methods used to validate the design include 3‐D solid modeling, physical product application using rapid prototyping to produce the product. Methods of design for manufacturing were analyzed in the design. Processes used in the validation and verification of the design include solid modeling design, methods of measurements, fixture design and manufacturing processes. Full design specifications and solid model files were finalized and …

Case Studies On Usage Of Axiomatic Design Methodology In The U.S. Industries, Alireza Alavizadeh

All-Inclusive List of Electronic Theses and Dissertations

Axiomatic Design, originally developed by Nam Suh, is a design methodology that attempts to systematize the design practices and to provide a basis on which design can be carried out and optimized according to two main axioms, namely, Independence and Information axioms. Although various scholars in both academia and industry have studied the applicability and effectiveness of this methodology, the extent to which Axiomatic Design has been implemented in industry, particularly in the U.S., is unknown. l1l This study was conducted to identify the extent to which Axiomatic Design is known to the U.S. industries. Other purposes of this study …

Leanness And Agility In Job Shops: A Framework For A Survey Instrument Developed Using The Delphi Method, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

Manufacturers are facing new challenges as competition has become global. Manufacturing companies arc looking for strategies which would help them gain an edge over their competitors. In the United States, lean manufacturing and agile manufacturing have been gaining importance among industries. Agile manufacturing was developed when the United States Department of Defense (DOD) requested Iacocca Institute at Lehigh University to develop a manufacturing framework that could give US companies an edge over their worldwide competitors whereas lean manufacturing has its roots tied to the Toyota Production System (TPS). This raises the questions: what is the clear difference between the two …

Combining Systematic Layout Planning And Computer Simulation In The Design Of Manufacturing Facilities, Akintoye M. Akinyoade

All-Inclusive List of Electronic Theses and Dissertations

In this study, the systematic layout planning (SLP) and computer simulation were combined to improve the layout design of a manufacturing facility using a case study.

A Comparative Study On Projected And Actual Manufacturing Times To Identify The Source Of Customer Delinquency, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

This study was an investigation of the projected lead time and the actual lead time for a part manufactured at Tri-Industries Inc., Terre Haute, Indiana. The research was focused on a single part produced in Tri-Industries. The problem was that there is a difference in the projected lead time and the actual lead time of the part under investigation. The actual lead time was longer than projected lead time, which resulted in the company being delinquent in customer delivery. This investigation was conducted to find out the source for customer delinquency for a single part in Tri-Industries. The conclusion was …