Operations Research, Systems Engineering and Industrial Engineering Commons^™

Exploring Consultancy-Related Variations In Public Building Projects: A Review Towards A Management Framework, Grayson Bambaza, Ismail W. R. Taifa, George S, Mwaluko

Tanzania Journal of Engineering and Technology (TJET)

Consultancy-related variations remain one of the leading causes of cost overruns, schedule delays, quality deficiencies, and contractual disputes in public building projects. Although various studies have been undertaken to document the causes of variations in construction works, the same level of interest has not been shown for consulting services variations across the consulting services spectrum and their consequences for effective management. This study explores variations in consulting services for public works by systematically reviewing the existing literature using the PRISMA (Preferred Reporting Items for Systematic reviews and Meta Analyses) guidelines. Relevant articles published from 2020 to 2026 were retrieved from …

Urban Spatial Development Control In Tanzania: Analysis Of Factors Influencing Gis Application Using Structural Equation Modelling (Sem)., Happiness Protas Mmanda, Nestory Yamungu

Tanzania Journal of Engineering and Technology (TJET)

Rapid urbanization in developing countries has intensified urban expansion, creating challenges for sustainable development. Geographic Information Systems (GIS) enhance spatial planning, but empirical evidence on factors influencing their effectiveness remains limited. This study examines determinants of GIS application in Urban Spatial Development Control (USDC). The objectives are to (1) identify and categorize factors affecting GIS use, (2) assess relative strength, and (3) develop a validated structural model explaining GIS adoption in USDC. Data were collected from 103 LGAs by a mixed sampling method. Exploratory and Confirmatory Factor Analysis classified influencing factors into technology-related (α = 0.869, CR = 0.881), process-related …

Enhancing Community Engagement Through ‘Nitunze Kilombero’ Mobile App: Case Of Climate Land Use And Cover Management For Kilombero Basin, Ghanima Chanzi, Subira Munishi

Tanzania Journal of Engineering and Technology (TJET)

The Kilombero Basin in southeastern Tanzania faces significant challenges due to rapid land use and land cover (LULC) changes driven by climate change, population growth, and unsustainable farming practices. This study assessed the role of community engagement and digital reporting through the 'NITUNZE KILOMBERO', mobile application in supporting water resources management in the basin. The App facilitates real-time reporting of environmental issues, provides educational resources, and enables collaboration between local communities and authorities. A mixed-methods approach, including household surveys and key informant interviews, was employed to assess the app's effectiveness. Results indicate high community awareness of LULC impacts, with 85% …

Load Flow And Fault Performance Evaluation Of Interconnected Minigrids In Uganda Using Digsilent Powerfactory, Prossy Mutesi, Santos Kihwele, Emmanuel Matee

Tanzania Journal of Engineering and Technology (TJET)

The increasing demand for decentralized, reliable electricity in rural Sub-Saharan Africa has catalyzed the deployment of minigrids as an intermediate electrification strategy. This study investigates two solar photovoltaic (PV) mini-grids: Kyamugarura and Kanyegaramire, located in western Uganda, approximately 3km apart. Each mini grid initially consisted of 13 kW installed photovoltaic (PV) capacity, supplying power to households and small businesses. Due to rising demand and regular evening blackouts, both mini-grids are being upgraded to 57 kWp each. The integration of these upgraded systems into the national utility grid is proposed and simulated to evaluate performance improvements under two medium-voltage interconnection options: …

A2s Uplink Latency Minimization For Wildfire Monitoring Systems Using Mbse And Stochastic Modeling, Luis Giovanni Wang

Master's Theses

Wildfire response depends on how quickly a detection reaches the people who act on it, and the slowest remaining step is often the link that carries an alert from a remote sensing platform to a satellite. This thesis models the latency of that link, the Air-to-Space uplink, for a wildfire-monitoring UAV that carries a Starlink terminal and sends an ALERT packet to a serving Low Earth Orbit satellite. The uplink is difficult to predict because both the UAV and the satellite move, and because the wildfire environment degrades the channel at the moment the data matters most.

The thesis uses …

Digital Lean Transformation Through Mes–Scada Intergration: Reducing Transactional And Cognitive Waste In High-Volume Electronics Manufacturing, Kamal Alalul

Graduate Dissertations and Theses

This research addresses inefficiencies in Manufacturing Execution System (MES)-driven workflows, where excessive user interactions and fragmented access to work instructions introduce transactional and cognitive waste. To address these limitations, an integrated architecture was developed using Ignition as a SCADA-based operator interface connected to the MES through API-based communication. The system replaces direct MES interaction with a unified interface that embeds work instructions and automates transaction execution within the production workflow. The approach was implemented and evaluated through an industrial case study on a 15 station electronics manufacturing line. Results show a 51% reduction in total cycle time, decreasing from 2,996 …

Reflective Analysis Of Industrial Engineering Leadership Skills Applied In Being A Capstone Team Leader, Sarah Nesmith

Industrial Engineering Undergraduate Honors Theses

This paper presents a reflective analysis of leadership skills that I, Sarah Nesmith, have acquired and applied as an honors student serving as a capstone team leader within the Industrial Engineering program at the University of Arkansas. My senior capstone project is in partnership with Walmart’s Transportation and Optimization Department and focuses on identifying the root and contributing causes of empty miles (miles driven without freight on a truck) and exploring backhaul opportunities. The ultimate goal is the development of a tool or method that can identify these opportunities to save money while maintaining service level. As the appointed team …

Threat-Analysis Oriented Digital Twinning Of Ml-Powered Future Autonomous Weapon Systems, Thomas Neubert

Doctoral Dissertations and Master's Theses

Warfare is undergoing a rapid transformation with the integration of artificial intelligence (AI) and machine learning (ML) into autonomous weapon systems (AWS) for perception, decision support, and control. As these systems become more software-defined, their cyber attack surface expands across sensing, communications, autonomy logic, and human-machine interfaces. As human oversight diminishes, ensuring the cybersecurity, resilience, and reliability of these systems becomes critical to mission success. This thesis investigates how a digital twin-driven threat modeling framework that integrates system-centric analysis with adversary-informed methodologies can support structured cybersecurity vulnerability evaluation and defensive strategy development associated with ML-powered AWS. First, the study analyzes …

Ai-Scm Cmm: A Capability Maturity Model For Artificial Intelligence Integration In Supply Chain Management, Lordt Becklines, Omar F. El-Gayar, Patti Brooks, Insu Park

Annual Research Symposium

Artificial intelligence is increasingly deployed in supply chain management, yet many organizations struggle to align adoption efforts with process readiness, data quality, governance, and workforce capabilities, and they still lack validated supply chain specific roadmap for assessing readiness, sequencing investments, and reducing implementation risk. This study develops and evaluates a Capability Maturity Model for Artificial Intelligence Integration in Supply Chain Management to address that gap. Using a design science research approach, the study synthesizes prior literature and practitioner knowledge to define maturity dimensions, capability indicators, and staged progression levels for AI integration in supply chain contexts. The artifact and assessment …

Calibration Of Time-Domain Impedance Probe (Tdip) To Investigate Space Plasma Dynamics During Periods Of Ionospheric Instability, Piyas Chowdhury, Soumyajit Dey, Edmund A. Spencer

Shelby Hall Graduate Research Forum Posters

The traditional Plasma Impedance Probe (PIP) is popular for diagnosing parameters of the ionospheric plasma to study the space environment. However, the resolution of data measurements of existing PIP instruments, operating at higher frequencies, limits the analysis to studying the plasma features at electron scales. Studying plasma ion parameters is essential to understanding the ionospheric instability growth rates. This can only be accomplished by operating a diagnosing instrument at lower frequencies corresponding to ion scales. A recently developed Time Domain Impedance Probe (TDIP) is implementable for fast moving spacecraft using a time domain approach. The instrument has higher measurement resolution …

Aurora – Autonomous Urban & Rural Optimization And Resilience Architecture, Ninad Pandit

Shelby Hall Graduate Research Forum Posters

Problem statement: Undetected systemic “leaks” within large-scale food distribution networks result in severe post-harvest perishable losses and critical nutrient degradation.

A Capability Maturity Model For Artificial Intelligence Integration In Supply Chain Management, Lordt Becklines

Dissertations

Artificial Intelligence (AI) is transforming Supply Chain Management (SCM), yet many organizations struggle to assess their readiness for AI adoption and to understand how AI capabilities develop across maturity stages. This dissertation addresses this gap by developing a Capability Maturity Model (CMM) for AI integration in SCM, grounded in Organizational Information Processing Theory (OIPT), the Resource-Based View, and related capability frameworks. The model provides a structured approach for evaluating an organization's information-processing requirements, resource configurations, and alignment needed for effective AI-enabled supply chain operations.

Using a design science research approach, the AI-SCM CMM and its associated assessment instrument were derived …

Green Roofs For Grey Water Treatment – Comparative Study Of Economic And Environmental Impacts, Shaden S. Attia

Theses and Dissertations

Cities are under more pressure than ever to use sustainable methods for managing water and other resources because of urbanization, climate change, and a lack of water. Standard greywater treatment systems (SGTSs) work well, but they use a lot of resources and don't provide a lot of ecosystem services. Greywater-treating green roofs (GTGRs) have emerged as a promising Nature-Based Solution (NBS), combining wastewater recycling with benefits like regulating temperature, reducing greenhouse gas (GHG) emissions, and reducing the urban heat island (UHI) effect. Even with this potential, there is still not enough real-world research on how GTGRs affect both the economy …

Harnessing Ml And Iiot For Traceability In Continuous Production Systems: A Conceptual Framework, Kholoud M. Abdelaal

Theses and Dissertations

In the era of rapid technological advancement, the manufacturing sector faces increasing pressure to leverage emerging technologies to enhance operational efficiency and minimize waste. In this context, traceability plays a pivotal role, as it provides complete visibility of processes and products throughout manufacturing systems, enabling them to identify areas for improvement and take corrective actions accordingly. Additionally, traceability ensures compliance, supports product recalls, provides a clear understanding of the system’s performance, and enables fact-driven decision-making in multiple aspects of the manufacturing system. Although the broad spectrum of traceability applications in batch production-based plants, traceability remains challenging to achieve in continuous …

Warehouse Reconfiguration With Ats Lab, Ed Cantor, Dana Pazhouhesh, Mathew Oshinski, Samantha Sanchez

Senior Design Project For Engineers

The ATS Lab Warehouse Reconfiguration project is a collaborative effort between Kennesaw State University’s Department of Industrial and Systems Engineering and ATS Lab, located in Marietta, GA. The goal of this project is to redesign the current warehouse layout to enhance operational efficiency, reduce travel time, and implement sustainable inventory management practices, including 5S and Kanban. Aaron Roob, ATS Operations Manager, and Franklin Hungerford, Continuous Improvement Manager, led this initiative. Our team, “Sick Sigma’s,” is composed of Ed Cantor, our Project Manager, who is working as an intern at ATS during this process; Dana Pazhouhesh (Process Engineer); Matthew Oshinski (Quality …

(R2120) Flexible Group Service Map/Ph/1 Queueing Model With Working Vacation And Optional Service, G. Ayyappan, S. Kalaiarasi

Applications and Applied Mathematics: An International Journal (AAM)

There are many uses of queues, where services are provided in groups; these types of queues are widely studied in the literature. In this paper we examine a particular queueing model wherein the services are provided in groups and the group size may be less than or equal to the size initially fixed. The arrival follows a Markovian arrival process. The service time of each individual customer follows phase type distribution. The maximum of each customer’s individual service time within a group is defined as the group’s service time. At the service completion moment if there are fewer customers than …

Condition Optimization For The Synthesis Of Castor Oil Templated Mesoporous Silica, Godlisten Namwel Shao

Tanzania Journal of Engineering and Technology (TJET)

The present work provides suitable conditions for the synthesis of mesoporous materials with improved porosity using an optimization technique. The proposed preparation method involves forming final products by varying the amount of castor oil, media, and template removal. The obtained samples were examined by TGA, XRD, DRIFT and nitrogen physisorption studies. It was observed that the porosity of the obtained samples was dependent on the conditions under which the materials were synthesized. All synthesized materials showed the Type IV adsorption-desorption isotherm features of mesoporous, regardless of the conditions utilized during the synthesis. The sample synthesized using 2.5 g of a …

Adoption Of Agrivoltaics In Developing Countries: A Review On Challenges, Opportunities And Future Prospects, Abdi J. Athumani, Pater Makolo

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a review of agrivoltaics technology and how it has been applicable in developing countries, including African countries. Agrivoltaics, the integration of agricultural production with photovoltaic energy generation, offers promising solutions to water- energy-food nexus in developing countries. This technology offers the dual benefit of increasing agricultural productivity while generating clean energy, which is very important for regions facing frequent electricity shortages and declining agricultural yields due to climate change. However, despite its potential, the adoption of agrivoltaics in developing nations remains limited in comparison to developed countries due to financial, technical and policy constraints. This paper explores …

Cnn-Based Hybrid Model For Detecting Blight Diseases In Potato Crops With Advanced Image Processing Techniques, Farian S. Ishengoma

Tanzania Journal of Engineering and Technology (TJET)

Potato production plays a vital role in global agriculture as a major food source for large populations. However, potato crops are highly susceptible to diseases, particularly Early Blight and Late Blight, which result in substantial yield losses. Timely detection and effective control of these diseases are essential for maintaining stable crop output. This study explores the integration of Convolutional Neural Networks (CNNs) and advanced image processing techniques to differentiate between diseased and healthy potato plants accurately. Two datasets comprising original and enhanced images were used to train four CNN models: InceptionV3, Xception, Densenet201, and Resnet152V2. The original images underwent background …

Resilience Engineering Via Bifurcation And Ecological Network Analysis: Demonstrated In An Electric Power Case Study, Rogelio Gracia Otalvaro

Doctoral Dissertations and Master's Theses

Modern systems are increasingly complex, interconnected cyber-physical systems that combine digital controls with physical infrastructure. This integration, along with the constant introduction of new technologies and actors into the network, enables reliable operation but introduces vulnerabilities to unexpected and varied disruptions and cascading failures, making resilience a critical concern. Traditional risk management and resilience assessment methods often struggle with the nonlinearity and dynamic behavior of these systems. This dissertation proposes a novel approach combining Bifurcation Analysis (BA) and Ecological Network Analysis (ENA) to enhance the understanding and improvement of system resilience. BA, a mathematical method from dynamical systems theory, is …

A Review Of The United States' Long Term War Support Capabilities In The Indo-Pacific Command Region, Brian J. Mullin Jr.

Theses and Dissertations

This study examines U.S. maritime transportation readiness in the Indo-Pacific, highlighting fleet age, mariner shortages, shipyard decline, and port vulnerabilities. It also considers contested logistics and technological threats. Recommendations include fleet recapitalization, mariner pipeline growth, port diversification, and defensive upgrades. The study concludes that secure sea line assumptions are outdated and calls for greater resilience, with follow-on efficiency analysis proposed for ports and ships.

Understanding The Elements Of Sterile Processing Workflow: Or, Sterilization And Personnel, Sayed Rezwanul Islam

All Dissertations

The Sterile Processing Department (SPD), also known as the Central Sterile Services Department (CSSD), is an essential part of hospitals and healthcare facilities and is responsible for ensuring the cleanliness, sterility, and proper functioning of medical instruments. Sterile processing departments (SPDs) are key drivers of productivity, effectiveness, safety, and infection control in hospitals. A well-designed SPD workflow can enhance patient safety, reduce operating room (OR) delays, and improve productivity. To understand the flow of sterile processing and interactions between the OR and SPD, process maps and task analyses were developed through direct observations of the basic SPD functions: decontamination, assembly, …

Effects Of Variation In Altitude And Temperature On The Restraining Force And Internal Gauge Pressure Of Constrained Dunnage Airbags, Charles R. Weaver

All Theses

Dunnage airbags are an increasingly popular choice for securing cargo. During transit, changes in ambient temperature and pressure can cause airbags to expand generating damaging horizontal compressive forces in the trailer or container. Previous studies have developed numerical models for the behavior of Kraft paper and woven polypropylene fabric dunnage airbags under standard conditions but do not account for the behavior of airbags under varied altitudes and temperatures. This study provides empirical data on the internal gauge pressure and restraining force dynamics of 4-ply Kraft, woven polypropylene, and polyvinyl chloride airbags under simulated altitude and temperature conditions. Tensile testing characterizes …

Algorithms For Combined Regular Synthesis Of Controller Parameters In Control Systems For Dynamic Objects, Khusan Zakirovich Igamberdiev, Latafat Abbas Gizi Gardashova, Yulduz Mukhtarkhodjayevna Abdurakhmanova, Uktam Farkhodovich Mamirov

Technical science and innovation

Nonlinear control system that includes m-dimensional input control signal and extended (n+s) - dimensional state vector, the last s components of which form a vector of unknown parameters θ satisfying a general difference equation is being considered. The quality criterion is determined by the loss function. The optimal control must satisfy the Bellman equation with respect to the optimal loss function. To be defined an approximate solution that preserves an active use of information. For this purpose, the system is linearized in accordance to the nominal trajectory. This problem is seen as incorrectly stated. The values of the preliminary data …

Navigating Perceptions: How Organizational Type And Message Source Affect Willingness To Fly In Automated Air Taxis, Cody James Sweatt

Doctoral Dissertations and Master's Theses

A new era of transportation and business is beginning to emerge. Advanced air mobility (AAM), which uses highly automated aircraft that transport passengers and cargo in the underutilized, low-altitude airspace above and around urban areas, is rapidly becoming a reality (FAA, 2023). These new companies will utilize air taxis, which are automated, electric, vertical takeoff and landing (eVTOL) aircraft and will potentially foster a revolutionary new commerce infrastructure. Unfortunately, it is not currently understood how the credibility of a message source or specific type of organization that owns and operates an automated air taxi company influences a customer’s willingness to …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Mechanical Properties Of Pineapple Braided Fabric Reinforced Epoxy Matrix Composite Fabricated Via Vacuum-Assisted Resin Infusion Moulding, Bwire S. Ndazi

Tanzania Journal of Engineering and Technology (TJET)

Fibres and fabrics obtained from lignocellulosic materials have attracted attention as reinforcements in polymer composites due to their competitive mechanical and ecological benefits. While the potential of randomly oriented pineapple leaves fibres (PALF) in composites have explored in previous studies, the mechanical behaviour of braided PALF fabric composites fabricated via vacuum-assisted resin infusion moulding (VARIM) remains relatively unexplored. In this study the tensile, compression and flexural strengths of epoxy-based composite containing 40 vol.% braided pineapple fabrics, fabricated using VARIM, for load carrying applications were investigated. The results revealed that the three-layered unbleached pineapple braided fabric composites exhibited a tensile strength …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Thermal Energy Storage System Using Silica Sand As Heat Storage Medium: Simulation Of Geita Gold Mine, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

Currently, Geita Gold Mine (GGM) relies on electrical energy from the national grid and diesel power generators to generate electricity for various industrial applications. The plant currently spends a large amount of money on generating power from diesel generators. The total annual cost of power generation from diesel generators including lubricants is USD 56,057,990. The total annual fuel cost is USD 53,531,805 for a total of 54,985,473 liters per year. Most of the power generated by the generators is consumed in the industrial thermal processes. Thermal energy applications at the plant are thermal drying of the extracted ores to remove …

Wet Gas Metering Performance Using Conventional Flow Measurement Devices, Vitali Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The demand for and production of natural wet gas from wells has significantly risen in recent years. Although natural gas liquids hold substantial value in the oil and gas market, their presence in wet gas adversely affects gas metering, leading to overreading during measurement. A comprehensive study has been undertaken to formulate and enhance correlations for rectifying overreading in wet gas metering. Nevertheless, most current correlations are designed for horizontal configurations of traditional meters. Mitigating this constraint is crucial to consider the impact of gravity on pressure loss in vertically oriented systems. This study seeks to evaluate the efficacy of …