Operations Research, Systems Engineering and Industrial Engineering Commons^™

Industrial Design, Husnain Khan

Publications and Research

Universal design is important because it helps with diverse disabilities. What is universal design and why do we need it? People design buildings, products or environments to make them accessible to people in need. Also, it minimizes the need for assistive technology, results in products compatible with assistive technology, and makes products more usable by everyone. Where can universal design be found? It's practical everywhere you go, such as public transport, parks, shops and services, and sidewalks. Universal design is affected by Several categories: people with disabilities, who are perhaps the most visible group affected by universal design, and parents …

Automation Complacency On Humans And Cyber-Physical Systems In The Energy Sector, Shannon Olaveson

Cyber Operations and Resilience Program Graduate Projects

Cyber-physical systems (CPS) and the Industrial Internet of Things (IoT) enable industrial systems and technology to work together to achieve increased connectivity and operational efficiency through the use of automation. Because automation requires less human interaction to run industrial tasks, a reliance may form on this integration to take over an otherwise manual process. This reliance can cause human behavior to affect operational safety and security, leading to unintentional outcomes or vulnerable areas of adversarial opportunity. The energy sector is one of the most critical infrastructure areas becoming a part of the rise to automation, resourcing gas, oil, and electricity …

Numerical Study Of Solar Receiver Tube With Modified Surface Roughness For Enhanced And Selective Absorptivity In Concentrated Solar Power Tower, Shawn Hatcher, Mathew Z. Farias, Jianzhi Li, Peiwen Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Concentrated solar power (CSP) is a reliable renewable energy source that is progressively lowering its cost of energy. However, the heat loss due to reflected and emitted radiation hinders the maximum achievable thermal efficiency for solar receiver tubes on the solar tower. Current solar selective coatings cannot withstand the high temperatures that come with state-of-the-art CSP towers often needing to be recoated soon after initial operation. We intend to use Inconel 718 with different additive manufacturing (AM) practices to construct surfaces that allow for more light-trapping to occur. By adjusting printing parameters, we can tailor a surface to allow for …

Laser-Induced Forward Transfer (Lift) Based Bioprinting Of The Collagen I With Retina Photoreceptor Cells, Md Shakil Arman, Ben Xu, Andrew Tsin, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications and Presentations

This study focuses on the 3D bioprinting of retina photoreceptor cells using a laser-induced forward transfer (LIFT) based bioprinting system. Bioprinting has a great potential to mimic and regenerate the human organoid system, and the LIFT technique has emerged as an efficient method for high-resolution micropatterning and microfabrication of biomaterials and cells due to its capability of creating precise, controlled microdroplets. In this study, the parameters for an effective femtosecond laser-based LIFT process for 3D bioprinting of collagen biomaterial were studied. Different concentrations of collagen I solutions were tested and 0.75 mg/ml to 1 mg/ml collagen Ⅰ was identified as …

Estudio Termoquímico Asistido Por Computadora De Los Polifenoles Presentes En La Fresa [Thermochemical Computer Assisted Study Of Polyphenols Presented In Strawberry], Federico Lopez, Jeimmy Rocio Bonilla Méndez, Luis Ricárdez Sandoval, Hiram Moya, Daniela Mainardi, Arturo González Quiroga, Jeffrey Leon-Pulido

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Las fresas son un alimento importante en Latinoamérica debido a sus componentes químicos, puesto que son una considerable fuente de calorías y polifenoles. Estos elementos son útiles por su capacidad antioxidante y otras propiedades beneficiosas para la salud. Sin embargo, la presión y la temperatura pueden llegar a afectar la integridad molecular de estos componentes, por lo tanto, en el proceso de producción de diferentes productos basados en fresas, se requiere estudiar las propiedades termoquímicas de los diferentes polifenoles presentes en esta fruta. Para ello, se extrajeron datos de las principales familias de polifenoles, antocianinas, flavanoles, flavonoles, ácidos hidroxibenzoicos y …

Electrical Vehicle Charging Infrastructure Design And Operations, Yu Yang, Hen-Geul Yeh

Mineta Transportation Institute

California aims to achieve five million zero-emission vehicles (ZEVs) on the road by 2030 and 250,000 electrical vehicle (EV) charging stations by 2025. To reduce barriers in this process, the research team developed a simulation-based system for EV charging infrastructure design and operations. The increasing power demand due to the growing EV market requires advanced charging infrastructures and operating strategies. This study will deliver two modules in charging station design and operations, including a vehicle charging schedule and an infrastructure planning module for the solar-powered charging station. The objectives are to increase customers’ satisfaction, reduce the power grid burden, and …

Experimental Investigation Of Various Energy-Absorbing Layer Materials And Sodium Alginate Viscosities On The Jet Formation In Laser-Induced-Forward-Transfer (Lift) Bioprinting, Shuqi Zhou, Chaoran Dou, Jianzhi Li, Qiqi Zhang, Qilin Dai, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Laser-induced-forward-transfer (LIFT) bioprinting technology has been viewed as a regenerative medicine technology because of its high printing quality and good cell viability. To stabilize the jet to achieve high-quality printing, an energy-absorbing layer (EAL) can be introduced. In this study, three materials (graphene, gelatin, and gold) were utilized as the EAL. The effect of each EAL on the jet generation process was investigated. Besides, the effect of graphene EAL thickness was addressed for various experimental conditions. The jet generation process using sodium alginate solutions with different concentrations (1 and 2 wt. %) was also discussed to investigate the effect of …

The Development And Use Of The Probabilistic Financial Decision Model For A Company Expansion, Elizabeth Wiese

Senior Honors Theses

In the United States, companies are expanding constantly. However, in an industrial equipment dealership expanding into a new state, it is important to understand the industry, new market, and costs associated with expanding. With using financial statements of data-backed percentages for growth, research seeks to set up a financial model to see if expansion for an industrial equipment dealership into the state of North Carolina will be a financially wise decision. Wesley Worldwide, an industrial equipment dealership, is moving forward with the investment of expanding into North Carolina. However, it is vital to understand the financial predictions for profit return …

Experimental Investigation Of The Self-Healing Potential Of Bacteria For Sustainable Concrete Structures, Pitiporn Asvapathanagul, Simone Galano, Andrea Calabrese, Mehran Rahmani, Maggie Ly, Daniela Flores, Michael Hernandez, Nicholas Banuelos

Mineta Transportation Institute

Although concrete is the most widely used building material in the world, its limited tensile strength makes cracking a common phenomenon in concrete elements. This study investigates the potential of autonomous self-healing as an eco-friendly and lowcost method to increase the durability of concrete. The crack-healing potential of different types of high-alkaline-tolerant bacteria or calcite-precipitation microorganisms is investigated. High-alkaline-tolerant bacteria and calcite-precipitation microorganisms were used to retrofit lab-fractured concrete samples. The samples healed with each of these bacteria groups were cast and tested under compressive load up to failure to measure the compressive strength of the concrete samples. The outcomes …

Naphtha Characterization (Piona, Density, Distillation Curve And Sulfur Content): An Origin Comparison, Aline Pioli Silva, Juliana Otavia Bahú, Renato Soccol Jr., Leonardo Rodriguez-Urrego, William Stive Fajardo-Moreno, Hiram Moya, Jeffrey Leon-Pulido, Víktor Oswaldo Cárdenas Concha

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Naphtha is an important distillation product of crude oil, and is used as a raw material for first-generation products such as ethylene, propylene, gasoline, xylene (BTX), and others. However, due to the different sources of crude oil, differences in naphtha composition impact the quality of conversion processes. Parameters such as pressure, charge flow, and temperature need to be adjusted for conversion efficiency. This work aims to compare naphtha samples from different origins, through the analysis of distillation curve (ASTM D86), density (ASTM D4052), total sulfur (ASTM D4294), and n-paraffins, iso-paraffins, olefins, naphthene, and aromatics (PIONA, ASTM D5134). Among these parameters …

Introduction To Bioaerosols Assessment And Control, 2nd Edition, Cheri Marcham, John (Jack) Springston

Publications

• Risk Assessment
• Assessment for the Presence of Bioaerosols
• Sampling
• Purpose/ Necessity
• Interpretation Controls
  • Ventilation
  • Other Controls

Study Of The Graphene Energy Absorbing Layer And The Viscosity Of Sodium Alginate In Laser-Induced- Forward-Transfer (Lift) Bioprinting, Shuqi Zhou, Jianzhi Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Laser induced forward transfer (LIFT) bioprinting has been viewed as a new and actively developed three-dimensional bioprinting technology due to its high accuracy and good cell viability. The printing quality is highly dependent on the jet formation and its stability in the LIFT bioprinting process. The objective of this study is to investigate the effect of a graphene Energy Absorbing Layer (EAL) and alginate hydrogel (SA) (w.t. 1% and 2%) viscosity on jet generation in the LIFT bioprinting process. Since SA exhibits a shear-thinning behavior, it is a non-Newtonian fluid. The effect of EAL thickness and SA’s viscosity were addressed …

Queueing System With Potential For Recruiting Secondary Servers, Srinivas Chakravarthy, Alexander N. Dudin, Sergey A. Dudin, Olga S. Dudina

Industrial & Manufacturing Engineering Publications

In this paper, we consider a single server queueing system in which the arrivals occur according to a Markovian arrival process (MAP). The served customers may be recruited (or opted from those customers’ point of view) to act as secondary servers to provide services to the waiting customers. Such customers who are recruited to be servers are referred to as secondary servers. The service times of the main as well as that of the secondary servers are assumed to be exponentially distributed possibly with different parameters. Assuming that at most there can only be one secondary server at any given …

A New Course In Defense Manufacturing – An Introduction To Shipbuilding, Alley C. Butler

Manufacturing & Industrial Engineering Faculty Publications and Presentations

This paper discusses the development and deployment of a new course in DMEI (Defense Manufacturing Engineering Innovation) titled, “Introduction to Shipbuilding.” This course has been taught using Zoom since 2021 at both the University of Texas Rio Grande Valley, a Hispanic Serving Institution, and Virginia State University, a Historically Black University. After a brief literature review, an outline of the course is presented with topics including the maritime market for shipbuilding, economics of shipbuilding, the classification agencies, metallurgy and welding processes, ship structure and assembly, shipyard layout, accuracy control, and shipbuilding planning and scheduling. Difficulties in obtaining an appropriate textbook …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …