Operations Research, Systems Engineering and Industrial Engineering Commons^™

Examination And Utilization Of Rare Features In Text Classification Of Injury Narratives, Hsin-Ying Huang

Open Access Dissertations

Thanks to the advances in computing and information technology, analyzing injury surveillance data with statistical machine learning methods has grown in popularity, complexity, and quality over recent years. During that same time, researchers have recognized the limitations of statistical text analysis with limited training data. In response to the two primary challenges for statistical text analysis, dimensionality reduction and sparse data, many studies have focused on improving machine learning algorithms. Less research has been done, though, to examine and improve statistical machine learning methods in text classification from a linguistic perspective.

This study addresses this research gap by examining the …

Impact Of Rfid Information-Sharing Coordination Over A Supply Chain With Reverse Logistics, Juan Jose Nativi Nicolau

Open Access Dissertations

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the potential to enable decentralized supply chain coordinate their information. Even though there are research that address RFID on traditional supply chain, few researches address how to coordinate RFID information sharing in a green supply chain. We study, through simulation experiments, two types of RFID information-sharing coordination under different configurations related …

Metrics Of Critical Pair Identification, Zixu Zhang

Open Access Theses

Critical Pair Identification works as a potential assistive tool for human air traffic controllers by identifying potentially dangerous situations that are not detected by proposed automated separation assurance systems. This concept specifically considers conflicts that might arise if aircraft unexpectedly deviate from their planned flight path in the near future. Five metrics of the critical pair concept, Critical Pair Count, Time to Risk Exposure, Lead Time, Risk Exposure Duration and Blunder Sensitivity Index, have been developed and mathematically defined to characterize the safety level of an aircraft pair or a volume of air space. Algorithm that computes proposed metrics is …

Taming Tail Latency For Erasure-Coded, Distributed Storage Systems, Jingxian Fan

Open Access Theses

Nowadays, in distributed storage systems, long tails of responsible time are of particular concern. Modern large companies like Bing, Facebook and Amazon Web Service show that 99.9th percentile response times being orders of magnitude worse than the mean. With the advantages of maintaining high data reliability and ensur- ing enough space eciency, erasure code has become a popular storage method in distributed storage systems. However, due to the lack of mathematical models for analyzing erasure-coded based distributed storage systems, taming tail latency is still an open problem.

In this research, we quantify tail latency in such systems by deriving a …

Best Matching Processes In Distributed Systems, Mohsen Moghaddam

Open Access Dissertations

The growing complexity and dynamic behavior of modern manufacturing and service industries along with competitive and globalized markets have gradually transformed traditional centralized systems into distributed networks of e- (electronic) Systems. Emerging examples include e-Factories, virtual enterprises, smart farms, automated warehouses, and intelligent transportation systems. These (and similar) distributed systems, regardless of context and application, have a property in common: They all involve certain types of interactions (collaborative, competitive, or both) among their distributed individuals—from clusters of passive sensors and machines to complex networks of computers, intelligent robots, humans, and enterprises. Having this common property, such systems may encounter common …

Service-Level Based Response By Assignment And Order Processing For Warehouse Automation, Zijian He

Open Access Theses

Along with tremendous growth of online sales in this Internet era, unprecedented intensive competition in shortening the delivery time of orders has been occurring among several major online retailers. On the other hand, the idea of customer-oriented service creates a trend of diversified pricing strategy. Different price options are offered to cater to diversified needs of customers. It has become an urgent need for online sales industries to provide the differentiated service levels for different classes of customers with different priorities based on the charging prices and resource constraints of the supply network.

In response to the challenges mentioned above, …

Markov-Based Ranking Methods, Baback Vaziri

Open Access Dissertations

Ranking methods are an essential tool to help make decisions. This dissertation document examines different aspects of the theory and application of pairwise comparison ranking methods, specifically those that use Markov chains. First, a new method is developed to solve a traditional recruiting problem, and is shown to improve the predictive power of its ranking. Next, modifications are made to an existing method that theoretically improves the reliability, while maintaining the rank integrity. Last, a framework is developed that defines a fair and comprehensive ranking method, and several popular methods are evaluated in their ability to adhere to the said …

The Casualty Transportation Of Ebola Outbreak In Liberia: A Simulation Study, Hyejin Cho

Open Access Theses

In this paper, we have solved the unique problem of casualty transportation problem under Ebola by developing dynamic policies for vehicle routing in order to provide practical decision support. The objective of the proposed model is to minimize the total transmission risk. We describe the problem with real- constraints and parameters based on the empirical data of the 2014 Ebola outbreak in Liberia. The casualty transportation problem is a variant of Dynamic Pick-up and Delivery Problems (DPDP), in which a vehicle is dispatched to demand location in real time and it then transports the demands to the aimed area (destination). …

Developing Agent-Based Simulation Models Of Task Performance Of Cognitively Diverse Teams, Megan Marie Nyre

Open Access Theses

Team-oriented work dominates industry, government, and academic areas with the goal of solving increasingly complex problems. However, the scope and external validity of traditional human factors research is inherently limited by the time and resources required to conduct laboratory studies. The model described in this thesis integrates simulation with human factors by providing an operationalized model that incorporates cognitive diversity and domain expertise. Convergence and functionality of the model have been established through a series of analyses, and a clear path for future research has been identified. By integrating simulation methods into human factors subject areas, researchers may be able …

Enhancing A Flight Dispatcher Display For Safer Flight Operations, Jeongjoon Boo

Open Access Theses

This study assesses capability of flight dispatchers to adopt enhancements on their display that enables detection of flights in abnormal activities and investigation of the causes. Three approaches were used. First, the expected function for enhancements was designed by collecting information from different places about what technologies are available for consideration. Second, hierarchical task analysis was conducted based on data collected by interviewing a former flight dispatcher in order to assess operational capability to handle the enhancement. Third, based on the results of first two approaches, a display prototype that includes the enhancement was developed and evaluated for usability and …

Conflict And Error Management: A Case In The Furniture Industry, Glenn Candranegara

Open Access Theses

The purpose of this study is to investigate and provide tools for the furniture industry, for detecting and preventing damage from propagating errors. Many of the errors cascading in a furniture manufacturing facility are typically detected only after the original process that causes the error had already caused errors. Previous research has developed and validated theoretical methods, such as CEPD, to prevent and detect errors and conflicts. This thesis is the first effort to implement the logic of CEPD in the furniture industry. There are four relevant measures that are analyzed and improved in this thesis; they are preventability, reliability, …

Improving Product Design Phase For Engineer To Order (Eto) Product With Knowledge Base Engineering (Kbe), Hanhdung Thi Dinh

Open Access Theses

In industry currently Computer Aided Design (CAD) is an important tool for the modification, analysis, or optimization of the 3D virtual environment that replicates the physical product. CAD software is an efficient and reliable tool. However, as globalization increases customer demands, this process needs to be faster and more efficient to accommodate changing product design situations, especially for Engineer-to- Order (ETO) products. ^ The traditional method of product design process is to operate CAD software without argumentation. Design engineers create CAD prototypes and drawings based on available knowledge and information which comes from engineering experts, company standards, industrial practices as …

Calculus For Decision Systems, Jorge Antonio Samayoa Ranero

Open Access Dissertations

The conceptualization of the term "system" has become highly dependent on the application domain. What a physicist means by the term system might be different than what a sociologist means by the same term. In 1956, Bertalanffy [1] defined a system as " a set of units with relationships among them". This and many other definitions of system share the idea of a system as a black box that has parts or elements interacting between each other. This means that at some level of abstraction all systems are similar, what eventually differentiates one system from another is the set of …

Embodied Interaction With Visualization And Spatial Navigation In Time-Sensitive Scenarios, Yu-Ting Li

Open Access Dissertations

Paraphrasing the theory of embodied cognition, all aspects of our cognition are determined primarily by the contextual information and the means of physical interaction with data and information. In hybrid human-machine systems involving complex decision making, continuously maintaining a high level of attention while employing a deep understanding concerning the task performed as well as its context are essential. Utilizing embodied interaction to interact with machines has the potential to promote thinking and learning according to the theory of embodied cognition proposed by Lakoff. Additionally, the hybrid human-machine system utilizing natural and intuitive communication channels (e.g., gestures, speech, and body …

Designing A Sustainable And Transferable Inventory Management System For Small Healthcare Facilities, Shree Frazier

Open Access Theses

Managing the costs of supplies within healthcare facilities has been a task that has plagued the health industry for many years. Many facilities are accustomed to using a par system approach. This involves bringing an inventory item to an amount sufficient for daily operation. This method often requires daily inspection by a healthcare worker, which reduces his/her time spent performing value added tasks. Employees at small healthcare facilities have multiple responsibilities, therefore they cannot afford to spend much time on inventory management. A proposed approach is the Kanban method, which allows for strict monitoring of inventory items without the need …

Application Of Bayesian Networks In Consumer Service Industry, Yuan Gao

Open Access Theses

Gao, Yuan. M.S.I.E., Purdue University. December 2014. Application of Bayesian Networks in Consumer Service Industry. Major professor: Vincent G. Duffy The purpose of the present study is to explore the application of Bayesian networks in the consumer service industry to model causal relationships within complex risk factor structures using aggregate data. An analysis of the Hawaii tourism market was conducted to find out how visitor characteristics affect their behavior and experience as consumers during the trips, and influence the tourism market outcomes represented by measurable factors. Two hypotheses were proposed regarding the use of aggregate data and the influence of …

Designing Sustainable Mentoring Programs: Examining The Role Of Social Community In The Stem College Student Experience, Joi-Lynn Mondisa

Open Access Theses

In order to begin to understand how to design programs that promote community development and produce beneficial outcomes for community members, we must first define the elements and functions of such a community. In this thesis, I define social community as an environment where like-minded individuals engage indynamic, multidirectional interactions that facilitate social support . Using a human-integrated systems approach, I propose a social community model for STEM minority mentoring programs to understand how a community's design plays a role in the learning and enrichment of its members. The social community model is comprised of three main components: program …

Dissolution Rate And Mechanism Of Metals In Molten Aluminum Alloy A380, Hengyu Zhu

Open Access Theses

Shot sleeve is a very easily worn out part in a high-pressure die-casting machine due to serious dissolution of the area underneath the pouring hole. It is because during a normal pouring process, the high temperature molten aluminum will impact and dissolve that area of the shot sleeve by complex chemical and physical process. Rotation experiment was carried out to H13 and four kinds of refractory metal samples. SEM and EDS pictures were taken in order to investigate the microstructure and the dissolution mechanism of these materials. This suggests a high strength niobium is an ideal material for that area …

Evaluating Intensity As A Controller Function For Nextgen Scenarios With Increased Capacity, Caitlin Anne Surakitbanharn

Open Access Theses

Automated separation assurance is the most mature concept to handle increasing airspace traffic and capacity needs, yet the system lacks a way to pre-emptively identify aircraft separation problems. The intensity control measure looks to find situations where if an aircraft pair makes an unplanned change in heading or altitude at the wrong moment, an unrecoverable situation arises. This research analyzes static, open loop air traffic data in an en-route sector to determine how many high intensity aircraft pairs (HIP) exist per minute, and if the intensity measure is a safely manageable function for air traffic controllers. It is found that …

Acquisition, Retention And Transfer Of Heavy Equipment Operator Skills Through Simulator Training, Chung Yin So

Open Access Dissertations

Initiatives and collaborations among heavy construction equipment manufacturing companies and training technology firms to develop and employ simulators for varied training purposes are becoming commonplace. However, human factors research on simulator training for operators of construction equipment is still sparse. For simulator training to be effective, it is necessary to understand how skills are learned using the simulator, how those skills are transferred to other tasks, devices, and real scenarios, and how well skills are retained after simulator training. ^ This research is on skill development, specifically as it applies to operator training for two specific types of heavy construction …

A New Integrated Design Framework For The Facility Layout Problem, Kyle F. Thomas

Open Access Theses

This thesis proposes a new integrated design framework for solving facility layout problems (FLP). The most popular existing framework, Muther's Systematic Layout Planning (SLP) does not address the variety of design goals associated with facility layout problems and is highly manual and so time consuming to perform. Furthermore, the SLP framework does not help the designer select a modeling tool to use in developing design alternatives, either by defining what a requisite model would include, or explicitly suggesting ones from literature. With the advancements made in academic research and computational capabilities since the development of the SLP framework, a new …

Multimodal Perception Of Histological Images For Persons Blind Or Visually Impaired, Ting Zhang

Open Access Theses

Currently there is no suitable substitute technology to enable blind or visually impaired (BVI) people to interpret visual scientific data commonly generated during lab experimentation in real time, such as performing light microscopy, spectrometry, and observing chemical reactions. This reliance upon visual interpretation of scientific data certainly impedes students and scientists that are BVI from advancing in careers in medicine, biology, chemistry, and other scientific fields. To address this challenge, a real-time multimodal image perception system is developed to transform standard laboratory blood smear images for persons with BVI to perceive, employing a combination of auditory, haptic, and vibrotactile feedbacks. …

Solvent System Selection For Xylooligosaccharides Separation By Centrifugal Partition Chromatography Using Conductor-Like Screening Model For Real Solvents, He Zhang

Open Access Theses

The production of value-added, bio-based industrial commodity chemicals is an important area in science right now and this study provides an initial step in the recovery of bio-based chemicals from hemicellulose. Hemicellulose is a long chain polymer mostly consisting of xylose, which is a five-carbon sugar, and a variety of other compounds that are ubiquitous in plant life. The hemicellulose polymer chain can be depolymerized into smaller components, called xylooligosaccharides (XOS) with different chain lengths of xylose linked by beta-1-4 glycosidic bonds, using either hot water, or dilute sulfuric acid. The xylooligosaccharides can then be purified from one another from …

Optical Direct-Write Nanolithography Based On Self-Assembled Resist, Meghana Akella

Open Access Theses

Holographic display is being developed for next generation mobile phones. However, manufacturing of miniature gratings for the holographic projectors cost a few thousand dollars today, not making the concept practical for commercial purposes. In this thesis, we discuss the feasibility of self-assembled nanoparticles to manufacture holographic gratings cost-effectively and at the nanoscale. Using our approach, the gratings can be manufactured at the scale of 20nm and the cost per chip is expected to cost a few dollars.^ In this thesis, a hydrophobic SAM was used to modify the surface of silicon. Direct-write UV laser lithography was used for photothermal patterning …

The Multi-Depot Minimum Latency Problem With Inter-Depot Routes, Timothy W. Duket

Open Access Theses

The Minimum Latency Problem (MLP) is a class of routing problems that seeks to minimize the wait times (latencies) of a set of customers in a system. Similar to its counterparts in the Traveling Salesman Problem (TSP) and Vehicle Routing Problem (VRP), the MLP is NP-hard. Unlike these other problem classes, however, the MLP is customer-oriented and thus has impactful potential for better serving customers in settings where they are the highest priority. While the VRP is very widely researched and applied to many industry settings to reduce travel times and costs for service-providers, the MLP is a more recent …

Influence Of Referential Coding In A Choice Task Performed In A Simulated Driving Cockpit, Aiping Xiong

Open Access Theses

Driving and other tasks performed by the driver of a vehicle are spatial. Thus, it is important to understand how the driver represents the spatial environment. In laboratory studies, the Simon task is used to study spatial coding. Participants are to make a left or right response to a nonspatial stimulus feature, but the stimulus can occur in a left or right position. The Simon effect is that responses are faster when the stimulus location corresponds with the response location. That effect is not usually found for a go/no-go task in which only one response is made to one of …

Exploratory Study In Container Loading Embraer 190 Aircraft, Ryan H. Auyeung

Open Access Theses

Since the dawn of aviation, cargo loading on aircraft has remained virtually constant. A person and a baggage cart together have been the primary method of loading baggage on to aircraft, and this practice has virtually remained unchanged, especially for narrow body aircraft. This study explores the question of whether a loading device, designed for Embraer 190 aircraft, can increase economic efficiency by reducing aircraft turnaround times, increasing aircraft utilization and reducing work hours. In the course of designing a theoretical loading device for an Embraer 190, various literature ranging from elaborate articulating conveyor belts, to the use of LD3-45W …

Detecting Air Traffic Controller Interventions In Recorded Air Transportation System Data, Yul Kwon

Open Access Theses

In this study, I propose a systematic method of detecting aircraft deviation due to air traffic controller (ATC) intervention. The aircraft deviations associated with ATC interventions are detected using a heuristic algorithm developed from analyzing the actual positions of an aircraft to its filed flight plan when the aircraft trajectories were identified as having an encounter in a loss-of-separation incident. An actual (closed-loop) flight trajectory of the Cleveland Air Route Traffic Control Center (ZOB ARTCC) was collected from the FlightAware database. This was compared with the corresponding planned (open-loop) trajectory dataset generated by the Microsoft© Flight Simulator X (FSX). I …

Modeling And Optimization Of Care Transitions, Yuming Mo

Open Access Theses

More than 145 million people live with at least one chronic condition, and almost half of them have multiple conditions. As a result, many managed care and integrated delivery systems have taken a great interest in alleviating the many deficiencies in managing the current care system that spans across various care delivery settings. In addition, many Americans have to rely on some social health insurance plan to cover her care expenses. As a result, these patients often may not been sufficiently cured but have to be transitioned to less expensive but less medically intensive facilities, due to the increasing pressure …

A Comparative Analysis Of An Original And A Post-Hoc Application Of Lean Six Sigma Methodology, Jin Qiu

Open Access Theses

Current society develops faster and faster every day with customers' demands increasing rapidly. Decreasing time for product development and enhancing customer satisfaction are becoming more significant. In the business world, there is no industry that could exist without an efficient supply chain. In the fierce competitive environment of today, the supply chain must address potential problems and risks that may exist and assure continuous improvement.

One common supply chain management practice in many industries is to apply lean methodology to the supply chain model in order to maximize the customers' value and eliminate waste. By eliminating waste, the process can …